High precision GPS network with precise ephemerides and earth body tide model

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Custo Leite para Windows: Software de Controle de Custos para a Pecuária Leiteira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do nível de multicaminho no posicionamento relativo GPS e sua atenuação através da análise de multiresolução

The multipath effect affects the differential and relative positioning, even that one involving short baselines. So it is necessary to detect this effect, check the caused error level, and mainly, its removal. This paper aims at analysing and comparing some useful components in the detection of this effect. These components are the Signal to Noise Ratio (SNR), the values of MP1 and MP2 obtained from the TEQC software that indicates the multipath level in the carriers L1 and L2, the multipath repeatability in consecutive days and the elevation angle and the azimuth of the satellites. For this purpose, an experiment is carried out, comparing such components in the presence and the absence of reflector objects that cause the multipath. Not only there is clear multipath repeatability in the residuals, but it also appears in the measures SNR, MP1 and MP2, reaching up 99% of correlation. For reduction, at least, of the high frequency multipath effect, the Multi-Resolution Analysis using wavelets is applied in the double differences (DD) measures. Some statistical tests were accomplished, which indicate results improvement, and mainly, larger reliability in the solution of the ambiguities, reaching up 49% of improvement concerning the Ratio test without applying the proposed method.

Otimização da distância de extração de madeira com forwarder

The activities and management operations of wood harvesting do not have good computational tools available to help the forest technicians with the task of cost reduction. In many cases, machines of high investment are used in wood harvesting without adequate operation planning; consequently, the cost per hour of these machines, which is high, could be reduced. Using technological resources such as the Geographic Information Systems (GIS) integrated with the Global Positioning System (GPS), which are the basis of precision harvesting. In this research, a technological tool capable of calculating and optimizing the average skidding distance of the forwarder was developed. It was used in stands of different sizes and formats through mathematical techniques and available functionalities in the Geographic Information System GRASS. The developed tool, called optimized model, divides the stand in small parts in relation to shorter skidding distances. The main variable considered was the alignment of plantation. The model was tested in eucalypt stands located in the State of São Paulo. Sixteen stands were randomly selected: eight with a rectangular polygon form, and eight with irregular polygon form. The main variables were collected in these stands. Results showed that the optimized model developed, is efficient and flexible. It was possible to divide the stands in small parts resulting in smaller skidding medium distances. The stands with irregular form had shorter skidding medium distances than the rectangular stands.

Ajustamento de redes gps em conformidade com as exigências da lei 10.267/2001

In the Brazil, several have been the applications of GPS and with the introduction of the Law 10.267/2001 that among other dispositions, it treats of the georeferencing of the rural parcels. However, most of the commercial softwares of processing and adjustment of GPS data doesn't allow that the users may evaluate their results in a reliable way. For example, the constraints are normally used as absolute, which provides results with very optimists precisions. The adoption of additional analyses and the implementation of softwares can reduce these kinds of problems. Thus, it was developed a software for adjustment of GPS networks, aiming to assist in a reliable way the requirements of the Law 10.267/2001. In this context, in this work it is analyzed the adjustments of GPS networks, utilizing absolute and relative constraints. In the case of the last one, the adjustments were accomplished considering and not considering the correlations among the coordinate positions.

Desenvolvimento de uma Plataforma de Software para a Modelagem Digital de Terrenos baseada em TIN

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de um sistema informatizado de menor custo para aquisição e armazenamento de dados de sensores analógicos e receptor GPS

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Wizard CD Plus and ProTaper Universal: analysis of apical transportation using new software

Objective: This study has two aims: 1) to evaluate the apical transportation of the Wizard CD Plus and ProTaper Universal after preparation of simulated root canals; 2) to compare, with Adobe Photoshop, the ability of a new software (Regeemy) in superposing and subtracting images. Material and Methods: Twenty five simulated root canals in acrylic-resin blocks (with 20 degrees curvature) underwent cone beam computed tomography before and after preparation with the rotary systems (70 kVp, 4 mA, 10 s and with the 8x8 cm FoV selection). Canals were prepared up to F2 (ProTaper) and 24.04 (Wizard CD Plus) instruments and the working length was established to 15 mm. The tomographic images were imported into iCAT Vision software and CorelDraw for standardization. The superposition of pre- and post-instrumentation images from both systems was performed using Regeemy and Adobe Photoshop. The apical transportation was measured in millimetres using Image J. Five acrylic resin blocks were used to validate the superposition achieved by the software. Student's t-test for independent samples was used to evaluate the apical transportation achieved by the rotary systems using each software individually. Student's t-test for paired samples was used to compare the ability of each software in superposing and subtracting images from one rotary system per time. Results: The values obtained with Regeemy and Adobe Photoshop were similar to rotary systems (P>0.05). ProTaper Universal and Wizard CD Plus promoted similar apical transportation regardless of the software used for image's superposition and subtraction (P>0.05). Conclusion: Wizard CD Plus and ProTaper Universal promoted little apical transportation. Regeemy consists in a feasible software to superpose and subtract images and appears to be an alternative to Adobe Photoshop.

