Pesca exploratoria y experimental con red de cerco artesanal en la Región Tumbes.2005

Se evaluó la utilización de la malla de 50 mm (2”) en redes de cerco artesanal de la Región Tumbes en una pesquería multiespecífica. Se trabajó con una red control de tamaño de malla de 38 mm (1,5”) y la red experimental de 50 mm (2,0”), con un porcentaje de embande de 0,65 y 0,77, respectivamente. Se determinó diferencia entre las curvas de profundidad de calado del cuerpo central de las redes (tc= 46,670, t*= 1,98, p= 0) la red experimental tuvo mayor profundidad de velado; entre las curvas de velocidad de caída del cuerpo central de las redes, hubo diferencia significativa (tc= 7,790, t*= 1,98, p = 0,000), debido al mayor lastre y filtrado de las mallas de la red experimental. El coeficiente abertura horizontal (μ1) de las mallas en la franja superior durante el máximo velado de la red y el gareteo fue en las mallas del cabecero o copo, parte central y ultimo cuerpo de la red, en promedio 0,71; 0,74 y 0,73 respectivamente; (valores cercanos al coeficiente de armado ideal para el escape de ciertos peces fusiformes). El promedio de μ1 obtenidos en la región de las mallas centrales en el cabecero, centro y ultimo cuerpo de la red fue 0,85; 0,85 y 0,84 respectivamente; lo que indicó una mayor abertura horizontal de las mallas por encima del valor del coeficiente de armado que no permitiría el escape de los peces. Se concluyó que por la condición de las mallas de la red de cerco experimental (tamaño de malla 50 mm) no es óptima para gran parte de la estructura de la red, esto no permitiría la selectividad por tamaños.

Caracterización de redes de cerco artesanal para anchoveta destinada al consumo humano directo

Las características principales de las redes de cerco artesanales anchoveteras para CHD (PS 01.1.0 “ISSCFG”), utilizan tamaños de malla en el copo y cuerpo de ½” ~ 13 mm de material nylon Poliamida (PA). Se encontró una diferencia en las dimensiones, el material y diámetro del hilo del paño usado, entre las redes de las ANC-CHD tradicionales (Paita, Chimbote, Callao e Ilo) que utilizan paños anchoveteros de R310tex, R381tex R462tex, con longitud de relinga superior (LRS) de 183-366 m (100 a 200 bz), altura de paño estirado (AHE) de 27 a 64 m (15 a 35 bz); y las redes de cerco ANC-Pisco que utilizan paños anchoveteros de R155tex y R230tex, con LRS de 270 a 396 m (145 a 215 bz) y AHE de 30 m (16 bz). Del análisis regresional experimental, las principales características de la red (LRS, AHE), y la embarcación–capacidad de bodega-(CBOD) presentaron correlaciones significativas para la flota ANC-Tradicional (r = 0,86 y 0,91), mientras que en la flota ANC-Pisco las correlación de la función CBODLRS fue de 0,30 y la AHE fue constante (30 m) para todo el rango de LRS (270 - 396 m).

An architecture for adaptive replication-based multimedia streaming in P2P networks

