33轮SHACAL-2的差分非线性攻击

利用SHACAL-2的一个17轮差分非线性区分器,结合被猜测子密钥空间分割的方法和快速傅立叶变换,提出了一种攻击33轮SHACAL-2的新方法.该方法攻击33轮SHACAL-2需要244的选择明文、2496.6的33轮SHACAL-2加密和2502次算术运算,攻击成功概率为99%.与已有的结果相比较,新攻击有效地提高了单密钥下SHACAL-2的攻击轮数.

Hot-corrosion behaviors of overlay-clad yttria-stabilized zirconia coatings in contact with vanadate-sulfate salts

A dense clad overlay with chemical inertness was achieved on top of the plasma-sprayed YSZ thermal barrier coatings by laser in order to protect them from hot-corrosion attack. The Al2O3-clad YSZ coating exhibited good hot-corrosion behavior in contact with salt mixture of vanadium pentoxide (V2O5) and sodium sulfate (Na2SO4) for a longtime of 100 h at 1173 K. The LaPO4-clad YSZ coating showed corrosion resistance inferior to the Al2O3-clad one. Yttria was leached from YSZ by reaction between Y2O3 and V2O5, which caused progressive destabilization transformation of YSZ from tetragonal (t) to monoclinic (m) phase. The chemical inertness of the clad layers and the restrained infiltration of the molten corrosive salts by the dense clad layers were primary contributions to improvement of the hot-corrosion resistances.

Double propagation based on diepoxide, a facile route to high molecular weight poly(propylene carbonate)

Poly(propylene carbonate) (PPC) with number average molecular weight (M-n) higher than 200 kg/mol was prepared via the terpolymerization of carbon dioxide, propylene oxide and diepoxide using Y(CCl3OO)(3)-ZnEt2-glycerine coordination catalyst. When equimolar ZnEt2 and diepoxide were used, double propagation active species were generated in situ by nucleophilic attack of metal alkoxide on diepoxide, leading to PPC of doubled M-n value. The molecular weight of PPC has dramatic influence on its thermal and mechanical performances. PPC with M of 227 kg/mol showed modulus of 6900 MPa, while the modulus of PPC with M-n of 109 kg/mol was only 4300 MPa. Moreover, when M-n increased from 109 to 227 kg/mol, a 37 degrees C increase of the onset degradation temperature was observed.

Studies of catalyzed reaction mechanism between co-polyether (THF/EO) and N-100 by NMR - Interaction and complex formation between reactants and catalysts

To elucidate the mechanism of the catalyzed reaction of co-polyether (EO/THF) with N-100, the interaction and complex formation between reactants and catalysts were investigated by means of NMR spectroscopy. It is shown that the resonance peak of isocyanate carbon splits into two parts when the solutions of N-100 and co-polyether were mixed. The disappearing of proton resonance peak of hydroxyl group in NMR spectra when dibutyltin dilaurate(DBTDL) were added to the copolyether(THF/EO) solution indicates the complex formation, This interaction appears to be a bonding of tin to the oxygen of hydroxyl and make the hydrogen of the hydroxyl group very mobile and active, then exchange with other protons, In the case of triphenyl bismuth(TPB), the high field shift and intensity enhancement of proton peak were observed, which suggest a nucleophilic attack of the bismuth to the hydroxyl hydrogen.

Chromatographic separation and C-13 NMR characterization of aromatic diester-diacids isomers

Reverse phase high performance liquid chromatography (HPLC) was used to separate and quantify aromatic diester-diacids isomers which arise from the opening selectivity of anhydride rings towards methanol. C-13 NMR spectroscopy was a supplementary tool to characterize the isomer structure. It was found that a meta-position attack is slightly preferred in pyromellitic dianhydride (PMDA), while the preferred position of an attack in bridged dianhydrides is determined by the chemical nature (donors or accepters) of the bridged group. The stronger its electron-withdrawing abilities, the lower the probability of a meta-position attack.

CHEMICAL-IONIZATION MASS-SPECTROMETRY OF BENZOYL PEROXIDE - A RADICAL AROMATIC-SUBSTITUTION RESULTING IN BIPHENYLCARBOXYLIC ACID IN THE GAS-PHASE

A radical aromatic substitution resulting in biphenylcarboxylic acid is inferred for the decomposition of benzoyl peroxide from the chemical ionization and collision-induced dissociation mass spectra. The thermolysis of benzoyl peroxide gives rise to a benzoyloxy radical, which undergoes rapid decarboxylation and hydrogen abstraction leading to phenyl radical and benzoic acid, respectively. Attack of the resulting phenyl radical on the benzoic acid results in bipbenylcarboxylic acid. On the other hand, the phenyl radical abstracts a hydrogen atom to yield benzene, which is then subjected to the attack of a benzoyloxy radical, affording phenyl benzoate. This substitution reaction rather than the recombination of benzoyloxy and phenyl radicals is found to be responsible for the formation of phenyl benzoate under the present conditions.

