Maternal symptoms of depression are related to observations of controlling feeding practices in mothers of young children

Maternal depression can impair parenting practices and has been linked with less sensitive feeding interactions with children, but existing research is based on self-reports of feeding practices. This study examined relationships between maternal self-reported symptoms of depression with observations of mothers' child feeding practices during a mealtime. Fifty-eight mothers of 3-and 4-year-old children were video recorded eating a standardized lunch. The recording was then coded for instances of maternal controlling feeding practices and maternal vocalizations using the Family Mealtime Coding System. Mothers also provided information on current symptoms of depression and anxiety. Mothers who reported greater symptoms of depression were observed to use more verbal and physical pressure for their child to eat and to offer more incentives or conditions in exchange for their child eating. Mothers also used more vocalizations with their child about food during the observed mealtime when they had greater symptoms of depression. There was no link between symptoms of depression and observations of maternal use of restriction. Symptoms of depression are linked with observations of mothers implementing a more controlling, less sensitive feeding style with their child. Health professionals working with families in which mothers have symptoms of depression may benefit from receiving training about the possible impact of maternal depression on child-feeding practices, and mothers with symptoms of depression may benefit from guidance regarding its potential impact on their child-feeding interactions ©2013 American Psychological Association.

Investigating the role of cholesterol in the formation of non-ionic surfactant based bilayer vesicles:thermal analysis and molecular dynamics

The aim of this research was to investigate the molecular interactions occurring in the formulation of non-ionic surfactant based vesicles composed monopalmitoyl glycerol (MPG), cholesterol (Chol) and dicetyl phosphate (DCP). In the formulation of these vesicles, the thermodynamic attributes and surfactant interactions based on molecular dynamics, Langmuir monolayer studies, differential scanning calorimetry (DSC), hot stage microscopy and thermogravimetric analysis (TGA) were investigated. Initially the melting points of the components individually, and combined at a 5:4:1 MPG:Chol:DCP weight ratio, were investigated; the results show that lower (90 C) than previously reported (120-140 C) temperatures could be adopted to produce molten surfactants for the production of niosomes. This was advantageous for surfactant stability; whilst TGA studies show that the individual components were stable to above 200 C, the 5:4:1 MPG:Chol:DCP mixture show ∼2% surfactant degradation at 140 C, compared to 0.01% was measured at 90 C. Niosomes formed at this lower temperature offered comparable characteristics to vesicles prepared using higher temperatures commonly reported in literature. In the formation of niosome vesicles, cholesterol also played a key role. Langmuir monolayer studies demonstrated that intercalation of cholesterol in the monolayer did not occur in the MPG:Chol:DCP (5:4:1 weight ratio) mixture. This suggests cholesterol may support bilayer assembly, with molecular simulation studies also demonstrating that vesicles cannot be built without the addition of cholesterol, with higher concentrations of cholesterol (5:4:1 vs 5:2:1, MPG:Chol:DCP) decreasing the time required for niosome assembly. © 2013 Elsevier B.V.

An exploratory study of ICT usage in small logistics service providers

Information and communication technology (ICT) developments have strongly affected supply chain management (SCM) in recent years. ICT has had a great impact on all supply chain processes including planning, purchasing, production management, stock management, physical distribution and related integration management. Technology has become an important dimension of third party logistics (3PL) service supply as competitive advantage increasingly depends on the ability to create value for customers through the effective application of ICT. Within this process, while large 3PLs are gaining substantial benefits from technology usage and implementation, the magnitude of changes spurred by ICT dissemination in small logistics service providers remains unclear. This is reflected by the existing gap in literature where the role and competitive developing processes of small 3PLs are seriously underestimated. This gives rise to the need to develop research and investigation in this particular area. The objective of this paper is to narrow the knowledge gap in the field of ICT adoption in small 3PLs through an empirical investigation. It presents the results of a survey on a sample of small Italian 3PLs.

Investigating the role of capacitive coupling between the operating table and the return electrode of an electrosurgery unit in the modification of the current density distribution within the patients’ body

Background: Electrosurgery units are widely employed in modern surgery. Advances in technology have enhanced the safety of these devices, nevertheless, accidental burns are still regularly reported. This study focuses on possible causes of sacral burns as complication of the use of electrosurgery. Burns are caused by local densifications of the current, but the actual pathway of current within patient's body is unknown. Numerical electromagnetic analysis can help in understanding the issue. Methods: To this aim, an accurate heterogeneous model of human body (including seventy-seven different tissues), electrosurgery electrodes, operating table and mattress was build to resemble a typical surgery condition. The patient lays supine on the mattress with the active electrode placed onto the thorax and the return electrode on his back. Common operating frequencies of electrosurgery units were considered. Finite Difference Time Domain electromagnetic analysis was carried out to compute the spatial distribution of current density within the patient's body. A differential analysis by changing the electrical properties of the operating table from a conductor to an insulator was also performed. Results: Results revealed that distributed capacitive coupling between patient body and the conductive operating table offers an alternative path to the electrosurgery current. The patient's anatomy, the positioning and the different electromagnetic properties of tissues promote a densification of the current at the head and sacral region. In particular, high values of current density were located behind the sacral bone and beneath the skin. This did not occur in the case of non-conductive operating table. Conclusion: Results of the simulation highlight the role played from capacitive couplings between the return electrode and the conductive operating table. The concentration of current density may result in an undesired rise in temperature, originating burns in body region far from the electrodes. This outcome is concordant with the type of surgery-related sacral burns reported in literature. Such burns cannot be immediately detected after surgery, but appear later and can be confused with bedsores. In addition, the dosimetric analysis suggests that reducing the capacity coupling between the return electrode and the operating table can decrease or avoid this problem. © 2013 Bifulco et al.; licensee BioMed Central Ltd.

