Characterisation of cell adhesion to substrate materials and the resistance to enzymatic and mechanical cell-removal

Cell-implant adhesive strength is important for prostheses. In this paper, an investigation is described into the adhesion of bovine chondrocytes to Ti6Al4V-based substrates with different surface roughnesses and compositions. Cells were cultured for 2 or 5 days, to promote adhesion. The ease of cell removal was characterised, using both biochemical (trypsin) and mechanical (accelerated buoyancy and liquid flow) methods. Computational fluid dynamics (CFD) modelling has been used to estimate the shear forces applied to the cells by the liquid flow. A comparison is presented between the ease of cell detachment indicated using these methods, for the three surfaces investigated. © 2008 Materials Research Society.

Simultaneous measurement of temperature, density and velocity in gas-flows by modulated photoluminescence

A novel possibility to determine the temperature, density and velocity simultaneously in gas flows by measuring the average value, amplitude of modulation and phase shift of the photoluminescence excited by a temporally or spatially modulated light source is investigated. Time-dependent equations taking the flow, diffusion, excitation and decay into account are solved analytically. Different experimental arrangements are proposed. Measurements of velocity with two components, and temporal and spatial resolutions in the measurements are investigated. Numerical examples are given for N z with biacetyl as the seed gas. Practical considerations for the measurements and the relation between this method and some existing methods of lifetime measurement are discussed.

Pipeline Corrosion Analyzed by Fuzzy Reliability Methods

Fuzzy reliability methods are used to study the corrosion of pipelines. Three methods are used. They consist of using fracture failure modes, failure assessment diagram (FAD) and residual strength for establishing fuzzy reliability. Calculations are made by application of JC, improved GA-JC and Mente-carlo methods. Examples for oilfield injecting water pipeline show the residual strength well agree with field data. Mente-carlo methods appear to yield results that have better agreement with field data.

Analytical Methods of Residual Strength in Injecting Water Pipeline

In this paper, common criterions about residual strength evaluation at home and abroad are generalized and seven methods are acquired, namely ASME-B31G, DM, Wes-2805-97, CVDA-84, Burdekin, Irwin and J integral methods. BP neural network are Combined with Genetic Algorithm (GA) named by modified BP-GA methods to successfully predict residual strength and critical pressure of injecting water, corrosion pipelines. Examples are shown that calculation results of every kind of method have great difference and calculating values of Wes-2805-97 criterion, ASME-B31G criterion, CVDA-84 criterion and Irwin fracture mechanics model are conservative and higher than, those of J integral methods while calculating values of Burdiken model and DM fracture mechanics model are dangerous and less than those of J integral methods and calculating values of modified BP-GA methods are close and moderate to those of J integral methods. Therefore modified BP-GA methods and J integral methods are considered better methods to calculate residual strength and critical pressure of injecting water corrosion pipelines

Design,optimization and in vivo evaluation of non-viral vectors for gene therapy. Applications in ocular disorders

227 págs.

An examination of fluctuations in the “concentration index” of purse seiners and baitboats in the fishery for tropical tunas in the Eastern Pacific, 1951-1961

