Estudo das interferências da ansiedade no estado psicológico de atletas juniores de futebol

O futebol é reconhecidamente o esporte mais praticado no mundo e entre os vários fatores intra e extracampo que podem influenciar no resultado estão os aspectos psicológicos. Muitos jovens sonham em se tornar em se tornar grandes craques e conseguir sucesso, dinheiro e reconhecimento por meio deste esporte. Uma das principais competições para estes é a Copa São Paulo de Futebol Júnior que é um dos maiores torneios de futebol para atletas juniores do Brasil. Sabemos que um dos fatores que mais afetam os atletas é a ansiedade e está diretamente ligado, a importância da competição, de cada jogo, distância de casa, viagem de avião, mudança de hábitos, adaptação ao clima e fuso horário, entre outros aspectos que provocam um aumento da ansiedade. O objetivo deste estudo foi analisar o nível de ansiedade pré competitiva nos atletas de uma equipe no decorrer da primeira fase da competição, composta de três partidas, sendo estas a 1ª contra a equipe da casa, a 2ª contra uma equipe de grande porte do estado de São Paulo e a 3ª contra uma equipe que já estava eliminada. A amostra utilizada foi de vinte atletas do sexo masculino, na faixa etária entre dezesseis e dezoito anos, representantes do clube ABC Futebol Clube – RN. Foram utilizados documentos armazenados nos Bancos de Dados do LEPESPE (Laboratório de Estudos e Pesquisas em Psicologia do Esporte), do DEF-IB-UNESP, campus de Rio Claro obtidos através da utilização de um questionário adaptado do CSAI2 com questões fechadas, aplicado aos atletas em momento antecessor à partida, contando com a colaboração e disponibilidade de atletas e comissão técnica. Uma estréia contra a equipe da casa, uma partida decisiva contra uma equipe de grande porte ou um desafio contra um clube já desclassificado, mas valendo a decisão da classificação para a próxima fase; qual destes desafios desenca...(Resumo completo, clicar acesso eletrônico abaixo)

Análise da expressão do gene CaPox que codifica uma peroxidase de classe III envolvida na interação do cafeeiro com nematóides

A caracterização e isolamento do gene com expressão específica em raiz de café (Coffea arabica) que codifica uma peroxidase (CaPOX) e suas respectivas regiões promotoras, permitiu realizar a caracterização da expressão desse gene em reposta a estresse biótico (infecção por nematóides) assim como a análise funcional do seu promotor. Promotores tecido-específicos responsáveis pela regulação de genes responsivos a estresses bióticos tornam-se fundamentais em programas biotecnológicos que visam o aumento da resistência e tolerância vegetal. Partindo desse princípio, realizou-se a quantificação da expressão relativa do gene CaPOX em raízes de café utilizando plantas de Coffea arabica de um cultivar susceptível (Mundo Novo) e de outro cultivar resistente (IAC 388-17-1) a nematóides, respectivamente. Em paralelo utilizou- se plantas transgênicas de tabaco (Nicotiana tabacum SR1) contendo a versão completa do promotor do gene CaPOX em fusão transcricional ao gene repórter uidA (que codifica a β-glucuronidase; GUS) . A partir disso, pode-se observar que o gene CaPOX tem sua expressão aumentada em resposta a infecção por nematóides, sendo que a indução observada ocorre nos tempos iniciais pós-inoculação. Da mesma maneira, o promotor do gene CaPOX é responsivo a infecção por nematóides, sendo ativado nos tempos iniciais pós-inoculação

Tubo digestório de diplópodos e sua aplicabilidade em estudos de toxicidade de solos: uma revisão

