Xyloglucan nano-aggregates: Physico-chemical characterisation in buffer solution and potential application as a carrier for camptothecin, an anti-cancer drug

In this work, native xyloglucan was extracted from Tamarindus indica seeds (XGT), and its properties in phosphate buffer solution (PBS) were evaluated in comparison with a commercial tamarind kernel powder (TKP). The physico-chemical characteristics of the polysaccharides such as molar mass, critical concentration and intrinsic viscosity were determined. Furthermore, using spectroscopic and microscopy techniques, it was observed that the XGs tested can be considered macromolecules able to aggregate as nano-entities of 60-140 nm. The XGT tended to an ordered and compact spherical conformation determined by the Huggins constant, circular dichroism, atomic force microscopy and transmission electron microscopy. After the determination of the properties in PBS the XGs, at concentrations of 25% above their critical aggregation concentration, were used to encapsulate camptothecin, an anti-cancer drug. The XGT sample showed an encapsulation efficiency of 42% and first-order drug delivery kinetics. These results demonstrated the importance of knowledge of the physico-chemical properties of polysaccharides, for example, to better conduct their biotechnological applications as drug carriers. (C) 2010 Elsevier Ltd. All rights reserved.

Protein Assembly onto Cationic Supported Bilayers

Cationic supported bilayers on latex are useful to isolate and immobilize oppositely charged proteins as a monomolecular layer over a range of low protein concentrations and particle number densities. Cholera toxin (CT) from Vibrio cholerae, an 87 kDa AB(5) hexameric protein and bovine serum albumin (BSA) self-assembled on dioctadecyldimethylammonium bromide (DODAB) supported bilayers with high affinity yielding highly organized and monodisperse particulates at 5 x 10(9) particles/mL, over a range of low protein concentrations (0-0.025 mg/mL BSA or CT). Protein association onto the bilayer-covered polystyrene sulfate (PSS) was determined from adsorption isotherms, dynamic light scattering for size distributions and zeta-potential analysis revealing a monomolecular, thin and highly organized protein layer surrounding each particle with potential for biospecific recognition such as antigen-antibody, receptor-ligand, hybridization of oligonucleotide sequences, all of them important in immunodiagnosis, selective biomolecular chromatographic separations, microarrays design and others.

Electrostatic and Hydrophobic Interactions Involved in CNT Biofunctionalization with Short ss-DNA

This work is aimed at studying the adsorption mechanism of short chain 20-mer pyrimidinic homoss-DNA (oligodeoxyribonucleotide, ODN: polyC(20) and polyT(20)) onto CNT by reflectometry. To analyze the experimental data, the effective-medium theory using the Bruggemann approximation represents a Suitable optical model to account for the surface properties (roughness, thickness, and optical constants) and the size of the adsorbate. Systematic information about the involved interactions is obtained by changing the physicochemical properties of the system. Hydrophobic and electrostatic interactions are evaluated by comparing the adsorption oil hydrophobic CNT and oil hydrophilic silica and by Modulating the ionic Strength With and without Mg(2+). The ODN adsorption process oil CNT is driven by hydrophobic interactions only when the electrostatic repulsion is Suppressed. The adsorption mode results in ODN molecules in a side-on orientation with the bases (nonpolar region) toward the surface. This unfavorable orientation is partially reverse by adding Mg(2+). On the other hand, the adsorption oil silica is dominated by the strong repulsive electrostatic interaction that is screened at high ionic strength or mediated by Mg(2+). The cation-mediated process induces the interaction of the phosphate backbone (polar region) with the surface, leaving the bases free for hybridization. Although the general adsorption behavior of the pyrimidine bases is the same, polyC(20) presents higher affinity for the CNT Surface due to its acid-base properties.

Hur ett företag kan uppmärksammas genom en grafisk profil och en gerillamarknadsföring

The purpose of this thesis was to create a visual identity to the café Trädgårdscafét. This was to increase the awareness of the cafe among the population of Borlänge. To make the company's visual identity visible, we also organized a guerrilla marketing. The outcome of the guerrilla marketing were then measured by calculating the number of guests during a certain period of time and also through a survey conducted in Borlänge.Graphic material, such as a graphic identity, business cards, feel good-cards, store signs, standing information folders to place on the tables and pavement board was created. Flyers and posters were also created for the guerrilla marketing. The basis for this was established in the study of literature, focus groups and surveys. We also kept a regular and open contact with the café owners throughout the project.In a similar procedure a broad knowledge about guerrilla marketing was gathered in order to be able to arrange one our selves.The guerrilla marketing was held for one day in the city of Borlänge. To attract attention, groups of outdoor furniture, decorated with green plants, were placed at different locations, while six marketers handed out flyers and spread information about the café. The guerrilla marketing resulted in that the café's customers grew by nearly twice as many on the day of the guerrilla. Surveys made before and after the guerrilla showed that the awareness of the café grew.

