Indigenous Movements, Democracy, and U.S. Interests in Latin America

Indigenous movements have become increasingly powerful in the last couple of decades and they are now important political actors in some South American countries, such as Bolivia, Ecuador, and, to a lesser extent, Peru and Chile. The rise of indigenous movements has provoked concern among U.S. policymakers and other observers who have feared that these movements will exacerbate ethnic polarization, undermine democracy, and jeopardize U.S. interests in the region. This paper argues that concern over the rise of indigenous movements is greatly exaggerated. It maintains that the rise of indigenous movements has not brought about a market increase in ethnic polarization in the region because most indigenous organizations have been ethnically inclusive and have eschewed violence. Although the indigenous movements have at times demonstrated a lack of regard for democratic institutions and procedures, they have also helped deepen democracy in the Andean region by promoting greater political inclusion and participation and by aggressively combating ethnic discrimination and inequality. Finally, this study suggests that the indigenous population has opposed some U.S. –sponsored initiatives, such as coca eradication and market reform, for legitimate reasons. Such policies have had some negative environmental, cultural, and economic consequences for indigenous people, which U.S. policymakers should try to address. The conclusion provides some specific policy recommendations on how to go about this.

Investigation of escape and negative student behaviors related to Florida state high stakes test preparation in Miami-Dade County Public High Schools

The purpose of this study was to determine whether there was a relationship between pressure to perform on state mandated, high-stakes tests and the rate of student escape behavior defined as the number of school suspensions and absences. The state assigned grade of a school was used as a surrogate measure of pressure with the assumption that pressure increased as the school grade decreased. Student attendance and suspension data were gathered from all 33 of the regular public high schools in Miami-Dade County Public Schools. The research questions were: Is the number of suspensions highest in the third quarter, when most FCAT preparation takes place for each of the 3 school years 2007-08 through 2009-10? How accurately does the high school's grade predict the number of suspensions and number of absences during each of the 4 school years 2005-06 through 2008-09? The research questions were answered using repeated measures analysis of variance for research question #1 and non-linear multiple regression for research question #2. No significant difference could be found between the numbers of suspensions in each of the grading periods nor was there a relationship between the number of suspensions and school grade. A statistically significant relationship was found between student attendance and school grade. When plotted, this relationship was found to be quadratic in nature and formed a loose inverted U for each of the four years during which data were collected. This indicated that students in very high and very low performing schools had low levels of absences while those in the midlevel of the distribution of school performance (C schools) had the greatest rates of absence. Identifying a relationship between the pressures associated with high stakes testing and student escape behavior suggests that it might be useful for building administrators to reevaluate test preparation activities and procedures being used in their building and to include anxiety reducing strategies. As a relationship was found, it sets the foundation for future studies to identify whether testing related activities are impacting some students emotionally and are causing unintended consequences of testing mandates.

In-Vivo Corrosion and Fretting of Modular TI-6AL-4V/CO-CR-MO Hip Prostheses: The Influence of Microstructure and Design Parameters

The purpose of this study was to evaluate the incidence of corrosion and fretting in 48 retrieved titanium-6aluminum-4vanadium and/or cobalt-chromium-molybdenum modular total hip prosthesis with respect to alloy material microstructure and design parameters. The results revealed vastly different performance results for the wide array of microstructures examined. Severe corrosion/fretting was seen in 100% of as-cast, 24% of low carbon wrought, 9% of high carbon wrought and 5% of solution heat treated cobalt-chrome. Severe corrosion/fretting was observed in 60% of Ti-6Al-4V components. Design features which allow for fluid entry and stagnation, amplification of contact pressure and/or increased micromotion were also shown to play a role. 75% of prosthesis with high femoral head-trunnion offset exhibited poor performance compared to 15% with a low offset. Large femoral heads (>32mm) did not exhibit poor corrosion or fretting. Implantation time was not sufficient to cause poor performance; 54% of prosthesis with greater than 10 years in-vivo demonstrated none or mild corrosion/fretting.