Diplópodos são animais detritívoros sendo considerados importantes macro-artrópodos do solo, desempenhando importante papel na manutenção do equilíbrio do ecossistema. Comumente não apresentam população numerosa, mas desequilíbrios ambientais, mudanças climáticas e utilização de pesticidas podem eliminar possíveis competidores ocasionando explosões populacionais. Dotados de um corpo cilíndrico com 25 a 100 segmentos com cutícula; o exoesqueleto da maioria dos diplópodos é fortemente calcificado. Possuem diplossegmentos que se originam da fusão entre dois segmentos durante o desenvolvimento e a grande parte destes diplossegmentos apresenta dois pares de pernas, de onde deriva o nome Diplopoda. O tubo digestório destes animais é formado por três regiões: o intestino anterior, o médio e o posterior. Trabalhos com morfologia do tubo digestório de milípides são raros e na maioria antigos. Assim, este trabalho de conclusão de curso objetivou realizar uma revisão bibliográfica sobre as descrições morfológicas existentes sobre o tubo digestório de diplópodos visando rever a nomenclatura utilizada para os diferentes componentes presentes nas regiões que o compõem, principalmente para o tecido presente na região do intestino médio denominada até então de camada de “corpo gorduroso” constituinte do intestino médio. Foi intuito também, rever a utilização do tubo digestório de diplópodos como biomarcador em bioensaios de solos impactados. Após a revisão dos dados na literatura, ficou claro que a camada presente no intestino médio de diplópodos, denominada de “corpo gorduroso”, na realidade é constituída por células hepáticas, as quais foram descritas na literatura como sendo de distribuição aleatória, sem formar uma camada contínua

As Relações Públicas em contextos de internacionalização organizacional: um estudo de caso sobre a aquisição da Tilibra

The objective of this study is to demonstrate how Public Relations can deal with the issue of culture clash between companies undergoing mergers and acquisitions. Within this environment of organizational change, there is the question of human and social as well as the importance of the relationship with all the publics. The Public Relations professional should be part of the organization systems to inform and promote a culture present, and participated in the climates changes and its consequences within these environments

Desenvolvimento de vasos digestores de amostra para microondas doméstico

The application of microwave radiation on the sample preparation has been expanding increasingly in areas involving decomposition by wet and dry roads, fusion, extraction, acceleration of chemical reactions, for example. Currently, the use of microwave ovens for analytical purposes are recognized for having excellent performance for organic and inorganic samples. In the international market there are several kinds of microwaves oven which adapt the varied purposes, however yet with elevated prices which incapacitate your use as routine equipment in laboratory. Thus, many researchers have been choosing for developing own projects of microwaves oven production or to use domestic oven for the laboratory, with or without adaptations. For the evaluation of the proposed method was used in the Kjeldahl methodology for determining total nitrogen in samples of crude protein, using a domestic microwave oven and a digester pot made up in TeflonTM and distillation by steam. Were made to adapt and characterization of a domestic microwave oven, the confeccion vessel digester and the metal support for the vessel. The accuracy of the proposed method was confirmed by comparison of two methods, the standard method for conventional heating and by the proposed method, with heating by microwave radiation through the calculated values of relative standard deviation analysis

Avaliação do comportamento mecânico sob deformação da liga Ti- 30Ta visando aplicações biomédicas

Titanium and its alloys have been used for biomedical applications due their excellent properties such as high corrosion resistance, biocompatibility and mechanical properites. In this study, microstructural and mechanical properties of Ti-30Ta alloy was evaluated during its processing. Ti-30Ta alloy ingots were produced from sheets of commercially pure titanium (99.9%) and tantalum (99.9%). Its melting was realized in arc melting furnace in an argon atmosphere. After homogenizing at 1200ºC, ingots were cold worked by swaging. Samples with 13 mm in diameter were obtained. They were forging at the reduction ratios of 15%. After deformation, microstructure was evaluated by optical microscopy in each condition. Also, Vickers microhardness of samples was measured and phase constitution was evaluated using XRD analysis

Vitrocerâmicas para blindagens balísticas

The use of ceramic materials in ballistic armor is considerable. Such materials can be very harder and lighter than metallic materials commonly used and it presents advantages to replace metallic materials when necessary toughness can be achieved. However, as SiC and Al2O3 ceramic, traditionally used for shielding, still have high manufacturing cost or low density do not have enough to shield applications such as aircraft. An alternative is the glass-ceramics, ceramics obtained by controlled crystallization of glasses, whose properties can be adjusted by choosing the chemical composition of glass, heat treatment of crystallization and special treatments such as ion exchange on the surface, resulting in increased mechanical strength . The objective of this project is to study the kinetics of crystallization of a glass composition based on cordierite (2MgO.2Al2O3.5SiO2), low density and high hardness, for the manufacture of glass-ceramics for ballistic tests. Shown in this report are results of heat treatment of crystallization and characterization by thermal analysis (DSC) glass obtained previously, indicating uneven distribution of crystals, and drying, weighing, mixing of raw materials and a new fusion of glass, the same composition