An open source GPS multipath simulator in Matlab/Octave

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tarefas de triangulação com restrições perceptuais em pessoas com deficiência auditiva: um estudo por meio de gps

This study aimed to investigate how people with hearing disability perform tasks of distances estimation for locomotion and navigation when deprived of effective perceptual and proprioceptive information. For this, participants with hearing disability went three distances being the first and second 100 meters and the third 140 meters (triangulation) from a source point in an inverted L open field trajectory and then returned to the origin, and the first two were driven by a researcher guide with adapted GPS coordinates of the study, and the third being three free-form sessions, the first one without any perceptual and proprioceptive restriction, the second without visual perception, and the third on the wheel-chair, that is, without proprioception. The results showed that people with hearing disability without the knowledge of the path do not possess satisfactory accuracy but when they learn the way even with the restriction of visual perception and proprioception they can return to the starting point in a task of triangulation. The "t" students test with a significance level of 5% (2.131) indicates significant differences between the first task without any perceptual restriction and the third where they performed in the wheelchair. To achieve these results we used remote monitoring via GPS and the TrackMaker software.

Validity and behaviour of tropospheric gradients estimated by GPS in Corsica

Estimation of tropospheric gradients in GNSS data processing is a well-known technique to improve positioning (e.g. Bar-Sever et al., 1998; Chen and Herring, 1997). More recently, several authors also focused on the estimation of such parameters for meteorological studies and demonstrated their potential benefits (e.g. Champollion et al., 2004). Today, they are routinely estimated by several global and regional GNSS analysis centres but they are still not yet used for operational meteorology.This paper discusses the physical meaning of tropospheric gradients estimated from GPS observations recorded in 2011 by 13 permanent stations located in Corsica Island (a French Island in the western part of Italy). Corsica Island is a particularly interesting location for such study as it presents a significant environmental contrast between the continent and the sea, as well as a steep topography.Therefore, we estimated Zenith Total Delay (ZTD) and tropospheric gradients using two software: GAMIT/GLOBK (GAMIT version 10.5) and GIPSY-OASIS II version 6.1. Our results are then compared to radiosonde observations and to the IGS final troposphere products. For all stations we found a good agreement between the ZWD estimated by the two software (the mean of the ZWD differences is 1 mm with a standard deviation of 6 mm) but the tropospheric gradients are in less good agreement (the mean of the gradient differences is 0.1 mm with a standard deviation of 0.7 mm), despite the differences in the processing strategy (double-differences for GAMIT/GLOBK versus zero-difference for GIPSY-OASIS).We also observe that gradient amplitudes are correlated with the seasonal behaviour of the humidity. Like ZWD estimates, they are larger in summer than in winter. Their directions are stable over the time but not correlated with the IWV anomaly observed by ERA-Interim. Tropospheric gradients observed at many sites always point to inland throughout the year. These preferred directions are almost opposite to the largest slope of the local topography as derived from the world Digital Elevation Model ASTER GDEM v2. These first results give a physical meaning to gradients but the origin of such directions need further investigations.

Desenvolvimento de um software de aquisição de dados georreferenciados e análise de aplicabilidade em área urbana com vegetação de Cerrado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Posicionamento por ponto preciso com solução de ambiguidades inteiras no contexto de rede GPS

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Quantitative analysis of photodynamic therapy effects in rat mammary tumor vascular density using image-pro plus software

