Evaluation of solvent effect on the extraction of phenolic compounds and antioxidant capacities from the berries: application of principal component analysis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Microdissection testicular sperm extraction causes spermatogenic alterations in the contralateral testis

Testicular sperm extraction (TESE) associated with intracytoplasmic sperm injection has allowed many men presenting non-obstructive azoospermia to achieve fatherhood. Microdissection TESE (microTESE) was proposed as a method to improve sperm retrieval rates in these patients; however, there have been failures. Little is known about whether microTESE leads to spermatogenic alterations in the contralateral testis. We assessed histological outcomes of experimental microTESE in the contralateral testis of adult male rabbits. Nine adult male rabbits were divided into three groups: control (testicular biopsy to observe normal histological and morphometric values), sham (incision of the tunica vaginalis, and a contralateral testicular biopsy to observe histological and morphometric patterns, 45 days later), and study (left testicular microTESE, and a right testicular biopsy to observe histological and morphometric patterns, 45 days later). Sections were assessed by calculating Johnsen-like scores, and measuring total tubule diameter, lumen diameter and epithelial height. The results were compared using ANOVA and Bonferroni's statistical analysis. Morphometric evaluation of the seminiferous tubules did not demonstrate differences between the three groups. However, microTESE caused spermatogenic alterations, leading to maturation arrest in the contralateral testis.

Considerações clínicas em implantes imediatos

The biological principles of osseointegration caused the rehabilitation treatment with osseointegrated implant become a safe, well alternative accepted by the dental community for the high success rate, allowing the preparation of functional and aesthetic prostheses in edentulous and partial patients. We passed the initial phase of functional vision for an aesthetic approach, too, depending on the demands of the patient and the quest for excellence by professionals. Over these last years, implant treatment has undergone many changes in surgical and prosthetic protocols. The less invasive surgical techniques and the development of restorative materials, especially ceramics allow the prosthetic rehabilitation of high functional quality and aesthetics. The installation of implants in sockets immediately after extraction of teeth involved by fracture, periodontal disease, endodontic lesions, is part of the arsenal of techniques for rehabilitating a number of advantages that we get to the outcome of multidisciplinary treatment. For this, we must consider several criteria in its planning as a fundamental unit, adjacent teeth, multiple losses, system, form and number of implants, type of retention of the prosthesis components, the patient expectation of the outcome perspective, gingival biotype, standard of ridge resorption, the smile line, etc. occlusal analysis. With the three-dimensional placement of the implant can immediately join the biological processes of repair of the socket, implant osseointegration, speeding treatment time. Much has been made by companies in the surface treatment of endosseous implants to be osseointegration shortened and restorative procedures started earlier, bringing benefits to the patient and professional. Among the main advantages we can emphasize the preservation of the structures adjacent to the teeth replaced, minor resorption of bone tissue involved... (Complete abstract click electronic access below)

Feature extraction in pressure signals for leak detection in water networks

Techniques based on signal analysis for leak detection in water supply systems typically use long pressure and/or flow data series of variable length. This paper presents the feature extraction from pressure signals and their application to the identification of changes related to the onset of a leak. Example signals were acquired from an experimental laboratory circuit, and features were extracted from temporal domain and from transformed signals. Statistical analysis of features values and a classification method were applied. It was verified the feasibility of using feature vectors for distinguish data acquired in the absence or presence of a leak.

Obtention and characterization of collagen and chitosan based cements for bone regerneration. Part 1: extraction and characterization of collagen

Several cements are used as biomaterials. Biopolymers such as chitosan and collagen exhibit excellent biocompatibility and can be used in the remodeling of bone tissue. The cement must have high mechanical strength and compatibility with original tissue. In this context, the objective of this study was to extract, characterize and cross-link collagen from bovine tendon, forlater associate it with chitosan and calcium phosphate to obtain cements for bone regeneration. Glutaraldehyde was used as cross-linker in 0.1, 0.5, 1.0 and 10% concentration. Infrared analysis confirmed the presence of functional groups characteristic of collagen, whereas the capacity of water absorption decreased with the increasing of cross-linking degree. Denaturation temperatures of collagen samples were obtained by Differential Scanning Calorimetry and Scanning Electron Microscopy showed the fiber structure characteristics of collagen, which were more organized for high degree of cross-linking samples.

