Design, modeling and construction of a novel ablative fast pyrolysis reactor and product collection system

The objective of this work was to design, construct and commission a new ablative pyrolysis reactor and a high efficiency product collection system. The reactor was to have a nominal throughput of 10 kg/11r of dry biomass and be inherently scalable up to an industrial scale application of 10 tones/hr. The whole process consists of a bladed ablative pyrolysis reactor, two high efficiency cyclones for char removal and a disk and doughnut quench column combined with a wet walled electrostatic precipitator, which is directly mounted on top, for liquids collection. In order to aid design and scale-up calculations, detailed mathematical modelling was undertaken of the reaction system enabling sizes, efficiencies and operating conditions to be determined. Specifically, a modular approach was taken due to the iterative nature of some of the design methodologies, with the output from one module being the input to the next. Separate modules were developed for the determination of the biomass ablation rate, specification of the reactor capacity, cyclone design, quench column design and electrostatic precipitator design. These models enabled a rigorous design protocol to be developed capable of specifying the required reactor and product collection system size for specified biomass throughputs, operating conditions and collection efficiencies. The reactor proved capable of generating an ablation rate of 0.63 mm/s for pine wood at a temperature of 525 'DC with a relative velocity between the heated surface and reacting biomass particle of 12.1 m/s. The reactor achieved a maximum throughput of 2.3 kg/hr, which was the maximum the biomass feeder could supply. The reactor is capable of being operated at a far higher throughput but this would require a new feeder and drive motor to be purchased. Modelling showed that the reactor is capable of achieving a reactor throughput of approximately 30 kg/hr. This is an area that should be considered for the future as the reactor is currently operating well below its theoretical maximum. Calculations show that the current product collection system could operate efficiently up to a maximum feed rate of 10 kg/Fir, provided the inert gas supply was adjusted accordingly to keep the vapour residence time in the electrostatic precipitator above one second. Operation above 10 kg/hr would require some modifications to the product collection system. Eight experimental runs were documented and considered successful, more were attempted but due to equipment failure had to be abandoned. This does not detract from the fact that the reactor and product collection system design was extremely efficient. The maximum total liquid yield was 64.9 % liquid yields on a dry wood fed basis. It is considered that the liquid yield would have been higher had there been sufficient development time to overcome certain operational difficulties and if longer operating runs had been attempted to offset product losses occurring due to the difficulties in collecting all available product from a large scale collection unit. The liquids collection system was highly efficient and modeling determined a liquid collection efficiency of above 99% on a mass basis. This was validated due to the fact that a dry ice/acetone condenser and a cotton wool filter downstream of the collection unit enabled mass measurements of the amount of condensable product exiting the product collection unit. This showed that the collection efficiency was in excess of 99% on a mass basis.

Public libraries, citizens and the post democracy

This essay explores the relationship between the development of public libraries in the context of an increasingly market-dominated economy and marketised society. It argues that although neo-liberalism as a policy goal and practice has taken different forms over time, there are common themes in terms of its emphasis on market values, privatisation, and the support of measures that reduce the role of public funding and the state in the provision of public services. This has led some commentators to express concerns that the meaning and practice of citizenship and democracy is being transformed, managed or otherwise diminished. These concerns are compounded by changes effected by new digital technology. Imbricated with this issue are debates surrounding the future of the public library, and attempts by librarians and others to reinvent and reimagine its purpose. With reference to some innovative initiatives in the USA and Scandinavia, it is suggested that public libraries, through their service and spatial rearticulation, can conceivably help strengthen and revitalise public democracy and the public sphere.