Photodynamic therapy (PDT) is a treatment modality that has advanced rapidly in recent years. It causes tissue and vascular damage with the interaction of a photosensitizing agent (PS), light of a proper wavelength, and molecular oxygen. Evaluation of vessel damage usually relies on histopathology evaluation. Results are often qualitative or at best semi-quantitative based on a subjective system. The aim of this study was to evaluate, using CD31 immunohistochem- istry and image analysis software, the vascular damage after PDT in a well-established rodent model of chemically induced mammary tumor. Fourteen Sprague-Dawley rats received a single dose of 7,12-dimethylbenz(a)anthraxcene (80 mg/kg by gavage), treatment efficacy was evaluated by comparing the vascular density of tumors after treatment with Photogem® as a PS, intraperitoneally, followed by interstitial fiber optic lighting, from a diode laser, at 200 mW/cm and light dose of 100 J/cm directed against his tumor (7 animals), with a control group (6 animals, no PDT). The animals were euthanized 30 hours after the lighting and mammary tumors were removed and samples from each lesion were formalin-fixed. Immunostained blood vessels were quantified by Image Pro-Plus version 7.0. The control group had an average of 3368.6 ± 4027.1 pixels per picture and the treated group had an average of 779 ± 1242.6 pixels per area (P < 0.01), indicating that PDT caused a significant decrease in vascular density of mammary tumors. The combined immu- nohistochemistry using CD31, with selection of representative areas by a trained pathology, followed by quantification of staining using Image Pro-Plus version 7.0 system was a practical and robust methodology for vessel damage evalua- tion, which probably could be used to assess other antiangiogenic treatments.

Tecniche digitali per il rilievo, la modellazione tridimensionale e la rappresentazione nel campo dei beni culturali

Le soluzioni tecnologiche rese oggi disponibili dalle discipline della moderna Geomatica, offrono opportunità di grande interesse per il rilevamento nel settore dei Beni Culturali, sia per quanto riguarda il momento primario del rilievo, cioè la fase di acquisizione del dato metrico, sia per quanto concerne la questione della rappresentazione per oggetti di interesse archeologico, artistico, architettonico. Lo studio oggetto della presente tesi si propone, sulla base di numerose esperienze maturate nel corso del Dottorato dal Laboratorio di Topografia e Fotogrammetria del DISTART, di affrontare e approfondire le problematiche connesse all’utilizzo della fotogrammetria digitale e del laser a scansione terrestre per applicazioni nell’ambito dei Beni Culturali. La ricerca condotta è prettamente applicata, quindi è stata primaria l’esigenza di avere a disposizione reali casi di studio su cui sperimentare le tecniche di interesse; è però importante sottolineare che questo è un campo in cui ogni esperienza presenta proprie caratteristiche e peculiarità che la rendono interessante e difficilmente descrivibile con schemi convenzionali e metodologie standardizzate, quindi le problematiche emerse hanno di volta in volta indirizzato e spinto la ricerca all’approfondimento di certi aspetti piuttosto che altri. A tal proposito è stato evidenziato dalle esperienze effettuate che il campo dei Beni Culturali è forse il più emblematico delle potenzialità rese oggi disponibili dalle moderne tecnologie della Geomatica, e soprattutto dalle possibilità offerte da un approccio integrato e multi – disciplinare di tecniche e tecnologie diverse; per questo nell’Introduzione si è voluto sottolineare questo aspetto, descrivendo l’approccio metodologico adottato in molti lavori in contesto archeologico, che include generalmente diverse tecniche integrate tra loro allo scopo di realizzare in modo veloce e rigoroso un rilievo multi – scala che parte dal territorio, passa attraverso l’area del sito archeologico e degli scavi, ed arriva fino al singolo reperto; questo approccio è caratterizzato dall’avere tutti i dati e risultati in un unico e ben definito sistema di riferimento. In questa chiave di lettura l’attenzione si è poi focalizzata sulle due tecniche che rivestono oggi nel settore in esame il maggiore interesse, cioè fotogrammetria digitale e laser a scansione terrestre. La struttura della tesi segue le fasi classiche del processo che a partire dal rilievo porta alla generazione dei prodotti di rappresentazione; i primi due capitoli, incentrati sull’acquisizione del dato metrico, riguardano quindi da un lato le caratteristiche delle immagini e dei sensori digitali, dall’altro le diverse tipologie di sistemi laser con le corrispondenti specifiche tecniche; sempre nei primi capitoli vengono descritte le caratteristiche metodologiche e tecnico – operative e le relative problematiche delle due tipologie di rilievo. Segue un capitolo sulle procedure di calibrazione delle camere digitali non professionali, imperniato sull’utilizzo di software diversi, commerciali e sviluppati in house per questo scopo, prestando attenzione anche agli strumenti che essi offrono in termini di risultati ottenibili e di controllo statistico sugli stessi. La parte finale della tesi è dedicata al problema della rappresentazione, con l’obiettivo di presentare un quadro generale delle possibilità offerte dalle moderne tecnologie: raddrizzamenti, ortofoto, ortofoto di precisione e infine modelli tridimensionali foto – realistici, generati a partire sia da dati fotogrammetrici sia da dati laser.