Proceedings of the eighth International Conference on Axiomatic Design (ICAD 2014)

ICAD2014, Campus de Caparica, Portugal

Technology transition towards electric mobility - technology assessment as a tool for policy design

Paper presented at the Colloquium Gerpisa 2013, Paris (http://gerpisa.org/node/2085), Session n°: 19 New kinds of mobility: old and new business models

Insights into the epidemiology of drug-resistant Streptococcus pneumoniae and closely-related streptococci in the era of conjugate vaccines

In Portugal, the introduction of the seven-valent pneumococcal conjugate vaccine (PCV7) has led to significant changes in the population structure of Streptococcus pneumoniae. However, the levels of antimicrobial resistance have not decreased and have been a matter of concern. (...)

Community-associated methicillin-resistant Staphylococcus aureus (CA-MRSA) in Portugal:

Methicillin-resistant Staphylococcus aureus (MRSA), a human pathogen confined to hospitals (HAMRSA) for over 30 years have been emerging worldwide in the last two decades as a leading cause of severe infections in healthy individuals in the community (CA-MRSA). Despite its clinical significance, in the beginning of our studies no information existed on the prevalence, and population structure of CA-MRSA in Portugal. Moreover, it remained to be clarified how CA-MRSA emerged in our country. In particular, it was not known if CA-MRSA emerged locally by acquisition of the staphylococcal cassette chromosome mec (SCCmec) by established methicillin-susceptible S. aureus (MSSA) in the community, if they were imported from abroad or have escaped from the hospital.(...)

Design e fabrico de novos eléctrodos impressos em papel para desenvolvimento de biossensores enzimáticos com aplicações biomédicas

Num mundo em crescente evolução é necessário tentar melhorar as condições de saúde global. Um factor importante para a prevenção e tratamento de doenças é o seu correcto diagnóstico. Uma vez que nem todos os países têm a mesma capacidade económica, existe a necessidade de se criar testes rápidos e baratos que possam ser acessíveis no mundo inteiro. Os point-of-care tests, como é o caso dos biossensores de glucose vastamente utilizados na monitorização da diabetes, apresentam uma solução para este problema. Os biossensores impressos em papel, em particular, são uma ferramenta que pode vir a ser muito útil na construção destes testes rápidos tornando-os mais “amigos do ambiente” e reduzindo os seus custos. O objectivo deste trabalho foi desenvolver biossensores enzimáticos, de segunda geração, impressos em papel e baseados na enzima glucose oxidase, para a detecção da glucose. Inicialmente foi feito um estudo de possíveis mediadores a utilizar, tendo-se escolhido o ferroceno por apresentar um limite de detecção adequado, ter apresentado um valor de potencial de redução relativamente baixo, 0.232 V vs pseudo ref. Ag/AgCl, ser um composto fácil de obter e com custos reduzidos. Os dispositivos baseiam-se em canais microfluídicos, eléctrodos e ligações eléctricas fabricadas em substrato de papel, utilizando as técnicas de impressão a cera, screen printing e inkjet printing. O circuito constituinte destes dispositivos foi feito recorrendo a tintas condutoras, sendo que, à tinta utilizada para o eléctrodo de trabalho foi incorporado o ferroceno. Sobre o eléctrodo de trabalho foi impressa glucose oxidase, utilizando a técnica de inkjet printing. Os eléctrodos fabricados apresentaram resposta à glucose, muito embora com baixa reprodutibilidade, podendo esta ser causada pela falta de controlo na preparação dos mesmos (manufactura manual e variabilidade da viscosidade da pasta usada no eléctrodo de trabalho). A técnica de inkjet printing em enzimas é ainda muito recente, existindo ainda alguns aspectos, como o seu efeito na actividade da enzima, que não foram avaliados neste projecto, mas que no futuro deverão ser estudados. Podemos concluir que, os eléctrodos deram uma resposta electroquímica consistente à adição de glucose, 8 mM- 30 mM, sendo que os mesmos foram reconhecidos no glucómetro comercial TRUETrackTM blood glucometer; no entanto, os valores de corrente dos dispositivos estavam abaixo do limite de detecção do instrumento.