This PhD thesis addresses the issue of scalable media streaming in large-scale networking environments. Multimedia streaming is one of the largest sink of network resources and this trend is still growing as testified by the success of services like Skype, Netflix, Spotify and Popcorn Time (BitTorrent-based). In traditional client-server solutions, when the number of consumers increases, the server becomes the bottleneck. To overcome this problem, the Content-Delivery Network (CDN) model was invented. In CDN model, the server copies the media content to some CDN servers, which are located in different strategic locations on the network. However, they require heavy infrastructure investment around the world, which is too expensive. Peer-to-peer (P2P) solutions are another way to achieve the same result. These solutions are naturally scalable, since each peer can act as both a receiver and a forwarder. Most of the proposed streaming solutions in P2P networks focus on routing scenarios to achieve scalability. However, these solutions cannot work properly in video-on-demand (VoD) streaming, when resources of the media server are not sufficient. Replication is a solution that can be used in these situations. This thesis specifically provides a family of replication-based media streaming protocols, which are scalable, efficient and reliable in P2P networks. First, it provides SCALESTREAM, a replication-based streaming protocol that adaptively replicates media content in different peers to increase the number of consumers that can be served in parallel. The adaptiveness aspect of this solution relies on the fact that it takes into account different constraints like bandwidth capacity of peers to decide when to add or remove replicas. SCALESTREAM routes media blocks to consumers over a tree topology, assuming a reliable network composed of homogenous peers in terms of bandwidth. Second, this thesis proposes RESTREAM, an extended version of SCALESTREAM that addresses the issues raised by unreliable networks composed of heterogeneous peers. Third, this thesis proposes EAGLEMACAW, a multiple-tree replication streaming protocol in which two distinct trees, named EAGLETREE and MACAWTREE, are built in a decentralized manner on top of an underlying mesh network. These two trees collaborate to serve consumers in an efficient and reliable manner. The EAGLETREE is in charge of improving efficiency, while the MACAWTREE guarantees reliability. Finally, this thesis provides TURBOSTREAM, a hybrid replication-based streaming protocol in which a tree overlay is built on top of a mesh overlay network. Both these overlays cover all peers of the system and collaborate to improve efficiency and low-latency in streaming media to consumers. This protocol is implemented and tested in a real networking environment using PlanetLab Europe testbed composed of peers distributed in different places in Europe.

Composição da solução de um solo alagado conforme a profundidade e o tempo de alagamento, utilizando novo método de coleta

Na coleta da solução de solos alagados, é importante evitar o contato do oxigênio com a solução para prevenir reações redox que podem modificar sua composição química. Neste trabalho, realizado em casa de vegetação, foram feitos estudos sobre o estado de oxirredução e sobre a composição química de um Planossolo, em diferentes profundidades e tempos de alagamento, visando propor um novo método para a coleta da solução de solos alagados. O estudo foi feito em vasos plásticos com 7 kg de material de solo proveniente da camada superficial (0-20 cm), num delineamento inteiramente casualizado, com três repetições. O dispositivo de coleta da solução do solo consistiu de um tubo de polietileno com 70 cm de comprimento e 0,6 cm de diâmetro interno, com duas fileiras de orifícios de 1 mm de diâmetro, recoberto com tela de nylon de 400 mesh, construído na forma de espiral e acomodado nas profundidades de 2, 5 e 10 cm. A este dispositivo foi acoplado um sifão de vidro para a coleta da solução. Após a instalação do sistema coletor, o solo foi mantido alagado por 109 dias, tendo sido feitas coletas semanais da solução nas três profundidades. Foram analisados os valores de Eh e pH e os teores de Mn2+, Fe2+, Ca2+, Mg2+ e K+ na solução. As condições de oxirredução e os teores de cátions na solução nas diferentes profundidades, durante o período em que o solo se manteve alagado, permitiram concluir que o método utilizado pode ser indicado para coleta da solução de solos alagados, embora haja necessidade de estudos mais aprofundados sobre o assunto.

Diagnostic Performances of 18F-FDG Positron Emission Tomography in Large Vessels Vasculitis: Meta-analysis

