Immune responses of the scallop Chlamys farreri after air exposure to different temperatures

The present study examined the influence of air exposure at different temperatures: a common perturbation associated with aquaculture handling practices, on immune responses in zhikong scallop Chlamys farreri. Scallops were exposed to air for 2 h, 6 h, 12 h and 24 h at 5 degrees C, 17 degrees C and 25 degrees C respectively. Thereafter, a recovery period of 24 h at 17 degrees C was applied. Haemocyte mortality, phagocytosis and reactive oxygen species (ROS) production of haemocytes, acid phosphatase (ACP) and superoxide dismutase (SOD) activity in haemocyte lysates were chosen as immumomarkers of anoxic stress. The results showed that an increase of haemocyte mortality and a decrease of phagocytosis and ACP activity were observed after 2 h of air exposure for all temperatures tested. Moreover, a significant increase of ROS production occurred following 2 h of air exposure at 25 degrees C and 24 h of air exposure at 17 degrees C. Significant differences were also observed in haemocyte mortality, percentage of phagocytic cells and ACP and SOD activity depending on the temperature of air exposure. Finally, after 24 h of recovery at 17 degrees C, percentage of phagocytic haemocytes and ACP activity did not return to initial values. ROS production was significantly higher than before the recovery period and initial values for scallops subjected to air exposure at 5 degrees C. In our study, scallops showed a relative low anoxia tolerance under a high temperature. All the scallops air exposed to 25 degrees C died after the 6 h sampling. In conclusion, air exposure associated to aquaculture practices was demonstrated to strongly affect functional immune activities of scallop haemocytes, and high temperature air exposure caused reduced survival of scallops. (c) 2007 Elsevier B.V. All rights reserved.

Is inorganic nutrient enrichment a driving force for the formation of red tides? A case study of the dinoflagellate Scrippsiella trochoidea in an embayment

Red tides (high biomass phytoplankton blooms) have frequently occurred in Hong Kong waters, but most red tides occurred in waters which are not very eutrophic. For example, Port Shelter, a semi-enclosed bay in the northeast of Hong Kong, is one of hot spots for red tides. Concentrations of ambient inorganic nutrients (e.g. N, P), are not high enough to form the high biomass of chlorophyll a (chl a) in a red tide when chl a is converted to its particulate organic nutrient (N) (which should equal the inorganic nutrient, N). When a red tide of the dinoflagellate Scrippsiella trochoidea occurred in the bay, we found that the red tide patch along the shore had a high cell density of 15,000 cells ml(-1), and high chl a (56 mu g l(-1)), and pH reached 8.6 at the surface (8.2 at the bottom), indicating active photosynthesis in situ. Ambient inorganic nutrients (NO3, PO4, SiO4, and NH4) were all low in the waters and deep waters surrounding the red tide patch, suggesting that the nutrients were not high enough to support the high chl a >50 mu g l(-1) in the red tide. Nutrient addition experiments showed that the addition of all of the inorganic nutrients to a non-red-tide water sample containing low concentrations of Scrippsiella trochoidea did not produce cell density of Scrippsiella trochoidea as high as in the red tide patch, suggesting that nutrients were not an initializing factor for this red tide. During the incubation of the red tide water sample without any nutrient addition, the phytoplankton biomass decreased gradually over 9 days. However, with a N addition, the phytoplankton biomass increased steadily until day 7, which suggested that nitrogen addition was able to sustain the high biomass of the red tide for a week with and without nutrients. In contrast, the red tide in the bay disappeared on the sampling day when the wind direction changed. These results indicated that initiation, maintenance and disappearance of the dinoflagellate Scrippsiella trochoidea red tide in the bay were not directly driven by changes in nutrients. Therefore, how nutrients are linked to the formation of red tides in coastal waters need to be further examined, particularly in relation to dissolved organic nutrients. (C) 2008 Elsevier B.V. All rights reserved.

