Vitamin E may affect the life expectancy of men, depending on dietary vitamin C intake and smoking

Background: Antioxidants might protect against oxidative stress, which has been suggested as a cause of aging. Methods: The ATBC Study recruited males aged 50-69 years who smoked at least 5 cigarettes per day at the baseline. The current study was restricted to participants who were followed up past the age of 65. Deaths were identified in the National Death Registry (1445 deaths). We constructed Kaplan-Meier survival curves for all participants, and for four subgroups defined by dietary vitamin C intake and level of smoking. We also constructed Cox regression models allowing a different vitamin E effect for low and high age ranges. Results: Among all 10,837 participants, vitamin E had no effect on those who were 65 to 70 years old, but reduced mortality by 24% when participants were 71 or older. Among 2284 men with dietary vitamin C intakes above the median who smoked less than a pack of cigarettes per day, vitamin E extended life-span by two years at the upper limit of the follow-up age span. In this subgroup, the survival curves of vitamin E and no-vitamin E participants diverged at 71 years. In the other three subgroups covering 80% of the participants, vitamin E did not affect mortality. Conclusions: This is the first study to strongly indicate that protection against oxidative stress can increase the life expectancy of some initially healthy population groups. Nevertheless, the lack of effect in 80% of this male cohort shows that vitamin E is no panacea for extending life expectancy.

Spectrophotometric and potentiometric investigations of copper (II)-Ethanolamine complexes - Part III. diethanolamine (Gaussian analysis of electronic spectra in mono and diethanolamine systems)

Spectrophotometric and potentiometric investigations have been carried out on copper-diethanolamine system. Job plots at 900, 900 and 580 mμ have indicated the formation of CuD++, CuD2++ and CuD3++. The n- pA curves obtained indicate the formation of CuD++, CuD2++, CuD3++, CuDOH+, CuD2OH+ and CuD3OH+. The n- pA curves have been analyzed to obtain the stability constants of these complexes. Absorption curves of pure complexes have been computed by a graphical method. Gaussian analysis of the absorption curves of pure and hydroxy complexes show the presence of a second band, indicating that the structure is that of a distorted octahedron.

Juvenile diversity of tree species in Theobroma cacao L. agroforestry and primary forest – Central Sulawesi, Indonesia

This thesis studies the tree species’ juvenile diversity in cacao (Theobroma cacao L.) based agroforestry and in primary forest in a natural conservation forest environment of Lore Lindu National Park, Sulawesi, Indonesia. Species’ adult composition in Lore Lindu National Park is relatively well studied, less is known about tree species’ diversity in seedling communities particularly in frequently disturbed cacao agroforestry field environment. Cacao production forms a potentially serious thread for maintaining the conservation areas pristine and forested in Sulawesi. The impacts of cacao production on natural environment are directly linked to the diversity and abundance of shade tree usage. The study aims at comparing differences between cacao agroforestry and natural forest in the surrounding area in their species composition in seedling and sapling size categories. The study was carried out in two parts. Biodiversity inventory of seedlings and saplings was combined with social survey with farmer interviews. Aim of the survey was to gain knowledge of the cacao fields, and farmers’ observations and choices regarding tree species associated with cacao. Data was collected in summer 2008. The assessment of the impact of environmental factors of solar radiation, weeding frequency, cacao tree planting density, distance to forest and distance to main park road, and type of habitat on seedling and sapling compositions was done with Non-metric Multidimensional Scaling (NMS). Outlier analysis was used to assess distorting variables for NMS, and Multi-Response Permutation Procedures (MRPP) analysis to differentiate the impact of categorical variables. Sampling success was estimated with rarefaction curves and jackknife estimate of species richness. In the inventory 135 species of trees and shrubs were found. Only some agroforestry related species were dominating. The most species rich were sapling communities in forest habitat. NMS was showing generally low linear correlation between variation of species composition and environmental variables. Solar radiation was having most significance as explaining variable. The most clearly separated in ordination were cacao and forest habitats. The results of seedling and sapling inventory were only partly coinciding with farmers’ knowledge of the tree species occurring on their fields. More research with frequent assessment of seedling cohorts is needed due to natural variability of cohorts and high mortality rate of seedlings.

