Comparing and validating hypothesis test procedures: Graphical and numerical tools

When the behaviour of a specific hypothesis test statistic is studied by aMonte Carlo experiment, the usual way to describe its quality is by givingthe empirical level of the test. As an alternative to this procedure, we usethe empirical distribution of the obtained \emph{p-}values and exploit itsinformation both graphically and numerically.

Temporal Geobiotic Mapping: a conceptual mapping technique toward visualising geobiotic areas in cross-section

Geobiota are defined by taxic assemblages (i.e., biota) and their defining abiotic breaks, which are mapped in cross-section to reveal past and future biotic boundaries. We term this conceptual approach Temporal Geobiotic Mapping (TGM) and offer it as a conceptual approach for biogeography. TGM is based on geological cross-sectioning, which creates maps based on the distribution of biota and known abiotic factors that drive their distribution, such as climate, topography, soil chemistry and underlying geology. However, the availability of abiotic data is limited for many areas. Unlike other approaches, TGM can be used when there is minimal data available. In order to demonstrate TGM, we use the well-known area in the Blue Mountains, New South Wales (NSW), south-eastern Australia and show how surface processes such as weathering and erosion affect the future distribution of a Moist Basalt Forest taxic assemblage. Biotic areas are best represented visually as maps, which can show transgressions and regressions of biota and abiota over time. Using such maps, a biogeographer can directly compare animal and plant distributions with features in the abiotic environment and may identify significant geographical barriers or pathways that explain biotic distributions.

Laparoscopic inguinal hernia repair with extraperitoneal double-mesh technique.

Totally extraperitoneal laparoscopic hernia repair is an efficient but technically demanding procedure. As mechanisms of hernia recurrence may be related to these technical difficulties, we have modified a previously described double-mesh technique in an effort to simplify the procedure. Extraperitoneal laparoscopic hernia repairs were performed in 82 male and 17 female patients having inguinal, femoral, and recurrent bilateral hernias. A standard propylene mesh measuring 15 x 15 cm was cut into two pieces of 4 x 15 cm and 11 x 15 cm. The smaller mesh was placed over both inguinal rings without splitting. The larger mesh was then inserted over the first mesh and stapled to low-risk zones, reinforcing the large-vessel area and the nerve transition zone. The mean procedure duration was 60 minutes for unilateral and 100 minutes for bilateral hernia repair. Patients were discharged from the hospital within 48 hours. The mean postoperative follow-up was 22 months, with no recurrences, neuralgia, or bleeding complications. Over a 2-year period, this technique was found to be satisfactory without recurrences or significant complications. In our hands, this technique was easier to perform: it allows for a less than perfect positioning of the meshes and avoids most of the stapling to crucial zones.

Efficiency of the induced mating technique for Toxorhynchites theobaldi (Diptera, Culicidae)

Toxorhynchites mosquitoes play important ecological roles in aquatic microenvironments, and are frequently investigated as potential biological control agents of mosquito disease vectors. Establishment of Toxorhynchites laboratory colonies can be challenging because for some species, mating and insemination either do not occur or require a prohibitive amount of laboratory space for success. Consequently, artificial insemination techniques have been developed to assist with mass rearing of these species. Herein we describe an adapted protocol for colony establishment of T. theobaldi, a species with broad distribution in the Neotropics. The success of the technique and its implications are discussed.

