Lycopene and ß-carotene protect in vivo iron-induced oxidative stress damage in rat prostate

It has been suggested that iron overload may be carcinogenic. In the present study, we evaluated the effect of plasma and prostate carotenoid concentration on oxidative DNA damage in 12-week-old Wistar rats treated with intraperitoneal (ip) ferric nitrilotriacetate (Fe-NTA) (10 mg Fe/kg). Plasma ß-carotene and lycopene concentrations were measured as a function of time after ip injection of carotenoids (10 mg kg-1 day-1 ß-carotene or lycopene) in rats. The highest total plasma concentration was reached 3 and 6 h after ip injection of lycopene or ß-carotene, respectively. After 5 days of carotenoid treatment, lycopene and ß-carotene were present in the 0.10-0.51 nmol/g wet tissue range in the prostate. Using a sensitive method to detected 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodGuo) by HPLC/EC, the level of 8-oxodGuo in rat prostate DNA was significantly higher (6.3 ± 0.6 residues/10(6) dGuo) 3 h after Fe-NTA injection compared with control rats (1.7 ± 0.3 residues/10(6) dGuo). Rats supplemented with lycopene or ß-carotene for 5 days prior to Fe-NTA treatment showed a reduction of about 70% in 8-oxodGuo levels to almost control levels. Compared with control rats, the prostate of Fe-NTA-treated animals showed a 78% increase in malondialdehyde accumulation. Lycopene or ß-carotene pre-treatment almost completely prevented lipid damage. Epidemiological studies have suggested a lower risk of prostate cancer in men reporting a higher consumption of tomato products. However, before associating this effect with tomato sauce constituents, more information is required. The results described here may contribute to the understanding of the protective effects of carotenoids against iron-induced oxidative stress.

Iron(III) as Lewis acid catalyst in organosilicon and carbonyl chemistry

Iron is one of the most common elements in the earth’s crust and thus its availability and economic viability far exceed that of metals commonly used in catalysis. Also the toxicity of iron is miniscule, compared to the likes of platinum and nickel, making it very desirable as a catalyst. Despite this, prior to the 21st century, the applicability of iron in catalysis was not thoroughly investigated, as it was considered to be inefficient and unselective in desired transformations. In this doctoral thesis, the application of iron catalysis in combination with organosilicon reagents for transformations of carbonyl compounds has been investigated together with insights into iron catalyzed chlorination of silanes and silanols. In the first part of the thesis, the synthetic application of iron(III)-catalyzed chlorination of silanes (Si-H) and the monochlorination of silanes (SiH2) using acetyl chloride as the chlorine source is described. The reactions proceed under ambient conditions, although some compounds need to be protected from excess moisture. In addition, the mechanism and kinetics of the chlorination reaction are briefly adressed. In the second part of this thesis a versatile methodology for transformation of carbonyl compounds into three different compound classes by changing the conditions and amounts of reagents is discussed. One pot reductive benzylation, reductive halogenation and reductive etherification of ketones and aldehydes using silanes as the reducing agent, halide source or cocatalyst, were investigated. Also the reaction kinetics and mechanism of the reductive halogenation of acetophenone are briefly discussed.