Fast Information Retrieval in the Open Grid Service Architecture

This is an extended version of an article presented at the Second International Conference on Software, Services and Semantic Technologies, Sofia, Bulgaria, 11–12 September 2010.

Revisiting the lean agile paradigm:an empirical study in the aerospace industry

Much has been written about the potential impact of Lean Agile paradigm on firm's supply chain performance. However, most of the existing studies mainly pointed out Lean is for cost reduction, whereas Agility is for attaining flexibility. There are little empirical studies in literature that examined how Lean Agile paradigm impacts on supply chain performance. This paper aims to address this gap by studying the influence of Lean and Agility paradigms on a single commodity supply chain delivery performance in the aerospace industry. Data was collected from four separate 'Rigid pipes' supply chains to study how manufacturing alignment impacts on the delivery performance. Implications of the study to practitioners and academia are discussed and future research outlined.

Fenntartható fejlődés = Sustainability issues in purchasing and supply management

A fenntarthatóság kérdését a vállalati működésben számos kutatás elemzi. A vizsgálatokat azonban érdemes kiterjeszteni a vállalatokat beszállítóikkal összekötő kapcsolatrendszerre és az annak menedzseléséért felelős beszerzésre is, hiszen a nagy vállalatok beszerzési döntései jelentős értékükön keresztül fontos motiváló erőt jelentenek a beszállító vállalatok egy sokkal szélesebb hálózata számára. Tanulmányunk célja áttekinteni a fenntarthatóság három pillérjének beszerzési értelmezésének lehetőségeit, ehhez kapcsolódva bemutatni azokat a motivációs tényezőket, amelyek biztosíthatják azt, hogy a beszerzés a gyakorlatban is kezelni tudja a fenntarthatóság szempontjait. A bemutatott eredmények az irodalom feltérképezésén alapszanak, és egy olyan kutatás részét képezik, melynek során vállalati beszerzési szakembereket kérdezünk a fenntartható beszerzéssel kapcsolatos vállalati gyakorlatról és tapasztalataikról. A kutatás a Budapesti Corvinus Egyetemen folyó „Versenyben a világgal” kutatási program keretében készült. = Sustainability issues in literature are getting more and more attention. In this study the focus is extended to purchasing and supplier relationships as companies influence their supply base by the priorities of their sourcing decision. This paper addresses sustainability in purchasing in a comprehensive way including green, social responsibility and corporate growth issues. The results of a research project which aims to reveal and structure the meaning of sustainable purchasing and the motivating forces leading companies to make efforts in purchasing for sustainability and means applied to attain achievements at some fields of sustainability. After presenting the results of literature review, some theory development was done to create a framework in which it is possible to describe the sustainability means applied and the motivating force behind. This framework serves as a basis of an empirical investigation among Hungarian companies. The empirical results validated the theoretical framework: the number and the characteristics of sustainability activities were determined by the type of motivation (to avoid negative effects, compliance to expectations, to attain positive effects). Our research project was part of the research project “In Global Competition”.

The impact of family forms on interpersonal influence between single parent and full families

The relationship between individual thoughts and the social environment has been widely studied in sociology (Weber, 1968), psychology (Lewin, 1951) and social psychology. The influence of reference groups on individual behaviour is often manifested in the decisions made by consumers while members of these reference groups are often the individual’s friends and acquaintances. Their decisions, their values and norms serve as an example for the individual. In this study the influences of reference groups are examined within the context of the family form in Hungary. The paper focuses on the nature of peer influence in single parent households and full families, to analyse the normative and informational dimensions of peer pressure and communication patterns within the family.

Fenntarthatósági szempontok beépítése a beszállító értékelésébe a DEA/CI összetett indikátorok módszere alkalmazásával (Integrating sustainability criteria in supplier evaluation with application of the method of of DEA/CI complex indicators)

A környezeti hatások rendszerint túlmutatnak egy vállalat határain, éppen ezért az ellátási lánc kontextusban a környezeti szempontok érvényesítése során fontos szerep jut a beszerzési döntéseknek is. Számos olyan példát lehetne említeni, amikor egy adott szempont szerint egy alternatíva környezetileg előnyös, de az ellátási lánc egészét nézve már környezetterhelő. A környezeti hatások ellátási lánc szinten való mérése azonban komoly kihívásokat jelent. Ezzel jelentős kutatásokat és fejlesztéseket inspirált a téma. Az egyik olyan terület, amelyben komoly kutatási eredmények születtek, az a környezeti szempontok beszállítói értékelésbe való beépítése. A kutatások ezen irányához csatlakozva a szerzők tanulmányunkban azt keresik, hogyan lehet meghatározni az egyik legáltalánosabban használt szállítóértékelési módszerben, a súlyozott pontrendszerben egy adott szemponthoz azt a súlyt, amely mellett az adott szempont már döntésbefolyásoló tényezővé válik. Ehhez a DEA (Data Envelopment Analysis) összetett indikátorok (Composite Indicators, CI) módszerét alkalmazzák. A szempontok közös súlyának fontossága megállapításához a lineáris programozás elméletét használják. _____ Management decisions often have an environmental effect not just within the company, but outside as well, this is why supply chain context is highlighted in literature. Measuring environmental issues of supply decisions raise a lot of problems from methodological and practical point of view. This inspires a rapidly growing literature as a lot of studies were published focusing on how to incorporate environmental issues into supplier evaluation. This paper contributes to this stream of research as it develops a method to help weight selection. In the authors’ paper the method of Data Envelope Analysis (DEA) is used to study the extension of traditional supplier selection methods with environmental factors. The selection of the weight system can control the result of the selection process.