Intrahospital spread of carbapenem-resistant Pseudomonas aeruginosa in a University Hospital in Florianópolis, Santa Catarina, Brazil

INTRODUCTION: Carbapenem-resistant Pseudomonas aeruginosa (CRPA) has been isolated with increasing frequency in Brazilian hospitals. Since June 2003, its detection in a teaching hospital in the city of Florianópolis, Brazil, has increased. This study aimed to investigate the minimal inhibitory concentration (MIC), presence of Metallo-β-lactamase (MβL) and a possible clonal relationship among the isolates. METHODS: The study included 29 CRPA and seven isolates with reduced susceptibility. The MIC was determined by agar-dilution. Detection of MβL was performed by Double Disk Sinergism (DDS) and Combined Disk (CD). The MβL gene was verified by PCR and nucleotide sequence analysis. Epidemiological typing was performed by pulsed-field gel electrophoresis. RESULTS: Among the 29 carbapenem-resistant isolates, polymyxin B presented 100% susceptibility and piperacillin/tazobactam 96.7%. Seventeen (62%) strains were verified as clonal (A clone) and among these, six isolates indicated phenotypically positive tests for MβL and harbored the blaSPM-1 gene. The first CRPA isolates were unrelated to clone A, harbored blaIMP-16 and were phenotypically positive only by CD. CONCLUSIONS: The spread of a high-level of resistance clone suggests cross transmission as an important dissemination mechanism and has contributed to the increased rate of resistance to carbapenems. This study emphasizes the need for continuous surveillance and improved strategies.

High prevalence of methicillin-resistant Staphylococcus aureus with SCCmec type III in cystic fibrosis patients in southern, Brazil

INTRODUCTION: Bacterial colonization of the lungs is the main cause of morbidity in cystic fibrosis (CF). Pathogens such as Staphylococcus aureus are very well adapted to the pulmonary environment and may persist for years in the same patient. Genetic determinants of these bacteria, such as the presence of SCCmec have recently emerged as a problem in this population of patients. METHODS: Staphylococcus aureus isolates obtained from different clinical materials coming from CF and non-CF patients attended at a cystic fibrosis reference hospital were compared according to SCCmec type and antibiotic susceptibility profile. RESULTS: Three hundred and sixty-four single-patient Staphylococcus aureus isolates were collected, of which 164 (45%) were from CF patients. Among the latter, 57/164 (44.5%) were MRSA, and among the non-CF patients, 89/200 (35%) were MRSA. Associated pathogens were found in 38 CF patients. All 57 MRSA from CF patients harbored the multiresistant cassette type III. In contrast, 31/89 MRSA from non-CF patients harbored SCCmec type I (35%) and 44/89 harbored type III (49%). The antibiotic susceptibility pattern was similar between CF and non-CF patients. CONCLUSIONS: The high prevalence of multiresistant SCCmec type III among CF patients compared with non-CF patients in our institution may make it difficult to control disease progression through antibiotic therapy for promoting the survival of this kind of patient.

Design of a CMOS amplifier for breast cancer detection

A transimpedance amplifier (TIA) is used, in radiation detectors like the positron emission tomography(PET), to transform the current pulse produced by a photo-sensitive device into an output voltage pulse with a desired amplitude and shape. The TIA must have the lowest noise possible to maximize the output. To achieve a low noise, a circuit topology is proposed where an auxiliary path is added to the feedback TIA input, In this auxiliary path a differential transconductance block is used to transform the node voltage in to a current, this current is then converted to a voltage pulse by a second feedback TIA complementary to the first one, with the same amplitude but 180º out of phase with the first feedback TIA. With this circuit the input signal of the TIA appears differential at the output, this is used to try an reduced the circuit noise. The circuit is tested with two different devices, the Avalanche photodiodes (APD) and the Silicon photomultiplier (SIPMs). From the simulations we find that when using s SIPM with Rx=20kΩ and Cx=50fF the signal to noise ratio is increased from 59 when using only one feedback TIA to 68.3 when we use an auxiliary path in conjunction with the feedback TIA. This values where achieved with a total power consumption of 4.82mv. While the signal to noise ratio in the case of the SIPM is increased with some penalty in power consumption.