Toperform a meta-analysis of FDG-PET performances in the diagnosis of largevessels vasculitis (Giant Cell Arteritis (GCA) associated or not withPolymyalgia Rheumatica(PMR), Takayasu). Materials and methods : The MEDLINE,Cochrane Library, Embase were searched for relevant original articlesdescribing FDG-PET for vasculitis assessment, using MesH terms ("GiantCell Arteritis or Vasculitis" AND "PET"). Criteria for inclusionwere:(1)FDG-PET for diagnosis of vasculitis(2)American College of Rheumatologycriteria as reference standard(3)control group. After data extraction, analyseswere performed using a random-effects model. Results : Of 184 citations(database search and references screening),70 articles were reviewed of which12 eligible studies were extracted (sensitivity range from 32% to 97%). 7studies fulfilled all inclusion criteria. Owing to overlapping population, 1study was excluded. Statistical heterogeneity justified the random-effectsmodel. Pooled 6 studies analysis(116 vasculitis,224 controls) showed a 81%sensitivity (95%CI:70-89%);a 89% specificity (95%CI:77-95%);a 85%PPV(95%CI:63-95%); a 90% NPV(95%CI:79-95%);a 7.1 positive LR(95%CI:3.4-14.9); a0.2 negative LR(95%CI:0.14-0.35) and 90.1 DOR(95%CI: 18.6-437). Conclusion :FDG-PET has good diagnostic performances in the detection of large vesselsvasculitis. Its promising role could be extended to follow up patients undertreatment, but further studies are needed to confirm this possibility.

A pseudo-spectral method for simulating of poro-elastic seismic wave propagation in complex borehole environments

We present a novel numerical approach for the comprehensive, flexible, and accurate simulation of poro-elastic wave propagation in cylindrical coordinates. An important application of this method is the modeling of complex seismic wave phenomena in fluid-filled boreholes, which represents a major, and as of yet largely unresolved, computational problem in exploration geophysics. In view of this, we consider a numerical mesh consisting of three concentric domains representing the borehole fluid in the center, the borehole casing and the surrounding porous formation. The spatial discretization is based on a Chebyshev expansion in the radial direction, Fourier expansions in the other directions, and a Runge-Kutta integration scheme for the time evolution. A domain decomposition method based on the method of characteristics is used to match the boundary conditions at the fluid/porous-solid and porous-solid/porous-solid interfaces. The viability and accuracy of the proposed method has been tested and verified in 2D polar coordinates through comparisons with analytical solutions as well as with the results obtained with a corresponding, previously published, and independently benchmarked solution for 2D Cartesian coordinates. The proposed numerical solution also satisfies the reciprocity theorem, which indicates that the inherent singularity associated with the origin of the polar coordinate system is handled adequately.

Is cannabis use a significant exposition to nicotine?

Purpose: Young cannabis users are at increased risk for cigarette initiation and later progression to nicotine dependence. The present study assesses to which extent cannabis users are exposed to nicotine through mulling, a widespread process consisting of mixing tobacco to cannabis for its consumption. Methods: Data are issued from an ongoing observational study taking place in Switzerland. A total of 267 eligible participants (mean age 19 years, 46.4% males) completed an anonymous self-administered questionnaire on their tobacco and cannabis intake in the previous 5 days. They also provided a urine sample that was blindly analyzed for cotinine (a key metabolite of nicotine) using liquid-chromatography coupled mass-spectrometry. After the exclusion of cannabis users not having smoked at least one joint/blunt in which tobacco had been mixed (n _ 2), and participants reporting other sources of nicotine exposition than cigarettes or mulling (n _37), four groups were created: cannabis and cigarette abstainers (ABS, n_ 69), cannabis only smokers (CAS; n _ 33), cigarette only smokers (CIS; n _ 62); and cannabis and cigarette smokers (CCS, n _ 64). Cotinine measures of CAS were compared to those of ABS, CIS and CCS. All comparisons were performed using ANCOVA, controlling for age, gender, ethnicity, BMI and environmental exposure to cigarette smoke in the past month (at home, in school/at work, in social settings). The number of mixed joints/blunts smoked in the previous 5 days was additionally taken into account when comparing CAS to CCS. Cotinine values (ng/ml) are reported as means with 95% confidence interval (95% CI). Results: In the previous 5 days, CAS had smoked on average 10 mixed joints/blunts, CIS 30 cigarettes, and CCS 8 mixed joints/ blunts and 41 cigarettes. Cotinine levels of participants considerably differed between groups. The lowest measure was found among ABS (3.2 [0.5-5.9]), followed in growing order by CAS (294.6 [157.1-432.0]), CIS (362.8 [258.4-467.3]), and CCS (649.9 [500.7-799.2]). In the multivariate analysis, cotinine levels of CAS were significantly higher than those of ABS (p _.001), lower than those of CCS (p _ .003), but did not differ from levels of CIS (p _ .384). Conclusions: Our study reveals cannabis users to be significantly exposed to nicotine through mulling, even after controlling for several possible confounders such as environmental exposure to cigarette smoke. Utmost, mixing tobacco to Poster cannabis can result in a substantial nicotine exposition as cotinine levels from cannabis only smokers were as high as those of moderate cigarette smokers. Our findings also suggest that mulling is adding up to the already important nicotine exposition of cigarettes smokers. Because of the addictiveness of nicotine, mulling should be part of a comprehensive assessment of substance use among adolescents and young adults, especially when supporting their cannabis and cigarette quitting attempts. Sources of Support: This study was funded by the Public Health Service of the Canton de Vaud. Dr. BÊlanger's contribution was possible through grants from the Royal College of Physicians and Surgeons of Canada, the CHUQ/CMDP Foundation and the Laval University McLaughlin program, QuÊbec, Canada.

