Relação entre características morfológicas da cariopse e fusariose em milho

Fusarium moniliforme causa sérios prejuízos no rendimento do milho. Suspeita-se que a entrada do fungo na cariopse ocorra pela cicatriz do estilete, e que este fato e o nível de infestação por F. moniliforme estejam relacionados com características morfológicas da cariopse. O objetivo deste trabalho foi identificar características morfológicas que conferem resistência a F. moniliforme em cariopses de milho. Cariopses de seis linhagens de milho, com e sem inoculação do patógeno, foram avaliadas utilizando-se de estereomicroscópio e o microscópio eletrônico de varredura. Características morfológicas da cariopse, tais como: tegumento com saliências e reentrâncias acentuadas, pericarpo pouco espesso, amido menos compacto e presença do canal estilar favorecem a penetração de F. moniliforme.

Análise ultra-estrutural de folhas de três espécies de Solanaceae após inoculação com o vírus da necrose branca do tomateiro (VNBT - Tymovirus)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lanosidade em cultivares de pêssego (Prunus persica (L.) Batsch): estudos anatômicos e ultra-estruturais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do tamanho dos grânulos nas características estruturais e físico-químicas do amido de trigo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Características estruturais e físico-químicas de amidos de mandioquinha-salsa (Arracacia xanthorrhiza)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do resfriamento sobre a textura post-mortem da carne do peixe matrinxã Brycon cephalus

Os mecanismos que causam o amolecimento e a perda na textura post-mortem da carne de matrinxã foram determinados por meio das mudanças na microestrutura do músculo, imediatamente após a morte e depois de 12 horas de estocagem a -3°C. As observações na microestrutura, realizadas com microscópio eletrônico de transmissão, foram semelhantes aos resultados obtidos na força de ruptura do músculo medidos com o texturômetro. Os valores da força da ruptura foram menores para a carne após o resfriamento. Observou-se que as fibras do colágeno do tecido conectivo pericelular se desintegraram e que as do colágeno do tecido conectivo do miocommata conservaram sua arquitetura e integridade. Houve pouca degradação da linha Z. Isso sugere que o amolecimento post-mortem da carne de mantrinxã, durante a estocagem a -3°C, é causado pela degradação do tecido conectivo pericelular.

Effects of a non-rinse conditioner on the enamel of primary teeth

O objetivo deste estudo in vitro foi de avaliar ao microscópio eletrônico de varredura os aspectos morfológicos do esmalte de dentes decíduos após condicionamento com ácido fosfórico a 36% ou com um agente condicionador não lavável. Foram selecionados 10 dentes decíduos anteriores esfoliados naturalmente. As amostras sofreram limpeza coronária com pasta de pedra-pomes e água, em baixa-velocidade. O condicionamento foi realizado no esmalte da face vestibular. Os espécimes foram divididos em dois grupos: G1 (n=10): condicionamento com ácido fosfórico a 36% na forma de gel - Conditioner 36 (Dentsply) durante 20 segundos, seguidos de lavagem com água durante 15 segundos; G2 (n=10): condicionamento com NRC - Non Rinse Conditioner (Dentsply) durante 20 segundos, seguidos de secagem com ar durante 15 segundos. As amostras foram desidratadas, montadas em bases metálicas e cobertas com ouro para análise ao microscópio eletrônico de varredura (Jeol JSM 6.100). A análise da eletromicrografias revelou que ambos os agentes condicionadores foram efetivos para condicionar o esmalte de dentes decíduos, causando microporosidades mas com melhor resultado quando utilizou-se o ácido fosfórico a 36% na forma de gel.

Caracterização morfológica de frutos, de sementes e do desenvolvimento pós-seminal de Licania tomentosa (Benth.) Fritsch

O presente trabalho teve por objetivo descrever a morfologia do fruto, da semente e do desenvolvimento pós-seminal de oiti (Licania tomentosa (Benth.) Fritsch.). As sementes e os frutos foram avaliados quanto às dimensões e forma por meio de mensurações com paquímetro digital e observações realizadas em microscópio estereoscópico e microscópio eletrônico de varredura. Os frutos de oiti são drupáceos, elípticos, monospérmicos, carnosos, indeiscentes, com pedúnculos não articulados, epicarpo liso, glabro, de coloração amarela a alaranjada, mesocarpo carnoso, fibroso, coloração amarela a laranja e endocarpo membranáceo, de coloração branca a creme, medindo aproximadamente 6,19cm de comprimento, 3,3cm de largura, 39,5g de massa fresca e 17,3g de massa seca. As sementes são exalbuminosas, de forma elíptica, com tegumento liso, de coloração marrom, de cartáceo a coriáceo, com rafe visível longitudinalmente, micrópila inconspícua e hilo pouco aparente, com cotilédones crassos, elípticos e plano-convexos, de coloração creme a levemente rósea. O embrião é diminuto, reto, central, com eixo embrionário diferenciado em plúmula e eixo hipocótilo-radicular. O comprimento, largura e massa fresca e seca das sementes são cerca de 4,07, 2,18cm, 12,7 e 7,2g, respectivamente. A germinação é criptocotiledonar hipógea, com eófilos alterno-dísticos e lanosos, com estômatos paracíticos e duas glândulas na base do limbo ou, raramente no ápice, na face abaxial da folha.