Bulk components and ice rafted debris of five sediment cores of the Sophia Basin, Arctic Ocean

Periods of enhanced terrigenous input to the ocean's basins of the North Atlantic have been reported for the last glacial period. We present a set of new sediment cores recovered from the Sophia Basin north of Svalbard which exhibit wide spread IRD layers reflecting enhanced terrigenous input throughout the last ~200 kyr. BP. Their consistent stratigraphic position, sedimentological character, high sedimentation rate and geochemical characteristic point to synchronously deposited layers which we name terrigenous input events (TIEs). Due to their higher densities, they generate excellent reflectors for sediment penetrating acoustic devices and prominent acoustic layers in the imagery of sedimentary structures. Therefore TIEs can be used for regional acoustic stratigraphy. Each of the events can be linked to major glacial activity on Svalbard. However, the Early Weichselian glaciation is not recorded as a TIE and, in agreement with other work, might not have occurred on Svalbard as a major glacial advance to the shelf break. Non-synchronous timing of western and northern sources on Svalbard points against sea-level induced iceberg discharge events.

Miniature optical delay lines and buffers

Creation of miniature optical delay lines and buffers is one of the greatest challenges of the modern photonics which can revolutionize optical communications and computing. Several remarkable designs of slow light optical delay lines employing coupled ring resonators and photonic crystal waveguides has been suggested and experimentally demonstrated. However, the insertion loss of these devices is too large for their practical applications. Alternatively, the recently developed photonic fabrication platform, Surface Nanoscale Axial Photonics (SNAP) allows us to fabricate record small delay lines with unprecedentedly small dispersion and low loss. In this report, we review the recent progress in fabrication and design of miniature slow light devices and buffers, in particular, those based on the SNAP technology.

Anodic behavior of InP: film growth, porous structures and current oscillations.

We review our recent work on the anodization of InP in KOH electrolytes. The anodic oxidation processes are shown to be remarkably different in different concentrations of KOH. Anodization in 2 - 5 mol dm-3 KOH electrolytes results in the formation of porous InP layers but, under similar conditions in a 1 mol dm-3 KOH, no porous structure is evident. Rather, the InP electrode is covered with a thin, compact surface film at lower potentials and, at higher potentials, a highly porous surface film is formed which cracks on drying. Anodization of electrodes in 2 - 5 mol dm-3 KOH results in the formation of porous InP under both potential sweep and constant potential conditions. The porosity is estimated at ~65%. A thin layer (~ 30 nm) close to the surface appears to be unmodified. It is observed that this dense, near-surface layer is penetrated by a low density of pores which appear to connected it to the electrolyte. Well-defined oscillations are observed when InP is anodized in both the KOH and (NH4)2S. The charge per cycle remains constant at 0.32 C cm-2 in (NH4)2S but increases linearly with potential in KOH. Although the characteristics of the oscillations in the two systems differ, both show reproducible and well-behaved values of charge per cycle.

Growth and characterization of anodic Films on InP in KOH and (NH4)2S

The current-voltage characteristics of InP were investigated in (NH4)2S and KOH electrolytes. In both solutions, the observation of current peaks in the cyclic voltammetric curves was attributed to the growth of passivating films. The relationship between the peak currents and the scan rates suggests that the film formation process is diffusion controlled in both cases. The film thickness required to inhibit current flow was found to be much lower on samples anodized in the sulphide solution. Focused ion beam (FIB) secondary electron images of the surface films show that film cracking of the type reported previously for films grown in (NH4)2S is also observed for films grown in KOH. X-ray and electron diffraction measurements indicate the presence of In2O3 and InPO4 in films grown in KOH and In2S3 in films grown in (NH4)2S.

Coding Strategies and Implementations of Compressive Sensing

This dissertation studies the coding strategies of computational imaging to overcome the limitation of conventional sensing techniques. The information capacity of conventional sensing is limited by the physical properties of optics, such as aperture size, detector pixels, quantum efficiency, and sampling rate. These parameters determine the spatial, depth, spectral, temporal, and polarization sensitivity of each imager. To increase sensitivity in any dimension can significantly compromise the others.

This research implements various coding strategies subject to optical multidimensional imaging and acoustic sensing in order to extend their sensing abilities. The proposed coding strategies combine hardware modification and signal processing to exploiting bandwidth and sensitivity from conventional sensors. We discuss the hardware architecture, compression strategies, sensing process modeling, and reconstruction algorithm of each sensing system.

