963 resultados para Deyeuxia Clarion ex Beauv.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV
Resumo:
Background. Methods for determining the root canal length of the primary tooth should yield accurate and reproducible results. In vitro studies show some limitations, which do not allow their findings to be directly transferred to a clinical situation. Aim. To compare the accuracy of radiographic tooth length obtained from in vivo digital radiograph with that obtained from ex vivo digital radiograph. Method. Direct digital radiographs of 20 upper primary incisors were performed in teeth (2/3 radicular resorption) that were radiographed by an intraoral sensor, according to the long-cone technique. Teeth were extracted, measured, and mounted in a resin block, and then radiographic template was used to standardise the sensor-target distance (30 cm). The apparent tooth length (APTL) was obtained from the computer screen by means of an electronic ruler accompanying the digital radiography software (CDR 2.0), whereas the actual tooth length (ACTL) was obtained by means of a digital calliper following extraction. Data were compared to the ACTL by variance analysis and Pearson’s correlation test. Results. The values for APTL obtained from in vivo radiography were slightly underestimated, whereas those values obtained from ex vivo were slightly overestimated. No significance was observed between APTL and ACTL. Conclusion. The length of primary teeth estimated by in vivo and ex vivo comparisons using digital radiography was found to be similar to the actual tooth length.
Resumo:
Introduction: The radiographic characteristics of a biomaterial, such as its density, may influence the evaluation of the results obtained following its clinical use. Objective: The aim of this study was to evaluate the radiographic density of biomaterials used as bone substitutes, inserted into dental sockets and bone defects in created in the jaws of pigs. The influence of a soft tissue simulator on the results was also evaluated. Material and method: Two and three-millimeter-deep bone defects were created in the pigs mandible and the right first molar extraction socket were used. Commercial samples of five biomaterials were tested: Hydroxyapatite, Lyophilized Bovine Bone, 45S5 bioglass (generic), PerioGlass and β-Tri-Calcium Phosphate, and compared to a positive (mandibular bone) and negative (empty alveolar bone defects) controls. Radiographic images were acquired with and without a 10 mm thick soft-tissue simulator. Result: The results for the extraction sockets showed no differences between the biomaterials and the negative control. For the bone defects, the depth of the defect density influenced the density, both in the negative control (p < 0.01) and biomaterials (p < 0.05) groups. The soft- tissue simulator did not alter the results. Conclusion: The type of the evaluated defect can interfere in the radiographic features presented by each biomaterial, while the simulation of soft tissues was not statistically significant.
Resumo:
The main objective of this work was to mount and test an experimental model to measure the hydraulic conductance of ex vivo dentin. Seventeen healthy third molars, with indication of extraction of healthy donors aged between 15 and 30 years were obtained by informed consent. After cleaning them, disinfecting them, including them in resin epoxy and cutting them, there were 17 samples of dentin, corresponding to a disk of resin with a coronal section of tooth showing the dentin exposed on both sides of it. Three machines to measure the hydraulic conductance of the dentin were assembled according to the description of the model of Pashley. Samples were installed in a Chamber of diffusion, connected by using silicone tubes to a graduated transfer pipette and a 20cm water column. Through the displacement of a bubble of water in the inside of the pipette, the hydraulic conductance of each sample was measured 3 times on the 14th, 21st, 28th and 35th day post extraction. The data were tabulated and analyzed statistically. There is no SS difference in the rate of flow of a measured sample in the three machines (p=0.5937). There is no SS difference in measurements of the hydraulic conductance of 13 samples of human dentin measured in days 14, 21, 28 and 35 postextraction (p=0.0704). It is possible to mount an experimental model to study the hydraulic conductance of dentin ex vivo, based on the model of Pashley. The model seems to be reliable, but more research is needed in order to validate its reliability.
Resumo:
In Brazil, Eucalyptus grandis Hill ex Maiden is widely used for commercial reforestation, especially for production of pulp, paper and energy. Its genetic variability is being explored in tree improvement programs for over 30 years. The objective of this work was to estimate genetic parameters and compare genetic gains by multi-effects index in a breeding population of E. grandis. Progeny tests were established using open-pollinated seeds from ten provenances ranging from 153 to 160 progenies established in a completely randomized block design in four sites of Sao Paulo State (Anhembi, Avere Itarare e Pratania). At 24 months of age the traits diameter at breast height (DBH), height (ALT) and volume (VOL) were measured. The individual site analyses indicated significant genetic differences among progenies, height genetic variability and the mean progeny heritability (> 0.70). For joint analyses of sites, significant differences in genotype x environmental interaction effects were detected, showing differences of performance of the progenies in different sites. The Itarare site gave high genetic gains, effective size and genetic diversity. The genetic diversity and low effective size are unviable factors; considering that the progeny tests studied should retain adequate levels of genetic variability in order to be transformed in future seedling seed orchards.