Isolation and characterization of a marine magnetotactic spirillum axenic culture QH-2 from an intertidal zone of the China Sea

Magnetotactic bacteria (MTB) are ubiquitous in aquatic habitats. Because of their fastidious requirements for growth conditions, only very few axenic MTB cultures have been obtained worldwide. In this study, we report a novel marine magnetotactic spirillum axenic culture, designated as QH-2, isolated from the China Sea. It was able to grow in semi-solid or liquid chemically defined medium. The cells were amphitrichously flagellated and contained one single magnetosome chain with an average number of 16 magnetosomes per cell. Phosphate and lipid granules were also observed in the cells. Both rock magnetism and energy-dispersive X-ray spectroscopy characterizations indicated that the magnetosomes in QH-2 were single-domain magnetites (Fe3O4). QH-2 cells swam mostly in a straight line at a velocity of 20-50 mu m/s and occasionally changed to a helical motion. Unlike other magnetotactic spirilla. QH-2 cells responded to light illumination. As a consequence of illumination, the cells changed the direction in which they swam from parallel to the magnetic field to antiparallel. This response appears to be similar to the effect of an increase in [O-2]. Analysis of the QH-2 16S rRNA sequence showed that it had greater than 11% sequence divergence from freshwater magnetotactic spirilla. Thus, the marine QH-2 strain seems to be both phylogenetically and magnetotactically distinct from the freshwater Magnetospirillum spp. studied previously. (C) 2010 Elsevier Masson SAS. All rights reserved.

Laurencia nanhaiense sp nov., a new species of the genus Laurencia(Rhodomelaceae, Rhodophyta) from China

Laurencia nanhaiense sp. nov. (Rhodomelaceae, Rhodophyta) is described from Hainan and Guangdong Provinces, China. The new species clearly displays one of the defining features of the genus, viz. four periaxial cells per vegetative axial segment. It differs from other closely related species in having a combination of features such as terete axes from a basal system composed of a primary, discoid holdfast and a secondary attachment to give rise to many short rhizoids, branching oppositely and alternately, irregularly tristichous or subverticillately polystichous, having more curve branches with very sparse, adventitious ultimate branchlets, non-projecting superficial cortical cells at the apices of ultimate branchlets, presence of longitudinally oriented secondary pit-connections between contiguous superficial cortical cells, absence of lenticular thickenings in the walls of medullary cells, parallel arrangement of tetrasporangia along the axis of stichidia, and presence of intercellular spaces between medullary cells.

Genetic improvement on Chinese shrimp (Fenneropenaeus chinensis): growth and viability performance in F1 hybrids of different populations

Fenneropenaeus chinensis distributed in the Yellow Sea and Bohai Sea of China and the west coast of the Korean Peninsula. Different geographical populations represent potentially different genetic resources. To learn further the characteristics of different geographical population, crosses among two wild and three farmed populations were produced. The two wild populations were from the Yellow Sea and Bohai Sea (WYP), and the west coast of the Korean Peninsula and coast (WKN). The three farmed populations included the offspring of first generation of wild shrimp from coast in Korea (FKN), the Huang Hai (the Yellow Sea in Chinese) No.1 (HH1), and JK98. The phenotypes growth and survival rates of these populations were compared to confirm the feasibility for crossbreeding. The body length (BL), carapace length (CL), carapace width (CW), height of the second and third abdominal segment (HST), width of the second and third abdominal segment (WST), length of the first abdominal segment (LF), length of the last abdominal segment (LL), live body weight (BW), and survival rate were measured. Different combinations were statistically performed with ANOVA and Duncan's Multiple Range Test. The results show that the survival rate of JK98(a (TM) Euro)xWKN(a (TM),) was the highest, followed by WYP(a (TM) Euro)xWKN(a (TM),), FKN(a (TM) Euro)xWYP(a (TM),), FKN(a (TM) Euro)xHH1(a (TM),) and WYP(a (TM) Euro)xFKN(a (TM),); the body weight of FKN(a (TM) Euro)sxHH1(a (TM),) was the highest, followed by FKN(a (TM) Euro)xWYP(a (TM),), WYP(a (TM) Euro)xWKN(a (TM),), WYP(a (TM) Euro)xFKN(a (TM),) and JK98(a (TM) Euro)xWKN(a (TM),); the total length had the same ranking as the body weight. All growth traits in hybrids JK98(a (TM) Euro)xWKN(a (TM),) were the lowest among all combinations. F1 hybrids had significant difference (P < 0.05) in BL, CL, HST, LL, and BW; and insignificant difference (P > 0.05) in other growth traits and survival rate. The results of Duncan's Multiple Range Test are that BL and CL of JK98(a (TM) Euro)xWKN(a (TM),) were significantly different from the other combinations; HST different from the combination of FKN(a (TM) Euro)xWYP(a (TM),), FKN(a (TM) Euro)xHH1(a (TM),) and WYP(a (TM) Euro)xWKN(a (TM),); and BW different from FKN(a (TM) Euro)xWYP(a (TM),) and FKN(a (TM) Euro)xHH1(a (TM),). As a whole, the results indicate that the FKN(a (TM) Euro)xHH1(a (TM),) was the best combination in all growth traits. Therefore, hybridization can introduce the variation to base populations. The systematic selection program based on additive genetic performance may be more effective than crossbreeding.