Optical multidimensional imaging measures three or more dimensional information of the optical signal. Traditional multidimensional imagers acquire extra dimensional information at the cost of degrading temporal or spatial resolution. Compressive multidimensional imaging multiplexes the transverse spatial, spectral, temporal, and polarization information on a two-dimensional (2D) detector. The corresponding spectral, temporal and polarization coding strategies adapt optics, electronic devices, and designed modulation techniques for multiplex measurement. This computational imaging technique provides multispectral, temporal super-resolution, and polarization imaging abilities with minimal loss in spatial resolution and noise level while maintaining or gaining higher temporal resolution. The experimental results prove that the appropriate coding strategies may improve hundreds times more sensing capacity.

Human auditory system has the astonishing ability in localizing, tracking, and filtering the selected sound sources or information from a noisy environment. Using engineering efforts to accomplish the same task usually requires multiple detectors, advanced computational algorithms, or artificial intelligence systems. Compressive acoustic sensing incorporates acoustic metamaterials in compressive sensing theory to emulate the abilities of sound localization and selective attention. This research investigates and optimizes the sensing capacity and the spatial sensitivity of the acoustic sensor. The well-modeled acoustic sensor allows localizing multiple speakers in both stationary and dynamic auditory scene; and distinguishing mixed conversations from independent sources with high audio recognition rate.

The Barriers to the Integration of the Uterine Balloon Tamponade into South Africa and Ghana's Health Systems for the Management of Postpartum Hemorrhage

Background

Postpartum hemorrhage is the most significant contributor to maternal mortality globally, claiming 140,000 lives annually. Postpartum hemorrhage is a leading cause of maternal death in South Africa, with the literature indicating that 80 percent of the postpartum hemorrhage deaths in South Africa are avoidable. Ghana, as of 2010, witnesses 2700 maternal deaths annually, primarily because of poor quality of care in health facilities and services being difficult to access. As per WHO recommendations, uterotonics are integral to treating postpartum hemorrhage as soon as it is diagnosed. In case of persistent bleeding or limited availability of uterotonics, the uterine balloon tamponade (UBT) can be used as a second line of defense. If both these measures are unable to counter the bleeding, providers must perform surgical interventions. Literature on the UBT, as one tool in the protocol to address postpartum hemorrhage, has shown it to have success rates ranging from 60 to 100 percent. Despite the potential to lower the number of postpartum hemorrhage deaths in South Africa and Ghana, the UBT has not been incorporated widely in South Africa and Ghana. The aim of this study is to describe the barriers involved with integrating the UBT into South Africa and Ghana’s health systems to address postpartum hemorrhage.

Methods

The study took place in multiple sites in South Africa (Cape Town, Johannesburg, Durban and Mpumalanga) and in Accra, Ghana. South Africa and Ghana were selected because postpartum hemorrhage contributes greatly to their maternal mortality numbers and there is potential in both countries to lower those rates through greater use of the UBT. A total of 25 participants were interviewed through purposive sampling, snowball sampling and participant referrals, and included various categories of stakeholders integral to the integration process of a medical device. Individual in-depth interviews were used for data collection, with interview questions being tailored to each stakeholder category. The focus of the interviews was on the protocol used to counter postpartum hemorrhage, the frequency with which the UBT is used as part of the protocol, and the process of integrating it into the South Africa and Ghana’s health systems. The data collected were coded using NVivo and analyzed using content analysis.

Results

The barriers to integration of the uterine balloon tamponade to address postpartum hemorrhage in South Africa and Ghana were evident on the political, economic and health delivery levels. The results indicated that the barriers to integration in South Africa included the low recognition of postpartum hemorrhage as a problem, the lack of clarity surrounding the role of the Medicines Control Council as a regulatory body for medical devices, and low awareness of the UBT as an intervention to control postpartum hemorrhage. The barriers in Ghana were the cash constraints experienced by the Ghana Health Services to fund medical devices, a heavy reliance on donors for funding, and the lack of consistent knowledge on processes involving clinical trials for new medical devices in Ghana.

Conclusion

Existing literature on methods to counter postpartum hemorrhage to reduce maternal mortality has focused on and emphasized the efficacy of the UBT. Despite overwhelming evidence supporting the use of the UBT, many health systems across the world, particularly low-income countries, do not have access to the device owing to numerous barriers in integrating the device into obstetric care. This study illustrates the need to focus on incorporating the UBT into health systems for greater availability to health workers and its use as standard of care. Ultimately, this study can be used as a stepping-stone for more research on this subject, providing evidence to influence policymakers to integrate the UBT into their protocols for postpartum hemorrhage response.

