溶蚀岩体渗透水力学特性研究

Seepage control in karstic rock masses is one of the most important problems in domestic hydroelectric engineering and mining engineering as well as traffic engineering. At present permeability assessment and leakage analysis of multi-layer karstic rock masses are mainly qualitative, while seldom quantitative. Quantitative analyses of the permeability coefficient and seepage amount are conducted in this report, which will provide a theoretical basis for the study of seepage law and seepage control treatment of karstic rocks. Based on the field measurements in the horizontal grouting galleries of seepage control curtains on the left bank of the Shuibuya Hydropower Project on the Qingjiang river, a hydraulic model is established in this report, and the computation results will provide a scientific basis for optimization of grouting curtain engineering. Following issues are addressed in the report. (1) Based on the in-situ measurements of fissures and karstic cavities in grouting galleries, the characteristics of karstic rock mass is analyzed, and a stochastic structural model of karstic rock masses is set up, which will provide the basis for calculation of the permeability and leakage amount of karstic rock mass. (2) According to the distribution of the measured joints in the grouting galleries and the stochastic results obtained from the stochastic structural model of karstic rock mass between grouting galleries, a formula for computation of permeability tensor of fracturing system is set up, and a computation program is made with Visual Basic language. The computation results will be helpful for zoning of fissured rock masses and calculation of seepage amount as well as optimization of seepage control curtains. (3) Fractal theory is used to describe quantitatively the roughness of conduit walls of karstic systems and the sinuosity of karstic conduits. It is proposed that the roughness coefficient of kastic caves can be expressed by both fractal dimension Ds and Dr that represent respectively the extension sinuosity of karstic caves and the roughness of the conduit walls. The existing formula for calculating the seepage amount of karstic conduits is revised and programmed. The seepage amount of rock masses in the measured grouting galleries is estimated under the condition that no seepage control measures are taken before reservoir impoundment, and the results will be helpful for design and construction optimization of seepage curtains of the Shuibuya hydropower project. This report is one part of the subject "Karstic hydrogeology and the structural model and seepage hydraulics of karstic rock masses", a sub-program of "Study on seepage hydraulics of multi-layer karstic rock masses and its application in seepage control curtain engineering", which is financially supported by the Hubei Provincial key science and technology programme.

Data Reduction with Rough Sets

R. Jensen, Q. Shen, Data Reduction with Rough Sets, In: Encyclopedia of Data Warehousing and Mining - 2nd Edition, Vol. II, 2008.

Characterisation of weldpool shapes in the laser welding of thick plates

We consider the problem of finding the heat distribution and the shape of the liquid fraction during laser welding of a thick steel plate using the finite volume CFD package PHYSICA. Since the shape of the keyhole is not known in advance, the following two-step approach to handling this problem has been employed. In the first stage, we determine the geometry of the keyhole for the steady-state case and form an appropriate mesh that includes both the workpiece and the keyhole. In the second stage, we impose the boundary conditions by assigning temperature to the walls of the keyhole and find the heat distribution and the shape of the liquid fraction for a given welding speed and material properties. We construct a fairly accurate approximation of the keyhole as a sequence of include sliced cones. A formula for finding the initial radius of the keyhole is derived by determining the radius of the vaporisation isotherm for the line heat source. We report on the results of a series of computational experiments for various heat input values and welding velocities.