Some new triazole derivatives as inhibitors for mild steel corrosion in acidic medium

Two triazole derivatives, 3,4-dichloro-acetophenone-O-1'-(1',3',4'-triazolyl)-methaneoxime (4-DTM) and 2,5-dichloro-acetophenone-O-1'-(1',3',4'-triazolyl)-methaneoxime (5-DTM) were synthesized, and the inhibition effects for mild steel in 1 M HCl solutions were investigated by weight loss measurements, electrochemical tests and scanning electronic microscopy (SEM). The weight loss measurements showed that these compounds have excellent inhibiting effect at a concentration of 1.0 x 10(-3) M. The potentiodynamic polarization experiment revealed that the triazole derivatives are inhibitors of mixed-type and electrochemical impedance spectroscopy (EIS) confirmed that changes in the impedance parameters (R-ct and C-dl) are due to surface adsorption. The inhibition efficiencies obtained from weight loss measurements and electrochemical tests were in good agreement. Adsorption followed the Langmuir isotherm with negative values of the free energy of adsorption Delta G(ads)(o). The thermodynamic parameters of adsorption were determined and are discussed. Results show that both 4-DTM and 5-DTM are good inhibitors for mild steel in acid media.

Synthesis and quantum-chemistry analysis on novel triazole compounds containing ester group

Nine novel triazole compounds containing ester group were designed and synthesized. Their structures were confirmed by elemental, H-1 NMR and IR analyses, and optimized by means of DFT (Density Functional Theory) method at the B3LYP/6-31G* level. Based on the quantum-chemical calculation results and the Pearson coefficients between FA and quantumchemical parameters, V, LogP, MR and E-HOMO are shown to be the important relative factors which affect FA of the title compounds.

Synthesis and QSAR studies of novel triazole compounds containing thioamide as potential antifungal agents

Eighteen novel triazole compounds containing thioamide were designed and synthesized. Their structures were confirmed by elemental analysis, H-1 NMR, IR, and MS. The title compounds exhibited certain antifungal activity. And the geometry structures of the title compounds were optimized by means of the density functional theory (DFT) method at B3LYP/6-31G* level. The quantitative structure-activity relationship (QSAR) of the title compounds was systematically investigated. A correlative equation between FA and DELH, V was well established by using the multiple linear regression (MLR). (c) 2006 Elsevier Ltd. All rights reserved.

Theoretical investigation on the adsorption of Ag+ and hydrated Ag+ cations on clean Si(111) surface

In this paper, the adsorption of Ag+ and hydrated Ag+ cations on clean Si(111) surface were investigated by using cluster (Gaussian 03) and periodic (DMol(3)) ab initio calculations. Si(111) surface was described with cluster models (Si14H17 and Si22H21) and a four-silicon layer slab with periodic boundary conditions. The effect of basis set superposition error (BSSE) was taken into account by applying the counterpoise correction. The calculated results indicated that the binding energies between hydrated Ag+ cations and clean Si(111) surface are large, suggesting a strong interaction between hydrated Ag+ cations and the semiconductor surface. With the increase of number, water molecules form hydrogen bond network with one another and only one water molecule binds directly to the Ag+ cation. The Ag+ cation in aqueous solution will safely attach to the clean Si(111) surface.

