Water quality assessment and characterisation of chlorophyll-a variability related to river discharges, within the southeastern Bay of Biscay : evaluation and development of chlorophyll-a algorithms for MODIS and MERIS imagery

222 p. : il.

Estudio de la trabeculectomía experimental mediante implante de PLGA como dispositivo de liberación controlada de fármacos

225 p. : il.

A Self-Referencing Intensity Based Polymer Optical Fiber Sensor for Liquid Detection

A novel self-referencing fiber optic intensity sensor based on bending losses of a partially polished polymer optical fiber (POF) coupler is presented. The coupling ratio (K) depends on the external liquid in which the sensor is immersed. It is possible to distinguish between different liquids and to detect their presence. Experimental results for the most usual liquids found in industry, like water and oil, are given. K value increases up to 10% from the nominal value depending on the liquid. Sensor temperature dependence has also been studied for a range from 25 degrees C (environmental condition) to 50 degrees C. Any sector requiring liquid level measurements in flammable atmospheres can benefit from this intrinsically safe technology.

E-learning y la calibración de ítems de test : teoría de respuesta al ítem versus calibración basada en juicios de expertos. Un estudio jurídico

XVII, 352 p.

Telemonitorización en tiempo real del Síndrome de Apneas-Hipopneas del Sueño (SAHS) mediante pulsioximetría domiciliaria

191 p.

An Instrumented Indentation Method for Young's Modulus Measurement with Accuracy Estimation

The relationships between indentation responses and Young's modulus of an indented material were investigated by employing dimensional analysis and finite element method. Three representative tip bluntness geometries were introduced to describe the shape of a real Berkovich indenter. It was demonstrated that for each of these bluntness geometries, a set of approximate indentation relationships correlating the ratio of nominal hardness/reduced Young's modulus H (n) /E (r) and the ratio of elastic work/total work W (e)/W can be derived. Consequently, a method for Young's modulus measurement combined with its accuracy estimation was established on basis of these relationships. The effectiveness of this approach was verified by performing nanoindentation tests on S45C carbon steel and 6061 aluminum alloy and microindentation tests on aluminum single crystal, GCr15 bearing steel and fused silica.

Experimental Demonstration Of A New Concept Of Drag Reduction And Thermal Protection For Hypersonic Vehicles

A new idea of drag reduction and thermal protection for hypersonic vehicles is proposed based on the combination of a physical spike and lateral jets for shock-reconstruction. The spike recasts the bow shock in front of a blunt body into a conical shock, and the lateral jets work to protect the spike tip from overheating and to push the conical shock away from the blunt body when a pitching angle exists during flight. Experiments are conducted in a hypersonic wind tunnel at a nominal Mach number of 6. It is demonstrated that the shock/shock interaction on the blunt body is avoided due to injection and the peak pressure at the reattachment point is reduced by 70% under a 4A degrees attack angle.

Formas básicas de representación y ejercicios de aprendizaje en dibujo (Un estudio basado en la observación de un grupo de alumnos adultos)

199 p. : il.

An evaluation of geographic and annual variation in morphometric characters and gill-raker counts of yellowfin tuna, Thunnus albacares, from the Pacific Ocean

ENGLISH: Samples of yellowfin tuna, Thunnus albacares, collected from five areas of the Pacific Ocean (Mexico, Ecuador, Australia, Japan, and Hawaii) between January and May of 1988 and 1990 were examined for spatiotemporal variation in morphometric characters and gill-raker counts. 'Iwo-factor analysis of variance, with area and year treated as grouping factors, indicated a significant difference in the means of the total gill-raker counts among fish from different areas, but no significant difference between fish caught in different years. The morphometric data were adjusted by allometric formulae to remove size effects. The correct classification rates for the five groups, using discriminant function analysis, based on adjusted morphometric characters, were 77.60/0 for the samples from 1988 and 74.40/0 for those from 1990. These are 72.00/0 and 68.00/0 (Cohen's kappa statistic) better than would have occurred chance. The pattern of geographic variability, however, is unstable for these two years, thus requiring separate discriminant functions for each year. Although there is annual variability in the morphometric characters, these results demonstrate that the stocks examined are morphometrically distinguishable and that their phenetic relationships reflect their geographic origin. SPANISH: Se examinaron muestras de atún aleta amarilla, Thunnus albacares, tomadas de cinco áreas del Océano Pacífico (México, Ecuador, Australia, Japón, y Hawaii) entre enero y mayo de 1988 y 1990, para descubrir variaciones espaciotemporales en las características morfométricas y los conteos de branquiespinas. Un análisis de varianza de dos factores, con área y año como factores de agrupación, indicó una diferencia significativa en los promedios de los conteos de branquiespinas totales entre peces de distintas áreas, pero ninguna entre peces capturados en distintos años. Se ajustaron los datos morfométricos con fórmulas alométricas para eliminar los efectos de la talla del pez. En un análisis de función discriminante, las tasas de clasificación correcta de los cinco grupos, basadas en características morfométricas ajustadas, fueron 77.60/0 para las muestras de 1988 y 74.40/0 para aquellas de 1990. Estas cifras son 72.00/0 y 68.00/0 (estadístico de kappa de Cohen) mejores de lo que se hubiera obtenido al azar. Sin embargo, la variabilidad geográfica es inestable en estos dos años, requiriendo por lo tanto funciones discriminantes separadas para cada año. Aunque existe variabilidad anual en las características morfométricas, estos resultados demuestran que los stocks examinados son morfamétricamente distinguibles, y que su relación fenética refleja su origen geográfico. (PDF contains 31 pages.)