A New Method for Modeling Free Surface Flows and Fluid-structure Interaction with Ocean Applications

The computational modeling of ocean waves and ocean-faring devices poses numerous challenges. Among these are the need to stably and accurately represent both the fluid-fluid interface between water and air as well as the fluid-structure interfaces arising between solid devices and one or more fluids. As techniques are developed to stably and accurately balance the interactions between fluid and structural solvers at these boundaries, a similarly pressing challenge is the development of algorithms that are massively scalable and capable of performing large-scale three-dimensional simulations on reasonable time scales. This dissertation introduces two separate methods for approaching this problem, with the first focusing on the development of sophisticated fluid-fluid interface representations and the second focusing primarily on scalability and extensibility to higher-order methods.

We begin by introducing the narrow-band gradient-augmented level set method (GALSM) for incompressible multiphase Navier-Stokes flow. This is the first use of the high-order GALSM for a fluid flow application, and its reliability and accuracy in modeling ocean environments is tested extensively. The method demonstrates numerous advantages over the traditional level set method, among these a heightened conservation of fluid volume and the representation of subgrid structures.

Next, we present a finite-volume algorithm for solving the incompressible Euler equations in two and three dimensions in the presence of a flow-driven free surface and a dynamic rigid body. In this development, the chief concerns are efficiency, scalability, and extensibility (to higher-order and truly conservative methods). These priorities informed a number of important choices: The air phase is substituted by a pressure boundary condition in order to greatly reduce the size of the computational domain, a cut-cell finite-volume approach is chosen in order to minimize fluid volume loss and open the door to higher-order methods, and adaptive mesh refinement (AMR) is employed to focus computational effort and make large-scale 3D simulations possible. This algorithm is shown to produce robust and accurate results that are well-suited for the study of ocean waves and the development of wave energy conversion (WEC) devices.

Piezoelectric energy harvesting using blood-flow-like excitation for implantable devices

The goal of this research is to produce a system for powering medical implants to increase the lifetime of the implanted devices and reduce the battery size. The system consists of a number of elements – the piezoelectric material for generating power, the device design, the circuit for rectification and energy storage. The piezoelectric material is analysed and a process for producing a repeatable high quality piezoelectric material is described. A full width half maximum (FWHM) of the rocking curve X-Ray diffraction (XRD) scan of between ~1.5° to ~1.7° for test wafers was achieved. This is state of the art for AlN on silicon and means devices with good piezoelectric constants can be fabricated. Finite element modelling FEM) was used to design the structures for energy harvesting. The models developed in this work were established to have an accuracy better than 5% in terms of the difference between measured and modelled results. Devices made from this material were analysed for power harvesting ability as well as the effect that they have on the flow of liquid which is an important consideration for implantable devices. The FEM results are compared to experimental results from laser Doppler vibrometry (LDV), magnetic shaker and perfusion machine tests. The rectifying circuitry for the energy harvester was also investigated. The final solution uses multiple devices to provide the power to augment the battery and so this was a key feature to be considered. Many circuits were examined and a solution based on a fully autonomous circuit was advanced. This circuit was analysed for use with multiple low power inputs similar to the results from previous investigations into the energy harvesting devices. Polymer materials were also studied for use as a substitute for the piezoelectric material as well as the substrate because silicon is more brittle.

Education and self-regulation of learning for gifted pupils: Systemic design and development.

Gifted pupils differ from their age-mates with respect to development potential, actual competencies, self-regulatory capabilities, and learning styles in one or more domains of competence. The question is how to design and develop education that fits and further supports such characteristics and competencies of gifted pupils. Analysis of various types of educational interventions for gifted pupils reflects positive cognitive or intellectual effects and differentiated social comparison or group-related effects on these pupils. Systemic preventive combination of such interventions could make these more effective and sustainable. The systemic design is characterised by three conditional dimensions: differentiation of learning materials and procedures, integration by and use of ICT support, and strategies to improve development and learning. The relationships to diagnostic, instructional, managerial, and systemic learning aspects are expressed in guidelines to develop or transform education. The guidelines imply the facilitation of learning arrangements that provide flexible self-regulation for gifted pupils. A three-year pilot in Dutch nursery and primary school is conducted to develop and implement the design in collaboration with teachers. The results constitute prototypes of structured competence domains and supportive software. These support the screening of entry characteristics of all four-year old pupils and assignment of adequate play and learning processes and activities throughout the school career. Gifted and other pupils are supported to work at their actual achievement or competency levels since their start in nursery school, in self-regulated learning arrangements either in or out of class. Each pupil can choose other pupils to collaborate with in small groups, at self-chosen tasks or activities, while being coached by the teacher. Formative evaluation of the school development process shows that the systemic prevention guidelines seem to improve learning and social progress of gifted pupils, including their self-regulation. Further development and implementation steps are discussed.

