Introduction of a non-conventional solution for Amazon transmission system: Analysis of the electric aspects

This article shows an analysis of the longitudinal electric parameters of a three-phase transmission line/section using a 280-meter high steel tower. This characteristic, the height of the line conductors and distance between them, are intrinsic related to the longitudinal and transversal parameters of the line. By this means, an accurate study was carried out in order to show the electric variations between a transmission line using the new technology and a three-phase conventional 440 kV line for a wide range of frequencies and a variable soil resistivity. In addition, by using a digital line model, simulations are carried out in time domain to analyze critical overvoltage transients on the studied line. © 2011 IEEE.

Healing outcomes at implants installed in sites augmented with particulate autologous bone and xenografts. An experimental study in dogs

Aim: To evaluate the integration of implants installed at the interface of pristine and grafted tissue augmented with particulate autologous bone or deproteinized bovine bone mineral (DBBM), concomitantly with a collagen membrane. Material and methods: In 6 Labrador dogs, the distal root of 3P3 and 4P4 was endodontically treated and hemi-sected, and the mesial roots extracted concomitantly with the extraction of 2P2. The buccal bony walls were removed, and two box-shaped defects, one larger and one smaller, were created. After 3 months, flaps were elevated, and the defects were filled with particulate autologous bone or DBBM in the right and left side of the mandible, respectively. Collagen membranes were used to cover the grafted areas. Three months later, flaps were elevated, and a customized device was used as surgical guide to prepare the recipient sites at the interface between grafts and pristine bone. One implant was installed in each of the four defects. After 3 months, biopsies were harvested and ground sections prepared for histological evaluation. Results: The augmentation technique was effective at all sites and all the foreseen implants were installed. In the histological analysis, all implants were integrated in mature bone, at both the buccal and lingual aspects. The most coronal bone-to-implant contact and the top of the buccal bony crest were located at a similar distance between test and control implants. However, these distances were higher at the larger compared with the smaller defects. Especially in the large defect, residual particles of DBBM were found embedded into connective tissue and located outside the bony crest. Conclusions: Particulate autologous bone as well as DBBM particles used to augment horizontally the alveolar bony process allowed for the osseointegration of implants installed after 3 months of healing. © 2012 John Wiley & Sons A/S.

Economic performance clubs in the Americas: 1955-2003

Includes bibliography

Modelling fungus dispersal scenarios using cellular automata

This study focused on representing spatio-temporal patterns of fungal dispersal using cellular automata. Square lattices were used, with each site representing a host for a hypothetical fungus population. Four possible host states were allowed: resistant, permissive, latent or infectious. In this model, the probability of infection for each of the healthy states (permissive or resistant) in a time step was determined as a function of the host's susceptibility, seasonality, and the number of infectious sites and the distance between them. It was also assumed that infected sites become infectious after a pre-specified latency period, and that recovery is not possible. Several scenarios were simulated to understand the contribution of the model's parameters and the spatial structure on the dynamic behaviour of the modelling system. The model showed good capability for representing the spatio-temporal pattern of fungus dispersal over planar surfaces. With a specific problem in mind, the model can be easily modified and used to describe field behaviour, which can contribute to the conservation and development of management strategies for both natural and agricultural systems. © 2012 Elsevier B.V.

Morphological and molecular evidence for two new species of Tetragonopterus (Characiformes: Characidae) from central Brazil

The combination of morphological and molecular data of Tetragonopterus species collected in the Rio Araguaia basin allows the recognition of two undescribed species that are presented in this article. These species are distinguished from their congeners (Tetragonopterus anostomus, Tetragonopterus argenteus, Tetragonopterus carvalhoi, Tetragonopterus chalceus and Tetragonopterus rarus) by characters related to the number and morphology of the teeth, the numbers of gill rakers on the upper and lower limbs of the first gill arch, the number of predorsal scales and the overall colour pattern. In addition, the analysis of mitochondrial DNA sequences identified an accentuated genetic distance between these two new species and their congeners. A discussion of the phylogenetic relationships within Tetragonopterus is provided. © 2013 The Authors. Journal of Fish Biology © 2013 The Fisheries Society of the British Isles.

Study of whole genome linkage disequilibrium in Nellore cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modeling Habitat Split: Landscape and Life History Traits Determine Amphibian Extinction Thresholds

Habitat split is a major force behind the worldwide decline of amphibian populations, causing community change in richness and species composition. In fragmented landscapes, natural remnants, the terrestrial habitat of the adults, are frequently separated from streams, the aquatic habitat of the larvae. An important question is how this landscape configuration affects population levels and if it can drive species to extinction locally. Here, we put forward the first theoretical model on habitat split which is particularly concerned on how split distance - the distance between the two required habitats - affects population size and persistence in isolated fragments. Our diffusive model shows that habitat split alone is able to generate extinction thresholds. Fragments occurring between the aquatic habitat and a given critical split distance are expected to hold viable populations, while fragments located farther away are expected to be unoccupied. Species with higher reproductive success and higher diffusion rate of post-metamorphic youngs are expected to have farther critical split distances. Furthermore, the model indicates that negative effects of habitat split are poorly compensated by positive effects of fragment size. The habitat split model improves our understanding about spatially structured populations and has relevant implications for landscape design for conservation. It puts on a firm theoretical basis the relation between habitat split and the decline of amphibian populations. © 2013 Fonseca et al.