American cutaneous leishmaniasis caused by Leishmania (Viannia) braziliensis resistant to meglumine antimoniate, but with good response to pentamidine: a case report

This is a case report of a Brazilian soldier with cutaneous leishmaniasis. The lesion relapsed following two systemic treatments with meglumine antimoniate. The patient was treated with amphotericin B, which was interrupted due to poor tolerance. Following isolation of Leishmania sp., six intralesional infiltrations of meglumine antimoniate resulted in no response. Leishmania sp promastigotes were again isolated. The patient was submitted to intramuscular 4mg/kg pentamidine. Parasites from the first and second biopsies were identified as Leishmania (Viannia) braziliensis; those isolated from the first biopsy were more sensitive to meglumine antimoniate in vitro than those isolated from the second biopsy. No relapse was observed.

Design of a low-voltage CMOS RF receiver for energy harvesting sensor node

In this thesis a CMOS low-power and low-voltage RF receiver front-end is presented. The main objective is to design this RF receiver so that it can be powered by a piezoelectric energy harvesting power source, included in a Wireless Sensor Node application. For this type of applications the major requirements are: the low-power and low-voltage operation, the reduced area and cost and the simplicity of the architecture. The system key blocks are the LNA and the mixer, which are studied and optimized with greater detail, achieving a good linearity, a wideband operation and a reduced introduction of noise. A wideband balun LNA with noise and distortion cancelling is designed to work at a 0.6 V supply voltage, in conjunction with a double-balanced passive mixer and subsequent TIA block. The passive mixer operates in current mode, allowing a minimal introduction of voltage noise and a good linearity. The receiver analog front-end has a total voltage conversion gain of 31.5 dB, a 0.1 - 4.3 GHz bandwidth, an IIP3 value of -1.35 dBm, and a noise figure lower than 9 dB. The total power consumption is 1.9 mW and the die area is 305x134.5 m2, using a standard 130 nm CMOS technology.

Community prevalence of methicillin and vancomycin resistant Staphylococcus aureus in and around Bangalore, southern India

INTRODUCTION: Staphylococcus aureus is a known colonizer in humans and has been implicated in community acquired soft tissue infections. However emergence of methicillin resistant S. aureus (MRSA) has aroused great concern worldwide. This study aimed to determine the prevalence of MRSA in the community of Bangalore, southern India. METHODS: Swabs were collected from anterior nares, forearm, dorsum and palm of the hands of 1,000 healthy individuals residing in and around Bangalore, belonging to different socioeconomic strata and age groups. RESULTS: Analysis verified that 22.5% and 16.6% of the individuals presented Staphylococcus aureus and MRSA, respectively, at any of the three sites. Vancomycin resistance was observed in 1.4% of the S. aureus isolates, which was confirmed by detection of the vanA gene. It was interesting to note that 58.8% of the children in the age group 1-5 years-old presented MRSA, the highest percentage compared to other age groups of < 1 (44.4%) year-old, 5-20 (21.7%) years-old, > 40 (11%) years-old and 20-40 (9.9%) years-old. Among the population of various socioeconomic strata, maximum MRSA colonization was observed among doctors (22.2%), followed by upper economic class (18.8%), lower economic class (17.7%), apparently healthy hospital in-patients (16.5%), nurses (16%) and middle economic class (12.5%). Most of the MRSA isolates were capsular polysaccharide antigen type 8 (57.1%). CONCLUSIONS: There is a need for continuous surveillance and monitoring of the presence of MRSA in the community and a clearer understanding of the dynamics of the spread of MRSA will assist in controlling its dissemination.

