Surgical glues: are they really adhesive?

OBJECTIVE: The aim of this study is to create a standard test to approve the efficacy of a surgical sealant. An industrial test, the bulge-and-blister test, which is very convenient for measuring adhesion energy, is applied to the surgical field to quantify adhesion of bioadhesives. METHODS: Samples were composed of two circular layers of equine pericardium glued by the surgical sealant studied. The sample was fixed to a support with an industrial glue. The support and the bottom layer were perforated in the centre to allow injection of pressurised water. Water was progressively introduced through the hole in the support and the bottom layer to create a blister with constant radius, increasing height and internal pressure during this first step. At a critical pressure, delamination started, the radius and height of the blister increased and the pressure decreased. At this point, the adhesion energy could be determined. The experimental parameters were measured with a pressure sensor and an optical profilometry device for deflection. RESULTS: Adhesion testing was carried out in eight paired equine pericardium samples bonded with a Dermabond cyanoacrylate glue. The average value of the practical adhesion energy is 2.3 Jm(-2) with a standard deviation of 1.5 Jm(-2). CONCLUSION: Application of the bulge-and-blister test to the surgical field was achieved and allowed a quantification of adhesion of a surgical glue. Such information is essential to compare the different surgical glues presently available. The study of the impact of bonding conditions such as pressure, hygrometry or setting conditions will provide a better understanding of the characteristics of adhesion in the surgical field.

Síntesi de nous compostos tipus catecol amb aplicació en materials funcionals

En el nostre grup d’investigació i en col·laboració amb el grup d’investigació del doctor Daniel Ruiz-Molina del Centre d’investigació en Nanociència i Nanotecnologia (CIN2) d’aquest campus universitari, hem iniciat un projecte que es planteja aconseguir biomimetitzar certes proteïnes adhesives de mol·luscs, en que la seva adherència es deu a la presència de la funcionalitat catecol. Aprofitant aquesta propietat adhesiva dels catecols, l’objectiu és poder desenvolupar nous materials per a recobriments hidro- i oleofòbics, i nous materials adhesius sent necessari el desenvolupament de protocols sintètics per a l’obtenció de compostos tipus catecol convenientment substituïts. En el present treball de recerca s’ha aconseguit la síntesi del nou catecol 10, que presenta en la seva estructura una cadena alquílica parcialment fluorada amb la finalitat de fer-ne recobriments hidro- i oleofòbics, i l’optimització i escalat del catecol 2, que presenta una cadena alquílica, amb la finalitat de fer-ne recobriments hidrofòbics. També s’ha explorat en la síntesi de catecols amb una funcionalitat tiol amb la finalitat de poder desenvolupar superfícies o nanopartícules d’or adhesives. Partint del producte comercial 17, s’ha aconseguit obtenir 10 en tres etapes sintètiques i un rendiment global del 57% i 2 en dues etapes sintètiques i un rendiment global del 63% a escala multigram, millorant la metodologia sintètica existent que consistia en quatre etapes sintètiques i un 48% de rendiment global.

Clinical performance of cervical restorations: a meta-analysis.

OBJECTIVES: To carry out a meta-analysis in order to assess the influencing factors on retention loss and marginal discoloration of cervical restorations made of composites and glass ionomer (derivates). METHODS: The literature was searched for prospective clinical studies on cervical restorations with an observation period of at least 18 months. RESULTS: Fifty clinical studies involving 40 adhesive systems matched the inclusion criteria. On average, 10% of the cervical fillings were lost and 24% exhibited marginal discoloration after 3 years. The variability ranged from 0% to 50% for retention loss and from 0% to 74% for marginal discoloration. Hardly any secondary caries was detected. When linear mixed models with a study and experiment effect were used, the analysis revealed that the adhesive/restorative class had the most significant influence, with 2-step self-etching adhesive systems performing best and 1-step self-etching adhesive systems performing worst; 3-step etch-and-rinse systems, glass ionomers/resin-modified glass ionomers, 2-step etch-and-rinse systems and polyacid-modified resin composites were ranked in between. Restorations placed in teeth whose dentin/enamel had been prepared/roughened showed a statistically significant higher retention rate than those placed in teeth with unprepared dentin (p<0.05). Beveling of the enamel and the type of isolation used (rubberdam/cotton rolls) had no significant influence. SIGNIFICANCE: The clinical performance of cervical restorations is significantly influenced by the type of adhesive system used and/or the adhesive class to which the system belonged and whether the dentin/enamel is prepared or not. 2-Step self-etching- and 3-step etch&rinse systems shall be chosen over 1-step self-etching systems and glass ionomer derivates. The dentin (and enamel) surface shall be roughened before placement of the restoration.