Bilateral extraperitoneal uterosacral vaginal vault suspension: a 2-year follow-up longitudinal case series of 123 patients.

INTRODUCTION AND HYPOTHESIS: The objective of this study is to assess anatomical and functional results of the extraperitoneal uterosacral ligament suspension (USL) in women with post-hysterectomy vaginal vault prolapse. METHODS: One hundred and twenty-three consecutive women were included. Concurrent procedures were anterior colporraphy with fascial repair (20%) and mesh reinforcement (49%), posterior colporraphy with fascial repair (38%) and mesh reinforcement (56%) and a sling procedure (29%). Women were assessed using Baden and Walker and pelvic organ prolapse quantification classification pre- and post-operatively. RESULTS: One hundred and ten patients (89%) were available for follow-up. Mean follow-up was 2 years. Objective success rate regarding the vaginal cuff is 95.4%. Global anatomical success rate was 85.5%. Urinary, coital and bowel symptoms were improved following surgery. Mesh exposure rate was 19.3%, with all cases managed conservatively or with minor interventions. CONCLUSION: Bilateral extraperitoneal USL is an effective operation to restore apical support with low morbidity, which avoids potential risks associated with opening the peritoneal cavity.

Organic material decomposition and nutrient dynamics in a mulch system enriched with leguminous trees in the Amazon

The new techniques proposed for agriculture in the Amazon region include rotational fallow systems enriched with leguminous trees and the replacement of biomass burning by mulching. Decomposition and nutrient release from mulch were studied using fine-mesh litterbags with five different leguminous species and the natural fallow vegetation as control. Samples from each treatment were analyzed for total C, N, P, K, Ca, Mg, lignin, cellulose content and soluble polyphenol at different sampling times over the course of one year. The decomposition rate constant varied with species and time. Weight loss from the decomposed litter bag material after 96 days was 30.1 % for Acacia angustissima, 32.7 % for Sclerolobium paniculatum, 33.9 % for Iinga edulis and the Fallow vegetation, 45.2 % for Acacia mangium and 63.6 % for Clitoria racemosa. Immobilization of N and P was observed in all studied treatments. Nitrogen mineralization was negatively correlated with phenol, C-to-N ratio, lignin + phenol/N ratio, and phenol/phosphorus ratios and with N content in the litterbag material. After 362 days of field incubation, an average (of all treatments), 3.3 % K, 32.2 % Ca and 22.4 % Mg remained in the mulch. Results confirm that low quality and high amount of organic C as mulch application are limiting for the quantity of energy available for microorganisms and increase the nutrient immobilization for biomass decomposition, which results in competition for nutrients with the crop plants.