El arte como mediador entre el artista y el trauma. Acercamientos al arte desde el psicoanalisis y la escultura de Louise Bourgeois

411 p. : il., col.

Catches per unit of effort of bigeye tuna: a new analysis with regression trees and simulated annealing

ENGLISH: We analyzed catches per unit of effort (CPUE) from the Japanese longline fishery for bigeye tuna (Thunnus obesus) in the central and eastern Pacific Ocean (EPO) with regression tree methods. Regression trees have not previously been used to estimate time series of abundance indices fronl CPUE data. The "optimally sized" tree had 139 parameters; year, month, latitude, and longitude interacted to affect bigeye CPUE. The trend in tree-based abundance indices for the EPO was similar to trends estimated from a generalized linear model and fronl an empirical model that combines oceanographic data with information on the distribution of fish relative to environmental conditions. The regression tree was more parsimonious and would be easier to implement than the other two nl0dels, but the tree provided no information about the nlechanisms that caused bigeye CPUEs to vary in time and space. Bigeye CPUEs increased sharply during the mid-1980's and were more variable at the northern and southern edges of the fishing grounds. Both of these results can be explained by changes in actual abundance and changes in catchability. Results from a regression tree that was fitted to a subset of the data indicated that, in the EPO, bigeye are about equally catchable with regular and deep longlines. This is not consistent with observations that bigeye are more abundant at depth and indicates that classification by gear type (regular or deep longline) may not provide a good measure of capture depth. Asimulated annealing algorithm was used to summarize the tree-based results by partitioning the fishing grounds into regions where trends in bigeye CPUE were similar. Simulated annealing can be useful for designing spatial strata in future sampling programs. SPANISH: Analizamos la captura por unidad de esfuerzo (CPUE) de la pesquería palangrera japonesa de atún patudo (Thunnus obesus) en el Océano Pacifico oriental (OPO) y central con métodos de árbol de regresión. Hasta ahora no se han usado árboles de regresión para estimar series de tiempo de índices de abundancia a partir de datos de CPUE. EI árbol de "tamaño optimo" tuvo 139 parámetros; ano, mes, latitud, y longitud interactuaron para afectar la CPUE de patudo. La tendencia en los índices de abundancia basados en árboles para el OPO fue similar a las tendencias estimadas con un modelo lineal generalizado y con un modelo empírico que combina datos oceanográficos con información sobre la distribución de los peces en relación con las condiciones ambientales. EI árbol de regresión fue mas parsimonioso y seria mas fácil de utilizar que los dos otros modelos, pero no proporciono información sobre los mecanismos que causaron que las CPUE de patudo valiaran en el tiempo y en el espacio. Las CPUE de patudo aumentaron notablemente a mediados de los anos 80 y fueron mas variables en los extremos norte y sur de la zona de pesca. Estos dos resultados pueden ser explicados por cambios en la abundancia real y cambios en la capturabilidad. Los resultados de un arbal de regresión ajustado a un subconjunto de los datos indican que, en el OPO, el patudo es igualmente capturable con palangres regulares y profundos. Esto no es consistente con observaciones de que el patudo abunda mas a profundidad e indica que clasificación por tipo de arte (palangre regular 0 profundo) podría no ser una buena medida de la profundidad de captura. Se uso un algoritmo de templado simulado para resumir los resultados basados en el árbol clasificando las zonas de pesca en zonas con tendencias similares en la CPUE de patudo. El templado simulado podría ser útil para diseñar estratos espaciales en programas futuros de muestreo. (PDF contains 45 pages.)

Procesamiento de Imágenes Satelitales Multiespectrales

En este proyecto se ha realizado el procesamiento de una imagen satelital multiespectral de México concretamente centrada en la región del Lago de Chapala. Este proceso tiene como objetivo la distinción de tierra y agua mediante un proceso semi-automático utilizando distintos software o herramientas informáticas. Dentro del proyecto podemos destacar ciertas fases u operaciones como el preprocesado realizado a la imagen satelital donde se han aplicado una serie de transformaciones, la aplicación de técnicas de clasificación supervisada mediante la realización de entrenamiento y testeo con regiones de interés extraídas de la imagen satelital para la obtención de clasificadores o la aplicación de estos clasificadores en la binarización de la imagen, obteniendo una imagen binaria donde un valor representa agua y otro tierra. También podemos destacar el empleo de índices de agua y vegetación como una herramienta fundamental en la detección y en el análisis de cuerpos de agua. Éstos han marcado la calidad de los resultados obtenidos en el proyecto.