Vibrational force constant and electron relaxation in H2 and Li2

The force constants of H2 and Li2 are evaluated employing their extended Hartree-Fock wavefunctions by a polynomial fit of their force curves. It is suggested that, based on incomplete multiconfiguration Hartree-Fock wavefunctions, force constants calculated from the energy derivatives are numerically more accurate than those obtained from the derivatives of the Hellmann-Feynman forces. It is observed that electrons relax during the nuclear vibrations in such a fashion as to facilitate the nuclear motions.

A simple low-cost electrical switching analyzer for I-V characterization of switching samples and devices

The phenomena of nonlinear I-V behavior and electrical switching find extensive applications in power control, information storage, oscillators, etc. The study of I-V characteristics and switching parameters is necessary for the proper application of switching materials and devices. In the present work, a simple low-cost electrical switching analyzer has been developed for the measurement of the electrical characteristics of switching materials and devices. The system developed consists of a microcontroller-based excitation source and a high-speed data acquisition system. The design details of the excitation source, its interface with the high-speed data acquisition system and personal computer, and the details of the application software developed for automated measurements are described. Typical I-V characteristics and switching curves obtained with the system developed are also presented to illustrate the capability of the instrument developed.

A note on the equivalence of shock manifold equations

The shock manifold equation is a first order nonlinear partial differential equation, which describes the kinematics of a shockfront in an ideal gas with constant specific heats. However, it was found that there was more than one of these shock manifold equations, and the shock surface could be embedded in a one parameter family of surfaces, obtained as a solution of any of these shock manifold equations. Associated with each shock manifold equation is a set of characteristic curves called lsquoshock raysrsquo. This paper investigates the nature of various associated shock ray equations.

Nature of corrosive and abrasive wear in ball mill grinding

Laboratory results of marked-ball wear tests are used to discuss the relative significance of corrosive and abrasive wear in wet grinding. The electrochemical mechanism was investigated by correlating the corrosive wear with the corrosion current obtained from polarization curves under abrasion. Slurry rheology governs the manner in which ground slurries coat grinding balls, thereby influencing not only the grinding efficiency but also abrasive wear. The effects of percent solids and a grinding aid are illustrated.

Oxygen stoichiometry and structure of YBa2Cu3O7−δ and their relation to superconductivity

Thermogravimetric curves of the superconducting samples (0.0 ≤ δ left angle bracket0.5) of YBa2Cu3O7−δ are shown to be characteristically different from those of the non-superconducting samples (δreverse similar, equals0.5–1.0). The variation of Tc (from resistivity measurements) with δ confirms for a change from Image to Image Bands found in bright or dark field electron micrographs are shown to arise for different orientations of the [CuO2]∞ planes, causing oxygen enrichment in the boundaries. A new defect with missing Y-rows is found in the images of Y1−xBa2Cu3O7.

Stability Analysis of Composite Skew Plates Using a Dynamic Method

Stability analysis is carried out considering free lateral vibrations of simply supported composite skew plates that are subjected to both direct and shear in-plane forces. An oblique stress component representation is used, consistent with the skew-geometry of the plate. A double series, expressed in Chebyshev polynomials, is used here as the assumed deflection surface and Ritz method of solution is employed. Numerical results for different combinations of side ratios, skew angle, and in-plane loadings that act individually or in combination are obtained. In this method, the in-plane load parameter is varied until the fundamental frequency goes to zero. The value of the in-plane load then corresponds to a critical buckling load. Plots of frequency parameter versus in-plane loading are given for a few typical cases. Details of crossings and quasi degeneracies of these curves are presented.