O processo de decisão do cliente de alta renda na aquisição de imóveis residenciais na cidade de São Paulo

O trabalho investiga, de modo exploratório, o processo de decisão de compra de um imóvel residencial pelo público de alta renda na cidade de São Paulo. Para tal, este estudo parte da literatura para indicar a importância do posicionamento estratégico de foco no cliente e da compreensão do seu processo de tomada de decisão de compra, como fonte de vantagem competitiva. Segue então uma etapa de campo na qual são realizadas entrevistas em profundidade com doze indivíduos do publico alvo que compraram apartamento em período não superior a três anos, em busca de evidências de como se dá o seu processo de decisão de compra e dos atributos por eles valorizados, responsáveis pelo sucesso ou insucesso de um novo empreendimento imobiliário. Através das entrevistas, pudemos perceber que: o reconhecimento do problema se deu primordialmente através de estados de desconforto função de alterações no ciclo de vida da família; os atributos mais relevantes foram: localização, condições de financiamento e programa interno do apartamento; a busca por informações se deu principalmente através de visitas à região de interesse; a família teve grande influência na compra; a avaliação de alternativas foi feita em função do grau de importância dado aos diferentes atributos; e, uma vez identificada à necessidade, procurou-se satisfazê-Ia de forma imediata. Como pontos de insatisfação foram referidos: área de garagem pequena, entrega do apartamento sem as áreas comuns equipadas e decoradas, pouca preocupação com segurança na etapa de projeto e falta de tubulação de ar condicionado. Com base nos resultados encontrados, este trabalho conclui que existe oportunidade para empresas do ramo de incorporação imobiliária que ainda não possuem foco no cliente, de estabelecer um canal de comunicação direto com os clientes para compreensão das suas necessidades e desejos, e utilizar tais informações para ganhar vantagem competitiva.

Desenvolvimento de pastas de cimento flexíveis para poços de petróleo submetidos à injeção de vapor utilizando látex do tipo SBR

Novel cementing materials formulations containing flexible polymeric admixtures have been studied aiming at improving the mechanical behavior of oil well cement slurries submitted to steam injection. However, research activities in this sector are still under development. The steam injected directly into the well causes casing dilation, which after a reduction in temperature, tends to return to its original dimensions, resulting in crack formation and hydraulic isolation loss of the well, which will result in shortening of well life. In this scenario, the objective of the present study was to evaluate the mechanical behavior of Portland-based slurries containing SBR latex, applied in oil well cementing of wells submitted to steam injection. Were formulated slurries with densities of 1.797 g/cm3 (15.0 lb/Gal) and 1.869 g/cm3 (15.6 lb/Gal), containing admixtures with a latex concentration of 0; 66.88; 133.76; 200.64 and 267.52 L/m3 (0, 0.5, 1.0, 1.5 and 2.0 gpc). Tests including rheology, fluid loss control, thickening time, API compressive strength and splitting tensile strength, beyond steam injection simulation. Microstrutural characteristics of the slurries were also performed (XRD, TG, FTIR and SEM). The results showed that increasing the polymer concentration increased in the rheological properties and fluid loss, and a decrease in the elasticity modulus of the cement slurries. The results obtained showed that the slurries can be applied in cementing operations of oil wells submitted to steam injection.

Otimização e análise mecânica de pastas geopoliméricas para uso em poços sujeitos à injeção cíclica de vapor

