动物毒素与人类疾病——从单一成分到组学研究,从理化性质到疾病机理,从粗毒利用到理性药物设计

为了适应环境,很多动物在长期的进化过程中演化出了丰富的毒素及相关分泌物。这些物质中包含了高活性、作用专一的蛋白和多肽。由于它们作用的特异性和专一性,成为蛋白质多肽结构与功能研究的良好模型,也成为研究人类自身生理病理机制的工具和线索,同时也是开发临床诊断试剂和治疗药物的天然宝库。该文综述了中国科学院昆明动物研究所30多年来立足于我国丰富的有毒动物资源,对陆生有毒动物,包括蛇毒、两栖类皮肤分泌物及节肢动物唾液腺分泌物等的主要研究工作,总结了从单一成分到组学研究、从理化性质到人类疾病机理、从粗毒利用到理性药物设计等的发展历程,并对今后的研究提出一些建议。

Malaysian school engages in bullfrog and turtle farming

A brief description is given of the culture methods used in the Sepang Today Aquaculture Centre, a private aquafarming training school in Malaysia, regarding American bullfrog (Rana catesbeiana) and the soft-shelled turtle (Trionyx sinensis). Seed production, grow-out, marketing and future potential are discussed, referring to the school s training brochures for both culture methods.

版纳微型猪染色体显带研究

采用外周血淋巴细胞及肺成纤维细胞培养方法，以及Ｃ带、Ｇ带显带和银染技术，对云南版纳微型猪进行了染色体显带研究。测量了染色体的相对长度、着丝点指数及臂比。结果表明，ＡｇＮＯＲｓ（银染核仁形成区）定位于７号和１０号染色体，版纳微型猪的Ｇ带带型与其它家猪相似，Ｃ带和ＡｇＮＯＲｓ具有多态性。与滇南小耳猪相比较，其Ｃ带基本一致，但ＡｇＮＯＲｓ差异较大

暗纹东方鲀年龄鉴定的研究

用耳石、脊椎骨、鳃盖骨等识别和鉴定暗纹东方鲀(Takifugu obscurusAbe)的年龄,在描述其轮纹特征基础上,比较其在判读暗纹东方鲀年龄和生长特征上的异同与准确性。结果表明,耳石磨片上的轮纹特征明显、清晰且规律性强,是最好的年龄鉴定材料;脊椎骨轮纹也很清晰,但测量时有一定难度,也是较好的年龄鉴定材料;鳃盖骨上年轮较难判定,只能作为辅助材料。本文还对牙齿能否作为年龄鉴定材料进行了观测。

饲养条件下白豚微量元素的积累

中国科学院水生生物研究所留学归国人员基金资助项目(020102); 中国水产科学研究院首席科学家基金资助项目(1-105011)

稻田鱼腥藻返地克隆株的卫星再搭载研究

<正>稻田鱼腥藻(Anabaena oryza HB32)通过90105返回卫星搭载后出现性状分离,其中分离到AoSR16藻株,其固氮酶活力较对照(出发株)成倍提高,其光合和呼吸活性尚未发现明显差异.经2年的地面保持培养后,该藻株的固氮酶活性仍高于对照.1992年10月我们对AoSR16进行了卫星再搭载空间飞行.本文主要报道再搭载后,该藻株的性状分离情况及其再分离单克隆藻株固氮酶活性、生长速率、藻胆蛋白累积和氨排出的变化以及它们间的相互关系,并对固氮酶活性变化的原因及其生理生化效应进行了初步探讨.