ENGLISH: In the eastern Pacific Ocean nearly all of the commercial catches of yellowfin tuna (Thunnus albacares) and skipjack (Katsuwonus pelamis) are taken by two types of vessels, baitboats, which use pole and line in conjunction with live-bait, and purse-seiners. From its inception until very recently (1959), this fishery was dominated by baitboats. This method of fishing has been described by Godsil (1938) and Shimada and Schaefer (1956). From 1951 through 1958 baitboats caught between 66.4 and 90.8 per cent of the yellowfin and between 87.2 and 95.3 per cent of the skipjack landed by the California-based fleet. These vessels fished for tuna throughout the year and covered virtually all of the area from southern California to northern Chile. The purse-seine fishery for tunas developed out of the round-haul net fisheries for California sardines and other species. Scofield (1951) gives a detailed description of the development of gear and fishing methods. Prior to 1959 many of the seiners engaged in other fisheries during the fall and early winter months and consequently most of the fishing effort for tuna occurred in the period February-August. The vessels were quite small, averaging approximately 120 tons carrying capacity (Broadhead and Marshall, 1960), in comparison to the baitboats, of which the most numerous size-class was 201-300 tons. The seiners were naturally more restricted in range than the baitboats and most of their effort was restricted to the northern grounds. During the period 1959-61 most of the large baitboats were converted for purse-seining and the existing seiner fleet was modernized. These developments increased the range of the seiner fleet and resulted in a wider and more nearly even spatial and temporal distribution of effort. By the early part of 1961, the purse-seine fleet approximated the level of the preconversion baitboat fleet in amount of effort applied and area covered. The changes in the purse-seine fishery and the fishing methods employed in the modernized fleet are described by Orange and Broadhead (1959), Broadhead and Marshall (1960), McNeely (1961) and Broadhead (1962). The change in the relative importance of the two gears is illustrated by the decline in the proportion of the total logged tonnage landed by California-based baitboats, in comparison to the proportion landed by seiners. In 1959 baitboats landed 49.5 per cent of the yellowfin and 87.8 per cent of the skipjack. In 1960 these percentages were 22.9 and 74.7 respectively and in 1961 the decline continued to 12.6 per cent of the yellowfin and 30.0 per cent of the skipjack (Schaefer, 1962). In previous Bulletins of this Commission (Griffiths, 1960; Calkins, 1961) the baitboat catch and effort statistics were used to compute two indices of population density and an index of concentration of fishing effort and the fluctuations of these indices were analyzed in some detail. Due to the change in the relative importance of the two gears it is appropriate to extend this investigation to include the purse-seine data. The objectives of this paper are to compute two indices of population density and an index of concentration of fishing effort and to examine the fluctuations in these indices before and after the changes in the fishery. A further objective is to compare the purse-seine indices with those of the baitboats for the same time periods. SPANISH: En el Océano Pacífico Oriental casi todas las capturas comerciales del atún aleta amarilla (Thunnus albacares) y del barrilete (Katsuwonus pelamis) son efectuadas por dos tipos de barcos, los barcos de carnada que emplean la caña y el anzuelo en conjunto con la carnada viva, y los barcos rederos. Desde su comienzo hasta hace poco tiempo (1959), esta pesquería estaba dominada por los barcos de carnada. El método de pesca usado por estos barcos ha sido descrito por Godsil (1938) y por Shimada y Schaefer (1956). De 1951 a 1958, los barcos de carnada pescaron entre el 66.4 y el 90.8 por ciento del atún aleta amarilla y entre el 87.2 y el 95.3 por ciento del barrilete descargados por la flota que tiene su base en California. Estos barcos pescaron atún durante todo el año y cubrieron virtualmente toda el área de California meridional hasta la parte norte de Chile. La pesquería del atún con redes de cerco se originó en las pesquerías de las sardinas de California y otras especies, con redes que se remolcaban circularmente. Scofield (1951) dá una descripción detallada del desarrollo de los métodos y del equipo de pesca. Antes de 1959 muchos de los rederos se dedicaban a otras pesquerías durante los meses del otoño y a principios del invierno y consecuentemente, la mayor parte del esfuerzo depesca para la producción del atún ocurría en el período febrero-agosto. Las embarcaciones eran bastante pequeñas, con un promedio de aproximadamente 120 toneladas de capacidad para el transporte (Broadhead y Marshall, 1960) en comparación con los barcos de carnada, de los cuales la clase de tamaño más numerosa era de 201 a 300 toneladas. Los rederos estaban naturalmente más restringidos en su radio de acción que los barcos de carnada y la mayor parte de su esfuerzo se limitaba a las localidades del norte. Durante el período 1959-61, la mayoría de los grandes barcos de carnada fueron convertidos al sistema de pesca con redes de cerco, y se modernizó la flota existente de los rederos. Estos cambios aumentaron el alcance de la flota de los barcos rederos dando como resultado una distribución más amplia y casi más uniforme del esfuerzo espaciado y temporal. En la primera parte del año 1961, la flota de rederos se aproximó al nivel de la preconversión de la flota de clipers, en la cantidad de esfuerzo aplicado y al área comprendida. Los cambios en la pesquería con red y los métodos de pesca empleados en la flota modernizada, han sido descritos por Orange y Broadhead (1959), Broadl1ead y Marshall (1960), McNeely (1961) y Broadhead (1962). El cambio en la importancia relativa de los dos sistemas de pesca está ilustrado por la declinación en la proporción del tonelaje total registrado, como descargado por los barcos de carnada que tienen su base en California, comparado con la proporción desembarcada por los barcos rederos. En 1959 los clipers descargaron el 49.5 por ciento del atún aleta amarilla y el 87.8 por ciento del barrilete. En 1960 estos porcentajes fueron del 22.9 y 74.7 respectivamente, y en 1961 continuó la reducción hasta el 12.6 por ciento del atún aleta amarilla y el 30.0 por ciento del barrilete (Schaefer, 1962). En Boletines anteriores de la Comisión (Griffiths, 1960; Calkins, 1961) las estadísticas de la pesca y el esfuerzo de los clipers se utilizaron para computar dos índices de la densidad de población y un índice de la concentración del esfuerzo de pesca, y se analizaron algo detalladamente las fluctuaciones de estos índices. Debido al cambio en la importancia relativa de los dos sistemas de pesca, es conveniente extender esta investigación para incluir los datos correspondientes a los barcos rederos. Los objetivos del presente estudio son de computar dos índices de la densidad de población y un índice de la concentración del esfuerzo de pesca, y examinar las fluctuaciones en estos índices, antes y después de los cambios en la pesquería. Otro objetivo es de comparar los índices de los barcos rederos, con aquellos de los clipers en los mismos períodos de tiempo.

