Reproductive biology, artificial propagation and larval rearing of two freshwater eels, Monopterus cuchia and Mastacembelus armatus

Studies on reproductive biology and artificial propagation including larval rearing of freshwater mud eel, Monopterus cuchia and spiny eel, Mastacembelus armatus were attempted. The gonadosomatic index (GSI) of mud eel ranged from 0.41 (August) to 5.52 (June) in males and 0.53 (August) to 7.61 (June) in females. In both cases the GSI showed a peak in June. Fecundity ranged from 228 (TL - 396 mm; W - 78g) to 5510 (TL - 865 mm; W - 630 g). In case of spiny eel, the GSI varied from 0.65 (August) to 8.30 (July) in males and 0.70 (August) to 10.46 (July) in females. GSI showed single peak in July. Fecundity ranged from 570 (TL - 240 mm; W - 30 g) to 10870 (TL - 601; W - 350g). Histology of the testes and ovaries of the eels were carried out to investigate the gonadal development stages during the reproductive months (August to November 2003). In case of male M. cuchia, the secondary primordial germ cells, primary spermatogonium, some spermatogonia A and clone of spermatogonium B in testis were observed in September. In October-males different sized lobules having spermatogonia, spermatocytes and spermatids were observed. In the ovary of M. cuchia, polygonal shaped oocytes were seen during September. The oogonia were reduced with dense and irregular shaped during October. Numerous pycnotic cells were visible during November. In male M. armatus numerous broken lobule walls were found in testes during September. In October, abundant primary germ cells, pycnotic nests of degenerating cells, spermatogonia and spermatids were observed. In females, ovaries had distinct yolk vesicles stage and yolk granules stages in August. In September, the follicular cells of the oogonia were ruptured, shrunk forming irregular shaped in October. Oogonia were also shrunk with thin, irregular shaped structure but broken parts of the ruptured follicular cells were scattered in case of M. armatus. Experimental attempts on artificial propagation indicated that both freshwater eels were difficult to breed using inducing agents like pituitary glands (PG) of 10, 20, 50, 100 and 150 mg per kg of body weight. Same doses were used for both sexes with equal sex-ratio. In both cases, brood fish died at higher doses of injection given at 100 and 150 mg PG/kg bodyweight. However, M. cuchia breed naturally in cisterns when provided with water hyacinths and tunnel in muddy bottom. M. cuchia fed with chopped cooked fish attained a mean weight of 18.75 ± 2.3 g and cent percent survival. While in case of M. armatus best growth by weight (12.0 ± 2.48 g) and cent percent survival were achieved using chopped raw fish. Car tyre was observed as best shelter for attaining the mean weight gain 22.53 ± 2.24 g and cent percent survival of M. cuchia. While PVC pipe was found to be the best shelter for M. armatus, where it attained the mean weight of 12.73 ± 1.88 g and cent percent survival.

Consumption pattern and consumer preference for value-added fish and fish products in north zone of India

Present paper attempts to analyze consumption pattern and consumer preferences towards value-added fish and fish products in north zone of India. Results reveal that socio economic variables affect consumption of value-added fish and fish products. A total of 49 percent respondents were of middle age group (35 to 50 years). All were literates except 7% from the rural area. All were purchasing fish at least once in 15 days. A total of 90% respondents in rural, 11% in semi urban and 50% in urban area were unaware of value-added fish and fish products. About 10% of respondents had consumed it, out of which most were from urban area. Demand analysis by Cobb Douglas (CD) Demand function revealed that when price of fish, price of the substitutes, income of family and family size were used as independent variables, variation in demand of fish explained by CD Demand function was about 39% in urban area, 24% in semi urban area and 22% in rural area. From Garette ranking technique major problems in fish consumption found were irregular supply, lack of fresh fish, high price and presence of bones in fish. While lack of awareness, unavailability, no preference and unacceptable taste were major problems for consumption of value-added fish and fish products.

More evidence for non-maternal inheritance of mitochondrial DNA?

