A survey of the meat goat industry in Queensland and New South Wales. 1. General property information, goat and pasture management.

This study aimed to survey farmers knowledge and practices on the management of pastures, stocking rates and markets of meat goat-producing enterprises within New South Wales and Queensland, Australia. An interview-based questionnaire was conducted on properties that derived a significant proportion of their income from goats. The survey covered 31 landholders with a total land area of 567 177 ha and a reported total of 160 010 goats. A total of 55% (17/31) of producers were involved in both opportunistic harvesting and commercial goat operations, and 45% (14/31) were specialised seedstock producers. Goats were the most important livestock enterprise on 55% (17/31) of surveyed properties. Stocking rate varied considerably (0.3?9.3 goats/ha) within and across surveyed properties and was found to be negatively associated with property size and positively associated with rainfall. Overall, 81% (25/31) of producers reported that the purpose of running goats on their properties was to target international markets. Producers also cited the importance of targeting markets as a way to increase profitability. Fifty-three percent of producers were located over 600 km from a processing plant and the high cost of freight can limit the continuity of goats supplied to abattoirs. Fencing was an important issue for goat farmers, with many producers acknowledging this could potentially add to capital costs associated with better goat management and production. Producers in the pastoral regions appear to have a low investment in pasture development and opportunistic goat harvesting appears to be an important source of income.

3D Surveying and Data Management towards the Realization of a Knowledge System for Cultural Heritage

The research activities involved the application of the Geomatic techniques in the Cultural Heritage field, following the development of two themes: Firstly, the application of high precision surveying techniques for the restoration and interpretation of relevant monuments and archaeological finds. The main case regards the activities for the generation of a high-fidelity 3D model of the Fountain of Neptune in Bologna. In this work, aimed to the restoration of the manufacture, both the geometrical and radiometrical aspects were crucial. The final product was the base of a 3D information system representing a shared tool where the different figures involved in the restoration activities shared their contribution in a multidisciplinary approach. Secondly, the arrangement of 3D databases for a Building Information Modeling (BIM) approach, in a process which involves the generation and management of digital representations of physical and functional characteristics of historical buildings, towards a so-called Historical Building Information Model (HBIM). A first application was conducted for the San Michele in Acerboli’s church in Santarcangelo di Romagna. The survey was performed by the integration of the classical and modern Geomatic techniques and the point cloud representing the church was used for the development of a HBIM model, where the relevant information connected to the building could be stored and georeferenced. A second application regards the domus of Obellio Firmo in Pompeii, surveyed by the integration of the classical and modern Geomatic techniques. An historical analysis permitted the definitions of phases and the organization of a database of materials and constructive elements. The goal is the obtaining of a federate model able to manage the different aspects: documental, analytic and reconstructive ones.

Analytics and Methods for Logistic System Design and Operations Management

Analytics is the technology working with the manipulation of data to produce information able to change the world we live every day. Analytics have been largely used within the last decade to cluster people’s behaviour to predict their preferences of items to buy, music to listen, movies to watch and even electoral preference. The most advanced companies succeded in controlling people’s behaviour using analytics. Despite the evidence of the super-power of analytics, they are rarely applied to the big data collected within supply chain systems (i.e. distribution network, storage systems and production plants). This PhD thesis explores the fourth research paradigm (i.e. the generation of knowledge from data) applied to supply chain system design and operations management. An ontology defining the entities and the metrics of supply chain systems is used to design data structures for data collection in supply chain systems. The consistency of this data is provided by mathematical demonstrations inspired by the factory physics theory. The availability, quantity and quality of the data within these data structures define different decision patterns. Ten decision patterns are identified, and validated on-field, to address ten different class of design and control problems in the field of supply chain systems research.

Psychological characterization of hypertensive patients: associations with adherence to pharmacological treatment and self-management