Propriedades físicas de vidros Sb2O3-P2O5

This work presents experimental results of some physical properties of antimony phosphate glasses with compositions (x) Sb2O3 - (1-x) P2O5 (x = 0.75, 0.85, 0.90). Mechanical, thermal, optical and electrical properties were investigated: density, elastic moduli (Young's moduli and Poisson's ratio), Vickers microhardness, coefficient of thermal expansion, glass transition temperature, refractive index and electrical conductivity (for x = 0.75). There was no evidence of electronic conductivity by bipolaron hopping. Measurements of energy dispersive spectroscopy (EDS) showed that volatilization of Sb2O3 takes place during the glass melting

Geologia do depósito de ouro do alvo guarda-mor, na sequência Jaupaci (Israelândia - GO)

The study area of the Guarda-Mor target (Israelândia-GO) contextualizes the terrains of the estaern portion of the Arenópolis Magmatic Arc, more accurately, the Neoproterozoic associations inserted in the field of the Jaupaci volcano-sedimentary sequence. The mapped area is located in the central-western of Goiás state. The presente paper has as main objective to characterize the structural, petrographic and litogeochemistry of the target rocks beyond to compare these factors with the Mina Bacilândia rocks (Fazenda Nova-GO) in order to assess the genetic similarity of volcano-sedimentary units and deposits associated. The Guarda-Mor target is represented by the Jaupaci metavolcanic rocks sequence presenting bimodal volcanism. This sequence consists in metafelsic rocks like sericite/muscovite quartz schist, phyllite and metarriolites and/or metariodacites with calc-alkaline geochemical signature and metamafic rocks with tholeiitic character formed by actinolite - chlorite schist and chlorite - quartz schist. Besides the package of supracrustal rocks also can be observed the occurrence of a local intrusion syn- to late - tectonic named Granito Subvulcânico. In the study area beyond the marked volcanism also seen an event of crustal melting granitogênese evidenced by the presence of 2 granites at the east and the west of the map, Granito Israelândia and Granito Iporá respectively. Structural analysis both at the macro and micro have identified 3 deformation phases. The types of rock on the region record features in the metamorphic facies top and down. These features were subdivided into 3 metamorphic areas: the east and West areas show thermal metamorphism due to intrusion of adjacente granites while the central domain displays features of regional metamorphism. Gold mineralization of the Guarda –Mor deposit target suggests a possible structural control beyond pronounced the hydrothermal alteration. The mineralization may also be...

A Gestão de Relações Públicas em culturas organizacionais conflituosas: caso AB InBev

Cultural clashes are part of the intercultural relationships, and especially in the organizations, they cause differences interfering in the process of sharing experiences, expertise and coexistence. This study outlines some communicational actions, built to improve the management of intercultural relations in organizations. This study also is related to the sharing and discussions on the communication planning process and its importance in intercultural differences detained and promoting interfaces between public of “different worlds”. The discussion is supported by theoretical theory of organizations and organizational culture in order to demonstrate a number of aspects related to this subject, which are directly accustomed to public relations activities. It also presents an analysis of the multinational AB InBev, in order to illustrate the process of knowledge and relationships that is built through the construction of the meaning in intercultural environments, as is the case of this organization

A aplicação da teoria do lean seis sigma na prestação de serviços no setor agrícola

This thesis aims to analyze the applicability of Lean Six Sigma and DMAIC to improve processes focused on agriculture. We discuss the origins of each system separately, Lean Manufacturing, the Toyota plants in Japan, and Six Sigma, by Motorola in the U.S., and then appears to merge them and can meet their complementarities and synergy between their tools. Finally, we describe a case study focused on the harvesting department, applicable to all types of manuals crops, covering the production of fruits, vegetables and greens. This study shows the ability to reduce costs, increase productivity and elimination of defects that the methodology developed with the fusion of Lean Manufacturing with Six Sigma allows

Amplificação, clonagem e sequenciamento de promotores de café (Coffea arabica cv Mundo Novo) específicos de fruto e ubíquos

