Retention and processing methods of nasal prosthesis

Patients with congenital malformations, traumatic or pathological mutilation and maxillofacial developmental disorders can be restored aesthetically and emotionally by the production and use of facial prostheses. The aim of this study was to review the literature about the retention and processing methods of facial prostheses, and discuss their characteristics. A literature review on Medline (PubMed) database was performed by using the keywords maxillofacial prosthesis, silicone, resin, pigment, cosmetic, prosthetic nose, based on articles published from 1956 to 2010. Several methods of retention, from adhesives to the placement of implants, and different processing methods such as laser, CAD/CAM and rapid prototyping technologies have been reported. There are advantages and disadvantages of each procedure, and none can be classified as better compared to others.

Seleção de agentes alternativos ao ágar para propagação de plântulas de Cattleya loddigesii Lindley (Orchidaceae)

The aim of this study was to evaluate the in vitro growth of Cattleya loddigesii in alternative agents to agar with starch and physical matrix with acclimatization of regenerated plants. Protocorms with 90 days after sowing (0.5 cm of length) were subcultured in 1/2 MS culture medium among the treatments consisting of: agar 7 g L-1 (T1, which corresponds the control), agar 3,5 g L-1 with cassava starch 30 g L-1 (T2), cassava starch 60 g L-1 (T3), cotton fiber (T4) and chopped polyurethane foam (T5). Plantlets were retained in these treatments for over 150 days, and at the end of in vitro culture, were analyzed by their biometric data and acclimatized in a greenhouse during 120 days and evaluated the survival and relative growth rate (RGR). The substrate comprising of chopped polyurethane foam (T5) showed greater efficiency for growth in vitro and also increased survival rate, while substrate cassava starch (T3) provided delay for plantlet growth. Therefore, chopped polyurethane foam is recommended because of low cost and suitable characteristics for the propagation of Cattleya loddigesii.

Tooth embedding medium influences the accuracy of electronic apex locator

This study evaluated the influence of tooth embedding media on the accuracy ofan electronic apex locator. The root canal length of 20 human mandibular canines was measured by inserting a 15 K-file into the root canal up to the apical foramen. The distance was measured with a digital caliper. The embedding media evaluated were alginate, saline, floral foam or gauze soaked in saline. Electronic root canal length measurement was performed with Root ZX II. Data were analysed using ANOVA for repeated measurements and Tukey test, at a significance level of 5%. There was no difference between the actual root canal length measurement and the electronic reading recorded with alginate medium. The readings obtained with the other media differed from the actual root canal length measurements. Alginate provided greater accuracy in electronic root canal length determination by Root ZX II than saline, floral foam and gauze.

Design of microstructure of zirconia foams from the emulsion template properties

In this work, we investigate the correlations between structural and rheological properties of emulsified aqueous sol and the porous microstructure of monolithic zirconia foams, manufactured by the integrative combination of the sol-gel and emulsification processes. Macroporous zirconia ceramics prepared using different amounts of decahydronaphthalene, as oil phase, are compared in terms of the emulsion microstructure and ceramic porosity. A combination of electrical conductivity, oil droplet diameter, and rheological measurements was used to highlight the key effect of the dynamic structural properties of the emulsion on the porosity of the ceramic zirconia foam. The minimization of drying shrinkage by appropriate sol-gel mineralization of the oil droplet wall enabled versatile and easy tuning of the ceramic foam microstructure, by fine adjustment of the emulsion characteristics. The foam with the highest porosity (90%) and the lowest bulk density (0.40 g cm-3) was prepared from emulsion with 80 wt% of decahydronaphthalene, which also showed a bicontinuous structure and elevated flow consistency. © The Royal Society of Chemistry 2013.

Development and sensory analysis of shampoo for curly hair

Objective: This study aimed to compare the sensory performance of a shampoo formulation with Polyurethane-14, AMP-acrylates copolymer (PAAC) in relation to control formulation in curly and natural hair tresses. Methods: Curly and natural hair tresses (n = 8) of equal size and weight were pre-treated by washing with a standard shampoo. After the hair tresses were treated with a formulation containing polymer (formulation A) and compared to hair tresses treated with control formulation (Formulation B). Each panelist (n=2) is asked to indicate which tress performs better for each of seven sensory attributes evaluated (quantity and creamy foam, combing, wet touch, frizz formation, curl definition and volume). It was collected images of hair tresses at 0, 1, 2, 4 and 24 hours of washing, comparing the attributes: volume, frizz formation and curl definition. The results were analyzed using table to test of paired assessment, being: SUPERIOR results - 8 and 7 positive evaluations; SIMILAR results - 2 to 6 positive evaluations; INFERIOR results - 1 and 0 positive evaluations. Results: The addition of the PAAC on the shampoo formulation provided definition and modeling of curls, reducing volume and frizz in 24 hours. There was also lower foam formation in the formulation with polymer PAAC. However, it is important to note that this attribute has inversely proportional effect to the creamy foam, since more creamy foam, smaller quantity. Conclusions: It was concluded that the shampoo developed was effective in defining and modeling curl in natural and curly hair.

Efeitos da experiência no andar na organização da passada durante a ultrapassagem sobre obstáculos em bebês

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Seleção de um suporte sintético para imobilizar células do Botryospaheria rhodina e comparação da produção de lacase por células livres e imobilizadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação do escoamento bifásico da mistura óleo-refrigerante através da folga radial de compressores rotativos de pistão rolante

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação computacional do escoamento bifásico com formação de espuma da mistura óleo-refrigerante R134a ao longo de um tubo reto de seção circular constante

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Conteúdo educativo para a televisão digital interativa

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Design & prototipagem: conhecimento e uso da prototipagem rápida no design brasileiro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de cerveja com mel: características físico-químicas, energética e sensorial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Subsídios para análise do ciclo de vida de assentos à base de fibra de coco e látex

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determinação de parâmetros cinéticos de fermentação alcoólica em diferentes substratos

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Reconstrução e geração de malhas em estruturas biomecânicas tridimensionais para análise por elemento finitos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)