Chaetognatha of the Caribbean Sea and adjacent areas

This illustrated manual is a guide to the distribution and identification of the 6 genera and 28 species of benthic and planktonic Chaetognatha known to occur in the Caribbean Sea, the Gulf of Mexlco, the Florida Straits, and the southwestern North Atlantic Ocean. As background, previous studies of chaetognaths in these areas are reviewed, gross morphology of the different forms is described, and instructions on methods of preserving and handling specimens preparatory to identification are provided. The key to genera and species is preceeded by a discussion of chaetognath taxonomy. A description of each species, consisting of an abbreviated synonymy, a summary of taxonomically important morphological features, and horizontal and vertical distribution follows the key. The occurrence of species in relation to water masses in the Caribbean and adjacent areas is noted. (PDF file contains 39 pages.)

A comparative assessment of the methods of control of water hyacinth infestation with regards to fish production

Water hyacinth (Eichhornia crassipes) has been subject of three control methods since its arrival into the Nigerian freshwater lagoon system in 1984 - mechanical, chemical and biological. An assessment of these three methods seems to suggest that mechanical and chemical control methods, both of which being costly, must be applied either solely or integrated to combat the present level of considerable infestation in Nigeria. The biological control methods are advisable for slow, sustained control and can only cope with low levels of infestation. It is thus concluded that the preliminary control method should be mechanical or chemical to effectively abate the nuisance plant, followed by biological control once infestation levels have been sufficiently reduced

Trapped ion magnetic resonance: concepts and designs

A novel spectroscopy of trapped ions is proposed which will bring single-ion detection sensitivity to the observation of magnetic resonance spectra. The approaches developed here are aimed at resolving one of the fundamental problems of molecular spectroscopy, the apparent incompatibility in existing techniques between high information content (and therefore good species discrimination) and high sensitivity. Methods for studying both electron spin resonance (ESR) and nuclear magnetic resonance (NMR) are designed. They assume established methods for trapping ions in high magnetic field and observing the trapping frequencies with high resolution (<1 Hz) and sensitivity (single ion) by electrical means. The introduction of a magnetic bottle field gradient couples the spin and spatial motions together and leads to a small spin-dependent force on the ion, which has been exploited by Dehmelt to observe directly the perturbation of the ground-state electron's axial frequency by its spin magnetic moment.