Breakdown of resistance in sweet pepper against Pepper yellow mosaic virus in Brazil

Plantas de Capsicum annuum cv. Magali R, resistentes ao Pepper yellow mosaic virus (PepYMV), exibindo sintomas severos de mosaico amarelo, malformação foliar e subdesenvolvimento foram encontradas em plantios na região de Lins, SP, Brasil, em 2003/04. Partículas semelhantes àquelas do gênero Potyvirus foram observadas em extrato foliar de planta infectada examinado em microscópio eletrônico de transmissão. O extrato foliar também reagiu com anti-soro contra o PepYMV em PTA-ELISA. Além de C. annuum cv. Magali R, esse potyvirus também infectou sistemicamente C. annuum cv. Rubia R, que é resistente ao PepYMV. A seqüência de nucleotídeos de parte do gene da proteína capsidial (CP) desse potyvirus apresentou 96-98% de identidade com a de outros isolados do PepYMV. A seqüência parcial de nucleotídeos da região 3' não traduzida (3' NTR) apresentou 94-96% de identidade com a do PepYMV. Esses resultados são indicativos de que o potyvirus que quebrou a resistência em pimentão é um isolado do PepYMV.

The use of ultrasound for cleaning the surface of stainless steel and nickel-titanium endodontic instruments

Aim the aim of this study was to evaluate the efficacy of ultrasound in cleaning the surface of stainless steel and Ni-Ti endodontic instruments.Methodology Twenty nickel-titanium instruments (10 Quantec files and 10 Nitiflex) and 20 stainless steel K-files (10 Maillefer-Dentsply and 10 Moyco Union Broach) were removed from their original packages and evaluated using a scanning electron microscope. Scores were given for the presence of residues on the surface or the instruments. The instruments were then cleaned in an ultrasonic bath containing only distilled water or detergent solution for 15 min, and re-evaluated, using scanning electron microscopy.Results Before cleaning, a greater amount of metallic debris was observed on the nickel-titanium Quantec instruments (P < 0.05), when compared to those made of stainless steel. Statistical analysis showed that the use of ultrasound was effective for cleaning the instruments, regardless of the irrigating solution or the instruments type (P < 0.05).Conclusions the use of ultrasound proved to be an efficient method for the removal of metallic particles from the surface of stainless steel and Ni-Ti endodontic instruments.

Secretion of salivary glands of the Brazilian termite Serritermes serrifer Hagen&Bates (Isoptera: Serritermitidae)

The salivary glands of termites are composed of several secretory acini connected by ducts. These glands, in the Brazilian termite Serritermes serrifer, were examined through the electron microscope. The ultrastructure of worker salivary acinus revealed central ductule cells and four different types of cells. Cells of type I contain an abundance of electron-lucid vacuoles of various sizes which fuse to form enormous vacuolar structures that fill up most of the cell. Cells of type II are narrow cells in which the secretion is contained in small clear vacuoles of approximately equal diameter. Both of these cellular types have numerous Golgi bodies and rough endoplasmic reticulum. Type III or parietal cells have an apical plasma membrane deeply infolded and lined by microvilli. This type of cell is located in the acinar periphery and occurs in pairs. Cells of type IV are completely filled with electrondense secretion. The secretory granules can be small in some cells or large and similar to fingerprints in others. This is the first report of the occurrence of these spiral or concentric rings of dense material in the salivary gland of Isoptera.

New insights into the in vitro organogenesis process: the case of Passiflora

We present evidences that ultrastructural electron microscope findings are valuable ways to understand the in vitro regeneration process, in particular in the yellow passion fruit. Shoot-regeneration was induced in hypocotyl and leaf-derived explants using 4.44 mu M BAP, and the entire organogenic process was analyzed using conventional histology, scanning and transmission electronic microscopy. Both direct and indirect regeneration modes were observed in hypocotyl explants, but only direct regeneration occurred in leaf-derived cultures. In the direct pathway from both explant types, meristemoids developed into globular structures, here called protuberances. The peripheral meristematic layers of the protuberances displayed ultrastructural characteristics indicative of a high metabolic activity, and only these cells originated shoots and leaf primordia, the latter being frequent when leaf explants were used. Moreover, the peripheral cells of the protuberances derived from leaf explants lost adhesion during the culture, diminishing the regeneration rates. We recommend the use of hypocotyls as a source of explant to obtain shoots as well as a genetic transformation system for the yellow passion fruit. However, the direct pathway is preferred because a type of amitosis occurred in the peripheral cells of hypocotyl-derived calli, which has the potential to result in genetic instability of the regenerating plants/tissue.