Combining data driven programming with component based software development:with applications in geovisualisation and dynamic data driven application systems

Software development methodologies are becoming increasingly abstract, progressing from low level assembly and implementation languages such as C and Ada, to component based approaches that can be used to assemble applications using technologies such as JavaBeans and the .NET framework. Meanwhile, model driven approaches emphasise the role of higher level models and notations, and embody a process of automatically deriving lower level representations and concrete software implementations. The relationship between data and software is also evolving. Modern data formats are becoming increasingly standardised, open and empowered in order to support a growing need to share data in both academia and industry. Many contemporary data formats, most notably those based on XML, are self-describing, able to specify valid data structure and content, and can also describe data manipulations and transformations. Furthermore, while applications of the past have made extensive use of data, the runtime behaviour of future applications may be driven by data, as demonstrated by the field of dynamic data driven application systems. The combination of empowered data formats and high level software development methodologies forms the basis of modern game development technologies, which drive software capabilities and runtime behaviour using empowered data formats describing game content. While low level libraries provide optimised runtime execution, content data is used to drive a wide variety of interactive and immersive experiences. This thesis describes the Fluid project, which combines component based software development and game development technologies in order to define novel component technologies for the description of data driven component based applications. The thesis makes explicit contributions to the fields of component based software development and visualisation of spatiotemporal scenes, and also describes potential implications for game development technologies. The thesis also proposes a number of developments in dynamic data driven application systems in order to further empower the role of data in this field.

Development of an e-business selection framework for manufacturing SMEs : a study of the printing industry

The aim of the research is to develop an e-business selection framework for small and medium enterprises (SMEs) by integrating established techniques in planning. The research is case based, comprising four case studies carried out in the printing industry for the purpose of evaluating the framework. Two of the companies are from Singapore, while the other two are from Guangzhou, China and Jinan, China respectively. To determine the need of an e-business selection framework for SMEs, extensive literature reviews were carried out in the area of e-business, business planning frameworks, SMEs and the printing industry. An e-business selection framework is then proposed by integrating the three established techniques of the Balanced Scorecard (BSC), Value Chain Analysis (VCA) and Quality Function Deployment (QFD). The newly developed selection framework is pilot tested using a published case study before actual evaluation is carried out in four case study companies. The case study methodology was chosen because of its ability to integrate diverse data collection techniques required to generate the BSC, VCA and QFD for the selection framework. The findings of the case studies revealed that the three techniques of BSC, VCA and QFD can be integrated seamlessly to complement on each other’s strengths in e-business planning. The eight-step methodology of the selection framework can provide SMEs with a step-by-step approach to e-business through structured planning. Also, the project has also provided better understanding and deeper insights into SMEs in the printing industry.

Development of the MAX randomisation technique

During the last decade the use of randomised gene libraries has had an enormous impact in the field of protein engineering. Such libraries comprise many variations of a single gene in which codon replacements are used to substitute key residues of the encoded protein. The expression of such libraries generates a library of randomised proteins which can subsequently be screened for desired or novel activities. Randomisation in this fashion has predominantly been achieved by the inclusion of the codons NNN or NNGCor T, in which N represents any of the four bases A,C,G, or T. The use of thesis codons however, necessities the cloning of redundant codons at each position of randomisation, in addition to those required to encode the twenty possible amino acid substitutions. As degenerate codons must be included at each position of randomisation, this results in a progressive loss of randomisation efficiency as the number of randomised positions is increased. The ratio of genes to proteins in these libraries rises exponentially with each position of randomisation, creating large gene libraries, which generate protein libraries of limited diversity upon expression. In addition to these problems of library size, the cloning of redundant codons also results in the generation of protein libraries in which substituted amino acids are unevenly represented. As several of the randomised codons may encode the same amino acid, for example serine which is encoded six time using the codon NNN, an inherent bias may be introduced into the resulting protein library during the randomisation procedure. The work outlined here describes the development of a novel randomisation technique aimed at a eliminating codon redundancy from randomised gene libraries, thus addressing the problems of library size and bias, associated with the cloning of redundant codons.