Controlling mechanical undesirable side effects with a tooth indicated for extraction: free anchorage

This manuscript describes the use of a tooth indicated for extraction due
to orthodontic reasons as an anchorage aid to receive undesirable side effects caused by orthodontic uprighting of a contralateral molar tooth. The mandibular right second molar was mesially tipped as a result of loss of the adjacent first molar. Since the treatment plan involved extraction of the mandibular left first premolar, undesirable side effects associated with the molar uprighting movement were transferred to this tooth. Once the second molar was vertical, the premolar was extracted and the treatment continued. The results suggest that treatment time can be reduced if undesirable orthodontic mechanical side effects can be directed to a tooth whose extraction is indicated.

Estudio histológico del processo de reparación alveolar después de la aplicación tópica de la solucioón anestésica prilocaína 3 % con felipressina o,o3 ui/ml

The aim of this study was to evaluate the local anesthetic solution, composed by Prilocaine 3% and felipressin 0,03 UI/ml, influence on the alveolar repair process in rats after dental extraction. This research was previously approved by the Ethic Committee in Research of the Masters Degree Program in Oral and Maxillofacial Surgery of the Marília University (UNIMAR), Marília, São Paulo, Brazil. It was an experimental, randomly controlled study, with bifactorial analysis (group control versus experimental group, in function of the postoperative times (2 X 4)). For the accomplishment of this study 32 rats were used (Rattus norvegicus, albinus, Wistar), males, adults, weighing between 280 and 320 grams. The animals were selected and divided into Group I (control) and Group II (Citocain 3%® - Prilocaine 3% with felipressin 0,03UI/ml) with 16 rats each; being four animals of the Group I and four of the Group II, destined to the euthanasia in the postoperative periods of 3rd, 7th, 15th and 24th days. The histological analysis with base in the developed methodology, allowed us to conclude that the anesthetic solution of Citocain 3%® applied with gauze compress on the surgical dental wound, produced tissue events that committed the basic biological principles, that are responsible for the regeneration of the gingival epithelium and the alveolar process repair in rats. The Group I presented better results in the alveolar repair when compared to the Group II.

A combined approach for the treatment of resorbed fresh sockets allowing immediate implant restoration: a 2-year follow-up

Introduction: The demand for optimal esthetics has increased with the advance of the implant dentistry and with the desire for easier, safer and faster technique allowing predictable outcomes. Thus, the aim of this case report was to describe a combined approach for the treatment of a periodontally compromised tooth by means of atraumatic tooth extraction, immediate flapless implant placement, autogenous block and particulate bone graft followed by connective tissue graft and immediate provisionalization of the crown in the same operatory time. Case Report: A 27-year-old woman underwent the proposed surgical procedures for the treatment of her compromised maxillary right first premolar. The tooth was removed atraumatically with a periotome without incision. A dental implant was inserted 3 mm apical to the cement-enamel junction of the adjacent teeth enabling the ideal tridimensional implant position. An osteotomy was performed in the maxillary tuber for block bone graft harvesting that allowed the reconstruction of the alveolar buccal plate. Thereafter, an autogenous connective tissue graft was placed to increase both the horizontal and vertical dimensions of the alveolar socket reaching the patient functional and esthetic expectations. Conclusion: This treatment protocol was efficient to create a harmonious gingival architecture with sufficient width and thickness, maintaining the stability of the alveolar bone crest yielding excellent aesthetic results after 2-years of follow-up. We suggest that this approach can be considered a viable alternative for the treatment of periodontally compromised tooth in the maxillary esthetic area enhancing patient comfort and satisfaction.