Shear bond strengths of a ceramic system to alternative metal alloys

Statement of problem. The success of metal-ceramic restorations is influenced by the compatibility between base metal alloys and porcelains. Although porcelain manufacturers recommend their own metal systems as the most compatible for fabricating metal-ceramic prostheses, a number of alloys have been used.Purpose. This study evaluated the shear bond strength between a porcelain system and 4 alternative alloys.Material and methods. Two Ni-Cr alloys: 4 ALL and Wiron 99, and 2 Co-Cr alloys: IPS d.SIGN 20 and Argeloy NP were selected for this study. The porcelain (IPS d.Sign porcelain system) portion of the cylindrical inetal-ceramic specimens was 4 mm thick and 4 mm high; the metal portion was machined to 4 x 4 mm, with a base that was 5 nun thick and 1 mm high. Forty-four specimens were prepared (n=11). Ten specimens from each group were subjected to a shear load oil a universal testing machine using a 1 min/min crosshead speed. One specimen from each group was observed with a scanning electron microscope. Stress at failure (MPa) was determined. The data were analyzed with a 1-way analysis of variance (alpha=.05).Results. The groups, all including IPS d.Sign porcelain, presented the following mean bond strengths (+/-SD) in MPa: 4 ALL, 54.0 +/- 20.0; Wiron, 63.0 +/- 13.5; IPS d.SIGN 20, 71.7 +/- 19.2; Argeloy NP, 55.2 +/- 13.5. No significant differences were found among the shear bond strength values for the metal-ceramic specimens tested.Conclusion. None of the base metal alloys studied demonstrated superior bond strength to the porcelain tested.

Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures

Statement of problem. Titanium has physical and mechanical properties, which have led to its increased use in dental prostheses despite casting difficulties due to high melting point and formation of oxide layers which affect the metal-ceramic bond strength.Purpose. This in vitro study evaluated the shear bond strength of the interface of 2 dental porcelains and pure titanium injected into a mold at 3 different temperatures.Material and methods. Using commercially pure (cp) titanium bars (Titanium, Grade I) melted at 1668degreesC and cast at mold temperatures of 430degreesC, 700degreesC or 900degreesC, 60 specimens were machined to 4 x 4 mm, with a base of 5 x 1 mm. The 4-mm surfaces were airborne-particle abraded with 100 mum aluminum oxide before applying and firing the bonding agent and evaluating the 2 porcelains (Triceram/Triline ti and Vita Titankeramik). Ten specimens were prepared for each temperature and porcelain combination Shear bond testing was performed in a universal testing machine, with a 500-kg load cell and crosshead speed of 0.5 mm/min. The specimens were loaded until failure. The interfaces of representative fractured specimens of each temperature were examined with a scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). Data for shear bond strength (MPa) were statistically analyzed by 2-way ANOVA and the Tukey test (alpha = .05).Results. The results showed significant differences for the metal/porcelain interaction effect (P = .0464). There were no significant differences for the 2 porcelains (P = .4250). The Tukey test showed a significant difference between the pair cp Ti 430degreesC Triceram and cp Ti 900degreesC Triceram, with respective mean values and SDs of 59.74 +/- 11.62 and 34.03 +/- 10.35 MPa.Conclusion. Triceram porcelain showed a bond strength decrease with an increase in the mold temperature for casting titanium. The highest bond strength for Vita porcelain and the best metal-ceramic interface observed with the SEM were found with the mold temperature of 700degreesC.

Localization and irregular distribution of Na,K-ATPase in myelin sheath from rat sciatic nerve

Sodium, potassium adenosine triphosphatase (Na,K-ATPase) is a membrane-bound enzyme that maintains the Na+ and K+ gradients used in the nervous system for generation and transmission of bioelectricity. Recently, its activity has also been demonstrated during nerve regeneration. The present study was undertaken to investigate the ultrastructural localization and distribution of Na,K-ATPase in peripheral nerve fibers. Small blocks of the sciatic nerves of male Wistar rats weighing 250-300g were excised, divided into two groups, and incubated with and without substrate, the para-nitrophenyl phosphate (pNPP). The material was processed for transmission electron microscopy, and the ultra-thin sections were examined in a Philips CNI 100 (TM) electron microscope. The deposits of reaction product were localized mainly on the axolemma, on axoplasmic profiles, and irregularly dispersed on the myelin sheath, but not in the unmyelinated axons. In the axonal membrane, the precipitates were regularly distributed on the cytoplasmic side. These results together with published data warrant further studies for the diagnosis and treatment of neuropathies with compromised Na,K-ATPase activity. (c) 2007 Elsevier Ltd. All rights reserved.