Cannibalism in Japanese flounder juveniles, Paralichthys olivaceus, reared under controlled conditions

Laboratory experiments were conducted to determine the effects of sand substratum, light, starvation, fish density and size variation on cannibalism among Japanese flounder juveniles, Paralichthys olivaceus. Cannibalistic behavior (biting and swallowing) increased significantly with starvation except in darkness, where juveniles could not find and attack their prey. Cannibalism occurred more frequently in heterogeneous than in the homogeneous size groups. Cannibalism was more frequent in light than in darkness at each starvation level. With sufficient food present, sand had no significant effect on cannibalism among homogeneous size juveniles, but played an important role in discouraging predation among members of the heterogeneous size groups. With sufficient food present, the rate of cannibalism was generally low and there were no significant differences in cannibalism among fish density levels of the homogeneous juveniles, With starvation, the cannibalism rate was significantly higher in high density groups than in the lower ones. Our results indicate that size variation, starvation and Light are the major factors affecting cannibalism in flounder juveniles, while sand and fish density only have a limited effect on cannibalism, depending on the nature of other factors. (C) 2000 Elsevier Science B.V. All rights reserved.

Feeding behaviour of Japanese flounder larvae under laboratory conditions

Tank-reared Japanese flounder larvae, Paralichthys olivaceus, had a major feeding peak in the morning and a secondary peak in the afternoon throughout the larval development, with light being the primary factor regulating their feeding activity. The larvae consumed rotifers in preference to Artemia for up to 10 days, after which the food preference shifted to Artemia. Feeding rates of the larvae prior to 10 days post-batch depended on prey density, but in the old larvae, feeding rates were independent of prey density. Maximum feeding rate occurred at 19 degrees C. The occurrence of the attack posture, after its onset at first feeding (2 days post-hatch), increased up to 25 days, began to decrease when the larvae prepared to settle down, then disappeared after settlement. The occurrence frequency of the attack posture was positively related to fish density, but inversely related to starvation duration, and occurred most frequently at 19 degrees C. This posture depended on prey density in larvae prior to 10 days post-hatch, but became independent of prey density as the larvae developed. It was obvious that, for flounder larvae, attack posture was a behavioural character closely related to feeding and subject to larval development and environmental factors. (C) 2000 The Fisheries Society of the British Isles.

Corrosion behaviour of steel in beach soil along Bohai Bay

Research on corrosion of steel structures in various marine environments is essential to assure the safety of structures and can effectively prolong their service life. In order to provide data for anticorrosion design of oil exploitation structures in the Bohai Bay, the corrosion behaviour and properties of steel in beach soil, using typical steel samples (Q235A carbon steel and API 5Lx52 pipeline steel) buried 0.5, 1.0 and 1.5 m deep under typical beach soils in Tanggu, Yangjiaogou, Xingcheng, Yingkou and Chengdao for 1-2 years were studied. The carbon steel and pipeline steel were both corroded severely in the beach soil, with the form of corrosion being mainly uniform with some localised attack (pitting corrosion). The corrosion rate of the carbon steel was up to 0.16 mm/year with a maximum penetration depth of 0.76 mm and that of the pipeline steel was up to 0.14 mm/year, with a maximum penetration depth of 0.53 mm. Compared with carbon steel, the pipeline steel generally had better corrosion resistance in most test beach soils. The corrosion rates and the maximum corrosion depths of carbon steel and pipeline steel were in the order: Tanggu>Xingcheng>Chengdao>Yingkou>Yangjiaogou with corrosion altering with depth of burial. The corrosion of steel in the beach soil involves a mixed mechanism with different degrees of soil aeration and microbial activity present. It is concluded that long term in situ plate laying experiments must be carried out to obtain data on steel corrosion in this beach soil environment so that the effective protection measures can be implemented.

中国大陆及邻区地震活动背景、环境触发与地震预测研究

This dissertation that includes most of the P. PH.D research work during 2001~2002 covers the large-scale distribution of continental earthquakes in mainland China, the mechanism and statistic features of grouped strong earthquakes related to the tidal triggering, some results in earthquake prediction with correlativity analysis methods, and the flushes from the two strong continental earthquakes in South Asia in 2001. Mainland China is the only continental sub-plate that is compressed by collision boundaries at its two sides, within which earthquakes are dispersive and distributed as seismic belts with different widths. The control capability of the continental block boundaries on the strong earthquakes and seismic hazards is calculated and analyzed in this dissertation. By mapping the distribution of the 31282 ML:3s2,0 earthquakes, I found that the depth of continental earthquakes depend on the tectonic zonings. The events on the boundaries of relatively integrated blocks are deep and those on the new-developed ruptures are shallow. The average depth of earthquakes in the West of China is about 5km deeper than that in the east. The western and southwestern brim of Tarim Basin generated the deepest earthquakes in mainland China. The statistic results from correlation between the grouped M7 earthquakes and the tidal stress show that the strong events were modulated by tidal stress in active periods. Taking Taiwan area as an example, the dependence of moderate events on the moon phase angles (￡>) is analyzed, which shows that the number of the earthquakes in Taiwan when D is 50° ,50° +90° and 50° +180° is more than 2 times of standard deviation over the average frequency at each degree, corresponding to the 4th, 12th and 19th solar day after the new moon. The probability of earthquake attack to the densely populated Taiwan island on the 4th solar day is about 4 times of that on other solar days. On the practice of earthquake prediction, I calculated and analyzed the temporal correlation of the earthquakes in Xinjinag area, Qinghai-Tibet area, west Yunnan area, North China area and those in their adjacent areas, and predicted at the end of 2000 that it would be a special time interval from 2001 to 2003, within which moderate to strong earthquakes would be more active in the west of China. What happened in 2001 partly validated the prediction. Within 10 months, there were 2 great continental earthquakes in south Asia, i.e., the M7.8 event in India on Jan 26 and M8.1 event in China on Nov. 14, 2001, which are the largest earthquake in the past 50 years both for India and China. No records for two great earthquakes in Asia within so short time interval. We should speculate the following aspects from the two incidences: The influence of the fallacious deployment of seismic stations on the fine location and focal mechanism determination of strong earthquakes must be affronted. It is very important to introduce comparative seismology research to seismic hazard analysis and earthquake prediction research. The improvement or changes in real-time prediction of strong earthquakes with precursors is urged. Methods need to be refreshed to protect environment and historical relics in earthquake-prone areas.