Introduction: The role of psychosocial factors in the onset and progression of essential hypertension has been object of a large body of literature, yet findings appear to be controversial. Aims: We assessed the predictive role of psychosomatic syndromes, affective symptomatology, psychological reactance, psychological distress, well-being and quality of life on adherence to antihypertensive medications, lifestyle behaviors, hypertension severity and absolute cardiovascular risk grading, as well as their temporal stability at 1-year follow-up, in a sample of hypertensive patients. In addition, we aimed to validate the Italian version of the Hong Psychological Reactance Scale (HPRS). Methods: Eighty consecutive hypertensive outpatients treated with antihypertensive medications were compared to 80 controls. Psychosocial variables were assessed using clinical interviews and self-rating questionnaires at baseline and at 1-year follow-up. Cardiac parameters were also collected. One-hundred and fifty individuals from general population provided data for the HPRS validation. Results: Hypertensive patients reported significantly higher levels of psychological distress and lower levels of psychological well-being at baseline compared to controls. Among hypertensive patients, allostatic overload (AO) was the most frequently reported psychosomatic syndrome at baseline. Patients with AO displayed significantly greater levels of psychological distress and lower levels of well-being and quality of life than those without. Further, patients with illness denial were significantly more likely to report poor adherence to pharmacological treatment and, as well as those with higher levels of affective symptomatology, were less likely to follow a balanced diet. At follow-up, patients displayed significantly higher levels of well-being and lower levels of stress, mental pain and quality of life. Conclusions: Findings suggest the clinical relevance of psychosocial factors and psychosomatic syndromes in the progression of hypertension, with important implications for its management. As to the Italian validation of the HPRS, results support previous findings, even though a confirmatory factor analysis should be carried out.

Geolocalizador de noticias temáticas: el caso de los riesgos naturales

Las bases de datos geoespaciales temáticas en distintas escalas geográficas y temporales, son necesarias en multitud de líneas de investigación. Una de ellas es la gestión y alerta temprana de riesgos de desastres por amenazas naturales (inundaciones, huracanes, terremotos, etc.). Las noticias sobre éste tema se publican habitualmente en periódicos digitales de todo el mundo y comportan un alto contenido geográfico. Este trabajo pretende extraer automáticamente las noticias emitidas por canales de re-difusión web (conocidos por las siglas RSS en inglés) para georreferenciarlas, almacenarlas y distribuirlas como datos geoespaciales. Mediante técnicas de procesamiento de lenguaje natural y consultas a bases de datos de topónimos realizaremos la extracción de la información. El caso de estudio se aplicará para México y todos los componentes utilizados serán de código abierto

Managing Debris Flow Risks

Debris flows represent a widespread threat to villages and small towns in the Swiss Alps. For many centuries people “managed” such risks by trying to avoid hazardous areas. However, major debris flow and flood events in the last 25 years have revealed that the degree of freedom to engage in this type of risk management has substantially decreased. This became especially evident during the 1999 disasters in a number of places in Switzerland. The winter of that year was unusually wet. In February heavy snowfall triggered destructive avalanches. In May high temperatures caused heavy snowmelt, with excessive rainfall contributing more water to the already saturated soils. Landslides, debris flows and floods were triggered in many locations, including Sörenberg. Hazard prevention and disaster management have a long tradition in Switzerland, although an integrated approach to risk management is rather new. Only in recent years have methods and tools been developed to assess hazards, define protection goals, and implement disaster reduction measures. The case of Sörenberg serves as an example of how today's approaches to disaster reduction are implemented at the local level.

Bioterrorism preparedness at a hospital level in the Southwest Region of the United States -- A systematic review

Since the tragic events of September, 11 2001 the United States bioterrorism and disaster preparedness has made significant progress; yet, numerous research studies of nationwide hospital emergency response have found alarming shortcomings in surge capacity and training level of health care personnel in responding to bioterrorism incidents. The primary goals of this research were to assess hospital preparedness towards the threat of bioterrorist agents in the Southwest Region of the United States and provide recommendations for its improvement. Since little formal research has been published on the hospital preparedness of Oklahoma, Arizona, Texas and New Mexico, this research study specifically focused on the measurable factors affecting the respective states' resources and level of preparedness, such as funding, surge capacity and preparedness certification status.^ Over 300 citations of peer-reviewed articles and 17 Web sites were reviewed, of which 57 reports met inclusion criteria. The results of the systematic review highlighted key gaps in the existing literature and the key targets for future research, as well as identified strengths and weaknesses of the hospital preparedness in the Southwest states compared to the national average. ^ Based on the conducted research, currently, the Southwest states hospital systems are unable fully meet presidential preparedness mandates for emergency and disaster care: the staffed beds to 1,000 population value fluctuated around 1,5 across the states; funding for the hospital preparedness lags behind hospital costs by millions of dollars; and public health-hospital partnership in bioterrorism preparedness is quite weak as evident in lack of joint exercises and training. However, significant steps towards it are being made, including on-going hospital preparedness certification by the Joint Commission of Health Organization. Variations in preparedness levels among states signify that geographic location might determine a hospital level of bioterrorism preparedness as well, tending to favor bigger states such as Texas.^ Suggested recommendations on improvement of the hospital bioterrorism preparedness are consistent with the existing literature and include establishment and maintenance of solid partnerships between hospitals and public health agencies, conduction of joint exercises and drills for the health care personnel and key partners, improved state and federal funding specific to bioterrorism preparedness objectives, as well as on-going training of the clinical personnel on recognition of the bioterrorism agents.^

Using damage from 2010 Haiti earthquake for vulnerability estimation of typical structures in Port-au-Prince (Haiti).