Local and regional ecological drivers of fish assemblages in Brazilian estuaries

Spatial patterns in assemblage structures are generated by ecological processes that occur on multiple scales. Identifying these processes is important for the prediction of impact, for restoration and for conservation of biodiversity. This study used a hierarchical sampling design to quantify variations in assemblage structures of Brazilian estuarine fish across 2 spatial scales and to reveal the ecological processes underlying the patterns observed. Eight areas separated by 0.7 to 25 km (local scale) were sampled in 5 estuaries separated by 970 to 6000 km (regional scale) along the coast, encompassing both tropical and subtropical regions. The assemblage structure varied significantly in terms of relative biomass and presence/absence of species on both scales, but the regional variation was greater than the local variation for either dataset. However, the 5 estuaries sampled segregated into 2 major groups largely congruent with the Brazilian and Argentinian biogeographic provinces. Three environmental variables (mean temperature of the coldest month, mangrove area and mean annual precipitation) and distance between estuaries explained 44.8 and 16.3%, respectively, of the regional-scale variability in the species relative biomass. At the local scale, the importance of environmental predictors for the spatial structure of the assemblages differed between estuarine systems. Overall, these results support the idea that on a regional scale, the composition of fish assemblages is simultaneously determined by environmental filters and species dispersal capacity, while on a local scale, the effect of environmental factors should vary depending on estuary-specific physical and hydrological characteristics © 2013 Inter-Research.

Spatial distribution and architecture of acromyrmex landolti forel (Hymenoptera, Formicidae) nests in pastures of Southwestern Bahia, Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Periodic compression of an adiabatic gas: Intermittency-enhanced Fermi acceleration

A gas of non-interacting particles diffuses in a lattice of pulsating scatterers. In the finite-horizon case with bounded distance between collisions and strongly chaotic dynamics, the velocity growth (Fermi acceleration) is well described by a master equation, leading to an asymptotic universal non-Maxwellian velocity distribution scaling as v∼t. The infinite-horizon case has intermittent dynamics which enhances the acceleration, leading to v∼t ln t and a non-universal distribution. © Copyright EPLA, 2013.

Indirect georeferencing of terrestrial laser scanning data using control lines

An indirect method for the georeferencing of 3D point clouds obtained with terrestrial laser scanning (TLS) data using control lines is presented. This technique could be used for rapid data acquisition where resources do not permit the use of expensive navigation sensors or the placement of pre-signalised targets. The most important characteristic is the development of a mathematical model based on the principle that the direction vector of the TLS straight line is coplanar with the plane defined by the origin of the TLS system, one endpoint of a control line and the direction vector of the control line in the ground reference coordinate system. The transformation parameters are estimated by minimising the distance between the control lines and their corresponding TLS straight lines. The proposed method was tested using both simulated and real data, and the advantages of this new approach are compared with conventional surveying methods. © 2013 This article is a U.S. Government work and is in the public domain in the USA.

Comparative study of the life cycle assessment of particleboards made of residues from sugarcane bagasse (Saccharum spp.) and pine wood shavings (Pinus elliottii)

This paper presents a research on the environmental impacts of particleboards produced from wastes, based on a comparative Life Cycle Assessment study. The particleboards were manufactured in laboratorial scale from the following residues: sugarcane bagasse (Saccharum spp.) and pine wood shavings (Pinus elliottii). The study was developed following the methodological guidelines of ISO 14040. The functional unit adopted was the m2 of the particleboards produced and the impacts were evaluated by the Environmental Development of Industrial Products method. The results indicated that pine particleboard present the highest environmental impact potential. Our findings suggested that the factors that mostly aggravated the environmental impacts were: the distance between the raw materials and the production site, and formaldehyde emissions (FE). The first is related to the combustion of fossil fuel during the acquisition of raw material, which achieved the values of 2185.94 g/m2 for consumption of non-renewable resources for pine particleboard and 893.53 g/m2 for bagasse particleboard. The second is related to the use of urea-formaldehyde resin, responsible for the FE into the air during production. The FE is accountable for the contamination of approximately 7,800,000.00 m3 of air per m2 of particleboard produced, and was the factor with the greatest impact in human toxicity potential. © 2013 Elsevier Ltd. All rights reserved.

Características morfofisiológicas e agrupamento genético de cana-de-açúcar sob deficiência hídrica

Pós-graduação em Agronomia (Agricultura) - FCA

Esterilização de materiais termossensíveis através de aplicação de plasma gerado por descarga com barreira dielétrica (DBD)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Integridade, disponibilidade e acurácia no posicionamento RTK e RTK em rede: Investigação no contexto da rede GNSS ativa do Estado de São Paulo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)