TLR 2 modulates inflammation in zymosan-induced arthritis in mice

Résumé L'objectif de cette étude est la compréhension des mécanismes sous-jacents à l'inflammation articulaire dans un modèle murin d'arthrite induite par le zymosan (ZIA). En particulier, la participation du récepteur Toll 2 (TLR2) et du complément C3 a été recherchée. L'inflammation articulaire a été quantifiée par l'accumulation de Technetium (Tc) in vivo, et par histologie des articulations arthritiques. Les réponses humorales et cellulaires induites par le zymosan ont été quantifiées par la prolifération lymphocytaire in vitro et par la mesure de la production d'anticorps dirigés contre le zymosan in vivo. L'inflammation associée à l'arthrite induite au zymosan est, d'après le Tc-uptake, d'aspect biphasique, avec un pic après 1 jour, puis une deuxième phase plus tardive. La deuxième phase persiste jusqu'au 24 ème jour et est associée au développement d'une immunité spécifique contre le zymosan. Les souris déficientes pour TLR-2 présentent une réduction significative de l'inflammation articulaire précoce (jour 1) et tardive (jour 24), ainsi qu'une nette diminution de l'infiltrat inflammatoire dans la membrane synoviale. De plus, la prolifération de cellules du ganglion lymphatique ainsi que le taux d'IgG dirigés contre le zymosan sont diminués de façon significative après 25 jour d'arthrite chez les souris déficientes en TLR2 par rapport aux souris sauvages contrôles. Par contraste, chez les souris déficientes pour C3 on n'observe pas de différence dans l'uptake de Tc ou le scoring histologique par rapport à la lignée sauvage. Ces résultats montrent que l'arthrite induite au zymosan n'est pas seulement un modèle d'inflammation aigue, mais que l'inflammation synoviale persiste même après 25 jours. Ce modèle implique à la fois des mécanismes d'immunité innée et acquise. Le signalling via TLR 2 semble jouer in rôle dans l'immunité au zymosan et pourrait être responsable de la nature biphasique de ce modèle d'arthrite. Abstract The interplay between the innate and acquired immune systems in chronic inflammation is not well documented. We have investigated the mechanisms of inflammation in murine zymosan-induced arthritis (ZIA) in the light of recent data on the roles of Toll-like receptor 2 (TLR2) and Dentin-1 in the activation of monocyte/macrophages by zymosan. The severity of inflammation, joint histology, lymphocyte proliferation and antibody production in response to zymosan were analyzed in mice deficient in TLR2 and complement C3, and the effects of Dentin-1 inhibition by laminarin were studied. In comparison with wild-type animals, TLR2-deficient mice showed a significant decrease in the early (day 1) and late phases (day 24) of joint inflammation. C3-deficient mice showed no differences in technetium uptake or histological scoring. TLR2-deficient mice also showed a significant decrease in lymph node cell proliferation in response to zymosan and a lower IgG antibody response to zymosan at day 25 in comparison with wild-type controls, indicating that TLR2 signalling has a role in the development of acquired immune responses to zymosan. Although laminarin, a soluble β-glucan, was able to significantly inhibit zymosan uptake by macrophages in vitro, it had no effect on ZIA in vivo. These results show that ZIA is more prolonged than was originally described and involves both the innate and acquired immune pathways. C3 does not seem to have a major role in this model of joint inflammation.