Increased diversity of libraries from libraries: chemoinformatic analysis of bis-diazacyclic libraries

Combinatorial libraries continue to play a key role in drug discovery. To increase structural diversity, several experimental methods have been developed. However, limited efforts have been performed so far to quantify the diversity of the broadly used diversity-oriented synthetic (DOS) libraries. Herein we report a comprehensive characterization of 15 bis-diazacyclic combinatorial libraries obtained through libraries from libraries, which is a DOS approach. Using MACCS keys, radial and different pharmacophoric fingerprints as well as six molecular properties, it was demonstrated the increased structural and property diversity of the libraries from libraries over the individual libraries. Comparison of the libraries to existing drugs, NCI Diversity and the Molecular Libraries Small Molecule Repository revealed the structural uniqueness of the combinatorial libraries (mean similarity < 0.5 for any fingerprint representation). In particular, bis-cyclic thiourea libraries were the most structurally dissimilar to drugs retaining drug-like character in property space. This study represents the first comprehensive quantification of the diversity of libraries from libraries providing a solid quantitative approach to compare and contrast the diversity of DOS libraries with existing drugs or any other compound collection.

Development of a computerised library system in the construction industry

This thesis examines the ways that libraries have employed computers to assist with housekeeping operations. It considers the relevance of such applications to company libraries in the construction industry, and describes more specifically the development of an integrated cataloguing and loan system. A review of the main features in the development of computerised ordering, cataloguing and circulation control systems shows that fully integrated packages are beginning to be completed, and that some libraries are introducing second generation programs. Cataloguing is the most common activity to be computerised, both at national and company level. Results from a sample of libraries in the construction industry suggest that the only computerised housekeeping system is at Taylor Woodrow. Most of the firms have access to an in-house computer, and some of the libraries, particularly those in firms of consulting engineers, might benefit from computerisation, but there are differing attitudes amongst the librarians towards the computer. A detailed study of the library at Taylor Woodrow resulted in a feasibility report covering all the areas of its activities. One of the main suggestions was the possible use of a computerised loans and cataloguing system. An integrated system to cover these two areas was programmed in Fortran and implemented. This new system provides certain benefits and saves staff time, but at the cost of time on the computer. Some improvements could be made by reprogramming, but it provides a general system for small technical libraries. A general equation comparing costs for manual and computerised operations is progressively simplified to a form where the annual saving from the computerised system is expressed in terms of staff and computer costs and the size of the library. This equation gives any library an indication of the savings or extra cost which would result from using the computerised system.

The development of a solar wall module using a selective surface

A need was indicated for the identification of a possible new solar energy product to improve the sales potential of a metal film with a selective surface, manufactured by the industriaI sponsor of this project (INCO). A possible way of overcoming the disadvantageous economics of solar energy collection was identified. This utilised the collection of solar energy by the walls of buildings constructed in such a manner as to allow the transfer of energy into the building, whilst providing adequate thermal insulation in the absence of sunlight. The actual collection element of the wall, being metallic, is also capable of performing the function of a low temperature heating .system in the absence of sunlight. As a result of this, the proposed system, by displacing both the wall and centraI heating system which would otherwise be necessary, demonstrates economic benefits over systems which are constructed solely for the purpose of collecting solar energy. The necessary thermodynamic and meteorological. characteristics and data: are established, and applied to a typical urban site in the North of England, for a typical average year, with and without a shading device incorporated into the construction. It is concluded that the proposed system may offer considerable benefit in reducing the effective heating season in all orientations of wall.