Detection of carbohydrates using new labeling reagent 1-(2-naphthyl)-3-methyl-5-pyrazolone by capillary zone electrophoresis with absorbance (UV)

A novel labeling reagent 1-(2-naphthyl)-3-methyl-5-pyrazolone (NMP) coupled with capillary electrophoresis (CE) with DAD detection for the determination of carbohydrates has been developed. The chromophore in the 1-phenyl-3-methyl-5-pyrazolone (PMP) reagent is replaced by naphthyl functional group, which results in a reagent with very high molar absorptivity (epsilon(251nm) = 5.58 x 10(4) L mol(-1) cm(-1)). This pen-nits NMP-labeled carbohydrates to be detected with UV absorbance in standard 50-mu m-i.d. fused silica capillaries by zone electrophoresis. in this mode, nanomolar concentrations of detection limits are obtained. The method for the derivatization. of carbohydrates with NMP is simplified. The derivatization reaction is rapid and mild in the presence of ammonia catalyst without further transfer steps. Nine monosaccharide derivatives such as mannose, galacturonic acid, glucuronic acid, rhamnose, glucose, galactose, xylose, arabinose and fucose can successfully be detected in CE mode. Good reproducibility can be obtained with relative standard deviation (R.S.D.) values of the migration times and peak area, respectively, from 0.44 to 0.48 and from 3.2 to 4.8. Furthermore, the developed method has been successfully applied to the analysis of carbohydrates in the hydrolyzed rape bee pollen samples. (C) 2008 Published by Elsevier B.V.

A new guaiane diterpenoid from Euphorbia wallichi

A new guaiane-type diterpenoid, (1 alpha, 5 alpha, 7 alpha)-3,10(18), 11-dictytriene-19-acid, was obtained from the roots of Euphorbia wallichii. This is the first isolation of guaiane diterpene from this genus of Euphorbia. The structure was elucidated by spectral methods. And the compound was tested for the cytotoxicities on the cancer cell line P-388 and A-549 in vitro.

两种超微细矿物粉体材料的制备及应用研究

Superfine mineral materials are mainly resulted from the pulverization of natural mineral resources, and are a type of new materials that can replace traditional materials and enjoy the most extensive application and the highest degree of consumption in the present day market. As a result, superfine mineral materials have a very broad and promising prospect in terms of market potential. Superfine pulverization technology is the only way for the in-depth processing of most of the traditional materials, and is also one of the major means for which mineral materials can realize their application. China is rich in natural resources such as heavy calcite, kaolin, wollastonite, etc., which enjoy a very wide market of application in paper making, rubber, plastics, painting, coating, medicine, environment-friendly recycle paper and fine chemical industries, for example. However, because the processing of these resources is generally at the low level, economic benefit and scale for the processing of these resources have not been realized to their full potential even up to now. Big difference in product indices and superfine processing equipment and technologies between China and advanced western countries still exists. Based on resource assessment and market potential analysis, an in-depth study was carried out in this paper about the superfine pulverization technology and superfine pulverized mineral materials from the point of mineralogical features, determination of processing technologies, analytical methods and applications, by utilizing a variety of modern analytical methods in mineralogy, superfine pulverization technology, macromolecular chemistry, material science and physical chemistry together with computer technology and so on. The focus was placed on the innovative study about the in-depth processing technology and the processing apparatus for kaolin and heavy calcite as well as the application of superfine products. The main contents and the major achievements of this study are listed as follows: 1. Superfine pulverization processing of mineral materials shall be integrated with the study of their crystal structures and chemical composition. And special attention shall be put on the post-processing technologies, rather than on the indices for particle size, of these materials, based on their fields of application. Both technical feasibility and economic feasibility shall be taken into account for the study about superfine pulverization technologies, since these two kinds of feasibilities serve as the premise for the industrialized application of superfine pulverized mineral materials. Based on this principle, preposed chemical treatment method, technology of synchronized superfine pulverization and gradation, processing technology and apparatus of integrated modification and depolymerization were utilized in this study, and narrow distribution in terms of particle size, good dispersibility, good application effects, low consumption as well as high effectiveness of superfine products were achieved in this study. Heavy calcite and kaolin are two kinds of superfine mineral materials that enjoy the highest consumption in the industry. Heavy calcite is mainly applied in paper making, coating and plastics industries, the hard kaolin in northern China is mainly used in macromolecular materials and chemical industries, while the soft kaolin in southern China is mainly used for paper making. On the other hand, superfine pulverized heavy calcite and kaolin can both be used as the functional additives to cement, a kind of material that enjoys the biggest consumption in the world. A variety of analytical methods and instruments such as transmission and scanning electron microscopy, X-ray diffraction analysis, infrared analysis, laser particle size analysis and so on were applied for the elucidation of the properties and the mechanisms for the functions of superfine mineral materials as used in plastics and high-performance cement. Detection of superfine mineral materials is closely related to the post-processing and application of these materials. Traditional detection and analytical methods for superfine mineral materials include optical microscopy, infrared spectral analysis and a series of microbeam techniques such as transmission and scanning electron microscopy, X-ray diffraction analysis, and so on. In addition to these traditional methods, super-weak luminescent photon detection technology of high precision, high sensitivity and high signal to noise ratio was also utilized by the author for the first time in the study of superfine mineral materials, in an attempt to explore a completely new method and means for the study of the characterization of superfine materials. The experimental results are really exciting! The innovation of this study is represented in the following aspects: 1. In this study, preposed chemical treatment method, technology of synchronized superfine pulverization and gradation, processing technology and apparatus of integrated modification and depolymerization were utilized in an innovative way, and narrow distribution in terms of particle size, good dispersibility, good application effects, low consumption as well as high effectiveness of superfine products were achieved in the industrialized production process*. Moreover, a new modification technology and related directions for producing the chemicals were invented, and the modification technology was even awarded a patent. 2. The detection technology of super-weak luminescent photon of high precision, high sensitivity and high signal to noise ratio was utilized for the first time in this study to explore the superfine mineral materials, and the experimental results can be compared with those acquired with scanning electron microscopy and has demonstrated its unique advantages. It can be expected that further study may possibly help to result in a completely new method and means for the characterization of superfine materials. 3. During the heating of kaolinite and its decomposition into pianlinite, the diffraction peaks disappear gradually. First comes the disappearance of the reflection of the basal plane (001), and then comes the slow disappearance of the (hkl) diffraction peaks. And this was first discovered during the experiments by the author, and it has never before reported by other scholars. 4. The first discovery of the functions that superfine mineral materials can be used as dispersants in plastics, and the first discovery of the comprehensive functions that superfine mineral materials can also be used as activators, water-reducing agents and aggregates in high-performance cement were made in this study, together with a detailed discussion. This study was jointly supported by two key grants from Guangdong Province for Scientific and Technological Research in the 10th Five-year Plan Period (1,200,000 yuan for Preparation technology, apparatus and post-processing research by using sub-micron superfine pulverization machinery method, and 300,000 yuan for Method and instruments for biological photon technology in the characterization of nanometer materials), and two grants from Guangdong Province for 100 projects for scientific and technological innovation (700,000 yuan for Pilot experimentation of superfine and modified heavy calcite used in paper-making, rubber and plastics industry, and 400,000 yuan for Study of superfine, modified wollastonite of large length-to-diameter ratio).