After the 2010 Haiti earthquake, that hits the city of Port-au-Prince, capital city of Haiti, a multidisciplinary working group of specialists (seismologist, geologists, engineers and architects) from different Spanish Universities and also from Haiti, joined effort under the SISMO-HAITI project (financed by the Universidad Politecnica de Madrid), with an objective: Evaluation of seismic hazard and risk in Haiti and its application to the seismic design, urban planning, emergency and resource management. In this paper, as a first step for a structural damage estimation of future earthquakes in the country, a calibration of damage functions has been carried out by means of a two-stage procedure. After compiling a database with observed damage in the city after the earthquake, the exposure model (building stock) has been classified and through an iteratively two-step calibration process, a specific set of damage functions for the country has been proposed. Additionally, Next Generation Attenuation Models (NGA) and Vs30 models have been analysed to choose the most appropriate for the seismic risk estimation in the city. Finally in a next paper, these functions will be used to estimate a seismic risk scenario for a future earthquake.

Using the damage from 2010 Haiti earthquake for calibrating vulnerability models of typical structures in Port-au-Prince (Haiti)

After the 2010 Haiti earthquake, that hits the city of Port-au-Prince, capital city of Haiti, a multidisciplinary working group of specialists (seismologist, geologists, engineers and architects) from different Spanish Universities and also from Haiti, joined effort under the SISMO-HAITI project (financed by the Universidad Politecnica de Madrid), with an objective: Evaluation of seismic hazard and risk in Haiti and its application to the seismic design, urban planning, emergency and resource management. In this paper, as a first step for a structural damage estimation of future earthquakes in the country, a calibration of damage functions has been carried out by means of a two-stage procedure. After compiling a database with observed damage in the city after the earthquake, the exposure model (building stock) has been classified and through an iteratively two-step calibration process, a specific set of damage functions for the country has been proposed. Additionally, Next Generation Attenuation Models (NGA) and Vs30 models have been analysed to choose the most appropriate for the seismic risk estimation in the city. Finally in a next paper, these functions will be used to estimate a seismic risk scenario for a future earthquake.

Goal-based modeling of dynamically adaptive system requirements

Self-adaptation is emerging as an increasingly important capability for many applications, particularly those deployed in dynamically changing environments, such as ecosystem monitoring and disaster management. One key challenge posed by Dynamically Adaptive Systems (DASs) is the need to handle changes to the requirements and corresponding behavior of a DAS in response to varying environmental conditions. Berry et al. previously identified four levels of RE that should be performed for a DAS. In this paper, we propose the Levels of RE for Modeling that reify the original levels to describe RE modeling work done by DAS developers. Specifically, we identify four types of developers: the system developer, the adaptation scenario developer, the adaptation infrastructure developer, and the DAS research community. Each level corresponds to the work of a different type of developer to construct goal model(s) specifying their requirements. We then leverage the Levels of RE for Modeling to propose two complementary processes for performing RE for a DAS. We describe our experiences with applying this approach to GridStix, an adaptive flood warning system, deployed to monitor the River Ribble in Yorkshire, England.

A domain specific modeling approach for coordinating user-centric communication services

Rapid advances in electronic communication devices and technologies have resulted in a shift in the way communication applications are being developed. These new development strategies provide abstract views of the underlying communication technologies and lead to the so-called user-centric communication applications. One user-centric communication (UCC) initiative is the Communication Virtual Machine (CVM) technology, which uses the Communication Modeling Language (CML) for modeling communication services and the CVM for realizing these services. In communication-intensive domains such as telemedicine and disaster management, there is an increasing need for user-centric communication applications that are domain-specific and that support the dynamic coordination of communication services commonly found in collaborative communication scenarios. However, UCC approaches like the CVM offer little support for the dynamic coordination of communication services resulting from inherent dependencies between individual steps of a collaboration task. Users either have to manually coordinate communication services, or reply on a process modeling technique to build customized solutions for services in a specific domain that are usually costly, rigidly defined and technology specific. ^ This dissertation proposes a domain-specific modeling approach to address this problem by extending the CVM technology with communication-specific abstractions of workflow concepts commonly found in business processes. The extension involves (1) the definition of the Workflow Communication Modeling Language (WF-CML), a superset of CML, and (2) the extension of the functionality of CVM to process communication-specific workflows. The definition of WF-CML includes the meta-model and the dynamic semantics for control constructs and concurrency. We also extended the CVM prototype to handle the modeling and realization of WF-CML models. A comparative study of the proposed approach with other workflow environments validates the claimed benefits of WF-CML and CVM.^