The Coffee Genome Project made available to the scientific community relevant information that made practical the identification and cloning of important genes, as well as the identification of the major sequences involved on their regulation. The aim of the present study was to amplify, clone and sequence coffee promoters with specific expression patterns. For that, coffee ESTs which known expression profiles were employed. First, the promoter regions of coffee genes showing, respectively, fruitspecific and ubiquitous expression were amplified using the Genome Walking strategy. Amplified sequences were then inserted in the pGEM-Teasy vector (Promega) and sequenced. Once completed the sequencing, an expression cassette was constructed using the binary vector pCAMBIA-1381z (Cambia). These expression cassettes were cloned into Agrobacterium tumefaciens, and transgenic tobacco plants were generated aiming the functional characterization of these promoters

Sistema biométrico de identificação de pessoas utilizando poros e minúcias de impressões digitais

The use of physical characteristics for human identification is known as biometrics. Among the many biometrics traits available, the fingerprint is the most widely used. The fingerprint identification is based on the impression patterns, as the pattern of ridges and minutiae, characteristics of first and second levels respectively. The current identification systems use these two levels of fingerprint features due to the low cost of the sensors. However, the recent advances in sensor technology, became possible to use third level features present within the ridges, such as the perspiration pores. Recent studies show that the use of third-level features can increase security and fraud protection in biometric systems, since they are difficult to reproduce. In addition, recent researches have also focused on multibiometrics recognition due to its many advantages. The goal of this research project was to apply fusion techniques for fingerprint recognition in order to combine minutia, ridges and pore-based methods and, thus, provide more robust biometrics recognition systems, and also to develop an automated fingerprint identification system using these three methods of recognition. We evaluated isotropic-based and adaptive-based automatic pore extraction methods, and the fusion of pore-based method with the identification methods based on minutiae and ridges. The experiments were performed on the public database PolyUHRF and showed a reduction of approximately 16% in the EER compared to the best results obtained by the methods individually

Propriedades térnicas de géis e xerogéis híbridos de sílica/orgânico à base de GPTS-TEOS com diferentes concentrações de GPTS

In the present work the thermal characteristics of gels and xerogels of Silica/organic hybrids derived from different concentrations of GPTS-TEOS were investigated by thermal analysis (TG, DTA, and DSC). The preparation of gels of the Silica/organic hybrid matrix was held through the sol-gel process, consisting by the hydrolysis of alkoxides GPTS and TEOS in proportion (1:1) and (1:2) that was promoted in acidic conditions under reflux and stirring at 80oC/2h, producing the matrix in the colloidal state (sol). Gels were prepared by addition of NH4OH to the sol, promoting gelation of sol in sealed plastics containers. Part of the gels samples was analyzed by TG, DTS and DSC techniques in order to characterize water loss and degradation of the polymeric “epoxy” groups present in the structure of the silica derived from the GPTS alkoxide. Another set of samples was dried at 80oC/48h to obtain xerogels (dried gels) and analyzed by the same techniques. We obtained the characteristics temperatures of the matrix by the techniques DTA, DSC and TG, under measurements of thermal analysis until 800oC and 600oC in case of DSC. By thermal analysis (TG, DTA, and DSC) the main endothermic events (loss of water, melting, pyrolysis) and exothermic events (burning of the polymer) of the GPTS-TEOS matrix were determined

Proposta de um dispositivo para ajuste automático da altura de uma cama hospitalar

This paper proposes a mechanical device to adapt a simple model of hospital bed used in the Emergency Department at Santa Casa of Guaratinguetá, allowing the bed’s height adjustment with electromechanical drive. This adaptation aims to introduce improvements in the routine work of nurses and reduce ergonomic problems stemming from repetitive strain during the transfer of patients to stretchers and wheelchairs, as well as providing more comfort to the bedridden patient. The device is mainly composed of: an electric induction motor used to drive the engine, a steel spindle with square thread, which allows axial displacement of the bed, a transmission system with pulleys and belt, which transmits power supplied by the motor to the spindle. The mechanism allows the height of the bed is regulated between 400 and 800 mm. The estimated implementation cost of this proposal is lower than the acquisition cost of a commercial hospital bed with the same features, which confirms the feasibility of the proposed solution