Biomassan energia-arvon nostaminen sekundäärilämmöllä kuivaamalla

Viime aikoina ilmastonmuutos, fossiilisten polttoaineiden väheneminen ja niiden hinnan nousu ovat lisänneet merkittävästi maailmanlaajuista kiinnostusta uusiutuviin energiavaroihin. Suomessa uusiutuvien energialähteiden käytössä on jo pitkään panostettu metsäteollisuuden sivutuotevirtana tuottamaan puuperäiseen biomassaan, jota metsäteollisuus käyttää energiantuotantoonsa. Metsäteollisuuden jätevesien käsittelyssä syntyy erilaisia lietteitä, jotka joko uusiokäytetään tai hävitetään polttamalla tai sijoittamalla kaatopaikalle. Erityisesti biolietteiden uusiokäyttö on hankalaa ja kaatopaikkasijoitus tulevaisuudessa mahdotonta tai ainakin kustannuksiltaan kohtuutonta. Käytännössä liete hävitetään polttamalla ja kuivaamalla siitä tulee polttoaine. Lietteiden energiakäyttö on järkevin tapa hävittää jäteliete. Lietteiden korkean vesipitoisuuden vuoksi ne tulee kuitenkin kuivata ennen polttoa. Lietteen kuivaaminen sekundäärienergiavirralla eli metsäteollisuusprosesseissa sivutuotteena muodostuvalla ns. hukkalämmöllä lisää lietteen poltosta saatavaa energiamäärää ja korvaa fossiilisten polttoaineiden käyttöä. Tutkimuksen tavoitteena oli selvittää lietteen kuivaukseen optimaalisin kuoren ja lietteen seossuhde eri kuivausparametrejä vaihdellen. Kokeellinen työ aloitettiin rakentamalla energiatekniikan koehalliin laboratoriokokoluokan kiintopetikuivuri, jossa kuivumista tutkittiin puhaltamalla polttoainepedin läpi lämmitettyä ilmaa. Kuivattavina polttoaineina olivat kuoren ja lietteen seos tai pelkkä kuori ja liete erilaisilla massoilla ja erilaisilla prosenttisilla suhteilla ja erilaisissa lämpötiloissa. Kuivumiskäyrien määritys perustui massanmuutokseen. Koelaitteessa olivat anturit lämpötilan mittausta varten, jotta lämpötila saatiin säädettyä ja seurattua kokeen edellyttämällä tavalla. Lämpötilat ja painonmuutokset tallentuivat koetta tehdessä tietokoneelle. Kuivauskokeet osoittivat, että liete-kuori seos kuivuu hyvin kiintopedissä kun lietteen massaosuus seoksessa on korkeintaan 50 %. Lietteen massaosuuden ollessa tätä suurempi kuivaaminen ei enää ole tehokasta, mikä johtuu luultavasti ilman suuresta kanavoitumisesta kuivauspedissä. Kuorta kuivatessa lämpötilan nosto 50 °C:stä 70 °C:een oli huomattavasti tehokkaampaa kuin 70 °C:stä 90 °C:een, ajallisesti ero oli noin kaksinkertainen.

Nikotiinireseptoreiden kautta vaikuttavat lääkeaineet nikotiiniriippuvuuden ja neurologisten sairauksien hoidossa