Electromagnetic-thermal design optimization of the brushless doubly fed induction generator

In view of its special features, the brushless doubly fed induction generator (BDFIG) shows high potentials to be employed as a variable-speed drive or wind generator. However, the machine suffers from low efficiency and power factor and also high level of noise and vibration due to spatial harmonics. These harmonics arise mainly from rotor winding configuration, slotting effects, and saturation. In this paper, analytical equations are derived for spatial harmonics and their effects on leakage flux, additional loss, noise, and vibration. Using the derived equations and an electromagnetic-thermal model, a simple design procedure is presented, while the design variables are selected based on sensitivity analyses. A multiobjective optimization method using an imperialist competitive algorithm as the solver is established to maximize efficiency, power factor, and power-to-weight ratio, as well as to reduce rotor spatial harmonic distortion and voltage regulation simultaneously. Several constraints on dimensions, magnetic flux densities, temperatures, vibration level, and converter voltage and rating are imposed to ensure feasibility of the designed machine. The results show a significant improvement in the objective function. Finally, the analytical results of the optimized structure are validated using finite-element method and are compared to the experimental results of the D180 frame size prototype BDFIG. © 1982-2012 IEEE.

Influence of AlN buffer layer thickness on the properties of GaN epilayer on Si(111) by MOCVD

The effect of thickness of the high-temperature (HT) AlN buffer layer on the properties of GaN grown on Si(111) has been investigated. Optical microscopy (OM), atomic force microscopy (AFM) and X-ray diffraction (XRD) are employed to characterize these samples grown by metal-organic chemical vapor deposition (MOCVD). The results demonstrate that the morphology and crystalline properties of the GaN epilayer strongly depend on the thickness of HT AlN buffer layer, and the optimized thickness of the HT AlN buffer layer is about 110 nm. Together with the low-temperature (LT) AlN interlayer, high-quality GaN epilayer with low crack density can be obtained. (C) 2008 Elsevier Ltd. All rights reserved.

A 5.6-mW Power Dissipation CMOS Frequency Synthesizer for L1/L2 Dual-Band GPS Application

This paper presents a wide tuning range CMOS frequency synthesizer for dual-band GPS receiver, which has been fabricated in a standard 0.18-um RF CMOS process. With a high Q on-chip inductor, the wide-band VCO shows a tuning range from 2 to 3.6GHz to cover 2.45GHz and 3.14GHz in case of process corner or temperature variation, with a current consumption varying accordingly from 0.8mA to 0.4mA, from a 1.8V supply voltage. The measurement results show that the whole frequency synthesizer costs a very low power consumption of 5.6mW working at L I band with in-band phase noise less than -82dBc/Hz and out-of-band phase noise about -112 dBc/Hz at 1MHz offset from a 3.142GHz carrier.

Evaluation of thermal radiation dependent performance of GaSb thermophotovoltaic cell based on an analytical absorption coefficient model

Applying the model dielectric function method, we have expressed the absorption coefficient of GaSb analytically at room temperature relating to the contribution of various critical points of its electronic band structure. The calculated absorption spectrum shows good agreement with the reported experimental data obtained by spectral ellipsometry on nominally undoped sample. Based on this analytical absorption spectrum, we have qualitatively evaluated the response of active absorbing layer structure and its photoelectric conversion properties of GaSb thermophotovoltaic device on the perturbation of external thermal radiation induced by the varying radiator temperature or emissivity. Our calculation has demonstrated that desirable thickness to achieve the maximum conversion efficiency should be decreased with the increment of radiator temperature and the performance degradation brought by any structure deviation from its optimal one would be stronger meanwhile. For the popular radiator temperature, no more than 1500 K in a real solar thermophotovoltaic system, and typical doping profile in GaSb cell, a reasonable absorbing layer structure parameter should be controlled within 100-300 nm for the emitter while 3000-5000 nm for the base.

基于Venn图的层次信息可视化

为解决具有层次结构的大量信息的可视化问题,文中给出了用嵌套圆表达树型结构信息的可视化方法,即用相切的圆表示兄弟节点,嵌套的圆表示父子节点,圆的位置、大小和颜色分别表示树节点的不同属性信息.同层的兄弟节点并排排列,圆的排列算法快速、稳定、紧密且不相互重叠,排列圆的个数与时间呈线性关系,该排列算法适于大量信息的可视化,既能快速显示大数据集的整体视图,又方便查看细节信息;既能清楚地表达复杂信息间的层次关系,又能显示树节点的属性.该方法可用于文件系统的可视化,实例表明该方法简单、实用、高效、可靠.