湛江湖光岩玛珥湖55ka以来植硅体化石记录及古环境变迁

The study of biogenic proxy of tropical and subtropical regions provides important evidence about the process and history of vegetation and environmental changes, and is of globally importance for understanding the dynamic mechanism of paleoclimatic and paleoenvironmental changes. The sediments from the Huguangyan Maar lake in Guangdong Province offer a continuous high-resolution record of the past 55 ka about environmental and vegetational changes. The studies of chronology, and physical, chemical environmental proxies have provided much important information about the paleoenvironmental and paleoclimatic histories. The phytolith, a new biogenicl proxy, has been used to determine the nature and types of plants in this area since the last 55 ka. This study presents a preliminary result about the characteristics of phytolith shapes, the variations of the fossils assemblages, and their significance for environmental changes. Moreover, the author probes the process of special specie evolution and their relationship to climatic parameters. The history of fire has been reconstructed based on the variations in charcoals. The main results and conclusions include: 28 types of phytoliths from 233 samples have been identified. Their environmental meanings are investigated in detail. Based on the variations in phytolith associations, the history and process of climatic and environmental changes in the last 55 kaBP have been established for this region. Climatic changes experienced eight intervals during this period, showing the variations of hot-humid to cool-try climate in the ten thousands years scale, and a shorter dry-hot climate condition in millennial scale. The history of palm plant has been established in this region. Two peaks appeared from 55-39 ka and since the Holocene. Plants in Bambusoideae have been growing in this area all the period, representing the impact of the East Asian summer monsoon. Bamboo plants have similar tendency in their abundance to palm plants, but with a lag of 1-2 ka BP. Panicoideae plants, the representative of C4 plants, have 6 flourishing periods occurred at 54.5, 44, 41.5, 32.5, 14, and 10 kaBP, respectively, reflecting 6 times short-term arid events. Charcoal record from the Huguang Marr lake reveals the history of nature fire, that mostly happened in dry period of last glacial from 55-10 kaBP, centered at 50-45, 40-35, 30-25, and 20-15kaBP, showing about a cycle of 10,000 years.