Lean IT Application of 5S/6S Technique in a SME

O Lean não é apenas uma prática. É uma revolução nas Tecnologias de Informação (TI) proporcionando uma maior e melhor utilização dos recursos e procurando alcançar custos mais baixos dos que existem atualmente. É muito mais do que uma lista de ferramentas e metodologias e para que seja estabelecido é necessário mudar comportamentos culturais e incentivar todas as organizações a pensarem de forma diferente sobre o poder da informação versus o valor do negócio. Normalmente associa-se o Lean à criação de valor para a organização. Mas o valor é significativo quando é trazido com eficiência e resultando na eliminação de processos que consomem tempo, recursos e espaço desnecessário. Os princípios Lean podem ajudar as organizações na melhoria da qualidade, redução de custos e no alcance da eficiência através de uma melhor produtividade. Existem vários conceitos Lean que podem ser associados a diferentes objetivos de resolução de problemas. Em particular, este trabalho é uma dissertação programada para analisar um novo paradigma sobre o Lean que surgiu recentemente - Lean para Tecnologias de Informação (Lean IT). Esta dissertação apresenta uma abordagem para o Lean IT (enquadramento, objetivos e metodologia) para realizar o trabalho e utiliza um único estudo de caso, com abordagem à técnica 5S/6S (até o terceiro nível de avaliação), numa Pequena, Média Empresa (PME), de forma a demonstrar a agregação de valor e as vantagens na eliminação de resíduos/desperdícios nos seus processos. A técnica também mostra a evolução da avaliação antes e depois da sua aplicação. Este estudo de caso individual avalia um Departamento de TI (com uma equipe de cinco colaboradores e um chefe de Departamento) através da observação direta, documentação e arquivos de registos e os equipamentos analisados são computadores, postos de trabalho e projetos (código desenvolvido, portais e outros serviços de TI). x Como guia, a metodologia inclui a preparação da avaliação em conjunto com o responsável/chefe do Departamento de TI, o desenrolar das operações, a identificação do fluxo de valor para cada atividade, o desenvolvimento de um plano de comunicação e a análise de cada passo da avaliação do fluxo de processamento. Os principais resultados estão refletidos nas novas ferramentas de trabalho (Microsoft SharePoint e Microsoft Project em detrimento do Microsoft Excel) que fornecem comunicação remota e controlo de projetos para todos os stakeholders, tais como, a gestão de topo, parceiros e clientes (algumas organizações incluem o Outsourcing no desenvolvimento de funcionalidades específicas). Os resultados também refletem-se na qualidade do trabalho, no cumprimento de prazos, na segurança física e lógica, na motivação dos colaboradores e na satisfação dos clientes. A técnica 5S/6S ajuda a esclarecer os conceitos e princípios Lean, exequibilidade e aumenta a curiosidade sobre a implementação da técnica noutros departamentos tais como o Financeiro e ou o de Recursos Humanos. Como forma de consolidação do trabalho tornou-se possível organizar a avaliação para que a organização possa candidatar-se a uma certificação na norma ISO/IEC 25010:2011, no modelo de qualidade de software (software é o core business desta PME). Mas tal só será possível se toda a organização atingir a padronização dos seus processos. Este estudo de caso mostra que os conceitos Lean e a aplicação de uma ou mais das suas técnicas (neste caso particular a técnica 5S/6S) ajuda a obter melhores resultados através da gestão e melhoria dos seus principais serviços.

Satisfaction maternelle de la prise en charge anesthésique durant l'accouchement: une étude de cohorte rétrospective. [Risk factors associated with maternal satisfaction during childbirth: a retrospective cohort study.]

PURPOSE: Factors associated with maternal satisfaction of anesthetic management during labour and delivery are poorly known. The purpose of this study was to assess these factors. METHODS: We performed a retrospective cohort study on parturients admitted between January 2004 and December 2008. Data on patients' demographics, comorbidities, procedures performed and various aspects of their anesthetic experience were retrieved from the anesthetic records. Maternal satisfaction was measured using a numerical scale from 0 to 10 (0 = not satisfied at all, 10 = very satisfied). A cutoff of ≤ 6 was taken as poor satisfaction. We performed a multivariate analysis to identify the different predictors of maternal satisfaction and more specifically those related to pain, overall experience with the technique, delays, and presence of anesthetic, obstetrical and neonatal complications. RESULTS: There were 15,386 parturients admitted during the study period. Of these, 10,034 had complete information in the chart and 761 (7.6%) parturients were dissatisfied with their anesthetic care. Factors decreasing patient satisfaction were high risk pregnancy [odds ratio (OR) 95% confidence interval (CI) 0.59 (0.34-1.02)] and difficult delivery [OR (95% CI) 0.62 (0.52-0.74)]. Pain, a negative experience of the procedure, delays, poor coordination in management, and the presence of complications decreased patient satisfaction [OR (95% CI) 0.07 to 0.71]; P < 0.001. CONCLUSION: Maternal satisfaction with anesthesia care is largely determined by the effectiveness and correct performance of the procedure carried from the technical and human point of view. However, other factors such as a good coordination in patient management and the absence of complications also influence maternal satisfaction.