A series of fundamental innovations is described m order to extend magnetic resonance to the higher masses of molecular ions (100 amu = 2x 10^5 electron masses) and smaller magnetic moments (nuclear moments = 10^(-3) of the electron moment). First, it is demonstrated how time-domain trapping frequency observations before and after magnetic resonance can be used to make cooling of the particle to its ground state unnecessary. Second, adiabatic cycling of the magnetic bottle off between detection periods is shown to be practical and to allow high-resolution magnetic resonance to be encoded pointwise as the presence or absence of trapping frequency shifts. Third, methods of inducing spindependent work on the ion orbits with magnetic field gradients and Larmor frequency irradiation are proposed which greatly amplify the attainable shifts in trapping frequency.

The dissertation explores the basic concepts behind ion trapping, adopting a variety of classical, semiclassical, numerical, and quantum mechanical approaches to derive spin-dependent effects, design experimental sequences, and corroborate results from one approach with those from another. The first proposal presented builds on Dehmelt's experiment by combining a "before and after" detection sequence with novel signal processing to reveal ESR spectra. A more powerful technique for ESR is then designed which uses axially synchronized spin transitions to perform spin-dependent work in the presence of a magnetic bottle, which also converts axial amplitude changes into cyclotron frequency shifts. A third use of the magnetic bottle is to selectively trap ions with small initial kinetic energy. A dechirping algorithm corrects for undesired frequency shifts associated with damping by the measurement process.

The most general approach presented is spin-locked internally resonant ion cyclotron excitation, a true continuous Stern-Gerlach effect. A magnetic field gradient modulated at both the Larmor and cyclotron frequencies is devised which leads to cyclotron acceleration proportional to the transverse magnetic moment of a coherent state of the particle and radiation field. A preferred method of using this to observe NMR as an axial frequency shift is described in detail. In the course of this derivation, a new quantum mechanical description of ion cyclotron resonance is presented which is easily combined with spin degrees of freedom to provide a full description of the proposals.

Practical, technical, and experimental issues surrounding the feasibility of the proposals are addressed throughout the dissertation. Numerical ion trajectory simulations and analytical models are used to predict the effectiveness of the new designs as well as their sensitivity and resolution. These checks on the methods proposed provide convincing evidence of their promise in extending the wealth of magnetic resonance information to the study of collisionless ions via single-ion spectroscopy.

The deuteron-deuteron reaction and the stopping cross section of D_2O ice below 600 kev

The energy loss of protons and deuterons in D_2O ice has been measured over the energy range, E_p 18 - 541 kev. The double focusing magnetic spectrometer was used to measure the energy of the particles after they had traversed a known thickness of the ice target. One method of measurement is used to determine relative values of the stopping cross section as a function of energy; another method measures absolute values. The results are in very good agreement with the values calculated from Bethe’s semi-empirical formula. Possible sources of error are considered and the accuracy of the measurements is estimated to be ± 4%.

The D(dp)H^3 cross section has been measured by two methods. For E_D = 200 - 500 kev the spectrometer was used to obtain the momentum spectrum of the protons and tritons. From the yield and stopping cross section the reaction cross section at 90° has been obtained.

For E_D = 35 – 550 kev the proton yield from a thick target was differentiated to obtain the cross section. Both thin and thick target methods were used to measure the yield at each of ten angles. The angular distribution is expressed in terms of a Legendre polynomial expansion. The various sources of experimental error are considered in detail, and the probable error of the cross section measurements is estimated to be ± 5%.

Earthquake response of steel braces and braced steel frames

This thesis consists of three parts. Chapter 2 deals with the dynamic buckling behavior of steel braces under cyclic axial end displacement. Braces under such a loading condition belong to a class of "acceleration magnifying" structural components, in which a small motion at the loading points can cause large internal acceleration and inertia. This member-level inertia is frequently ignored in current studies of braces and braced structures. This chapter shows that, under certain conditions, the inclusion of the member-level inertia can lead to brace behavior fundamentally different from that predicted by the quasi-static method. This result is to have significance in the correct use of the quasi-static, pseudo-dynamic and static condensation methods in the simulation of braces or braced structures under dynamic loading. The strain magnitude and distribution in the braces are also studied in this chapter.