岩石圈伸展对粤北下庄矿田铀成矿的制约机制研究

地球动力学与成矿关系的研究是地球科学研究的前沿领域，而陆内岩石圈伸展与成矿的关系的研究则是该领域相对比较薄弱的环节。 华南地区于白垩—古近纪发生了岩石圈强烈的伸展减薄事件，且岩石圈伸展减薄与该区同时期形成的众多金属和非金属矿床有密切的成因联系，尤其是华南地区的花岗岩型热液铀矿床，显示了与该区岩石圈伸展作用可能有多方面的成因联系。粤北下庄铀矿田位于位于南岭铀-多金属成矿带的南部，是华南地区典型的花岗岩型热液铀矿区，本次研究在深入细致的野外地质工作的基础上，运用流体包裹体地球化学、元素地球化学、同位素地球化学等方法手段，开展了对下庄铀矿田成矿流体性质、成矿过程中元素的活动规律、成矿流体来源及演化等方面的系统研究，初步探讨了岩石圈伸展对该区铀成矿的制约机制，并建立了可能的矿床成因模式。通过研究，本次工作获得了以下几点主要认识： （1）通过对下庄铀矿田部分铀矿床流体包裹体显微测温、激光拉曼光谱及液相成分分析研究，查明了下庄矿田铀矿床矿前期热液属中高温（200℃~350℃）、低盐度（0.72%~5.95%NaCl）、密度中等（0.703~0.830g/cm3）、活动深度较深（2.29km~5.74km）、富∑CO2、相对还原性质的流体；成矿期热液属中低温（主要为154℃ ~250℃）、低盐度（0~1.83%NaCl）、密度中等（0.628~0.867g/cm3）、活动深度较浅（0.19km~1.62km）、富F-、相对氧化性质的流体。 （2）矿石矿矿物电子探针测试分析及岩、矿石的微量元素地球化学分析研研究表明，本区铀矿床主要的原生铀矿物为沥青铀矿、铀石、钛铀矿，铀矿物的形成与Si、Ca、W等元素有密切的关系，而其它金属元素未显示明显地富集。矿石、脉石矿物部分继承了原岩的稀土元素组成，且在原岩基础上又有高度的演化。 （3）进行了矿区内碳酸盐的C、O同位素和黄铁矿的He、Ar稀有气体同位素的分析研究。研究表明，矿化剂∑CO2主要为幔源，大量的He、Ar等稀有气体也来自于地幔。矿区发育的深大断裂构造可能控制了幔源挥发份的加入。 （4）脉石矿物碳酸盐和萤石的Sr、Nd同位素地球化学研究显示，成矿流体中的这些元素主要源于地壳，南区矿床（338、339）的Sr、Nd组成则为富含壳源Sr、Nd的流体与幔源基性脉岩不同程度的水—岩反应所致。另外，碳酸盐铅同位素研究显示，下庄矿区成矿物质铀可能来自帽峰式后期流体交代的花岗岩体。 （5）岩石圈伸展与下庄矿田铀成矿有关系密切：下庄矿田铀矿床明显受伸展构造控制，伸展构造既为导矿构造，又为储矿构造；岩石圈伸展导致的地温梯度升高，大地热流平均值加大，驱动热液流体的流动，为铀成矿提供了主要的热驱动力；岩石圈伸展产生的深大断裂导通了壳幔间的联系，使幔源脱气成因挥发份（主要为∑CO2）沿断裂上升，加入壳源热水循环系统，从而参与了铀成矿。 （6）初步建立了下庄矿田“岩石圈伸展体系下大陆热水系统铀矿床成因模式”。模式认为，华南地区白垩—古近纪岩石圈伸展作用引发区内热水流体的大规模循环，且伸展引起的幔源脱气作用产生的挥发份（主要为ΣCO2）加入了贫铀、贫矿化剂的循环的地下热水中，形成了富矿化剂热水。富矿化剂热水从富铀花岗岩中浸出铀（氧化作用），变为富矿化剂、富铀热液流体，这种热液流体在伸展引起的热驱动下沿构造上升，热液流体上升到浅部时，由于地球化学障、流体压力释放等因素的影响，U被还原沉淀，并在有利部位富集成矿。