The Fall of Icarus

Pieter Bruegel the Elder; 2 ft. 5 9/64 in. x 3 ft. 8 3/32 in.; oil on canvas, mounted on wood

Experimental evaluation of expendable bathythermographs.

"Nobsr-93055. Project serial no. SF-101-03-21. Task 11353."

High-resolution spatial processing in underwater acoustics /

Mode of access: Internet.

Linking surficial geomorphology with vertical structure in high and low energy marine environments

Senior thesis written for Oceanography 445

Variations in seafloor depth estimates under different swath-width characteristics of submarine structures in the California Borderlands

Senior thesis written for Oceanography 445

Mean field methods for classification with Gaussian processes

We discuss the Application of TAP mean field methods known from Statistical Mechanics of disordered systems to Bayesian classification with Gaussian processes. In contrast to previous applications, no knowledge about the distribution of inputs is needed. Simulation results for the Sonar data set are given.

Signal processing techniques for ultrasonic inspection

This thesis discusses the need for nondestructive testing and highlights some of the limitations in present day techniques. Special interest has been given to ultrasonic examination techniques and the problems encountered when they are applied to thick welded plates. Some suggestions are given using signal processing methods. Chapter 2 treats the need for nondestructive testing as seen in the light of economy and safety. A short review of present day techniques in nondestructive testing is also given. The special problems using ultrasonic techniques for welded structures is discussed in Chapter 3 with some examples of elastic wave propagation in welded steel. The limitations in applying sophisticated signal processing techniques to ultrasonic NDT~ mainly found in the transducers generating or receiving the ultrasound. Chapter 4 deals with the different transducers used. One of the difficulties with ultrasonic testing is the interpretation of the signals encountered. Similar problems might be found with SONAR/RADAR techniques and Chapter 5 draws some analogies between SONAR/RADAR and ultrasonic nondestructive testing. This chapter also includes a discussion on some on the techniques used in signal processing in general. A special signal processing technique found useful is cross-correlation detection and this technique is treated in Chapter 6. Electronic digital compute.rs have made signal processing techniques easier to implement -Chapter 7 discusses the use of digital computers in ultrasonic NDT. Experimental equipment used to test cross-correlation detection of ultrasonic signals is described in Chapter 8. Chapter 9 summarises the conclusions drawn during this investigation.

The mechanical behaviour of cylindrical GRP panels

Glass reinforced plastic (GRP) is now an established material for the fabrication of sonar windows. Its good mechanical strength, light weight, resistance to corrosion and acoustic transparency, are all properties which fit it for this application. This thesis describes a study, undertaken at the Royal Naval Engineering College, Plymouth, into the mechanical behaviour of a circular cylindrical sonar panel. This particular type of panel would be used to cover a flank array sonar in a ship or submarine. The case considered is that of a panel with all of its edges mechanically clamped and subject to pressure loading on its convex surface. A comprehensive program of testing, to determine the orthotropic elastic properties of the laminated composite panel material is described, together with a series of pressure tests on 1:5 scale sonar panels. These pressure tests were carried out in a purpose designed test rig, using air pressure to provide simulated hydrostatic and hydrodynamic loading. Details of all instrumentation used in the experimental work are given in the thesis. The experimental results from the panel testing are compared with predictions of panel behaviour obtained from both the Galerkin solution of Flugge's cylindrical shell equations (orthotropic case), and finite element modelling of the panels using PAFEC. A variety of appropriate panel boundary conditions are considered in each case. A parametric study, intended to be of use as a preliminary design tool, and based on the above Galerkin solution, is also presented. This parametric study considers cases of boundary conditions, material properties, and panel geometry, outside of those investigated in the experimental work Final conclusions are drawn and recommendations made regarding possible improvements to the procedures for design, manufacture and fixing of sonar panels in the Royal Navy.

Characterization of Atlantic Cod Spawning Habitat and Behavior in Icelandic Coastal Waters

The physical habitat used during spawning may potentially be an important factor affecting reproductive output of broadcast spawning marine fishes, particularly for species with complex, substrate-oriented mating systems and behaviors, such as Atlantic cod Gadus morhua. We characterized the habitat use and behavior of spawning Atlantic cod at two locations off the coast of southwestern Iceland during a 2-d research cruise (15–16 April 2009). We simultaneously operated two different active hydroacoustic gear types, a split beam echosounder and a dual frequency imaging sonar (DIDSON), as well as a remotely operated underwater vehicle (ROV). A total of five fish species were identified through ROV surveys: including cusk Brosme brosme, Atlantic cod, haddock Melanogrammus aeglefinus, lemon sole Microstomus kitt, and Atlantic redfish Sebastes spp. Of the three habitats identified in the acoustic surveys, the transitional habitat between boulder/lava field and sand habitats was characterized by greater fish density and acoustic target strength compared to that of sand or boulder/lava field habitats independently. Atlantic cod were observed behaving in a manner consistent with published descriptions of spawning. Individuals were observed ascending 1–5 m into the water column from the bottom at an average vertical swimming speed of 0.20–0.25 m s−1 and maintained an average spacing of 1.0–1.4 m between individuals. Our results suggest that cod do not choose spawning locations indiscriminately despite the fact that it is a broadcast spawning fish with planktonic eggs that are released well above the seafloor.