Design, implementation, and performance of a distributed and scalable sensor system for critical distance measurements in the CMS detector at LHC

The “CMS Safety Closing Sensors System” (SCSS, or CSS for brevity) is a remote monitoring system design to control safety clearance and tight mechanical movements of parts of the CMS detector, especially during CMS assembly phases. We present the different systems that makes SCSS: its sensor technologies, the readout system, the data acquisition and control software. We also report on calibration and installation details, which determine the resolution and limits of the system. We present as well our experience from the operation of the system and the analysis of the data collected since 2008. Special emphasis is given to study positioning reproducibility during detector assembly and understanding how the magnetic fields influence the detector structure.

Bioprocess design of canine adenovirus vectors for gene therapy applications

The potential of human adenovirus vectors as vehicles for gene transfer with clinical applications in vaccination, cancer treatment and in many monogenic and acquired diseases has been demonstrated in several studies and clinical trials. However, the clinical use of these vectors can be limited by pre-existing humoral and cellular anti-capsid immunity. One way to circumvent this bottleneck while keeping the advantages of using adenovirus vectors is using non-human viruses such as Canine Adenovirus type 2 (CAV-2). Moreover, CAV-2 vectors present attractive features to develop potential treatment of neurodegenerative and ocular disorders. While the interest in CAV-2 vectors increases, scalable and robust production processes are required to meet the need for preclinical and possibly clinical uses.(...)

Prevalence and clinical outcomes of episodes of ventilator-associated pneumonia caused by SPM-1-producing and non-producing imipenem-resistant Pseudomonas aeruginosa

INTRODUCTION: Pseudomonas aeruginosa is a leading cause of ventilator-associated pneumonia (VAP) and exhibits high rates of resistance to several antimicrobial drugs. The carbapenens are usually the drugs of choice against this microorganism. However, the carbapenem resistance has increased among these strains worldwide. The presence of metallo-β-lactamases (MBL) has been pointed out as a major mechanism of resistance among these strains. No previous study addressed outcomes of respiratory infections caused by these strains. METHODS: Our group sought to analyze the epidemiology and clinical outcomes of patients with VAP caused by imipenem-resistant P. aeruginosa. A total of 29 clinical isolates of carbapenem-resistant Pseudomonas aeruginosa were screened for metallo-β-lactamase (MBL) genes. RESULTS: Demographic and clinical variables were similar between the SPM-1-producing and non-SPM-1-producing group. Five (17.2%) isolates were positive for blaSPM-1. No other MBL gene was found. All patients were treated with polymyxin B. The infection-related mortality was 40% and 54.2% for SPM-1-producing and -non-producing isolates, respectively. CONCLUSIONS: There were no differences in epidemiological and clinical outcomes between the two groups.

Molecular analysis and dimorphism of azole-susceptible and resistant Candida albicans isolates

INTRODUCTION: Candida albicans is responsible for superficial or systemic infections known as candidiasis, which may be found in infected tissue as unicellular budding yeasts, hyphae, or pseudohyphae. In this study, the effects of both fluconazole and itraconazole antifungal agents on the hyphal formation and genotypic characterization of C. albicans isolates classified as either susceptible or resistant were investigated. METHODS: The hyphal production of five C. albicans isolates under the action of antifungal agents was investigated by culturing yeast on growth medium and on hyphal induction medium. The genotypic characterization was carried out for 13 isolates of C. albicans using the random amplified polymorphic DNA-polymerase chain reaction (RAPD-PCR) method. RESULTS: The dimorphism analysis showed that the hyphal formation was higher in resistant than in the susceptible isolates to both azoles. The RAPD-PCR method identified the formation of two different groups. In group A, four resistant and two susceptible isolates were clustered, and in group B, one resistant and six susceptible isolates were clustered. CONCLUSIONS: Considering that hyphal formation was higher in resistant isolates in the presence of azole drugs, we confirmed that the hyphal production is closely related to susceptibility to azoles. These drugs may affect the morphogenesis of C. albicans depending on their susceptibility to these drugs. In relation to RAPD-PCR, most resistant isolates classified in group A and susceptible isolates in group B demonstrated that this method presented a similar standard between the two groups, suggesting that by this technique, a strong correlation between genotypes and fluconazole-resistant samples may be found.