Chapter 3 examines the effect of column uplift on the earthquake response of braced steel frames and explores the feasibility of flexible column-base anchoring. It is found that fully anchored braced-bay columns can induce extremely large internal forces in the braced-bay members and their connections, thus increasing the risk of failures observed in recent earthquakes. Flexible braced-bay column anchoring can significantly reduce the braced bay member force, but at the same time also introduces large story drift and column uplift. The pounding of an uplifting column with its support can result in very high compressive axial force.

Chapter 4 conducts a comparative study on the effectiveness of a proposed non-buckling bracing system and several conventional bracing systems. The non-buckling bracing system eliminates buckling and thus can be composed of small individual braces distributed widely in a structure to reduce bracing force concentration and increase redundancy. The elimination of buckling results in a significantly more effective bracing system compared with the conventional bracing systems. Among the conventional bracing systems, bracing configurations and end conditions for the bracing members affect the effectiveness.

The studies in Chapter 3 and Chapter 4 also indicate that code-designed conventionally braced steel frames can experience unacceptably severe response under the strong ground motions recorded during the recent Northridge and Kobe earthquakes.

Radar methods for the exploration of glaciers

The problem of finding the depths of glaciers and the current methods are discussed briefly. Radar methods are suggested as a possible improvement for, or adjunct to, seismic and gravity survey methods. The feasibility of propagating electromagnetic waves in ice and the maximum range to be expected are then investigated theoretically with the aid of experimental data on the dielectric properties of ice. It is found that the maximum expected range is great enough to measure the depth of many glaciers at the lower radar frequencies if there is not too much liquid water present. Greater ranges can be attained by going to lower frequencies.

The results are given of two expeditions in two different years to the Seward Glacier in the Yukon Territory. Experiments were conducted on a small valley glacier whose depth was determined by seismic sounding. Many echoes were received but their identification was uncertain. Using the best echoes, a profile was obtained each year, but they were not in exact agreement with each other. It could not be definitely established that echoes had been received from bedrock. Agreement with seismic methods for a considerable number of glaciers would have to be obtained before radar methods could be relied upon. The presence of liquid water in the ice is believed to be one of the greatest obstacles. Besides increasing the attenuation and possibly reflecting energy, it makes it impossible to predict the velocity of propagation. The equipment used was far from adequate for such purposes, so many of the difficulties could be attributed to this. Partly because of this, and the fact that there are glaciers with very little liquid water present, radar methods are believed to be worthy of further research for the exploration of glaciers.

Nanofabrication for On-Chip Optical Levitation, Atom-Trapping, and Superconducting Quantum Circuits