Neuronaaliset nikotiinireseptorit liittyvät tupakkariippuvuuden lisäksi moniin neurologisiin sairauksiin, kuten Alzheimerin tautiin, skitsofreniaan, masennukseen ja tarkkaavaisuus- ja ylivilkkaushäiriöön. Nikotiinireseptorien stimulaation on tutkimuksissa havaittu parantavan kognitiota. Useat lääkeyritykset tutkivat nikotiinireseptoriagonisteja ja -antagonisteja eri neurologisten sairauksien hoidossa. Ongelmana nikotiinireseptori-agonisteja käytettäessä on reseptorissa tapahtuva desensitisaatio. Tällöin reseptori sulkeutuu, eikä aktivoidu vaikka agonistia olisi tarjolla tai sitoutuneena reseptoriin. Varsinkin alfa7-reseptori desensitoituu hyvin nopeasti agonistialtistuksen seurauksena. Reseptorien desensitoituminen voi kliinisessä käytössä aiheuttaa lääkeaineen tehon menetyksen. Perinteisen agonistin sitoutumiskohdan lisäksi nikotiinireseptorissa sijaitsee myös muita sitoutumiskohtia, joita kutsutaan allosteerisiksi sitoutumispaikoiksi. Tutkimuksissa on havaittu, että eräät allosteerisesti sitoutuvat aineet, kuten PNU-120596, voivat vahvistaa agonistin aikaansaamaa vastetta ja/tai estää reseptorin desensitoitumista. Näitä aineita kutsutaan positiivisiksi allosteerisiksi modulaattoreiksi ja niiden ajatellaan olevan vaihtoehto desensitoitumisen aiheuttamaan tehon menetyksen ongelmaan. Nikotiinireseptorien positiivisten allosteeristen modulaattorien tarkkaa vaikutusta ja sitoutumiskohtaa reseptoriin ei vielä tarkkaan tiedetä. Tutkimuksen aiheena oli karakterisoida positiivisten allosteeristen modulaattoreiden vaikutuksia alfa7-nikotiinireseptoriin. Tutkimuksessa tarkoituksena oli käyttää hyväksi laboratoriossa aiemmin tehtyä havaintoa, jonka mukaan alfa7-nikotiinireseptorin transmembraaniosan aminohappoon tehdyn mutaation L247T seurauksena positiiviset allosteeriset modulaattorit muuttuvat agonisteiksi. Haluttiin selvittää, kuinka agonistin sitoutumiskohtaan kohdennettua mutageneesiä käyttäen tehty mutaatio W149M tai W149F vaikuttavat PNU-120596:n kykyyn toimia agonistina alfa7L247T reseptoriin. Asetyylikoliini toimi konventionaalisen agonistin mallina tutkimuksessa. Tutkimuksen toinen tavoite oli tehdä mutaatio M253Lalfa7-reseptorin transmembraaniosaan. Mutaation on todettu estävän allosteeristen potentiaattoreiden kykyä voimistaa agonistin aikaansaamaa vastetta. Tarkoitus oli tutkia millaisia vaikutuksia M253L-mutaatiolla on allosteerisen potentiaattorin kykyyn toimia agonistina L247T-mutaation sisältävään reseptoriin. Mutatoidun reseptorin mRNA mikroinjektoitiin oosyyttiin ja elektrofysiologian avulla tutkittiin ilmennettyjen reseptorien toimintaa käyttäen kahden elektrodin jännitelukitus -menetelmää. Kaikki suunnitellut mutaatiot saatiin tehtyä onnistuneesti alfa7- ja alfa7L247T-reseptoreihin. Ortosteerisen sitoutumiskohdan mutaatio villin tyypin Į7-reseptorissa vaikutti hyvin voimakkaasti joko asetyylikoliinin sitoutumiseen reseptoriin tai reseptorin toimintaan, sillä asetyylikoliinilla ei reseptorista saatu mitattua vasteita. Myöskään PNU-120596 yksinään ei saanut aikaan vasteita alfa7W149M-reseptorissa. Kaksoismutatoidussa alfa7W149M/L247T-reseptorissa puolestaan havaittiin, että asetyylikoliinin annos-vaste -kuvaaja siirtyi huomattavasti enemmän oikealle kuin PNU-120596:n, kun verrattiin annos-vaste –kuvaajia alfa7L247T ja alfa7W149M/L247T–reseptoreiden välillä. Transmembraaniosan mutaatio M253L ei vaikuttanut PNU-120596:n kykyyn toimia agonistina alfa7L247T-reseptoriin, eikä sillä ollut vaikutusta asetyylikoliinin annosvaste-kuvaajiin. Tutkimus tukee aiempia havaintoja siitä, että positiivisten allosteeristen modulaattoreiden sitoutumiskohta nikotiinireseptorissa sijaitsisi transmembraaniosassa. M253L-mutaation osalta tulokset ovat hieman ristiriidassa aiempien tulosten kanssa. L247T-mutaatio vaikuttaa hyvin voimakkaasti nikotiinireseptorin toimintaan sekä sijaitsee aminohapon M253 läheisyydessä. On mahdollista, että se peittää M253L-mutaation vaikutuksen. Toisaalta voi olla, että M253 on aminohappo, joka vaikuttaa vain reseptorivasteiden voimistumiseen eikä allosteeristen potentiaattoreiden sitoutumiseen.

