Efficient excitations of radially and azimuthally polarized Nd 3+:YAG ceramic microchip laser by use of subwavelength multilayer concentric gratings composed of Nb2O5/SiO2

Cylindrical vector beams were produced from laser diode end-pumped Nd:YAG ceramic microchip laser by use of two types of subwavelength multilayer gratings as the axisymmetric-polarization output couplers respectively. The grating mirrors are composed of high- and low-refractive-index (Nb2O5/SiO2) layers alternately while each layer is shaped into triangle and concentric corrugations. For radially polarized laser output, the beam power reached 610mW with a polarization extinction ratio ( PER) of 61: 1 and a slope efficiency of 68.2%; for azimuthally polarized laser output, the beam power reached 626mW with a PER of 58: 1 and a slope efficiency of 47.6%. In both cases, the laser beams had near-diffraction limited quality. Small differences of beam power, PER and slope efficiency between radially and azimuthally polarized laser outputs were not critical, and could be minimized by further optimized adjustment to laser cavity and the reflectances of respective grating mirrors. The results manifested, by use of the photonic crystal gratings mirrors and end-pumped microchip laser configuration, CVBs can be generated efficiently with high modal symmetry and polarization purity. (C) 2008 Optical Society of America.

Dual-wavelength competitive output in Nd:Y3Sc1.5Al3.5O12 ceramic disk laser

In this paper, we demonstrated a dual-wavelength competitive output in Nd:Y3SC1.5Al3.5O12 ceramic disk laser. Different dual-wavelength output behaviors for Nd:YSAG and Nd:YAG ceramic disk laser were investigated and discussed. By applying the energy transfer model, we suggested the reasonable explanation for this new phenomenon as the disordered replacing of Al3+ ions by Sc3+ ions. The main advantage of the dual-wavelength ceramic laser is the possibility to serve as the seed source to generate Terahertz radiation. (C) 2008 Elsevier B.V. All rights reserved.

Intense greeen upconversion luminescence in Er3+: Yb3+ codoped fluorophosphate glass ceramic containing SrTe5O11 nanocrystals

Er3+:Yb3+ codoped tellurite-fluorophosphate (TFP) glass ceramic exhibits much stronger upconversion luminescence. The intensity of the 540 nm green light and 651 nm red light of the TFP glass ceramic is 120 times and 44 times stronger than that of the fluorophospahte (FP) glass, respectively. XRD analysis shows that the nanocrystal in TFP glass ceramic is SrTe5O11. TFP glass ceramic also displays much higher upconversion fluorescence lifetime and crystallization stability. The narrow and strong peak at 540 nm is very ideal for practical upconversion luminescence realization. This work is a new trial for exploring non-PbF2 involved nanocrystal upconversion glass ceramics.

New transparent Er3+-doped oxyfluoride tellurite glass ceramic with improved near infrared and up-conversion fluorescence properties

Transparent glass ceramics have been obtained by nucleation and growth of Y2Te6O15 or Er2Te5O13 cubic phase in a new Er3+-doped oxyfluoride tellurite glass. Effect of beat treatment on absorption spectra, luminescence and up-conversion properties in the oxyfluoride tellurite glass has been investigated. With heat treatment the ultraviolet absorption edge red shifted evidently for the oxyfluoride telluride glass. The near infrared emission that corresponds to Er3+:I-4(13/2)-> I-4(15/2) can be significantly enhanced after heat treatment. Under 980 nm LD pumping, red and green up-conversion intensity of Er3+ in the glass ceramic can be observed much stronger than that in the base glass. (C) 2006 Elsevier B.V. All rights reserved.

Broadband optical amplification in silicate glass-ceramic containing beta-Ga2O3 : Ni2+ nanocrystals

We demonstrate broadband optical amplification at 1.3 mu m in silicate glass-ceramics containing beta-Ga2O3:Ni2+ nanocrystals with 980 nm excitation for the first time. The optical gain efficiency is calculated to be about 0.283 cm(-1) when the excitation power is 1.12 W. The optical gain shows similar wavelength dependence to luminescence properties. (C) 2007 Optical Society of America.