Researchers have spent decades refining and improving their methods for fabricating smaller, finer-tuned, higher-quality nanoscale optical elements with the goal of making more sensitive and accurate measurements of the world around them using optics. Quantum optics has been a well-established tool of choice in making these increasingly sensitive measurements which have repeatedly pushed the limits on the accuracy of measurement set forth by quantum mechanics. A recent development in quantum optics has been a creative integration of robust, high-quality, and well-established macroscopic experimental systems with highly-engineerable on-chip nanoscale oscillators fabricated in cleanrooms. However, merging large systems with nanoscale oscillators often require them to have extremely high aspect-ratios, which make them extremely delicate and difficult to fabricate with an "experimentally reasonable" repeatability, yield and high quality. In this work we give an overview of our research, which focused on microscopic oscillators which are coupled with macroscopic optical cavities towards the goal of cooling them to their motional ground state in room temperature environments. The quality factor of a mechanical resonator is an important figure of merit for various sensing applications and observing quantum behavior. We demonstrated a technique for pushing the quality factor of a micromechanical resonator beyond conventional material and fabrication limits by using an optical field to stiffen and trap a particular motional mode of a nanoscale oscillator. Optical forces increase the oscillation frequency by storing most of the mechanical energy in a nearly loss-less optical potential, thereby strongly diluting the effects of material dissipation. By placing a 130 nm thick SiO₂ pendulum in an optical standing wave, we achieve an increase in the pendulum center-of-mass frequency from 6.2 to 145 kHz. The corresponding quality factor increases 50-fold from its intrinsic value to a final value of Q_m = 5.8(1.1) x 10⁵, representing more than an order of magnitude improvement over the conventional limits of SiO₂ for a pendulum geometry. Our technique may enable new opportunities for mechanical sensing and facilitate observations of quantum behavior in this class of mechanical systems. We then give a detailed overview of the techniques used to produce high-aspect-ratio nanostructures with applications in a wide range of quantum optics experiments. The ability to fabricate such nanodevices with high precision opens the door to a vast array of experiments which integrate macroscopic optical setups with lithographically engineered nanodevices. Coupled with atom-trapping experiments in the Kimble Lab, we use these techniques to realize a new waveguide chip designed to address ultra-cold atoms along lithographically patterned nanobeams which have large atom-photon coupling and near 4π Steradian optical access for cooling and trapping atoms. We describe a fully integrated and scalable design where cold atoms are spatially overlapped with the nanostring cavities in order to observe a resonant optical depth of d₀ ≈ 0.15. The nanodevice illuminates new possibilities for integrating atoms into photonic circuits and engineering quantum states of atoms and light on a microscopic scale. We then describe our work with superconducting microwave resonators coupled to a phononic cavity towards the goal of building an integrated device for quantum-limited microwave-to-optical wavelength conversion. We give an overview of our characterizations of several types of substrates for fabricating a low-loss high-frequency electromechanical system. We describe our electromechanical system fabricated on a Si₃N₄ membrane which consists of a 12 GHz superconducting LC resonator coupled capacitively to the high frequency localized modes of a phononic nanobeam. Using our suspended membrane geometry we isolate our system from substrates with significant loss tangents, drastically reducing the parasitic capacitance of our superconducting circuit to ≈ 2.5$ fF. This opens up a number of possibilities in making a new class of low-loss high-frequency electromechanics with relatively large electromechanical coupling. We present our substrate studies, fabrication methods, and device characterization.

Reconstructing Past Depositional and Diagenetic Processes through Quantitative Stratigraphic Analysis of the Martian Sedimentary Rock Record

High-resolution orbital and in situ observations acquired of the Martian surface during the past two decades provide the opportunity to study the rock record of Mars at an unprecedented level of detail. This dissertation consists of four studies whose common goal is to establish new standards for the quantitative analysis of visible and near-infrared data from the surface of Mars. Through the compilation of global image inventories, application of stratigraphic and sedimentologic statistical methods, and use of laboratory analogs, this dissertation provides insight into the history of past depositional and diagenetic processes on Mars. The first study presents a global inventory of stratified deposits observed in images from the High Resolution Image Science Experiment (HiRISE) camera on-board the Mars Reconnaissance Orbiter. This work uses the widespread coverage of high-resolution orbital images to make global-scale observations about the processes controlling sediment transport and deposition on Mars. The next chapter presents a study of bed thickness distributions in Martian sedimentary deposits, showing how statistical methods can be used to establish quantitative criteria for evaluating the depositional history of stratified deposits observed in orbital images. The third study tests the ability of spectral mixing models to obtain quantitative mineral abundances from near-infrared reflectance spectra of clay and sulfate mixtures in the laboratory for application to the analysis of orbital spectra of sedimentary deposits on Mars. The final study employs a statistical analysis of the size, shape, and distribution of nodules observed by the Mars Science Laboratory Curiosity rover team in the Sheepbed mudstone at Yellowknife Bay in Gale crater. This analysis is used to evaluate hypotheses for nodule formation and to gain insight into the diagenetic history of an ancient habitable environment on Mars.