Background: A single case of paternal co-transmission ofmitochondrial DNA (mtDNA) in humans has been reported so far. Objective: To find potential instances of non-maternal inheritance of mtDNA. Methods: Published medical case studies (of single patients) were searched for irregular mtDNA patterns by comparing the given haplotype information for different clones or tissues with the worldwide mtDNA database as known to date-a method that has proved robust and reliable for the detection of flawed mtDNA sequence data. Results: More than 20 studies were found reporting clear cut instances with mtDNAs of different ancestries in single individuals. As examples, cases are reviewed from recent published reports which, at face value, may be taken as evidence for paternal inheritance of mtDNA or recombination. Conclusions: Multiple types (or recombinant types) of quite dissimilar mitochondrial DNA from different parts of the known mtDNA phylogeny are often reported in single individuals. From re-analyses and corrigenda of forensic mtDNA data, it is apparent that the phenomenon of mixed or mosaic mtDNA can be ascribed solely to contamination and sample mix up.

Satellite formation in drop-on-demand printing of polymer solutions

High speed photographic images of jets formed from dilute solutions of polystyrene in diethyl phthalate ejected from a piezoelectric drop-on-demand inkjet head have been analyzed in order to study the formation and distribution of drops as the ligament collapses. Particular attention has been paid to satellite drops, and their relative separation and sizes. The effect of polymer concentration was investigated. The distribution of nearest-neighbour centre spacing between the drops formed from the ligament is better described by a 2-parameter modified gamma distribution than by a Gaussian distribution. There are (at least) two different populations of satellite size relative to the main drop size formed at normal jetting velocities, with ratios of about three between the diameters of the main drop and the successive satellite sizes. The distribution of the differences in drop size between neighbouring drops is close to Gaussian, with a small non-zero mean for low polymer concentrations, which is associated with the conical shape of the ligament prior to its collapse and the formation of satellites. Higher polymer concentrations result in slower jets for the same driving impulse, and also a tendency to form ligaments with a near-constant width. Under these conditions the mean of the distribution of differences in nearest-neighbour drop size was zero.

Studies on the egg quality of Penaeus monodon Fabricius based on morphology and hatching rates

Eggs of P. monodon are classified into 5 different types on the basis of morphological criteria and hatching rates: A sub(1) eggs, which undergo normal development with 58% hatching rate; A sub(2) eggs, which show delayed and/or abnormal development with 32% hatching rate; B eggs, which are unfertilized and characterized by irregular cytoplasmic formation; C eggs, which are unfertilized and show no change in appearance; and D eggs, which are unfertilized and show extensive bacterial presence. The establishment of a highly linear relationship between percent A sub(1) eggs and hatching rate provides a useful tool to aid the hatchery technician in determining which spawnings to reject outright and which to rear through the larval and post-larval stages.

Plerchis heterorchis N. sp. (Digenea: Acanthocolpidae Luhe, 1909) from fishes Lutjanus johnii and Otolithus argenteus of Karachi coast, Pakistan

A new species of trematodes Pleorchis heterorchis is described from the fishes Lutjanus johnii and Otolithus argenteus of Karachi coast. The new species is characterized by having a lanceolate body with a notch at the middle of the posterior end of the body. Body surface is smooth, ventral sucker rounded, situated at the anterior middle region of the body, pre-pharynx is well developed, widened posteriorly, pharynx muscular, oesophagus short, intestine H-shaped with anterior arms much shorter than the posterior, intestinal bifurcation almost in the middle of fore body, anterior caeca wide and short extending as far as anterior limit of pharynx. Posteriorly caeca reach to posterior end of the body with no lateral out pocketing. Testes 44 in number, intercecal arranged in 2 parallel rows, sub-globular, entire to slightly irregular, almost of same sizes extending immediately from posterior of the ovary to anterior of excretory vesicle. Cirrus pouch overlaps the ventral sucker, extends into hind body, terminating above the ovary, containing bipartite seminal vesicle, pars prostatica and ejaculatory duct. Genital pore behind the intestinal bifurcation and pre-acetabular. Ovary pre-testicular, consists of 16 follicles of varying sizes. Vitellaria lateral, follicular, extending from post bifurcal to posterior extremity. Excretory vesicle reaches to the posterior level of last pair of testes.