Magnetization studies of polystyrene/multiwall carbon nanotube composite films

Lappeenranta University of Technology School of Technology Technical Physics Evgenii Zhukov MAGNETIZATION STUDIES OF POLYSTYRENE/MULTIWALL CARBON NANOTUBE COMPOSITE FILMS Master’s thesis 2015 55 pages, 41 pictures, 9 Tables. Examiners: Professor Erkki Lähderanta D.Sc. Ivan Zakharchuk Keywords: polystyrene, multi-walled carbon nanotubes, MWCNT, composite, magnetization, SQUID. In this thesis magnetic properties of polystyrene/multiwall carbon nanotube (MWCNT) composites are investigated with Quantum Design SQUID magnetometer (MPMS XL). The surface of the composite films is studied via BRUKER Multimode 8 Atomic Force Microscope, as well. The polystyrene/MWCNT composites have been prepared by the group of professor Okotrub (Physics Chemistry of Nanomaterials laboratory, Nikolaev Institute of Inorganic Chemistry, Russia). The composite films have been prepared by solution processing and stretching method. The approximate length and inner diameter of the MWCNTs used in fabrication are 260 μm and 10 nm, respectively. The content of MWCNTs is 1 and 2.5 contents percent (wt%) for studied samples. The stretching of the samples is 30% for samples with 1 and 2.5 wt% content, and one sample with 1 wt% loading of MWCNTs is 100% stretched. MWCNTs aligned perpendicular to a silicon substrate are used as a reference sample. The magnetization field dependencies of the samples exhibit hysteresis behavior. The values of saturation magnetization of composite films are much less compared to that of the reference sample. The saturation magnetization coercitivity field value drops with decrease of MWCNT content. At high magnetic fields strong presence of diamagnetism is observed. Measurements in magnetic field parallel and perpendicular to the composite plate display anisotropy with respect to the direction of stretching. Temperature dependences of magnetization for all samples display difference between zero-field cooled and field-cooled curves of magnetization. This divergence confirms the presence of magnetic interactions in the material. The atomic force microscopy study of the composites’ surfaces revealed that they are relatively smooth and the nanotubes are aligned with the axis of stretching to some extent. 

Uniformity of dry bacteriorhodopsin films

Bacteriorhodopsin (BR) is a light-sensitive protein, which is a promising material for various technical applications, such as photosensors. The quality of dry thick BR photosensors depends on few performance characteristics. Uniformity of parameters, which have the impact on such characteristics, should be maintained during the preparation or otherwise compensated afterwards. In this thesis, uniformity examination techniques were studied. Experimental setups, which operate, based on studied techniques, were designed. Experiments, which were conducted on constructed setups, revealed a list of dependencies between BR properties and allowed to evaluate properties of sensors.

Increased expression and purification of soluble iron-regulatory protein 1 from Escherichia coli co-expressing chaperonins GroES and GroEL

Iron is an essential metal for all living organisms. However, iron homeostasis needs to be tightly controlled since iron can mediate the production of reactive oxygen species, which can damage cell components and compromise the integrity and/or cause DNA mutations, ultimately leading to cancer. In eukaryotes, iron-regulatory protein 1 (IRP1) plays a central role in the control of intracellular iron homeostasis. This occurs by interaction of IRP1 with iron-responsive element regions at 5' of ferritin mRNA and 3' of transferrin mRNA which, respectively, represses translation and increases mRNA stability. We have expressed IRP1 using the plasmid pT7-His-hIRP1, which codifies for human IRP1 attached to an NH2-terminal 6-His tag. IRP1 was expressed in Escherichia coli using the strategy of co-expressing chaperonins GroES and GroEL, in order to circumvent inclusion body formation and increase the yield of soluble protein. The protein co-expressed with these chaperonins was obtained mostly in the soluble form, which greatly increased the efficiency of protein purification. Metal affinity and FPLC ion exchange chromatography were used in order to obtain highly purified IRP1. Purified protein was biologically active, as assessed by electrophoretic mobility shift assay, and could be converted to the cytoplasmic aconitase form. These results corroborate previous studies, which suggest the use of folding catalysts as a powerful strategy to increase protein solubility when expressing heterologous proteins in E. coli.

Hydrogen peroxide induces a specific DNA base change profile in the presence of the iron chelator 2,2’ dipyridyl in Escherichia coli