Design, synthesis and development of PDE5 inhibitors

This research project is concerned with the design, synthesis and development of new phosphodiesterase 5 (PDE5) inhibitors with improved selectivities and lower toxicities. Two series of a 5 member and a 6 member ring fused heterocyclic compounds were designed, and synthesized. By alteration of starting materials and fragments, two virtual libraries, each is consisted of close to hundred compounds, were obtained successfully. The screening of sexual stimulation activity with rabbits demonstrated both groups of compounds were able to stimulate rabbit penile erection significantly. The following toxicity studies revealed 2-(substituted-sulfonylphenyl)-imidazo [1,5-a]-1,3,5-triazine-4-(3H)-one group possessed an unacceptable toxicity with oral LD50 about 200mg/kg; while 2-(substituted-sulfonylphenyl)-pyrrolo[2,3-d]pyrimidin-4-one group showed an acceptable toxicity with oral LD50 over 2000mg/kg. The continued bioactivity studies showed yonkenafil, the representative of 2-(substituted-sulfonylphenyl)-pyrrolo[2,3-d]pyrimidin-4-one group, has a better selectivity towards PDE5 and PDE6 than sildenafil and a better overall profile of sexual stimulation on animals than sildenafil. Chronic toxicity studies of yonkenafil further confirmed yonkenafil did not cause any serious side effect and damage on animal models and most actions were explainable. Based on evidences of the above studies, yonkenafil were recommended to enter clinical trials by the regulation authority of China, SFDA. Currently yonkenafil has been through the Phase I clinical trials and ready to progress into Phase II. Hopefully, yonkenafil will provide an alternative to the ED patients in the future.

Ireland:from racism without ‘race’, to ‘racism without racists’

The Irish have been relentlessly racialized in their diaspora settings, yet little historical work engages with “race” to understand Irish history on the island of Ireland. This article provides an interpretation of two key periods of Irish history—the second half of the sixteenth century and the period since 1996—through the lens of racialization. I argue that Ireland's history is exceptional in its capacity to reveal key elements of the history of the development of race as an idea and a set of practices. The English colonization of Ireland was underpinned by a form of racism reliant on linking bodies to unchanging hierarchically stacked cultures, without reference to physical differences. For example, the putative unproductiveness of the Gaelic Irish not only placed them at a lower level of civilization than the industrious English but it also authorizes increasingly draconian ways of dealing with the Irish populace. The period since 1996, during which Ireland has become a country of immigration, illustrates how racism has undergone a transformation into the object of official state policies to eliminate it. Yet it flourishes as part of a globalized set of power relations that has brought immigrants to the developing Irish economy. In response to immigration the state simultaneously exerts neoliberal controls and reduces pathways to citizenship through residence while passing antiracism legislation. Today, the indigenous nomadic Travellers and asylum seekers are the ones that are seen as pathologically unproductive. Irish history thus demonstrates that race is not only about color but also very much about culture. It also illustrates notable elements of the West's journey from racism without race to racism without racists.

Sustainable development

The United Nations has pithily defined sustainable development as progress that ‘meets the needs of the present without compromising the ability of future generations to meet their own needs’. But sustainable development remains highly contested and is subject to a wide variety of interpretations, applications, and criticisms. Moreover, those seeking fully to understand this critical concept are confronted with a (sometimes dispiritingly) voluminous body of scholarly, polemical, and journalistic writing. Edited by the acclaimed author of Understanding Sustainable Development (Earthscan, 2008), this new title from Routledge’s Critical Concepts in the Environment series answers the need for an authoritative reference work to make sense of the vast literature on sustainable development, and the continuing explosion in research output. Drawing on a wide variety of sources that take full cognizance of the rich background and necessary adaptability of the concept to the imperatives of time, place, and culture, and which emphasize its connected and transdisciplinary nature, the editor has brought together in four volumes the canonical and the best cutting-edge work to produce an indispensable ‘mini library’. The collection covers the history, mediation, application, and likely future orientations of sustainable development, both conceptually and as a continually emerging practice. Sustainable Development is fully indexed and includes comprehensive introductions, newly written by the editor, which place the collected materials in their historical and intellectual context. It is an essential reference collection and is certain to be valued by scholars and students—as well as serious policy-makers and practitioners—as a vital one-stop research and pedagogic resource.

Tiger, tiger, burning bright? Industrial policy “lessons” from Ireland for small African economies

The chapter examines possibilities for industrial policy in African countries through the lens of lessons that can be learned from the industrial policy approaches pursued in Ireland as well as in East Asia. As latecomers to industrialization, the small African economies are well positioned to undertake such an exercise, we suggest. This chapter provides some novel insights by providing a comparison between Ireland and the small African economies. To our knowledge such a comparison offers a unique contribution. Cognizant of the fact that a “one size fits all” approach to industrial policy is not appropriate in the African context, we argue in favor of the adoption of a more “holistic” approach to industrial policy in these economies. Such an approach we argue should focus simultaneously on demand and supply factors of industrial development, and on microeconomic as well as macroeconomic factors.