Determination of bioaccumulation and microscopic survey of LAS pollutant effect on the liver, kidney and gill tissues of Rutilus frisii kutum in Caspian sea

Linear alkylbenzene sulfonate (LAS) are widely used in detergent industry. Due to contaminants entering the water, and the effects of their accumulation in fish, LAS, has a great importance in environmental pollution. In the present study, accumulation of LAS and its histological effects on gill tissue, liver and kidney of Caspian kutum (Rutilus frisii kutum) were studied. Caspian kutum is the most important and most valuable teleosts of the Caspian Sea. Due to releasing Caspian Kutum in rivers and Anzali Lagoon and unlimited entry of wastewater to the aquatic ecosystem, research on the impact of LAS on Caspian kutum is important. In the present study, fish exposed to sublethal concentrations of LAS (0.58, 1.16 and 2.32 mg/l) for 192 hours. Control treatments with three replicates at 0, 24, 48, 72, 96 and 192 hours were done. For assessments of the histological effects of LAS, tissue sections prepared and by using Hematoxylin - Eosin were stained, then the prepared sections, examined by light microscopy. For determination of the bio accumulation of LAS, the soxhlet extraction and solid phase extraction was performed to determine the amount of LAS using HPLC with fluorescence detector. According to results average of bioconcentration factor and LAS concentrations in fish had reached stable levels after approximately 72 h and thus represented steady state BCF values in this species. The value of steady-state bio-concentration factor of total LAS was 33.96 L.Kg- 1 and for each of the homologous C10-n-LAS, C11-n-LAS, C12-n-LAS and C13-n- LAS were 3.84, 6.15, 8.58 and 15.57 L.Kg-1 respectively. According to the results obtained in gills exposed to LAS, histopathological alteration include hypertrophy, lifting of lamella epithelium, edema, clubbing of lamellae hyperplasia, lamellar fusion and aneurysm were seen. In liver tissue exposed to three concentrations of LAS, congestion and dilation of sinusoids, irregular-shaped nuclei and degeneration in the hepatocyte, vacuolar degeneration and necrosis were observed. In kidney exposed to three concentrations of LAS, reduction of the interstitial haematopoietic tissue, degeneration in the epithelial cells of renal tubule, tubular degeneration, necrosis, shrinkage and luminal occlusion were observed. According to the results the most alteration due to exposure to LAS was seen in the gill tissue. None of the control samples showed histological effects of LAS.

Survey of biosystematic and sexual reproductive physiology in Holothuroidea on Hormozgan Province