Caracterização mecânica, térmica e acústica de um compósito que utiliza rejeitos de mármore, granito e EPS para a fabricação de blocos para a construção civil

The use of composite materials for the construction industry has been the subject of numerous scientific papers in Brazil and in the world. One of the factors that motivate this quest is the housing deficit that countries especially the third world face. In Brazil this deficit reaches more than 6.5 million homes, around 12% of all US households . This paper presents a composite that was obtained from waste generated in processes for the production of granite and marble slabs, cement, gypsum, sand, crushed EPS and water. These wastes cause great damage to the environment and are thrown into landfi lls in bulk. The novelty of the work is in the combined study thermal, mechanical and acoustic composite obtained in real situation of rooms that are part of an experimental housing. Many blocks were made from cement compositions, plaster, foam, sand, marb le and / or granite, preliminary tests of mechanical and thermal resistance were made by choosing the most appropriate proportion. Will be given the manufacturing processes and assembly units 500 units 10 x 80 x 28 cm produced for the construction of an ex perimental home. We studied what kind of block and residue, marble or granite, made it more feasible for the intended purpose. The mechanical strength of the produced blocks were above 3.0 MPa. The thermal resistance of the blocks was confirmed by the maxi mum temperature difference between the inner and outer walls of rooms built around 8.0 ° C. The sound absorption for optimal room was around 31%. Demonstrated the feasibility of using the blocks manufactured with composite material proposed for construction.

A plasticidade acústica de uma população de Boto - Cinza, Sotalia Guianensis (Van Banédén, 1864) (Cetacea, Delphinidae), na região Nordeste do Brasil

The environmental characteristics can modify the acoustics of a species due to habitat, time of day and year. Therefore, this study investigated the relationships between seasons, tide, daily cycle of tides, times of day and different habitat and noise emission of S. guianensis. Sound recordings occurred in the Curral’s Cove and Lagoon Complex of Guaraíras (CLG) in the municipality of Tibau do Sul/RN. Whistles are emitted with lower frequency during rainy season and spring tide while clicks are higher; whistles, clicks and calls have higher frequency during ebb tide. These modifications can be related with turbidity and prey availability. The whistles and clicks occurrence are higher at night probably because luminosity is lower. Furthermore, the whistles and clicks frequency reduction overnight allows the sound to travel longer distance and helps the view which is limited; but the minimum frequency increase was needed to catch the prey. The low occurrence of calls could be related to the small group size. The acoustic changes at night may be partly influenced by light levels as prey availability that is larger in this period. Whistle frequencies and click initial frequency are higher in CLG than Curral’s cove that permitted good precision. However, click central frequency is lower and may be connected to tracking the area. Several factors may be associated with such modifications as background noise, bottom and others. This study supports the hypothesis that S. guianensis presents an acoustic plasticity according to the local conditions where the species is embedded and adapts to the environmental changes.

Variabilidade acústica e respostas evolutivas a diferentes pressões seletivas no canto de anúncio de anfíbios

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mapping of the Eltanin impact area in the South-East Pacific

Two Polarstern expeditions were conducted in 1995 (ANT-XII/4) and 2001 (ANT-XVIII/5a) to the Bellingshausen Sea and Amundsen Sea and the suspected Eltanin meteorite impact in the SE-Pacific. A survey of the sediment distribution and its acoustic structure along the cruise track was performed. The seafloor topography was sampled using the multibeam sonar system Hydrosweep DS2 which operates on a frequency of 15.5 kHz. The resulting AWI Bathymetric Chart of the Eltanin Meteorite Impact Area is based on a Digital Terrain Model of this area. The mapping was performed using ArcGIS. The Eltanin impact area which covers the 4.100 m high Freden Seamount is visualized by one overview sheet of the scale 1:200,000 and four 1:100,000 subsheets.

Documentation of IPY Seamount

During Leg ANT-XXIII/9 on 2007-04-04 the German research vessel POLARSTERN mapped a significant bathymetric feature with its swath sonar system in the area of the Indian Ridge in the Southern Indian Ocean. The feature is a vulcano located 800 km northwest of Crozet Island. The vulcano with a crater has an absolute height of 1370 m, extending from 3100 m mean depth of the surrounding sea floor to a depth of 1730 m at the top of the crater rim. The crater has a depth of about 135 m. Due to the fact, that the feature was discovered just a month after the fourth International Polar Year (IPY) 2007/2009 has started, it was named "IPY Seamount". The undersea feature name proposal was submitted to the International Hydrographic Organisation (IHO) and the Intergovernmental Oceanographic Commission (IOC of UNESCO) on 2007-05-11. The name was officially accepted by the GEBCO Sub-Committee on Undersea Feature Names (SCUFN) at its 20th meeting in July and was added to the GEBCO Gazetteer of UFN.