Identification of dyes on ancient Chinese paper samples using the subtracted shifted Raman spectroscopy method

The Stein Collection in the British Library contains the Diamond Sutra, the world's oldest, dated, printed document. The paper of the Diamond Sutra and other documents from the Stein collection is believed to be dyed yellow by a natural extract, called huangbo, from the bark of Phellodendron amurense, which contains three major yellow chromophores: berberine, palmatine, and jatrorrhizine, Conservation of these documents requires definite information on the chemical composition of the dyes but no suitable, completely noninvasive analytical method is known. Here we report resonance Raman studies of a series of prate dyes, of plant materials and extracts, and of dyed ancient and modern paper samples. Resonance Raman spectroscopy is used to enhance the spectra of the dyes over the signals from the paper matrixes in which they are held. The samples an give resonance Raman spectra which are dominated by intense fluorescence, but by using SSRS (subtracted shifted Raman spectroscopy) we have obtained reliable spectra of the pure dyes, native bark from the Phellodendron amurense, modern paper dyed with huangbo extracted from this bark, and ancient paper samples. For both ancient paper samples whose pigment bands were detected, the relative intensities of the bands due to berberine and palmatine suggest that the ancient paper is richer in berberine than its modern counterpart, This is the first nondestructive in situ method for detection of these pigments in manuscripts, and as such has considerable potential benefit for the treatment of irreplaceable documents that are believed to be dyed with huangbo but documents on which conservation work cannot proceed without definite identification of the chemical compounds that they contain.

Influence of microstructure on the cutting behaviour of silicon

We use molecular dynamics simulation to study the mechanisms of plasticity during cutting of monocrystalline and polycrystalline silicon. Three scenarios are considered: (i) cutting a single crystal silicon workpiece with a single crystal diamond tool, (ii) cutting a polysilicon workpiece with a single crystal diamond tool, and (iii) cutting a single crystal silicon workpiece with a polycrystalline diamond tool. A long-range analytical bond order potential is used in the simulations, providing a more accurate picture of the atomic-scale mechanisms of brittle fracture, ductile plasticity, and structural changes in silicon. The MD simulation results show a unique phenomenon of brittle cracking typically inclined at an angle of 45° to 55° to the cut surface, leading to the formation of periodic arrays of nanogrooves in monocrystalline silicon, which is a new insight into previously published results. Furthermore, during cutting, silicon is found to undergo solid-state directional amorphisation without prior Si-I to Si-II (beta tin) transformation, which is in direct contrast to many previously published MD studies on this topic. Our simulations also predict that the propensity for amorphisation is significantly higher in single crystal silicon than in polysilicon, signifying that grain boundaries eases the material removal process.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

A critical narrative analysis of shared decision-making in acute, inpatient mental health care

Shared decision-making (SDM) is a high priority in healthcare policy and is complementary to the recovery philosophy in mental health care. This agenda has been operationalised within the Values-Based Practice (VBP) framework, which offers a theoretical and practical model to promote democratic interprofessional approaches to decision-making. However, these are limited by a lack of recognition of the implications of power implicit within the mental health system. This study considers issues of power within the context of decision-making and examines to what extent decisions about patients? care on acute in-patient wards are perceived to be shared. Focus groups were conducted with 46 mental health professionals, service users, and carers. The data were analysed using the framework of critical narrative analysis (CNA). The findings of the study suggested each group constructed different identity positions, which placed them as inside or outside of the decision-making process. This reflected their view of themselves as best placed to influence a decision on behalf of the service user. In conclusion, the discourse of VBP and SDM needs to take account of how differentials of power and the positioning of speakers affect the context in which decisions take place.

Role of abrasive material on micro-abrasion wear tests

Micro-abrasion wear tests with ball-cratering configuration are widely used. Sources of variability are already studied by different authors and conditions for testing are parameterized by BS EN 1071-6: 2007 standard which refers silicon carbide as abrasive. However, the use of other abrasives is possible and allowed. In this work, ball-cratering wear tests were performed using four different abrasive particles of three dissimilar materials: diamond, alumina and silicon carbide. Tests were carried out under the same conditions on a steel plate provided with TiB2 hard coating. For each abrasive, five different test durations were used allowing understanding the initial wear phenomena. Composition and shape of abrasive particles were investigated by SEM and EDS. Scar areas were observed by optical and electronic microscopy in order to understand the wear effects caused by each of them. Scar geometry and grooves were analyzed and compared. Wear coefficient was calculated for each situation. It was observed that diamond particles produce well-defined and circular wear scars. Different silicon carbide particles presented dissimilar results as consequence of distinct particle shape and size distribution.