Sea cucumbers belong to phylum Echinodermata, order Holothuroidea are an abundant and diverse group of Invertebrates, with over 1400 species occuring from the intertidal to the deepest oceanic trenches. Sea cucumbers are important components of the food chain in temperate and coral reef ecosystems and they play an important role as deposite feeders and suspension feeders. Rapid decline in populations may have serious consequences for the survival of other species that are part of the same complex food web,as the eggs, larve and juveniles constitute an important food source for the other marine species including crustaceans, fish and mollusks. In addition sea cucumbers are often called the earthworms of the sea, because they are responsible for the extensive shifting and mixing of the substrate, and recycling of detrital matter. Sea cucumbers consume and grind sediment and organic material into finer particles , turning over the top layers of sediment in lagoons , reefs and other habitats and allowing the penetration of oxygen. While the taxonomy of the holothurian families is generally well known , the distinction of similar species is difficult. There are relatively few holothurian taxonomist.Most sea cucumber species can be identified by Holothurin taxonomists by using the calcareous skeletal ossicles found in the body wall. In this study , at first a sea cucumber from Kish island in Persian gulf has recognized. Individuals collected from west and east extend far away into north and south of coral reefs by diving. I have checked them morphologically and anatomically.Then with key to the orders of the Holothuroidea, They belong to the Aspidochirotida with key to the families of Aspidochirotida, they were in Stichopodidae families and with key to the genus of Stchopodidae, they were Stichopus. Then ossicles were extracted at National Museum of Natural History, by Dr David Pawson. The ossicles were measured on a transect across a slide prepared from the mid-dorsal region of each specimen.The one we have in the shallow waters of Kish island, is Stichopus hermanni, a massive holothurian, body broad, considerably flattened ventraly ,the dorsal side slightly arched and the lateral sides almost vertical; body wall fairy thick and soft ; mouth subterminal; anus central; tentacles usually 20 in number of length and leaf shaped. Numerous ossicles consisting of table with large discs having usually 7 to 15 peripheral holes, but often irregular or incomplete and spire of moderate height ending in a group of spinelets, rosettes of variable development, and c-shaped rods. Color (exept papillae)partly remained after preservation in alcohol which is found at the depth of 4 to 8 meters, on coral reef. Furthermore, the sexual reproductive cycle was described using standard methods. Gonads were removed and transferred to Bouin's fixative for four weeks and then processed according to standard embedding technique. To prevent the loss of tubule contents during embedding, the tubule sections, were cut well beyond the segment selected for sectioning. For each individual, six sections, each section with 5µm diameter by microtome were cut from tubules. These sections were first placed on gelatin coated slides (the gelatin was heated to 42°c) and then transferred to the oven at 37°c for one hour. This technique usually prevents the fragil tubules from breaking and the loss of gametes. The slides were stained with Eosin and Hematoxylin, and good resolution of the various cell types achieved.A second series of slides was stained with the Periodic Acid Schiff(PAS) to identify polysaccharides(glycogen). Monthly sampling was occurred.The sexual reproductive cycle was defined through the combined use of these criteria: Monthly percentages of the gonad stages for each sex, the monthly gonad index (GI) , given as the ratio of the wet gonad weight (G) to the dray weight (DW)and the monthly percentage of individuals that undetermined sex. The gonad consists of two tufts of tubules on which saccules develop. Gonadal development was classified into five stages: post spawning, recovery, growth, advanced growth, and mature stage that were adapted from the earlier studies of holothurians. Histological preparations showed that the sex of larger individuals could be identified by the presence of oogonia and young oocytes in females, and spermatogonic stages in males.The mean diameter of the tubules and gonadal mass follow annual cycles, increasing from late winter through spring, and dropping abruptly after spawning in the summer. Gametogenesis is generally a prolongate process and begins in March. By summer the ovarian tubules contain oocytes with diameter of 120-240 pm and the testicular tubules contain an abundance of spermatozoa (diameter 5-6 gm ).Following spawning the predominant activity within the spent tubules is phagocytosis of the residual gamets.The active phase of gametogenesis (March to July), coincides with an increasing photoperiod regim, and an accelerated gametogenesis occurs in July when temperature is high. Throughout the year, the gonad of Stichopus hermanni is larger in males than in females, and this is due to the number of tubules in the testis rather than to tubules length or diameter.

Numbers of migratory waterbirds at Lake Lashihai, China

Between October 1999 and April 2000, WC surveyed the waterbirds at Lake Lashihai, China. A total of 52 species were recorded, of which one species was a resident, 34 were winter visitors, and 17 were passage migrants. Species richness was highest in November. Passage migrants mainly occurred in October, November, and April, and they stayed longer at the lake during their autumn migration than during the spring migration. The seasonal distribution pattern of total numbers of all waterbirds was bimodal. One peak occurred between late December and early January, and the other in middle March. The seasonal distribution patterns of 15 common species have been classified a. bimodal, unimodal, or irregular. The numbers of five common species were variable in middle winter, and their numerical Change in contiguous weeks were more than 30%, suggesting that local movements might be frequent.

A new species of sisorid catfish genus Glyptothorax (Teleostei: Sisoridae) from Salween drainage of Yunnan, China

A new species of the genus Glyptothorax, Glyptothorax obliquimaculatus sp. nov. is described from the Xiaohei River, a tributary of the Nanting River, Salween drainage, in southwestern Yunnan province, China. This new species can be distinguished from its congeners by the following combination of characteristics: unculiferous ridges of the thoracic adhesive apparatus extending anteriorly onto the gular region; body with irregular dark blotches scattered along lateral surface (blotches mostly oblique); skin smooth on head and body; dorsal spine smooth without serrations on its posterior margin; lips smooth; posterior margin of pectoral spine with 7-8 serrations; dorsal-fin base 11.0-13.2% SL; pectoral-fin length 15.6-19.6% SL; depth of caudal peduncle 8.6-9.8% SL; head width 19.1-24.0% SL; nasal barbel length 23.3-33.3% HL.