Learning for self-regulation: Improving instructional benefits for pupils, teachers, parents, schools, and society at large

Compulsory education laws oblige primary and secondary schools to give each pupil positive encouragement in, for example, social, emotional, cognitive, creative, and ethical respects. This is a fairly smooth process for most pupils, but it is not as easy to achieve with others. A pattern of pupil, home or family, and school variables turns out to be responsible for a long-term process that may lead to a pupil’s dropping out of education. A systemic approach will do much to introduce more clarity into the diagnosis, potential reduction and possible prevention of some persistent educational problems that express themselves in related phenomena, for example low school motivation and achievement; forced underachievement of high ability pupils; concentration of bullying and violent behaviour in and around some types of classes and schools; and drop-out percentages that are relatively constant across time. Such problems have a negative effect on pupils, teachers, parents, schools, and society alike. In this address, I would therefore like to clarify some of the systemic causes and processes that we have identified between specific educational and pupil characteristics. Both theory and practice can assist in developing, implementing, and checking better learning methods and coaching procedures, particularly for pupils at risk. This development approach will take time and require co-ordination, but it will result in much better processes and outcomes than we are used to. First, I will diagnose some systemic aspects of education that do not seem to optimise the learning processes and school careers of some types of pupils in particular. Second, I will specify cognitive, social, motivational, and self-regulative aspects of learning tasks and relate corresponding learning processes to relevant instructional and wider educational contexts. I will elaborate these theoretical notions into an educational design with systemic instructional guidelines and multilevel procedures that may improve learning processes for different types of pupils. Internet-based Information and Communication Technology, or ICT, also plays a major role here. Third, I will report on concrete developments made in prototype research and trials. The development process concerns ICT-based differentiation of learning materials and procedures, and ICT-based strategies to improve pupil development and learning. Fourth, I will focus on the experience gained in primary and secondary educational practice with respect to implementation. We can learn much from such practical experience, in particular about the conditions for developing and implementing the necessary changes in and around schools. Finally, I will propose future research. As I hope to make clear, theory-based development and implementation research can join forces with systemic innovation and differentiated assessment in educational practice, to pave the way for optimal “learning for self-regulation” for pupils, teachers, parents, schools, and society at large.

Achieving Energy Saving through Proxying Applications on behalf of Idle Devices

Several studies in the past have revealed that network end user devices are left powered up 24/7 even when idle just for the sake of maintaining Internet connectivity. Network devices normally support low power states but are kept inactive due to their inability to maintain network connectivity. The Network Connectivity Proxy (NCP) has recently been proposed as an effective mechanism to impersonate network connectivity on behalf of high power devices and enable them to sleep when idle without losing network presence. The NCP can efficiently proxy basic networking protocol, however, proxying of Internet based applications have no absolute solution due to dynamic and non-predictable nature of the packets they are sending and receiving periodically. This paper proposes an approach for proxying Internet based applications and presents the basic software architectures and capabilities. Further, this paper also practically evaluates the proposed framework and analyzes expected energy savings achievable under-different realistic conditions.

Comparison between SensibleThings and Kaa platform

With the Internet of Things becoming more and more popular, and a prediction that there will be more than 50 million devices connected to the Internet in 2020, the quantity of IoT platforms on the market is rapidly growing. Facing so many platforms to choose, the object of this thesis is to give some suggestions for reference by performing a quantitative comparison between two platforms: SensibleThings and Kaa. These two platforms have difference architectures so may suitable in different scenes. The comparison includes some measurement and evaluation under two designed scenarios and a general contrast in theory. Two scenarios cover cases of message delivery between two endpoints at different rates and multiple endpoints pushing log data continually. The result of measurement together with the theoretical analysis draw out the following conclusion. SensibleThings platform is more suitable for simple and small-scale message delivery between endpoints, like home environment with few devices. And Kaa platform is more suitable for large-scale and complicated application for data collection and processing, like meteorology field with huge amount of sensors and data.