Tense, Aspect and the Cognitive Representation of Time

This paper explores the relationships between a computation theory of temporal representation (as developed by James Allen) and a formal linguistic theory of tense (as developed by Norbert Hornstein) and aspect. It aims to provide explicit answers to four fundamental questions: (1) what is the computational justification for the primitive of a linguistic theory; (2) what is the computational explanation of the formal grammatical constraints; (3) what are the processing constraints imposed on the learnability and markedness of these theoretical constructs; and (4) what are the constraints that a linguistic theory imposes on representations. We show that one can effectively exploit the interface between the language faculty and the cognitive faculties by using linguistic constraints to determine restrictions on the cognitive representation and vice versa. Three main results are obtained: (1) We derive an explanation of an observed grammatical constraint on tense?? Linear Order Constraint??m the information monotonicity property of the constraint propagation algorithm of Allen's temporal system: (2) We formulate a principle of markedness for the basic tense structures based on the computational efficiency of the temporal representations; and (3) We show Allen's interval-based temporal system is not arbitrary, but it can be used to explain independently motivated linguistic constraints on tense and aspect interpretations. We also claim that the methodology of research developed in this study??oss-level" investigation of independently motivated formal grammatical theory and computational models??a powerful paradigm with which to attack representational problems in basic cognitive domains, e.g., space, time, causality, etc.

A Low Power Wide Dynamic Range Envelope Detector

We report a 75dB, 2.8mW, 100Hz-10kHz envelope detector in a 1.5mm 2.8V CMOS technology. The envelope detector performs input-dc-insensitive voltage-to-currentconverting rectification followed by novel nanopower current-mode peak detection. The use of a subthreshold wide- linear-range transconductor (WLR OTA) allows greater than 1.7Vpp input voltage swings. We show theoretically that this optimal performance is technology-independent for the given topology and may be improved only by spending more power. A novel circuit topology is used to perform 140nW peak detection with controllable attack and release time constants. The lower limits of envelope detection are determined by the more dominant of two effects: The first effect is caused by the inability of amplified high-frequency signals to exceed the deadzone created by exponential nonlinearities in the rectifier. The second effect is due to an output current caused by thermal noise rectification. We demonstrate good agreement of experimentally measured results with theory. The envelope detector is useful in low power bionic implants for the deaf, hearing aids, and speech-recognition front ends. Extension of the envelope detector to higher- frequency applications is straightforward if power consumption is inc

PILOT: A Step Toward Man-Computer Symbiosis

PILOT is a programming system constructed in LISP. It is designed to facilitate the development of programs by easing the familiar sequence: write some code, run the program, make some changes, write some more code, run the program again, etc. As a program becomes more complex, making these changes becomes harder and harder because the implications of changes are harder to anticipate. In the PILOT system, the computer plays an active role in this evolutionary process by providing the means whereby changes can be effected immediately, and in ways that seem natural to the user. The user of PILOT feels that he is giving advice, or making suggestions, to the computer about the operation of his programs, and that the system then performs the work necessary. The PILOT system is thus an interface between the user and his program, monitoring both in the requests of the user and operation of his program. The user may easily modify the PILOT system itself by giving it advice about its own operation. This allows him to develop his own language and to shift gradually onto PILOT the burden of performing routine but increasingly complicated tasks. In this way, he can concentrate on the conceptual difficulties in the original problem, rather than on the niggling tasks of editing, rewriting, or adding to his programs. Two detailed examples are presented. PILOT is a first step toward computer systems that will help man to formulate problems in the same way they now help him to solve them. Experience with it supports the claim that such "symbiotic systems" allow the programmer to attack and solve more difficult problems.

Introduction

Alden, N. L. (2007). Introduction. Critical Quarterly, 49 (2), pp.34-38 RAE2008