Eliminating discharge imbalances in predicting shallow water flows with shocks

The shallow water equations are widely used in modelling environmental flows. Being a hyperbolic system of differential equations, they admit shocks that represent hydraulic jumps and bores. Although the water surface can be solved satisfactorily with the modern shock-capturing schemes, the predicted flow rate often suffers from imbalances where shocks occur, eg the mass conservation is violated by failing to maintain a constant discharge rate at every cross-section in a steady open channel flow. A total-variation-diminishing Lax-Wendroff scheme is developed, and used to demonstrate how to achieve an exact flux balance. The performance of the proposed methods is inspected through some test cases, which include 1- and 2-dimensional, flat and irregular bed scenarios. The proposed methods are shown to preserve the mass exactly, and can be easily extended to other shock-capturing models.

How PEDOT:PSS solutions produce satellite-free inkjets

Satellite droplets are unwanted in inkjet printing and various approaches have been suggested for their reduction. Low jetting speeds limit applications of the process. Added surfactants for wetting and conductivity enhancement may help but dynamic surface tension effects may counteract improvements. A higher fluid viscosity delays ligament break-up, but also leads to slower jets, while viscoelasticity reduces satellite formation only in certain cases. We show here that aqueous solutions of PEDOT:PSS (1:2.5 by weight) are strongly shear-thinning. They exhibit low viscosity within the printing nozzle over a wide range of jet speeds, yet rapidly (<100 μs) recover a higher viscosity at the low shear rates applicable once the jet has formed, which give the benefit of delayed satellite formation. The delay over a 0.8 mm stand-off distance can be sufficient to completely suppress satellites, which is significant for many printing applications. © 2012 Elsevier B.V. All rights reserved.

Application of gel-casting to the fabrication of 1-3 piezoelectric ceramic-polymer composites for high-frequency ultrasound devices

A modified gel-casting technique was used to fabricate a 1-3 piezoelectric ceramic/polymer composite substrate formed by irregular-shaped pillar arrays of small dimensions and kerfs. This technique involves the polymerization of aqueous piezoelectric (PZT) suspensions with added water-soluble epoxy resin and polyamine-based hardener that lead to high strength, high density and resilient ceramic bodies. Soft micromoulding was used to shape the ceramic segments, and micropillars with lateral features down to 4 m and height-to-width aspect ratios of ∼10 were achieved. The composite exhibited a clear thickness resonance mode at approximately 70 MHz and a k eff ∼ 0.51, demonstrating that the ceramic micropillars possess good electrical properties. Furthermore, gel-casting allows the fabrication of ceramic structures with non-conventional shapes; hence, device design is not limited by the standard fabrication methods. This is of particular benefit for high-frequency transducers where the critical design dimensions are reduced. © 2012 IOP Publishing Ltd.

EEFIT mission to Haiti following the 12th January 2010 earthquake

The Mw= 7.2 Haiti earthquake of 12th January 2010 caused extensive damage to buildings and other infrastructure in the epicentral region in and around Port-au-Prince. The Earthquake Engineering Field Investigation Team (EEFIT), which is based in the United Kingdom, organised a field mission to Haiti with the authors as the team members. The paper presents the geotechnical findings of the team including those relating to soil liquefaction and lateral spreading and discusses the performance of buildings, including historic buildings, and bridges. Unprecedented use was made of damage assessments made from remote images (i. e. images taken from satellites and aircraft) when planning the post-earthquake relief effort in Haiti and a principal objective of the team was to evaluate the accuracy of such assessments. Accordingly, 142 buildings in Port-au-Prince were inspected in the field by the EEFIT team; damage assessments had previously been made using remote images for all these buildings. On the basis of this survey, the tendency of remote assessments to underestimate damage was confirmed; it was found that the underestimate applied to assessments based on oblique images using the relatively new technique of Pictometry, as well as those based on vertical images, although to a lesser degree. The paper also discusses the distribution of damage in Port-au-Prince, which was found to be strongly clustered in ways that appear not to have been completely explained. © 2012 Springer Science+Business Media B.V.

3D modeling of high temperature superconducting staggered array undulator

A 3-D model of a superconducting staggered array undulator has been built, which could serve as a powerful tool to solve electromagnetic problems and to realize field optimization of such design. Given the limitation of 2-D simulation for irregular shapes and complex geometries, 3-D models are more desirable for a comprehensive investigation. An optimization method for the undulator peak field is proposed; up to 32% enhancement can be achieved by introducing major segment bulks. Some improvements of the undulator design are obtained by careful analyzing of the simulation results. © 2002-2011 IEEE.