Síntesi de nous catecols amb aplicació en materials adhesius bioinspirats

En el nostre grup de recerca i en col·laboració amb el doctor Daniel Ruiz-Molina del Centre d’Investigació en Nanociència i Nanotecnologia (CIN2) d’aquest campus universitari, hem iniciat un projecte que es planteja aconseguir biomimetitzar certes proteïnes adhesives de mol·luscs, l’adherència de les quals es deu a la presència de la funcionalitat catecol. L’objectiu és poder desenvolupar nous materials adhesius basats en aquesta funcionalitat, per tant, és necessari posar a punt protocols sintètics per a l’obtenció de compostos tipus catecol convenientment substituïts. Concretament, en el present treball s’ha aconseguit la síntesi del nou catecol 10, que incorpora en la seva estructura una cadena alquílica acabada en la funcionalitat tiol, amb la finalitat de desenvolupar, més endavant, superfícies o nanopartícules d’or adhesives. En el transcurs d’aquest treball s’ha sintetitzat 4-(6’-mercaptohexil)catecol 10 en una síntesi de tipus convergent l’etapa clau de la qual és una reacció de Wittig entre la sal de fosfoni 11 i l’aldehid 20. La síntesi desenvolupada consta de 9 etapes i s’ha obtingut un rendiment global del 2%.

Síntesis de nuevos catecoles como precursores de materiales adhesivos bioinspirados

En nuestro grupo de investigación y en colaboración con el Doctor Daniel Ruiz-Molina del Centro de Investigación en Nanociencia y Nanotecnología (CIN2) de este campus universitario, hemos iniciado un proyecto que se plantea lograr biomimetizar ciertas proteínas adhesivas de moluscos, cuya adherencia se debe a la presencia de la funcionalidad catecol. El objetivo es poder desarrollar nuevos materiales adhesivos basados en esa funcionalidad, siendo necesaria por lo tanto el desarrollar protocolos sintéticos para la obtención de compuestos tipo catecol convenientemente sustituidos. Concretamente, en el presente trabajo de Master en Experimentación Química se ha conseguido la síntesis de los nuevos catecoles 1 y 2, que incorporan en su estructura una cadena alquílica acabada con la funcionalidad tiol, con el fin de poder desarrollar más adelante superficies o nanopartículas de oro adhesivas. Para la síntesis del 4-(3’-mercaptopropil)catecol 1 se ha puesto a punto una ruta de obtención partiendo del producto comercial eugenol, consistente en 3 etapas sintéticas y con un rendimiento global cercano al 70%. También se ha desarrollado una ruta sintética para el 4-(7’-mercaptopropil)catecol 2 que parte del 3,4-dimetoxibenzaldehído, y consta de 6 etapas, presentando un rendimiento global del 25%.

Cutaneous leishmaniasis mimicking a pyogenic granuloma.

The Leishmania genus is formed by parasitic protozoa which are transmitted by the bite of infected female sand flies. Cases of sexual, vertical or transfusional transmission or via infected needles have also been described. In humans, 4 forms of this disease have been described: localised cutaneous (LC), diffuse cutaneous, mucocutaneous and visceral (1). LC counts for 50–75% of all cases (2), it is the mildest form of the disease and can be caused by any species of Leishmania. In Spain, the most frequent form is the oriental sore caused by L. infantum (2). Most cases resolve spontaneously within one year. In United States and Europe, the incidence is increasing due to tourism and co-infection with HIV. The morphological spectrum of LC is very wide; multiple forms of clinical presentation have been described, although the most characteristic one is the nodular ulcerative lesion, characterised by painless crater-like ulcers with a necrotic base and covered by an adhesive crust. The main complication of LC is its progression in some strains towards the other 3 forms of the disease (3). In patients with AIDS and other diseases associated with immunosuppression the risk of dissemination is much higher than in the immunocompetent. We present a case of LC with clinical and histopathological features similar to a pyogenic granuloma.

Dental Phenotype in Jalili Syndrome Due to a c.1312 dupC Homozygous Mutation in the CNNM4 Gene.