Oil wells subjected to cyclic steam injection present important challenges for the development of well cementing systems, mainly due to tensile stresses caused by thermal gradients during its useful life. Cement sheath failures in wells using conventional high compressive strength systems lead to the use of cement systems that are more flexible and/or ductile, with emphasis on Portland cement systems with latex addition. Recent research efforts have presented geopolymeric systems as alternatives. These cementing systems are based on alkaline activation of amorphous aluminosilicates such as metakaolin or fly ash and display advantageous properties such as high compressive strength, fast setting and thermal stability. Basic geopolymeric formulations can be found in the literature, which meet basic oil industry specifications such as rheology, compressive strength and thickening time. In this work, new geopolymeric formulations were developed, based on metakaolin, potassium silicate, potassium hydroxide, silica fume and mineral fiber, using the state of the art in chemical composition, mixture modeling and additivation to optimize the most relevant properties for oil well cementing. Starting from molar ratios considered ideal in the literature (SiO2/Al2O3 = 3.8 e K2O/Al2O3 = 1.0), a study of dry mixtures was performed,based on the compressive packing model, resulting in an optimal volume of 6% for the added solid material. This material (silica fume and mineral fiber) works both as an additional silica source (in the case of silica fume) and as mechanical reinforcement, especially in the case of mineral fiber, which incremented the tensile strength. The first triaxial mechanical study of this class of materials was performed. For comparison, a mechanical study of conventional latex-based cementing systems was also carried out. Regardless of differences in the failure mode (brittle for geopolymers, ductile for latex-based systems), the superior uniaxial compressive strength (37 MPa for the geopolymeric slurry P5 versus 18 MPa for the conventional slurry P2), similar triaxial behavior (friction angle 21° for P5 and P2) and lower stifness (in the elastic region 5.1 GPa for P5 versus 6.8 GPa for P2) of the geopolymeric systems allowed them to withstand a similar amount of mechanical energy (155 kJ/m3 for P5 versus 208 kJ/m3 for P2), noting that geopolymers work in the elastic regime, without the microcracking present in the case of latex-based systems. Therefore, the geopolymers studied on this work must be designed for application in the elastic region to avoid brittle failure. Finally, the tensile strength of geopolymers is originally poor (1.3 MPa for the geopolymeric slurry P3) due to its brittle structure. However, after additivation with mineral fiber, the tensile strength became equivalent to that of latex-based systems (2.3 MPa for P5 and 2.1 MPa for P2). The technical viability of conventional and proposed formulations was evaluated for the whole well life, including stresses due to cyclic steam injection. This analysis was performed using finite element-based simulation software. It was verified that conventional slurries are viable up to 204ºF (400ºC) and geopolymeric slurries are viable above 500ºF (260ºC)

Aditivação de pastas geopoliméricas com tetraborato de sódio e látex não iônico para cimentação de Poços de Petróleo

The development of activities in the oil and gas sector has been promoting the search for materials more adequate to oilwell cementing operation. In the state of Rio Grande do Norte, the cement sheath integrity tend to fail during steam injection operation which is necessary to increase oil recovery in reservoir with heavy oil. Geopolymer is a material that can be used as alternative cement. It has been used in manufacturing of fireproof compounds, construction of structures and for controlling of toxic or radioactive waste. Latex is widely used in Portland cement slurries and its characteristic is the increase of compressive strength of cement slurries. Sodium Tetraborate is used in dental cement as a retarder. The addition of this additive aim to improve the geopolymeric slurries properties for oilwell cementing operation. The slurries studied are constituted of metakaolinite, potassium silicate, potassium hydroxide, non-ionic latex and sodium tetraborate. The properties evaluated were: viscosity, compressive strength, thickening time, density, fluid loss control, at ambient temperature (27 ºC) and at cement specification temperature. The tests were carried out in accordance to the practical recommendations of the norm API RP 10B. The slurries with sodium tetraborate did not change either their rheological properties or their mechanical properties or their density in relation the slurry with no additive. The increase of the concentration of sodium tetraborate increased the water loss at both temperatures studied. The best result obtained with the addition of sodium tetraborate was thickening time, which was tripled. The addition of latex in the slurries studied diminished their rheological properties and their density, however, at ambient temperature, it increased their compressive strength and it functioned as an accelerator. The increase of latex concentration increased the presence of water and then diminished the density of the slurries and increased the water loss. From the results obtained, it was concluded that sodium tetraborate and non-ionic latex are promising additives for geopolymer slurries to be used in oilwell cementing operation