Thermal modeling and management in ultrathin chip stack technology

This paper presents a thermal modeling for power management of a new three-dimensional (3-D) thinned dies stacking process. Besides the high concentration of power dissipating sources, which is the direct consequence of the very interesting integration efficiency increase, this new ultra-compact packaging technology can suffer of the poor thermal conductivity (about 700 times smaller than silicon one) of the benzocyclobutene (BCB) used as both adhesive and planarization layers in each level of the stack. Thermal simulation was conducted using three-dimensional (3-D) FEM tool to analyze the specific behaviors in such stacked structure and to optimize the design rules. This study first describes the heat transfer limitation through the vertical path by examining particularly the case of the high dissipating sources under small area. First results of characterization in transient regime by means of dedicated test device mounted in single level structure are presented. For the design optimization, the thermal draining capabilities of a copper grid or full copper plate embedded in the intermediate layer of stacked structure are evaluated as a function of the technological parameters and the physical properties. It is shown an interest for the transverse heat extraction under the buffer devices dissipating most the power and generally localized in the peripheral zone, and for the temperature uniformization, by heat spreading mechanism, in the localized regions where the attachment of the thin die is altered. Finally, all conclusions of this analysis are used for the quantitative projections of the thermal performance of a first demonstrator based on a three-levels stacking structure for space application.

Root system distribution of sugar cane as related to nitrogen fertilization, evaluated by two methods: monolith and probes

Few studies on sugar cane have evaluated the root system of the crop, in spite of its importance. This is mainly due to the difficulty of evaluation and high variability of results. The objective of this study was to develop an evaluation method of the cane root system by means of probes so as to evaluate the mass, distribution and metabolically active roots related to N fertilization at planting. For this purpose, an experiment was conducted in an Arenic Kandiustults with medium texture in Jaboticabal/SP, in a randomized block design with four replications and four treatments: control (without N) and 40, 80 and 120 kg ha-1 of N applied in the form of urea in the planting furrow of the cane variety SP81 3250. One week before harvest, a urea-15N solution was applied at the cane stalk base to detect active metabolism in the root system. Trenches of 1.5 m length and 0.6 m depth were opened between two sugar cane rows for root sampling by two methods: monoliths (0.3, 0.2 and 0.15 m wide, deep and long respectively) taken from the trench wall and by probe (internal diameter 0.055 m). For each method, 15 samples per plot were collected. The roots were separated from the soil in a sieve (2 mm mesh), oven-dried (at 65 ºC) and the dry matter was measured. Root sampling by probes resulted in root mass that did not differ from the evaluation in monoliths, indicating that this evaluation method may be used for sugar cane root mass, although neither the root distribution in the soil profile nor the rhizome mass were efficiently evaluated, due to the small sample volume. Nitrogen fertilization at planting did not result in a greater root accumulation in the sugar cane plant, but caused changes in the distribution of the root system in the soil. The absence of N fertilization led to a better root distribution in the soil profile, with 50, 34 and 16 % in the 0-0.2, 0.2-0.4 and 0.4-0.6 m layers, respectively; in the fertilized treatments the roots were concentrated in the surface layer, with on average 70, 17 and 13 % for the same layers. The metabolically active roots were concentrated in the center of the cane stool, amounting to 40 % of the total root mass, regardless of N fertilization (application of 120 kg ha-1 N or without N).

Dynamic compact thermal models with multiple power sources: application to an ultrathin chip stacking technology

Whereas numerical modeling using finite-element methods (FEM) can provide transient temperature distribution in the component with enough accuracy, it is of the most importance the development of compact dynamic thermal models that can be used for electrothermal simulation. While in most cases single power sources are considered, here we focus on the simultaneous presence of multiple sources. The thermal model will be in the form of a thermal impedance matrix containing the thermal impedance transfer functions between two arbitrary ports. Eachindividual transfer function element ( ) is obtained from the analysis of the thermal temperature transient at node ¿ ¿ after a power step at node ¿ .¿ Different options for multiexponential transient analysis are detailed and compared. Among the options explored, small thermal models can be obtained by constrained nonlinear least squares (NLSQ) methods if the order is selected properly using validation signals. The methods are applied to the extraction of dynamic compact thermal models for a new ultrathin chip stack technology (UTCS).