Jalili syndrome denotes a recessively inherited combination of an eye disease (cone-rod dystrophy) and a dental disorder (amelogenesis imperfecta), which is caused by mutations in the CNNM4 gene. Whereas the ophthalmic consequences of these mutations have been studied comprehensively, the dental phenotype has obtained less attention. A defective transport of magnesium ions by the photoreceptors of the retina is assumed to account for the progressive visual impairment. Since magnesium is also incorporated in the mineral of dental hard tissues, we hypothesized that magnesium concentrations in defective enamel resulting from mutations in CNNM4 would be abnormal, if a similar deficiency of magnesium transport also accounted for the amelogenesis imperfecta. Thus, a detailed analysis of the dental hard tissues was performed in two boys of Kosovan origin affected by Jalili syndrome. Retinal dystrophy of the patients was diagnosed by a comprehensive eye examination and full-field electroretinography. A mutational analysis revealed a c.1312 dupC homozygous mutation in CNNM4, a genetic defect which had already been identified in other Kosovan families and putatively results in loss-of-function of the protein. The evaluation of six primary teeth using light and scanning electron microscopy as well as energy-dispersive X-ray spectroscopy showed that dental enamel was thin and deficient in mineral, suggesting a hypoplastic/hypomineralized type of amelogenesis imperfecta. The reduced mineral density of enamel was accompanied by decreased amounts of calcium, but significantly elevated levels of magnesium. In dentin, however, a similar mineral deficiency was associated with reduced magnesium and normal calcium levels. It is concluded that the c.1312 dupC mutation of CNNM4 results in mineralization defects of both enamel and dentin, which are associated with significantly abnormal magnesium concentrations. Thus, we could not disprove the hypothesis that a disrupted magnesium transport is involved in the development of the dental abnormalities observed in Jalili syndrome.

Study of chemical modification of alkaline lignin by the glyoxalation reaction

In this study, glyoxalated alkaline lignins with a non-volatile and non-toxic aldehyde, which can be obtained from several natural resources, namely glyoxal, were prepared and characterized for its use in wood adhesives. The preparation method consisted of the reaction of lignin with glyoxal under an alkaline medium. The influence of reaction conditions such as the molar ratio of sodium hydroxide-to-lignin and reaction time were studied relative to the properties of the prepared adducts. The analytical techniques used were FTIR and 1H-NMR spectroscopies, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Results from both the FTIR and 1H-NMR spectroscopies showed that the amount of introduced aliphatic hydroxyl groups onto the lignin molecule increased with increasing reaction time and reached a maximum value at 10 h, and after they began to decrease. The molecular weights remained unchanged until 10 h of reaction time, and then started to increase, possibly due to the repolymerization reactions. DSC analysis showed that the glass transition temperature (Tg) decreased with the introduction of glyoxal onto the lignin molecule due to the increase in free volume of the lignin molecules. TGA analysis showed that the thermal stability of glyoxalated lignin is not influenced and remained suitable for wood adhesives. Compared to the original lignin, the improved lignin is reactive and a suitable raw material for adhesive formula

The suitability of steam exploded vitis vinifera and alkaline lignin for the manufacture of fiberboard

The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications

A study of the effects of PVAC on works of art on paper and wood: pH and colour change

This paper presents the preliminary findings of pH and colour measurements carried out on artworks on paperand on wood that had been treated with a poly(vinyl acetate) (PVAC) based adhesive in the 1980s. In both cases, areas treated with PVAC proved to be less acidic than untreated areas. Contrary to expectations, the conservation treatments have not, as yet, increased acidity levels in the objects under study. Colour measurements of the works on paper showed that those that had been backed with a cotton fabric using a mixture of methylcellulose and PVAC were less yellow than those from the same print run that had not been backed. This finding suggests that the backing somehow prevented the natural degradation of the support. In view of these preliminary results, further research is clearly needed. This study forms part of a broader ongoing project to assess the role of PVAC in the conservation of a range of cultural assets.

eComment: Everyday clinical practice consequences?

Comment on : "Type A aortic dissection involving the carotid arteries: carotid stenting during open aortic arch surgery by Salvatore Lentini, Fabrizio Tancredi, Filippo Benedetto, and Roberto Gaeta in Interactive CardioVascular and Thoracic Surgery 2009 8: 157-159

Correlation between microtensile bond strength data and clinical outcome of Class V restorations.