Replantation as treatment for extrusive luxation

In the treatment of extrusive luxation cases, it is important that the repositioning of extruded tooth in the socket is done as soon as possible. If this does not occur, periapical clot becomes organized and makes replantation difficult reposition. In this article the patient referred to the Clinics for dental trauma sustaining extrusive luxation of the maxillary right central incisor. The patient reported having suffered a bicycle accident 12 days before, which caused traumatic tooth injuries. The repositioning was attempted without success and an alternative form of treatment was necessary to solve the case. Intentional tooth replantation, which is the deliberate extraction of the tooth and its replantation, was indicated. This technique allows clot removal and correct repositioning of the extruded tooth. Care should be taken as endodontic treatment is required for the prevention of subsequent infection-related resorption. Intracanal dressing with calcium hydroxide was used for 30 days before final root filling. Splint, systemic antibiotics and avoidance of further damage to the root surface is also important. After 49 months, showed clinical and radiographic characteristics of normality and demonstrates the availability of this technique to adversity in trauma.

Double-setting alpha-tricalcium phosphate cement provided with interconection channels in rabbits after enucleation: a potential implant for the anophthalmic socket

The purpose of this study was to evaluate the macroscopy and microstructure of a double setting alpha-tricalcium phosphate bone cement sphere provided with interconnection channels (alpha-TCP-i), as well as the integration of the implant with the rabbits' orbital tissue, through macroscopic analysis and histopathology. The external and internal surfaces of the alpha-TCP-i were evaluated macroscopically and by electron microscopy. Twelve New Zealand rabbits received 12mm implants of alpha-TCP-i following enucleation of the left eye. The clinical assessment was undertaken daily during the first 15 days, followed by fortnightly assessment until the end of the study period. For the morphological analysis, exenteration was performed in 3 animals per experimental period (15, 45, 90 and 180 days). The external and internal surfaces of the implant appeared solid, smooth and compact, with six channels which interconnected centrally. The micro-architecture was characterized by the formation of columns of hexagonal crystals. No signs of infection, exposure, dehiscence of sutures or extrusion of the implant were noted in any of the animals during the entire period of the study. The morphological evaluation demonstrated the presence of a thin capsule around the implant, from whence appeared fibro-vascular projections, which penetrated it through the interconnecting channels. In the first days after the insertion of the implant, an intense inflammatory reaction was noted. At 180 days, however, there were no signs of inflammation. The alpha-tricalcium phosphate cement implant was well tolerated in this rabbit model and appeared to be relatively inert with some fibrovascular ingrowth through the large channels.

High precision and selectivity for quantitation of enrofloxacin and ciprofloxacin in five chicken tissues using solid phase extraction and ESI LC-MS/MS for application in monitoring residues

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Antibiotic prophylaxis for third molar extraction in healthy patients: current scientific evidence

Third molar extraction is one of the most frequently performed procedures in the dental clinic, and it is associated with innumerable trans- and postoperative complications, such as pain, trismus, edema, localized alveolar osteitis, and surgical site infection. Some authors advocate the use of local or systemic antibiotics to reduce the incidence of these postoperative complications. However, several studies have revealed an insignificant gain after using antibiotics. Despite the risks of allergic reactions, toxicity, and the development of resistant microorganisms, about 50% of dentists routinely prescribe the use of prophylactic antibiotics for this purpose. The goal of this paper is to evaluate the scientific evidence that justifies antibiotic prescription to healthy patients undergoing third molar extraction.

Development of a new clean methodology with ultrasound-assisted extraction for analysis of sodium in pet foods

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Semiautomatic object-space road extraction combining a stereoscopic image pair and a TIN-Based DTM

In this letter, a semiautomatic method for road extraction in object space is proposed that combines a stereoscopic pair of low-resolution aerial images with a digital terrain model (DTM) structured as a triangulated irregular network (TIN). First, we formulate an objective function in the object space to allow the modeling of roads in 3-D. In this model, the TIN-based DTM allows the search for the optimal polyline to be restricted along a narrow band that is overlaid upon it. Finally, the optimal polyline for each road is obtained by optimizing the objective function using the dynamic programming optimization algorithm. A few seed points need to be supplied by an operator. To evaluate the performance of the proposed method, a set of experiments was designed using two stereoscopic pairs of low-resolution aerial images and a TIN-based DTM with an average resolution of 1 m. The experimental results showed that the proposed method worked properly, even when faced with anomalies along roads, such as obstructions caused by shadows and trees.

Constraints on parton distribution functions and extraction of the strong coupling constant from the inclusive jet cross section in pp collisions at root s=7TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)