1st radiometric dating of a paleontologically dated Bathonian level from Georgia (USSR) - Use of the cathodoluminescence for selection of suitable plagioclases

Jurassic volcanic formations interlayered with (ammonite-bearing) sediments are common in the Caucasus area; this situation is of interest for the numerical calibration of the poorly documented Jurassic portion of the time scale. However, following petrographic study on thin sections no whole-rocks can be considered reliable geochronometers due to subsequent alteration; from about 20 samples, two were selected for plagioclase dating; one (V134) is probably early Kimmeridgian in age; the other (V136) is probably located in the Lower Bathonian stage according to diagnostic ammonites. Cathodoluminescence (CTL) study has shown that sample V136 was similar to usual volcanic feldspars (blue to green colour); however, the lack of CTL of the V134 plagioclase is a character common to diagenetic feldspars; consequently, in spite of a good optical preservation, this geo-chronometer cannot give an age representative of the time of emplacement of the lava flow. We have combined CTL observation with microprobe analysis in order to document the poorly known CTL behaviour of volcanic feldspars; cations Ti4+ and Fe2+ play a major role in the CTL colour of plagioclases and are able to document the growing history of these feldspars ; phenocrysts are initially rich in Fe2+ (core of the crystals, green in colour), then richer in Ti toward the exterior; microcrysts are even richer in Ti (blue to bright blue). We have also observed that natural CTL colour was modified resulting from acid ``cleaning'' of the separated feldspars : the initial blue or green colour tends to change to yellow or violet, respectively, after acid treatment probably due to oxydation of Fe2+ toward Fe3+. X-ray and microprobe analyses both indicated that plagioclases from sample V134 was near the sodic end member (albite) suggesting a diagenetic origin in this andesitic basalt; In contrast, sample V136 contains a calcic plagioclase of common composition for a doleritic basalt. The K-Ar conventional technique was applied as a preliminary tool for radiometric analysis. The Kimmeridgian Na-plagioclase sample gave a ``rejuvenated'' (85 Ma) apparent age which confirms a late genesis for the separated plagioclase phase; this interpretation is based on CTL observation, X-ray analysis, and microprobe analysis ; these techniques are able to distinguish samples which have been submitted to diagenetic alteration from those which have not. An age consistent with the stratigraphic location has been obtained from sample V136. This age of 161 +/- 3 (2-sigma) Ma, is the first one available from a sample palaeontologically located with reasonable precision within the mid Jurassic time.

Steady-state equilibrium phase inversion recovery ON-resonant water suppression (IRON) MR angiography in conjunction with superparamagnetic nanoparticles. A robust technique for imaging within a wide range of contrast agent dosages.

PURPOSE: To investigate the ability of inversion recovery ON-resonant water suppression (IRON) in conjunction with P904 (superparamagnetic nanoparticles which consisting of a maghemite core coated with a low-molecular-weight amino-alcohol derivative of glucose) to perform steady-state equilibrium phase MR angiography (MRA) over a wide dose range. MATERIALS AND METHODS: Experiments were approved by the institutional animal care committee. Rabbits (n = 12) were imaged at baseline and serially after the administration of 10 incremental dosages of 0.57-5.7 mgFe/Kg P904. Conventional T1-weighted and IRON MRA were obtained on a clinical 1.5 Tesla (T) scanner to image the thoracic and abdominal aorta, and peripheral vessels. Contrast-to-noise ratios (CNR) and vessel sharpness were quantified. RESULTS: Using IRON MRA, CNR and vessel sharpness progressively increased with incremental dosages of the contrast agent P904, exhibiting constantly higher contrast values than T1 -weighted MRA over a very wide range of contrast agent doses (CNR of 18.8 ± 5.6 for IRON versus 11.1 ± 2.8 for T1 -weighted MRA at 1.71 mgFe/kg, P = 0.02 and 19.8 ± 5.9 for IRON versus -0.8 ± 1.4 for T1-weighted MRA at 3.99 mgFe/kg, P = 0.0002). Similar results were obtained for vessel sharpness in peripheral vessels, (Vessel sharpness of 46.76 ± 6.48% for IRON versus 33.20 ± 3.53% for T1-weighted MRA at 1.71 mgFe/Kg, P = 0.002, and of 48.66 ± 5.50% for IRON versus 19.00 ± 7.41% for T1-weighted MRA at 3.99 mgFe/Kg, P = 0.003). CONCLUSION: Our study suggests that quantitative CNR and vessel sharpness after the injection of P904 are consistently higher for IRON MRA when compared with conventional T1-weighted MRA. These findings apply for a wide range of contrast agent dosages.