Stress pós traumático em situação de catástrofe: Profissionais de saúde

Dissertação de Mestrado apresentada no Instituto Superior de Psicologia Aplicada para obtenção do Grau de Mestre na especialidade de Psicologia Clínica

Análisis de la relación entre la gestión del riesgo y la vulnerabilidad. Caso de estudio: Brisas del Volador, Ciudad Bolívar

Este estudio analiza la relación entre la gestión del riesgo y la vulnerabilidad en el barrio Brisas del Volador, ubicado en Ciudad Bolívar, Bogotá. Se explicó el cambio en el enfoque de estudio y manejo de los desastres a partir de la consolidación de términos relacionados a procesos sociales, como lo son la vulnerabilidad y el riesgo. Así mismo, se describieron los cambios que se han establecido en la forma de abordar el riesgo en Colombia, tanto a nivel nacional como distrital. La investigación reveló la forma como se ha generado la vulnerabilidad a partir de la intersección de distintos procesos en un asentamiento informal y como se materializan diferentes elementos para conformar la vulnerabilidad global. A partir de esto, se recopilaron las acciones implementadas en la zona de estudio desde la gestión del riesgo, se clasificaron en cada uno de los tres procesos: conocimiento, reducción o manejo del desastre y posteriormente se estudiaron. Con base en esto, se analizaron las medidas que tuvieron una incidencia en la reducción de la vulnerabilidad y los resultados que generaron.

Iowa Strategy for Homeland Security and Emergency Management 2009-2014, August 31, 2009

Address sustainability in all efforts. Sustainability should be at the core of all levels of homeland security and emergency management effort in Iowa. Capabilities need to be built for the long term, and without a sustainability plan in place, projects can quickly deplete uncertain levels of funding. Utilize an all-hazards methodology. Developing capabilities that are effective during a variety of disaster and emergency scenarios represents sound planning and resource management. Enhance capabilities through joint planning, training and exercise. Effective capabilities developed through coordinated planning efforts and an ongoing joint training and exercising program to ensure sustainment of prepared response. Utilize a collaborative approach to build capability. We will utilize whatever partnerships are necessary to build capability in the most effective manner possible. Regional partnerships have been, and will continue to be, in the forefront of the State of Iowa’s efforts to build and enhance capability. Enhance statewide capabilities. Whenever possible, we will identify and augment existing resources to provide statewide capability during a disaster or terrorist attack. Awareness, outreach and education. Open communication is critical to the success of any initiative. All projects implemented will have awareness, education and outreach components to ensure that all stakeholders are informed as to their responsibilities, capabilities and access. Information sharing and a common operating picture. The timely exchange of critical/actionable information is imperative to the success of every operation. The identification of a common operating picture allows decision makers to make informed decisions based on a unified understanding of the events around them.

Iowa Strategy for Homeland Security and Emergency Management 2015-2017, October 1, 2014

Address sustainability in all efforts. Sustainability should be at the core of all levels of homeland security and emergency management effort in Iowa. Capabilities need to be built for the long term, and without a sustainability plan in place, projects can quickly deplete uncertain levels of funding. Utilize an all-hazards methodology. Developing capabilities that are effective during a variety of disaster and emergency scenarios represents sound planning and resource management. Enhance capabilities through joint planning, training and exercise. Effective capabilities developed through coordinated planning efforts and an ongoing joint training and exercising program to ensure substantiate of prepared response. Utilize a collaborative approach to build capability. We will utilize whatever partnerships are necessary to build capability in the most effective manner possible. Regional partnerships have been, and will continue to be, in the forefront of the State of Iowa’s efforts to build and enhance capability. Enhance statewide capabilities. Whenever possible, we will identify and augment existing resources to provide statewide capability during a disaster or terrorist attack. Awareness, outreach and education. Open communication is critical to the success of any initiative. All projects implemented will have awareness, education and outreach components to ensure that all stakeholders are informed as to their responsibilities, capabilities and access. Information sharing and a common operating picture. The timely exchange of critical/actionable information is imperative to the success of every operation. The identification of a common operating picture allows decision makers to make informed decisions based on a unified understanding of the events around them.