J.W. Spencer fonds, 1866, 1881-1921

Joseph William Winthrop Spencer (commonly known as J.W. Spencer) was a geologist and geomorphologist best known for his work on the geology of southern Ontario and the Great Lakes. He was born in Dundas, Upper Canada in 1851, but moved to Hamilton, Ontario in 1867. In 1871, he began studies in geology at McGill College in Montreal. In 1875 he worked in the Michigan copper mines and shortly afterwards prepared a thesis on the copper deposits. He submitted this thesis to the University of Gottingen in Germany in 1877 and was awarded a doctorate in geology, the second Canadian to earn a doctorate in this field. In 1880, he became a professor of geology and chemistry at King’s College in Windsor, N.S. Subsequently, he taught at the University of Missouri, and then the University of Georgia, but moved to Washington, D.C. in 1894, where he worked as a consultant geologist. Spencer spent much of his life studying preglacial river valleys in Ontario and the origins of the Great Lakes, as well as the Niagara River and Falls. In 1907, he published a book titled The Falls of Niagara: their evolution and varying relations to the Great Lakes. His opinions in these areas differed from some of his contemporaries, namely the American geologist Grove Karl Gilbert. Gilbert published a review of the The Falls of Niagara that exposed some flaws and inaccuracies in Spencer’s estimate of the age of the falls. Spencer’s studies also took him to the Caribbean and Central America. In 1920 he moved back to Canada, but died the following year.

Sorority Pin

A sorority pin of Margaret Julia Woodruff (Band). It is diamond shaped and it has a pearl like border around the outside.

Receipt from J.B. Fowler for clocks

Receipt from J.B. Fowler for clocks, March 5, 1887.

Intégration de la pensée cycle de vie aux études d'impacts : cas du site minier Raglan

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

Von den Markenteilungen bis zum Emscher Landschaftspark: Freiraumverluste und Freiraumschutz im Ruhrgebiet