Welt-Fischereierträge 1995: 112,9 Mio. Tonnen

Total world fishery production 1995, including aquaculture, of fish, shellfish, frogs and turtles – reached a new record of 112.9 million tones live weight. Marine fishery had a share of 91,9 million tonnes (+ 0.4) and freshwater fishery 21.0 million tonnes (+ 2.0). Not included in these figures are seals, whales, crocodiles and algae. Marine mammals and crocodiles are listed by number of killed individuals, and not given by weight. Algae alone represent a biomass of 7.1 million tonnes, but are not included by the FAO in the nominal „total production of the world“ either. About two thirds of the marine fishery harvest was used for human consumption, one third for industrial purposes – mainly production of fish meal and fish oil.

New technologies driving decade-bandwidth radio astronomy : quad-ridged flared horn and compound-semiconductor LNAs

Among the branches of astronomy, radio astronomy is unique in that it spans the largest portion of the electromagnetic spectrum, e.g., from about 10 MHz to 300 GHz. On the other hand, due to scientific priorities as well as technological limitations, radio astronomy receivers have traditionally covered only about an octave bandwidth. This approach of "one specialized receiver for one primary science goal" is, however, not only becoming too expensive for next-generation radio telescopes comprising thousands of small antennas, but also is inadequate to answer some of the scientific questions of today which require simultaneous coverage of very large bandwidths.

This thesis presents significant improvements on the state of the art of two key receiver components in pursuit of decade-bandwidth radio astronomy: 1) reflector feed antennas; 2) low-noise amplifiers on compound-semiconductor technologies. The first part of this thesis introduces the quadruple-ridged flared horn, a flexible, dual linear-polarization reflector feed antenna that achieves 5:1-7:1 frequency bandwidths while maintaining near-constant beamwidth. The horn is unique in that it is the only wideband feed antenna suitable for radio astronomy that: 1) can be designed to have nominal 10 dB beamwidth between 30 and 150 degrees; 2) requires one single-ended 50 Ohm low-noise amplifier per polarization. Design, analysis, and measurements of several quad-ridged horns are presented to demonstrate its feasibility and flexibility.

The second part of the thesis focuses on modeling and measurements of discrete high-electron mobility transistors (HEMTs) and their applications in wideband, extremely low-noise amplifiers. The transistors and microwave monolithic integrated circuit low-noise amplifiers described herein have been fabricated on two state-of-the-art HEMT processes: 1) 35 nm indium phosphide; 2) 70 nm gallium arsenide. DC and microwave performance of transistors from both processes at room and cryogenic temperatures are included, as well as first-reported measurements of detailed noise characterization of the sub-micron HEMTs at both temperatures. Design and measurements of two low-noise amplifiers covering 1--20 and 8—50 GHz fabricated on both processes are also provided, which show that the 1--20 GHz amplifier improves the state of the art in cryogenic noise and bandwidth, while the 8--50 GHz amplifier achieves noise performance only slightly worse than the best published results but does so with nearly a decade bandwidth.

Probabilistic robust control : theory and applications

In this work, the development of a probabilistic approach to robust control is motivated by structural control applications in civil engineering. Often in civil structural applications, a system's performance is specified in terms of its reliability. In addition, the model and input uncertainty for the system may be described most appropriately using probabilistic or "soft" bounds on the model and input sets. The probabilistic robust control methodology contrasts with existing H∞/μ robust control methodologies that do not use probability information for the model and input uncertainty sets, yielding only the guaranteed (i.e., "worst-case") system performance, and no information about the system's probable performance which would be of interest to civil engineers.

The design objective for the probabilistic robust controller is to maximize the reliability of the uncertain structure/controller system for a probabilistically-described uncertain excitation. The robust performance is computed for a set of possible models by weighting the conditional performance probability for a particular model by the probability of that model, then integrating over the set of possible models. This integration is accomplished efficiently using an asymptotic approximation. The probable performance can be optimized numerically over the class of allowable controllers to find the optimal controller. Also, if structural response data becomes available from a controlled structure, its probable performance can easily be updated using Bayes's Theorem to update the probability distribution over the set of possible models. An updated optimal controller can then be produced, if desired, by following the original procedure. Thus, the probabilistic framework integrates system identification and robust control in a natural manner.

The probabilistic robust control methodology is applied to two systems in this thesis. The first is a high-fidelity computer model of a benchmark structural control laboratory experiment. For this application, uncertainty in the input model only is considered. The probabilistic control design minimizes the failure probability of the benchmark system while remaining robust with respect to the input model uncertainty. The performance of an optimal low-order controller compares favorably with higher-order controllers for the same benchmark system which are based on other approaches. The second application is to the Caltech Flexible Structure, which is a light-weight aluminum truss structure actuated by three voice coil actuators. A controller is designed to minimize the failure probability for a nominal model of this system. Furthermore, the method for updating the model-based performance calculation given new response data from the system is illustrated.