A noninvasive method for measuring the velocity of diffuse hydrothermal flow by tracking moving refractive index anomalies

Diffuse flow velocimetry (DFV) is introduced as a new, noninvasive, optical technique for measuring the velocity of diffuse hydrothermal flow. The technique uses images of a motionless, random medium (e.g.,rocks) obtained through the lens of a moving refraction index anomaly (e.g., a hot upwelling). The method works in two stages. First, the changes in apparent background deformation are calculated using particle image velocimetry (PIV). The deformation vectors are determined by a cross correlation of pixel intensities across consecutive images. Second, the 2-D velocity field is calculated by cross correlating the deformation vectors between consecutive PIV calculations. The accuracy of the method is tested with laboratory and numerical experiments of a laminar, axisymmetric plume in fluids with both constant and temperaturedependent viscosity. Results show that average RMS errors are ∼5%–7% and are most accurate in regions of pervasive apparent background deformation which is commonly encountered in regions of diffuse hydrothermal flow. The method is applied to a 25 s video sequence of diffuse flow from a small fracture captured during the Bathyluck’09 cruise to the Lucky Strike hydrothermal field (September 2009). The velocities of the ∼10°C–15°C effluent reach ∼5.5 cm/s, in strong agreement with previous measurements of diffuse flow. DFV is found to be most accurate for approximately 2‐D flows where background objects have a small spatial scale, such as sand or gravel

Numerical simulation of ambient seismic wavefield modification caused by pore-fluid effects in an oil reservoir

We have modeled numerically the seismic response of a poroelastic inclusion with properties applicable to an oil reservoir that interacts with an ambient wavefield. The model includes wave-induced fluid flow caused by pressure differences between mesoscopic-scale (i.e., in the order of centimeters to meters) heterogeneities. We used a viscoelastic approximation on the macroscopic scale to implement the attenuation and dispersion resulting from this mesoscopic-scale theory in numerical simulations of wave propagation on the kilometer scale. This upscaling method includes finite-element modeling of wave-induced fluid flow to determine effective seismic properties of the poroelastic media, such as attenuation of P- and S-waves. The fitted, equivalent, viscoelastic behavior is implemented in finite-difference wave propagation simulations. With this two-stage process, we model numerically the quasi-poroelastic wave-propagation on the kilometer scale and study the impact of fluid properties and fluid saturation on the modeled seismic amplitudes. In particular, we addressed the question of whether poroelastic effects within an oil reservoir may be a plausible explanation for low-frequency ambient wavefield modifications observed at oil fields in recent years. Our results indicate that ambient wavefield modification is expected to occur for oil reservoirs exhibiting high attenuation. Whether or not such modifications can be detected in surface recordings, however, will depend on acquisition design and noise mitigation processing as well as site-specific conditions, such as the geologic complexity of the subsurface, the nature of the ambient wavefield, and the amount of surface noise.

A numerical characterization of hypersurface singularities

In this note we give a numerical characterization of hypersurface singularities in terms of the normalized Hilbert-Samuel coefficients, and we interpret this result from the point of view of rigid polynomials.

A numerical model for the gamma-ray emission of the microquasar LS 5039

The possible association between the microquasar LS 5039 and the EGRET source 3EG J1824-1514 suggests that microquasars could also be sources of high energy gamma-rays. In this paper, we explore, with a detailed numerical model, if this system can produce the emission detected by EGRET (>100 MeV) through inverse Compton (IC) scattering. Our numerical approach considers a population of relativistic electrons entrained in a cylindrical inhomogeneous jet, interacting with both the radiation and the magnetic fields, taking into account the Thomson and Klein-Nishina regimes of interaction. The computed spectrum reproduces the observed spectral characteristics at very high energy.