Leaf anatomy of rubber-tree clones

A seringueira é uma planta de fácil reconhecimento por ser lenhosa, de porte mediano a grande, que apresenta um padrão característico de desfolha e reenfolhamento e, sobretudo, pela produção de látex. O objetivo do trabalho foi efetuar um estudo anatômico e morfológico foliar, comparando os clones RRIM 600 e GT 1 de seringueira &91;Hevea brasiliensis (Wild. ex Adr. de Juss.) Muell.- Arg&93;, desenvolvidos sob as mesmas condições edáficas e climáticas, para obtenção de informações que possam fornecer subsídios para correlações com dados fisiológicos e também diferenciar os clones em relação ao conteúdo de fibras, espessamento de tecidos do parênquima paliçádico e do parênquima lacunoso, caracterização anatômica do pecíolo, número e tamanho de estômatos e fornecer dados referentes a morfologia foliolar. Foram realizadas secções transversais na região do mesófilo, nervura central e pecíolo, seguindo-se os métodos usuais de preparação de lâminas permanentes. Foram realizadas análises biométricas de extensões de tecidos dos parênquimas paliçádico e lacunoso e contagem do número de células do parênquima lacunoso. Paralelamente foram realizadas análises biométricas para aferições de estômatos. Não houve diferenças para a altura das células epidérmicas, altura e número de camadas do parênquima lacunoso e para o comprimento e para a maior largura do limbo foliolar. Porém houve variação para a espessura das células do parênquima paliçádico, sendo que GT 1 apresentou maior espessura em relação a RRIM 600. GT1 apresentou maior número de estômatos em relação a RRIM 600, porém com menor tamanho. GT1 apresentou maior diâmetro da nervura central da folha e do pecíolo e maior quantidade de fibras de esclerênquima que RRIM 600.

Perfil eletroforético do proteinograma sérico de eqüinos com obstrução experimental do cólon menor

Avaliaram-se as alterações do proteinograma sérico de eqüinos submetidos à isquemia e reperfusão do cólon menor por distensão intraluminal. Foram utilizados 10 animais submetidos à laparotomia pelo flanco, em posição quadrupedal, para a indução de obstrução no cólon menor durante um período de quatro horas. Cinco animais foram instrumentados, mas sem distensão (grupo controle - G1). em cinco outros animais, foi realizada isquemia mural por distensão do cólon menor via manguito inflado com 40mmHg (grupo distendido - G2). Foram colhidas amostras de sangue antes da intervenção cirúrgica (M1), com 4 horas da colocação do manguito (M2) e com 3 horas (M3) e 12 horas (M4) de reperfusão. Após centrifugação e fracionamento das amostras, as proteínas de fase aguda foram separadas por eletroforese em gel de poliacrilamida contendo SDS-PAGE, e suas concentrações determinadas por densitometria computadorizada. Foram encontradas 19 proteínas no fracionamento eletroforético, com peso molecular variando de 185.000 a 14.000 Daltons (Da). Os pesos moleculares encontrados, correspondentes às proteínas mais conhecidas, foram ceruloplasmina, 130.000 Da; proteína C-reativa, 122.000 Da; transferrina, 85.000 Da; α1-antitripsina, 61.000 Da; haptoglobina, 47.000 Da; e glicoproteína ácida, 40.000 Da. Os resultados mostram que proteínas de fase aguda se alteram após o trauma cirúrgico.

Peritoneal fluid changes in horses subjected to small colon distension

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ocorrência de Bacillus cereus em leite integral e capacidade enterotoxigênica das cepas isoladas

Pesquisaram-se a presença de Bacillus cereus e a produção de enterotoxinas produzidas por esses microrganismos em 120 amostras de diversos tipos de leite. Bacillus cereus foi isolado e identificado em 22 (73,3%), 15 (50,0%), 29 (96,7%) e quatro (13,3%) amostras de leite em pó, cru, pasteurizado e UAT (longa vida), respectivamente. Para a detecção de enterotoxinas pela técnica da alça ligada de coelho, foram positivos, respectivamente, três (13,6%), um (7,1%) e 10 (35,7%) microrganismos isolados das amostras de leite em pó, leite cru e leite pasteurizado. Pelo teste de aumento de permeabilidade vascular, dois (9,1%), um (7,1%), um (3,6%) e um (4,0%) microrganismos isolados de leite em pó, cru, pasteurizado e UAT apresentaram-se enterotoxigênicos, respectivamente. O uso da técnica de aglutinação passiva em látex demonstrou a produção da toxina diarréica por três (33,3%), sete (63,6%), quatro (30,8%) e oito (80,0%) microrganismos isolados, respectivamente, de leite em pó, cru, pasteurizado e UAT. Os resultados indicam um risco potencial, podendo colocar em risco a saúde dos consumidores desses produtos.