OBJECTIVE: To determine if the results of resin-dentin microtensile bond strength (µTBS) is correlated with the outcome parameters of clinical studies on non-retentive Class V restorations. METHODS: Resin-dentin µTBS data were obtained from one test center; the in vitro tests were all performed by the same operator. The µTBS testing was performed 8h after bonding and after 6 months of storing the specimens in water. Pre-test failures (PTFs) of specimens were included in the analysis, attributing them a value of 1MPa. Prospective clinical studies on cervical restorations (Class V) with an observation period of at least 18 months were searched in the literature. The clinical outcome variables were retention loss, marginal discoloration and marginal integrity. Furthermore, an index was formulated to be better able to compare the laboratory and clinical results. Estimates of adhesive effects in a linear mixed model were used to summarize the clinical performance of each adhesive between 12 and 36 months. Spearman correlations between these clinical performances and the µTBS values were calculated subsequently. RESULTS: Thirty-six clinical studies with 15 adhesive/restorative systems for which µTBS data were also available were included in the statistical analysis. In general 3-step and 2-step etch-and-rinse systems showed higher bond strength values than the 2-step/3-step self-etching systems, which, however, produced higher values than the 1-step self-etching and the resin modified glass ionomer systems. Prolonged water storage of specimens resulted in a significant decrease of the mean bond strength values in 5 adhesive systems (Wilcoxon, p<0.05). There was a significant correlation between µTBS values both after 8h and 6 months of storage and marginal discoloration (r=0.54 and r=0.67, respectively). However, the same correlation was not found between µTBS values and the retention rate, clinical index or marginal integrity. SIGNIFICANCE: As µTBS data of adhesive systems, especially after water storage for 6 months, showed a good correlation with marginal discoloration in short-term clinical Class V restorations, longitudinal clinical trials should explore whether early marginal staining is predictive for future retention loss in non-carious cervical restorations.

Schwann cell strip for peripheral nerve repair.

Many strategies have been investigated to provide an ideal substitute to treat a nerve gap injury. Initially, silicone conduits were used and more recently conduits fabricated from natural materials such as poly-3-hydroxybutyrate (PHB) showed good results but still have their limitations. Surgically, a new concept optimising harvested autologous nerve graft has been introduced as the single fascicle method. It has been shown that a single fascicle repair of nerve grafting is successful. We investigated a new approach using a PHB strip seeded with Schwann cells to mimic a small nerve fascicle. Schwann cells were attached to the PHB strip using diluted fibrin glue and used to bridge a 10-mm sciatic nerve gap in rats. Comparison was made with a group using conventional PHB conduit tubes filled with Schwann cells and fibrin glue. After 2 weeks, the nerve samples were harvested and investigated for axonal and Schwann cell markers. PGP9.5 immunohistochemistry showed a superior nerve regeneration distance in the PHB strip group versus the PHB tube group (> 10 mm, crossed versus 3.17+/- 0.32 mm respectively, P<0.05) as well as superior Schwann cell intrusion (S100 staining) from proximal (> 10 mm, crossed versus 3.40+/- 0.36 mm, P<0.01) and distal (> 10 mm, crossed versus 2.91+/- 0.31 mm, P<0.001) ends. These findings suggest a significant advantage of a strip in rapidly connecting a nerve gap lesion and imply that single fascicle nerve grafting is advantageous for nerve repair in rats.

Amalgamas adhesivas. Un estudio sobre 128 dientes tratados con esta técnica

El propósito de este trabajo es el de presentar la amalgama adherida como un muy válido tratamiento conservador a tener en cuenta a la hora de ofertar soluciones a nuestros pacientes. Es un tratamiento conservador mucho más económico que otros muchos y ante pacientes con no demasiados recursos económicos nos puede ser de gran ayuda. Asimismo, es quizá el tipo de tratamiento más recomendable para una parte de los llamados 'pacientes especiales'. Nos referimos a los pacientes que presentan deficiencias físicas y psíquicas y que por su particularidad nos limitan casi siempre las opciones terapéuticas clásicas. Se presenta un estudio 'in vivo' sobre 128 piezas dentarias, 49 de las cuales habían necesitado tratamiento endodóncico previo y que posteriormente fueron restauradas con amalgama adherida.