In der vorliegenden Arbeit werden die Erfolge und Misserfolge der Freiraumpolitik im Ruhrgebiet untersucht. Ausgangspunkte sind der Freiraumschwund, der über einen Zeitraum von fast 200 Jahren dokumentiert wird, sowie die Gegenbewegungen, die sich für den Freiraumschutz einsetzen. Nach der Vorstellung einer Freiraumtypologie werden diese Entwicklungen in detaillierten historischen Abrissen für jeden Freiraumtyp dargestellt, woraus sich eine eigene Ruhrgebietsgeschichte - aus der Perspektive der Freiflächen und ihrer Nutzer - ergibt. Folgerichtig beginnt die vorliegende Arbeit nicht mit Kohle und Eisen, sondern mit der Land- und Forstwirtschaft. Anhand historischer Quellen wird die gängige Am-Anfang-war-die-Heide-These widerlegt, denn das Ruhrgebiet war waldreich und ein produktiver Agrarraum. Landwirtschaftliche Flächen- und Waldverluste sind die Basis der Siedlungstätigkeit. Ohne die Gemeinheitsteilungen im 19. Jahrhundert wären die Stadterweiterungen und Industrieansiedlungen im Ruhrgebiet nicht möglich gewesen. Die - in Grundzügen im Ersten Weltkrieg entwickelte - Agrarpolitik mit der Förderung von Produktivitätssteigerungen und Hofaufgaben erleichterte den weiteren Entzug von Agrarflächen, und genauso wirkt heute die Liberalisierung der Agrarmärkte. Alternative Ansätze (z.B. Direktvermarktung) konnten diesen Trend noch nicht aufhalten. Auch das Baumschutzgesetz von 1922 konnte die nationalsozialistischen Kahlschläge, die Waldverluste im Zweiten Weltkrieg und durch den Wiederaufbau nicht verhindern. Erst seit der Deindustrialisierung, der Aufforstung von Halden und der Umweltbewegung nehmen Wälder wieder zu. Demgegenüber treten Ende des 19. Jahrhunderts völlig neue Freiraumtypen auf. Die bürgerschaftliche Kleingartenbewegung wurde dank ihrer Bedeutung für die Ernährung in den Städten seit dem Ersten Weltkrieg vom Staat stark unterstützt, von den Nationalsozialisten gleichgeschaltet, konnte aber in den 1950er Jahren ihren bürgerschaftlichen Charakter und ihre Stärke wieder zurückgewinnen. Auch wenn Kleingärten als bauliche Reserveflächen missbraucht werden, geschieht dies nicht mehr ohne Ersatzland. Im Unterschied hierzu wurde die Stadtparkbewegung kommunalisiert. Sodann entstanden Volksparks mit Sportanlagen, ästhetisch ausgerichtete Gartenschauen, die breit gefächerten Revierparks der 1970er Jahre und neue Parktypen im Emscher Landschaftspark. 1920 wird der Siedlungsverband Ruhrkohlenbezirk gegründet, der mit den Verbandsgrünflächen ein eigenes Instrument zum Freiraumschutz und die Kompetenz zur Fluchtlinien- bzw. Bebauungsplanung erhielt. Inzwischen darf der Verband, vor einigen Jahren in den Regionalverband Ruhr umgewandelt, zu kommunalen Planungen nur noch Stellungnahmen abgeben. Schon früh versuchte der Verband, industrielles Ödland zu begrünen. Nach den Bahndammbegrünungen vor dem Zweiten Weltkrieg hat er seit den 1950er Jahren Halden aufgeforstet, bis in den 1990er Jahren der Aufbau des Emscher Landschaftsparks begann. Zechen- und Industriebrachen werden in neue Parks, Halden und Mülldeponien in Landmarken und Freizeitlandschaften verwandelt. Zu fragen ist, was aus diesen Geschichten für die Freiraumpolitik folgt. Zwei gegensätzliche Thesen werden diskutiert: die Tragedy of the Commons, die im Gemeineigentum die Ursache ökologischer Probleme sieht, während der Common-Property-Ansatz gerade in gemeinschaftlichen Nutzungen einen Ansatz für Problemlösungen sieht. Dabei liegt eine Besonderheit von Freiräumen in ihrem hohen Öffentlichkeitsgrad, d.h. dass sie von vielen Menschen genutzt werden und gleichzeitig mehrere, z.B. produktive, ökologische, politische oder berufliche Funktionen erfüllen. Untersucht wird, inwieweit erfolgreich gesicherte Freiflächen Merkmale von stabilen Common-Property-Institutionen tragen, d.h. welche Funktionen die Freiräume erfüllen, wie ihre Nutzung geregelt ist und vor allem welchen Einfluss die Nutzer auf Entscheidungen haben. Thesenhaft lässt sich zusammenfassen, dass ein Teil der Freiräume sein Wachstum einer derzeit unverzichtbaren Funktion verdankt, nämlich der Camouflage von Müll und Altlasten, die eine bauliche Nutzung ausschließen. Andere Freiräume verdanken ihren Bestand ihren vielfältigen Nutzungen, zur Erholung, durch Denkmäler, für Veranstaltungen, aber auch der Wertsteigerung für umliegende Wohngebiete. Ein kleiner Teil der Freiräume hat tatsächlich einen Common-Property-Charakter: Kleingartenanlagen, die von bürgerschaftlichen Gruppen gegründeten Parks sowie die Flächen, die durch Bürgerinitiativen o.ä. gegen eine bauliche Umnutzung verteidigt werden. Grund genug, um die Idee eines Netzwerks von Parkvereinen aufzugreifen, die sich von bürgerschaftlicher Seite aus für Freiräume einsetzen können.