Mechanical Anisotropy in Crystalline Saccharin: Nanoindentation Studies

The nanoindentation technique has been employed to relate the mechanical properties of saccharin single crystals with their internal structure. Indentations were performed on (100) and (011) faces to assess the mechanical anisotropy. The load-displacement (P-h) curves indicate significant differences in the nature of the plastic deformation on the two faces. The P-h curves obtained on the (011) plane are smooth, reflecting homogeneous plasticity. However, displacement bursts (pop-ins) are observed in the P-h curves obtained on the (100) plane suggesting a discrete deformation mechanism. Marginal differences exist in the hardness and modulus on the two faces that may, in part, be rationalized, although one notes that saccharin has a largely three-dimensional close-packed structure. The structural origins of the fundamentally different deformation mechanisms on (100) and (011) are discussed in terms of the dimensionality of the hydrogen bonding networks. Down the (100) planes, the saccharin dimers are stacked and are stabilized by nonspecific van der Wants interactions mostly between aromatic rings. However, down the (011) planes, the molecules are stabilized by more directional and cross-linked C-H ... O hydrogen bonds. This anisotropy in crystal packing and interactions is reflected in the mechanical behavior on these faces. The displacements associated with the pop-ins were found to he integral multiples oldie molecule separation distances. Nanoindentation offers an opportunity to compare experimentally, and in a quantitative way, the various intermolecular interactions that fire present in a molecular crystal.

Aspiration-based utility functions in a planning model for timber flow management.

The study presents a theory of utility models based on aspiration levels, as well as the application of this theory to the planning of timber flow economics. The first part of the study comprises a derivation of the utility-theoretic basis for the application of aspiration levels. Two basic models are dealt with: the additive and the multiplicative. Applied here solely for partial utility functions, aspiration and reservation levels are interpreted as defining piecewisely linear functions. The standpoint of the choices of the decision-maker is emphasized by the use of indifference curves. The second part of the study introduces a model for the management of timber flows. The model is based on the assumption that the decision-maker is willing to specify a shape of income flow which is different from that of the capital-theoretic optimum. The utility model comprises four aspiration-based compound utility functions. The theory and the flow model are tested numerically by computations covering three forest holdings. The results show that the additive model is sensitive even to slight changes in relative importances and aspiration levels. This applies particularly to nearly linear production possibility boundaries of monetary variables. The multiplicative model, on the other hand, is stable because it generates strictly convex indifference curves. Due to a higher marginal rate of substitution, the multiplicative model implies a stronger dependence on forest management than the additive function. For income trajectory optimization, a method utilizing an income trajectory index is more efficient than one based on the use of aspiration levels per management period. Smooth trajectories can be attained by squaring the deviations of the feasible trajectories from the desired one.

Understorey vegetation as an indicator of forest site potential in Southern Finland.

The relationship between site characteristics and understorey vegetation composition was analysed with quantitative methods, especially from the viewpoint of site quality estimation. Theoretical models were applied to an empirical data set collected from the upland forests of southern Finland comprising 104 sites dominated by Scots pine (Pinus sylvestris L.), and 165 sites dominated by Norway spruce (Picea abies (L.) Karsten). Site index H100 was used as an independent measure of site quality. A new model for the estimation of site quality at sites with a known understorey vegetation composition was introduced. It is based on the application of Bayes' theorem to the density function of site quality within the study area combined with the species-specific presence-absence response curves. The resulting posterior probability density function may be used for calculating an estimate for the site variable. Using this method, a jackknife estimate of site index H100 was calculated separately for pine- and spruce-dominated sites. The results indicated that the cross-validation root mean squared error (RMSEcv) of the estimates improved from 2.98 m down to 2.34 m relative to the "null" model (standard deviation of the sample distribution) in pine-dominated forests. In spruce-dominated forests RMSEcv decreased from 3.94 m down to 3.16 m. In order to assess these results, four other estimation methods based on understorey vegetation composition were applied to the same data set. The results showed that none of the methods was clearly superior to the others. In pine-dominated forests, RMSEcv varied between 2.34 and 2.47 m, and the corresponding range for spruce-dominated forests was from 3.13 to 3.57 m.

On the uniformity of film thickness on rotating spherical substrates on a planar work holder

Curves for the uniformity in film thickness on spherical substrates are drawn for various geometries. The optimum source-to-substrate height for maximum uniformity of the film thickness is determined. These data are approximated to achieve uniform thickness on a large number of small planar substrates loaded on a large spherical substrate holder, the appropriate geometry being selected on the basis of the radius of curvature of the substrate holder.