Supply chain management diffusion among firms in the Republic of Ireland

The changing business environment has sharpened the focus on the need for robust approaches to supply chain management (SCM) and the improvement of supply chain capability and performance. This is particularly the case in Ireland, which has the natural disadvantage of a location peripheral to significant markets and sources of raw materials which results in relatively high transport and distribution costs. Therefore, in order to gain insights into current levels of diffusion of SCM, a survey was conducted among 776 firms in the Republic of Ireland. The empirical results suggest that there is a need for more widespread adoption of SCM among Irish firms. This is particularly the case in relation to the four main elements of SCM excellence reported in this paper. The design of supply chain solutions is a highly skilled, knowledge-intensive and complex activity, reflected in a shift from 'box moving' to the design and implementation of customised supply chain solutions. Education and training needs to be addressed by stimulating the development of industry-relevant logistics and SCM resources and skills.

An Investigation into Outsourcing Practice in Ireland:A New Direction in Logistics and Supply Chain Management

Companies are increasingly focusing on the development of core competencies as an integral part of their overall strategy development and implementation. The corollary of this is that functions regarded as being non-core are being outsourced. This paper investigates the case for and against outsourcing and in addition what is happening in Ireland regards outsourcing. Furthermore to analysis of current literature in the field, an Irish-wide postal and e-mail survey, as well as three case studies revealed many interesting facts. The key findings of the work are manufacturing outsourcing is now the most popular function to be outsourced for both small to medium sized enterprises (SMEs) and large enterprises. Large enterprises (LEs) do not prepare or examine hidden costs more than SMEs, nor do they differ much in relation to the use of consultants. Furthermore, the importance of time spent on preparing or producing contract, and the impact the contract can have on the supplier-buyer relation do not differ significantly. It was found that most companies outsourced within Ireland, which led to further investigation in that area. In relation to logistics outsourcing specifically, this has become very important in the supply chain over the last 20 years as an activity that was traditionally handled by firms as a support function. At that time logistics activities such as warehousing, distribution, transportation and inventory management were given low priority compared with other business functions within the organisation. However, since the customer has become more demanding, the logistics function has now become a source of competitive advantage and there has been a growing emphasis on providing good customer service.

Microarray-formatted clinical biomarker assay development using peptide aptamers to anterior gradient-2

Anterior gradient-2 protein was identified using proteomic technologies as a p53 inhibitor which is overexpressed in human cancers, and this protein presents a novel pro-oncogenic target with which to develop diagnostic assays for biomarker detection in clinical tissue. Combinatorial phage-peptide libraries were used to select 12 amino acid polypeptide aptamers toward anterior gradient-2 to determine whether methods can be developed to affinity purify the protein from clinical biopsies. Selecting phage aptamers through four rounds of screening on recombinant human anterior gradient-2 protein identified two classes of peptide ligand that bind to distinct epitopes on anterior gradient-2 protein in an immunoblot. Synthetic biotinylated peptide aptamers bound in an ELISA format to anterior gradient-2, and substitution mutagenesis further minimized one polypeptide aptamer to a hexapeptide core. Aptamers containing this latter consensus sequence could be used to affinity purify to homogeneity human anterior gradient-2 protein from a single clinical biopsy. The spotting of a panel of peptide aptamers onto a protein microarray matrix could be used to quantify anterior gradient-2 protein from crude clinical biopsy lysates, providing a format for quantitative screening. These data highlight the utility of peptide combinatorial libraries to acquire rapidly a high-affinity ligand that can selectively bind a target protein from a clinical biopsy and provide a technological approach for clinical biomarker assay development in an aptamer microarray format.