Pretreatment of Escherichia coli cultures with the iron chelator 2,2’-dipyridyl (1 mM) protects against the lethal effects of low concentrations of hydrogen peroxide (<15 mM). However, at H2O2 concentrations equal to or greater than 15 mM, dipyridyl pretreatment increases lethality and mutagenesis, which is attributed to the formation of different types of DNA lesions. We show here that pretreatment with dipyridyl (1 mM) prior to challenge with high H2O2 concentrations (≥15 mM) induced mainly G:C→A:T transitions (more than 100X with 15 mM and more than 250X with 20 mM over the spontaneous mutagenesis rate) in E. coli. In contrast, high H2O2 concentrations in the absence of dipyridyl preferentially induced A:T→T:A transversions (more than 1800X and more than 300X over spontaneous mutagenesis for 15 and 20 mM, respectively). We also show that in the fpg nth double mutant, the rpoB gene mutation (RifS-RifR) induced by 20 mM H2O2 alone (20X higher) was increased in 20 mM H2O2 and dipyridyl-treated cultures (110X higher), suggesting additional and/or different lesions in cells treated with H2O2 under iron deprivation. It is suggested that, upon iron deprivation, cytosine may be the main damaged base and the origin of the pre-mutagenic lesions induced by H2O2.

HFE gene mutations and iron status of Brazilian blood donors

Mutations of the HFE and TFR2 genes have been associated with iron overload. HFE and TFR2 mutations were assessed in blood donors, and the relationship with iron status was evaluated. Subjects (N = 542) were recruited at the Hemocentro da Santa Casa de São Paulo, São Paulo, Brazil. Iron status was not influenced by HFE mutations in women and was independent of blood donation frequency. In contrast, men carrying the HFE 282CY genotype had lower total iron-binding capacity (TIBC) than HFE 282CC genotype carriers. Men who donated blood for the first time and were carriers of the HFE 282CY genotype had higher transferrin saturation values and lower TIBC concentrations than those with the homozygous wild genotype for the HFE C282Y mutation. Moreover, in this group of blood donors, carriers of HFE 63DD plus 63HD genotypes had higher serum ferritin values than those with the homozygous wild genotype for HFE H63D mutation. Multiple linear regression analysis showed that HFE 282CY leads to a 17.21% increase (P = 0.018) and a 83.65% decrease (P = 0.007) in transferrin saturation and TIBC, respectively. In addition, serum ferritin is influenced by age (3.91%, P = 0.001) and the HFE 63HD plus DD genotype (55.84%, P = 0.021). In conclusion, the HFE 282Y and 65C alleles were rare, while the HFE 63D allele was frequent in Brazilian blood donors. The HFE C282Y and H63D mutations were associated with alterations in iron status in blood donors in a gender-dependent manner.

Calculation of viscoelastic properties of edible films: application of three models

The viscoelastic properties of edible films can provide information at the structural level of the biopolymers used. The objective of this work was to test three simple models of linear viscoelastic theory (Maxwell, Generalized Maxwell with two units in parallel, and Burgers) using the results of stress relaxation tests in edible films of myofibrillar proteins of Nile Tilapia. The films were elaborated according to a casting technique and pre-conditioned at 58% relative humidity and 22ºC for 4 days. The testing sample (15mm x 118mm) was submitted to tests of stress relaxation in an equipment of physical measurements, TA.XT2i. The deformation, imposed to the sample, was 1%, guaranteeing the permanency in the domain of the linear viscoelasticity. The models were fitted to experimental data (stress x time) by nonlinear regression. The Generalized Maxwell model with two units in parallel and the Burgers model represented the relaxation curves of stress satisfactorily. The viscoelastic properties varied in a way that they were less dependent on the thickness of the films.

Development and characterization of edible films based on gluten from semi-hard and soft Brazilian wheat flours (development of films based on gluten from wheat flours)

Edible films based on gluten from four types of Brazilian wheat gluten (2 "semi-hard" and 2 "soft") were prepared and mechanical and barrier properties were compared with those of wheat gluten films with vital gluten. Water vapor, oxygen permeability, tensile strength and percent elongation at break, solubility in water and surface morphology were measured. The films from "semi-hard" wheat flours showed similar water vapor permeability and solubility in water to films from vital gluten and better tensile strength than the films from "soft" and vital gluten. The films from vital gluten had higher elongation at break and oxygen permeability and also lower solubility in water than the films from the Brazilian wheat "soft" flours. In spite of the vital gluten showed greater mechanical resistance, desirable for the bakery products, for the purpose of developing gluten films Brazilian "semi-hard" wheat flours can be used instead of vital gluten, since they showed similar barrier and mechanical properties.