Ramos do arco aórtico de bubalinos

Os ramos do arco aórtico (Arcus aortae) em bubalinos foram investigados neste trabalho. Assim, foram dissecadas as artérias oriundas desse arco previamente injetadas com solução corada de látex Neoprene 650â (Du Pont do Brasil S.A.) em 20 fetos dessa espécie, machos e fêmeas com idades entre 4 e 8 meses de gestação. em 80% dos casos, observou-se que o tronco braquiocefálico (Truncus brachiocephalicus) emite a artéria subclávia (Arteria subclavia) esquerda, artérias carótidas comuns (Arteria carotis communis) esquerda e direita, sem caracterizar tronco bicarotídeo (Truncus bicaroticus), e a artéria subclávia direita. As artérias subclávias direita e esquerda originam em comum o tronco costocervical (Truncus costocervicalis), a artéria cervical superficial (Arteria cervicalis superficialis), artérias axilares (Arteria axillaris) e artéria torácica interna (Arteria thoracica interna). em 20% dos casos, o tronco braquiocefálico origina a artéria subclávia esquerda em comum ao tronco costocervical esquerdo; em seguida, emite a artéria carótida comum esquerda e termina trifurcando-se em artéria carótida comum direita, artéria subclávia direita e tronco costocervical direito, sendo que as artérias subclávias direita e esquerda têm origem comum com as artérias cervical superficial, axilar e torácica interna, com a presença do tronco bicarotídeo, característico dos bovinos.

Origem das artérias celíaca e mesentérica cranial em bubalinos (Bubalus bubalis, L. 1758)

Com o intuito de conhecer melhor o sistema arterial nesta espécie, descrevemos a origem das artérias celíaca e mesentérica cranial dos bubalinos. Utilizamos 30 fetos e 1 animal adulto. Os fetos variavam de 4 a 8 meses de idade e tiveram seus vasos injetados com solução de látex - Neoprene, tiveram seus vasos dissecados, e um animal adulto, que teve seus vasos dissecados no local de abate. Observamos que as artérias celíaca e mesentérica cranial originavam-se da porção torácica da aorta em todos os casos, estando isoladas em 90,33% deles e em tronco comum (tronco celíaco mesentérico) em 9,67% dos casos.

Descrição anátomo-topográfica do coração da paca (Agouti paca)

Background: The domestic animals heart is a conical hollow viscera, surrounded by pericardium, laterally compressed, accompanying the thorax shape. Atriums constituted the heart basis and their auricles partially bound the initial portion of the aorta and pulmonary trunk. In mammals, heart is kept suspended in the thoracic cavity and the pericardic sac is fixed dorsally by great veins and arteries roots, and ventrally fixed to the sternum, although its fixation to the diaphragm varies among species. This paper aimed to describe morphological aspects of the heart of the paca, the second biggest Brazilian rodent.Materials, Methods & Results: There were used 12 hearts of adult pacas for this study, obtained from the UNESP, Jaboticabal, SP, which died due fights or anesthesia during bandages or radiograph exams. The thoracic aorta was filled with colored latex and the animal was set in a 10% formaldehyde solution for at least 72 hours. The thoracic cavity was dissected and hearts individualized and measured with a paquimeter, lateromedially, craniocaudally and dorsoventrally. The paca heart is placed between the first and fifth intercostal space (ICS), in a craniocaudal oblique position; its basis is craniodorsally positioned, on the middle third between the first and second ICS and its apex is located near the sternodiaphragmatic joint, on the fifth ICS, tilted to the left antimere. The heart is surrounded by pericardium, which from ventrocaudally is originated the sternopericardic ligament, that continues as phrenopericardic ligament. At the heart basis, the rising of the pulmonary trunk was observed and the conus arteriosus formed a typical projection. The aorta also rised from the heart basis and its arch, which was caudally curved, crossed dorsally the pulmonary trunk; the right cranial and caudal cava veins drained to the right atrium. There is a left cranial cava vein, which surrounded the left atrium and joined the right caudal cava vein on the right atrium. The azygos vein joins the right cranial cava vein and four pulmonary veins drained to the left atrium. At palpation, a hard structure on the rising of the aorta was observed, similarly to a cartilaginous tissue, which would be part of the cardiac skeleton. The left and right coronary arteries were observed in all hearts.Discussion: The paca heart is anatomica and topographically similar to those of domestic mammals, differing from them for being placed one intercostal space more cranial and due to the presence of two cranial cava veins, the left and the right ones, besides the presence of the caudal cava vein. This vascular description is similar to that of small rodents, as rats and mice. In paca heart, the sinus venous, the terminal crest, the oval fossa, the atrioventricular valvae, the papillary muscles and tendinous cords, besides smooth atriums and auricles covered by pectinate muscles, were observed. The sternopericardic ligament, which is dorsally elongated as phrenopericardic ligament, is similar to the one present in humans, pigs, castors, and different from the one observed in carnivorous, that presents the phrenopericardic ligament and from the one of horses and ruminants, which present the sternopericardic ligament.