National Identity and the Preference for State Opting-Out in the Basque Country

We argue that preferences for secession are the expression of a common unobserved mechanisms determining national identity. This paper examines the hypothesis of independence of both preferences for secession (independent Euskadi) and Basque national identity in the light of Akerloff and Kranton (2000). We deal with psychological determinants of individuals' national identity formation as well as those that influence the propensity of individuals to support the secession of their perceived ¿imagined community¿ or nation.. We undertake econometric survey analysis for the Basque Country using a bivariate probit model and publicly available data from the Spanish Centre for Sociological Research. Our results provide robust evidence of a common determination of national identity and political preferences for the secession of the Basque Country consistently with Akerloff and Kranton model.

Effectiveness of fused magnesium potassium phosphate for marandu grass

The current high price of KCl and great dependence on importation to satisfy the Brazilian demand indicate the need for studies that evaluate the efficiency of other K sources, particularly those based on domestic raw material. For this purpose, a greenhouse experiment was conducted with samples of a sandy clay loam Typic Haplustox, in a completely randomized 4 x 3 x 2 factorial design: four K rates (0, 60, 120, and 180 mg kg-1), three sources (potassium chloride (KCl), fused magnesium potassium phosphate (FMPP) and a mixture of 70 % FMPP + 30 % KCl) and two particle sizes (100 and 60 mesh), with three replications. Potassium fertilization resulted in significant increases in shoot dry matter production and in K concentrations, both in soil and plants. The K source and particle size had no significant effect on the evaluated characteristics. Potassium critical levels in the soil and the shoots were 1.53 mmol c dm-3 and 19.1 g kg-1, respectively.

In vitro evaluation of staphylococcus aureus biofilm formation on bone grafts and bone substitues

Background: Bacteria form a biofilm on the surface of orthopaedic devices, causing persistent and infection. Little is known about biofilms formation on bone grafts and bone substitutes. We analyzed various representative materials regarding their propensity for biofilm formation caused by Staphylococcus aureus.Methods: As bone graft beta-tricalciumphosphate (b-TCP, CyclOsTM) and as bone substitute a tantalum metal mesh (trabecular metalTM) and PMMA (Pala-cosTM) were investigated. As test organism S. aureus (strain ATCC 29213) was used. Test materials were incubated with bacterial solution of 105 colony-forming units (cfu)/ml at 37°C for 24 h without shaking. After 24 h, the test materials were removed and washed 3 times in normal saline, followed by sonication in 50 ml Ringer solution at 40 kHz for 5 minutes. The resulting sonication fluid was plated in aliquots of 0.1 ml onto aerobe blood agar with 5% sheep blood and incubated at 37°C with 5% CO2 for 24 h. Then, bacterial counts were enumerated and expressed as cfu/ml. All experiments were performed in triplicate to calculate the mean ± standard deviation. The Wilcoxon test was used for statistical calculations.Results: The three investigated materials show a differing specific surface with b-TCB>trabecular metal>PMMA per mm2. S. aureus formed biofilm on all test materials as confirmed by quantitative culture after washing and sonication. The bacterial counts in sonication fluid (in cfu/ml) were higher in b-TCP (5.1 x 106 ± 0.6 x 106) and trabecular metal (3.7 x 106 ± 0.6 x 106) than in PMMA (3.9 x 104 ± 1.8 x 104), p<0.05.Conclusion: Our results demonstrate that about 100-times more bacteria adhere on b-TCP and trabecular metal than on PMMA, reflecting the larger surface of b-TCP and trabecuar metal compared to the one of PMMA. This in-vitro data indicates that bone grafts are susceptible to infection. Further studies are needed to evaluate efficient approaches to prevent and treat infections associated with bone grafts and substitutes, including modification of the surface or antibacterial coating.