Development and characterization of thin printed films for gas sensing applications

The monitoring and control of hydrogen sulfide (H2S) level is of great interest for a wide range of application areas including food quality control, defense and antiterrorist applications and air quality monitoring e.g. in mines. H2S is a very poisonous and flammable gas. Exposure to low concentrations of H2S can result in eye irritation, a sore throat and cough, shortness of breath, and fluid retention in the lungs. These symptoms usually disappear in a few weeks. Long-term, low-level exposure may result in fatigue, loss of appetite, headache, irritability, poor memory, and dizziness. Higher concentrations of 700 - 800 ppm tend to be fatal. H2S has a characteristic smell of rotten egg. However, because of temporary paralysis of olfactory nerves, the smelling capability at concentrations higher than 100 ppm is severely compromised. In addition, volatile H2S is one of the main products during the spoilage of poultry meat in anaerobic conditions. Currently, no commercial H2S sensor is available which can operate under anaerobic conditions and can be easily integrated in the food packaging. This thesis presents a step-wise progress in the development of printed H2S gas sensors. Efforts were made in the formulation, characterization and optimization of functional printable inks and coating pastes based on composites of a polymer and a metal salt as well as a composite of a metal salt and an organic acid. Different processing techniques including inkjet printing, flexographic printing, screen printing and spray coating were utilized in the fabrication of H2S sensors. The dispersions were characterized by measuring turbidity, surface tension, viscosity and particle size. The sensing films were characterized using X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy and an electrical multimeter. Thin and thick printed or coated films were developed for gas sensing applications with the aim of monitoring the H2S concentrations in real life applications. Initially, a H2S gas sensor based on a composite of polyaniline and metal salt was developed. Both aqueous and solvent-based dispersions were developed and characterized. These dispersions were then utilized in the fabrication of roll-to-roll printed H2S gas sensors. However, the humidity background, long term instability and comparatively lower detection limit made these sensors less favourable for real practical applications. To overcome these problems, copper acetate based sensors were developed for H2S gas sensing. Stable inks with excellent printability were developed by tuning the surface tension, viscosity and particle size. This enabled the formation of inkjet-printed high quality copper acetate films with excellent sensitivity towards H2S. Furthermore, these sensors showed negligible humidity effects and improved selectivity, response time, lower limit of detection and coefficient of variation. The lower limit of detection of copper acetate based sensors was further improved to sub-ppm level by incorporation of catalytic gold nano-particles and subsequent plasma treatment of the sensing film. These sensors were further integrated in an inexpensive wirelessly readable RLC-circuit (where R is resistor, L is inductor and C is capacitor). The performance of these sensors towards biogenic H2S produced during the spoilage of poultry meat in the modified atmosphere package was also demonstrated in this thesis. This serves as a proof of concept that these sensors can be utilized in real life applications.

The effect of irradiation and thermal process on beef heme iron concentration and color properties

The aim of this study was to evaluate the influence of irradiation and thermal process on the heme iron (heme-Fe) concentration and color properties of Brazilian cattle beef. Beef samples (patties and steaks) were irradiated at 0-10 kGy and cooked in a combination oven at 250 ºC for 9 minutes with 70% humidity. Total iron and heme iron (heme-Fe) concentrations were determined. The data were compared by multiple comparisons and fixed- effects ANOVA. Irradiation at doses higher than 5 kGy significantly altered the heme-Fe concentration. However, the sample preparation conditions interfered more in the heme-Fe content than did the irradiation. Depending on the animal species, meat heme iron levels between 35 and 52% of the total iron are used for dietetic calculations. In this study the percentage of heme-iron was, on average, 70% of the total iron showing that humidity is an important factor for its preservation. The samples were analyzed instrumentally for CIE L*, a*, and b* values.