Resumo:
This work was based to study the influence of the storage temperature (cold and room temperature) in the quality of inflorescences strelitzia. The scapes were selected, labeled and there were zero problems concerning mechanical damage, disease and/or plagues. Subsequently this period, the scapes were moved randomly to recipients with water, in which two postharvest trials were conducted. In experiment 1, the flower scapes were placed in buckets with water from public supply and sanitation department and taken to a cold room at temperature of 7.5 degrees C and RH of 90%, for a twelve day period. For the experiment 2, were kept under the same conditions but at room temperature for a period of six days. In both experiments, the visual analysis: color, gloss, stains (by assigning notes), opening and drop florets (count) were evaluated at intervals of four days in cold and every 48 hours at ambient temperature conditions. In both experiments, the visual analysis: color, gloss, stains (by assigning notes), opening and drop florets (count) were evaluated at intervals of four days in cold and every 48 hours at ambient temperature conditions. The sepal is the organ that showed greater loss in coloration. The variable gloss showed the same pattern for the two experiments. Incidences of stains on the inflorescences occurred in patches at room temperature. The scapes increased number of florets open in cold. This tendency did not occur at room temperature. No were observed differences in the fall of florets. Conclude that the storage temperature does not contribute to postharvest quality of strelitzia.
Resumo:
The aim of the present study was to investigate the abrasive effect of CaCO3 and SiO2-based fluoride-free experimental toothpastes on eroded human permanent dental enamel and evaluate the effectiveness of waiting periods between acid exposure and tooth brushing. Twelve volunteers wore palatal appliances containing human enamel blocks for two periods of five days each. The appliances were immersed in a soft drink for five minutes four times a day (9:00 am, 11:00 am, 2:00 pm and 4:00 pm). On two occasions, two blocks were not submitted to additional treatment; two blocks were brushed (30 s) either with a CaCO3 or SiO2 toothpaste immediately after erosion and two blocks were brushed 1 h after erosion. Thus, the sample was divided into six groups: erosion alone (CaCO3 and SiO2 control); brushing with fluoride- free toothpaste (CaCO3 immediate and 1 h after erosion; SiO2 immediate and 1 h after erosion). Significant differences in wear depth were found between the enamel blocks in the CaCO3 immediate and 1 h after erosion groups and the blocks in the CaCO3 control group (p=0.001; p=0.022). No significant differences were found regarding the change in roughness and wear depth between blocks submitted to immediate abrasion and 1 h after erosion (CaCO3 and SiO2). The data revealed that surface roughness and wear depth is increased when erosion is combined with dental abrasion, regardless of the abrasive used. Waiting for 1 h to brush the eroded blocks offered no protective effect.
Resumo:
In this paper, we aim to understand the discourses of public school teachers who were former students of an Undergraduate Physics Education course, when they are perceived as actors speakers a public sphere concerned about teacher eduaction. So, we focused virtual dialogues occurred between these former students and a professor of the same course during the organization of the First Meeting of Ex-students inserted in an annual event called Meeting of the Teaching Practice in Physics of Ilha Solteira (ENPEFIS). Thus, we analyze these dialogues according to concepts of public sphere, communicative action and teachers as intellectuals according to elements of the content analysis of these virtual dialogues. Therefore, we envision in this work an important discussion for science teaching , since it reflects briefly on Physics Education committed to discussing science teaching in order to overcome the dogmatic and instrumental science education.
Resumo:
Pós-graduação em Agronomia (Produção Vegetal) - FCAV
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Cirurgia Veterinária - FCAV
Resumo:
The international energy situation indicates to the depletion of oil reserves in the short term. Brazil, considering its potential, has sought through public policy, encourage the study of alternative forms of energy. Many of these forms are based on sub-products and agricultural products, especially the ethanol industry for fuel purposes. Another alternative of vegetable origin, most recently discussed, would be the production of fuel oil called biodiesel. The study aimed to extract and measure the pulp oil production of macaúba palm [Acrocomia aculeata (Jacq) Lodd. ex Mart], collected in Botucatu (SP). In addition, the qualitative analysis of the pulp and almond oil are determined. The results showed low productivity in oils, compared to the reported for macauba natural populations of Minas Gerais. The qualitative analysis of the macauba pulp shows to be rich in long chain fatty acids, while the almond have significant amounts of lauric acid.
Resumo:
Pós-graduação em Agronomia - FEIS