Almond and peanut flours suppelmented with iron as potential ingredients to develop gluten-free cookies

Brazil is the second biggest worldwide producer of cookies and there are many varieties in the market; however, only a few are gluten-free. The objectives of this work were to formulate two gluten-free cookies added with iron, peanut or almond, and analyze their physicochemical, chromatic and sensory properties. Moisture, instrumental color (L*, a*, b* and C*), ash, proteins, lipids, iron, carbohydrates (estimated by difference), and water activity were determined. The acceptance of the products was assessed by 115 untrained taste panelists using a five-point hedonic scale. The data collected from the physicochemical analyses were submitted to Levene's, ANOVA, and Tukey's tests, which showed statistical difference (p < 0.05) in all the attributes for centesimal composition, water activity, and color of the cookies. Peanut and almond cookies could be considered sources of iron once they presented at least 15% of the daily recommended value of intake. They also garnered acceptance indexes of 80 and 85%, respectively, concluding that both formulations developed in this study were source of iron and contained high concentration of lipids and proteins with great sensory acceptance, suggesting their potential consumption by gluten-intolerants.

Development of gluten-free cookie from medicinal plants (Guaraná - Paullinea cupana and Catuaba - Anemopaegma mirandum) aiming at copper, iron, and zinc supplementation

Two flavors of cookies were developed (savory and peppery) containing a mixture of plants such as "guaraná" (Paullinia cupana) and "catuaba" (Anemopaegma mirandum). A test of acceptance and buying intention was applied to 48 consumers through a structured hedonic scale of 9 points. Afterwards, the centesimal compositions of these cookies were obtained as well as their total contents of copper, iron, and zinc through the method of atomic absorption spectrometry with flame. Sensorial tests indicated that the cookies presented good acceptance with potential to sensorial growth. The amount of fibers in the samples, 3 g/100 g, surpassed expectations since the product was not invented with the intention of being a source of this nutrient. The total amount of copper (0.41 mg.100 g-1), iron (4.50 mg.100 g-1), and zinc (1.32 mg.100 g-1) was considered good. The cookies produced can be considered good sources of fibers, copper, iron, and zinc. Furthermore, they are beneficial to people affected by celiac disease because they lack gluten. They also present functional properties. In addition, the medicinal plants used are considered energetic.

Sensory evaluation of rice fortified with iron

The objective of this study was to examine sensory differences between conventional rice and iron-fortified Ultra Rice rice (UR) and determine consumer acceptance. Differences between both types of rice were analyzed using the Duo-Trio Test on 37 non-trained judges. The Acceptance Test evaluated general rice appearance, color, aroma and taste by 43 non-trained judges, using a 7-point hedonic scale with extremes ranging from "really disliked" and "really liked." There were no significant differences between the analyzed samples of conventional rice and UR rice using Duo-Trio Test. Mean values from the Acceptance Test for the evaluated attributes (general appearance, color, aroma e taste) were 5.6 and 5.9, corresponding to "liked" and "really liked" according to the hedonic scale, respectively. The iron did not alter the sensory characteristics of the final product, and the iron-fortified rice was well accepted.

Iron availability in the presence of β-carotene in different mixtures

Iron availability in the diet is very important because iron deficiency affects a large population in the world. The matrix where iron is present has an influence in its availability. The presence of β-carotene is a factor that alters the availability of iron. This research aims to estimate the iron availability in the presence of β-carotene in food mixtures: M1 = egg and pumpkin; M2 = spinach and pumpkin; M3 = spinach and cabbage; M4 = egg and cabbage; M5 = spinach and carrot; M6 = egg and carrot; M7 = bean and carrot; M8 = bean and pumpkin and M9 = bean and cabbage. After cooking, the following figures were determined: proximate composition, oxalic acid, phytic acid, tannin, iron, iron availability in vitro and β-carotene. The data were analyzed by Tukey test (5%). There were no significant statistical differences for oxalic acid. Tannin presented greater results in mixtures with spinach (M2 and M5); phytic acid was greater in bean samples (M7, M8 and M9) and with spinach (M2). Mixtures M5 e M7, with carrot, presented more β-carotene than the others. The best result for iron availability appeared in mixture (M6). A positive correlation was verified between protein and iron dialysis, and between lipids and iron dialysis. Dietetic fiber was an inhibitor to iron availability. Mixtures with egg showed greater iron availability