Exposição ao material particulado 2,5 m coletado em vias de alto tráfego da cidade do Rio de Janeiro: avaliação mutagênica, genotóxica e determinação de risco à saúde induzido por hidrocarbonetos policíclicos aromáticos

A mutagenicidade do material particulado é atribuída primeiramente aos hidrocarbonetos policíclicos aromáticos (HPA). Investigamos a atividade mutagênica do material particulado (MP2,5) em amostras coletadas em três pontos da cidade do Rio de Janeiro. As coletas foram realizadas com auxílio de um amostrador de grande volume na Avenida Brasil, no campus da Universidade do Estado do Rio de Janeiro e no Túnel Rebouças em filtros de fibra de vidro. Metade de cada filtro foi submetido à extração por sonicação com o solvente diclorometano. Seis HPA foram identificados e quantificados por cromatografia gasosa com espectrometria de massa (GC/MS). Após a análise química as concentrações dos HPA obtidos foram correlacionados ao fatores físicos, além de ser realizado avaliação de risco para cada HPA estudado. Linhagens de Salmonella typhimurium (TA98 e derivadas TA98/1.8-DNP6, YG1021 e YG1024) foram utilizadas no ensaio de mutagenicidade e tratadas (10-50 g/placa) com extrato orgânico na presença e na ausência de metabolização exógena. Células de raiz de cebola foram tratadas com extratos orgânicos nas concentrações (5-25g/mL). A alta umidade encontrada no Túnel Rebouças pode ter influenciado na deposição de cinco dos seis HPA estudados em material particulado. Além disso, em diferentes condições de tráfego, motoristas de ônibus que cruzam a Avenida Brasil e o Rebouças túnel estão expostos ao risco induzidos por HPA na ordem de 10-6. Mutagenicidade foi detectada tanto na presença quanto na ausência de metabolização, para as linhagens YG1021 e YG1024 nos três pontos, sugerindo a presença de nitro e amino derivados de HPA. As amostras do Túnel Rebouças apresentaram os maiores valores para rev/g e rev/m3. Estes resultados podem estar relacionados ao longo trajeto e a restrita ventilação. Efeito citotóxico foi detectado pelo ensaio Allium cepa nos três pontos de monitoramento. Além disso os extratos orgânicos provenientes das coletas da Avenida Brasil, UERJ e do Túnel Rebouças induziram efeito clastogênico em células de raiz de Allium cepa

Blue green emission from a Cu+-Doped transparent material prepared by sintering porous glass

A colorless transparent, blue green emission material was fabricated by sintering porous glass impregnated with copper ions. The emission spectral profile obtained from Cu+ -doped high silica glass (HSG) by 267-mn monochromatic light excitation matches that obtained by pumping with an 800-nm femtosecond laser, indicating that the emissions in both cases come from an identical origin. The upconversion emission excited by 800-nm femtosecond laser is considered to be a three-photon excitation process. A tentative scheme of upconverted emission from Cu+ -doped HSG was also proposed. The glass materials presented herein are expected to find application in lamps, high density optical storage, and three-dimensional color displays.

Distribuição do material particulado em suspensão na plataforma continental e talude superior entre Ubatuba (SP) e o cabo Búzios (RJ)

A pesquisa aqui apresentada amostrou a plataforma continental e talude superior entre Ubatuba (SP) e o cabo Búzios (RJ), em dois projetos de escala local e de meso-escala. A campanha entre Ubatuba e o cabo Frio foi realizada no âmbito do projeto Oceano-Rio: levantamentos oceanográficos integrados ao largo do Estado do Rio de Janeiro, realizado em colaboração com o Ministério de Ciência e Tecnologia (MCT) e com a cooperação da Marinha do Brasil (MB), a bordo do Navio Hidro-oceanográfico Cruzeiro do Sul. Dos dados coletados nesta campanha oceanográfica, foram analisados os dados de CTD, concentração de oxigênio dissolvido, fluorescência, transmissividade, atenuação, retro-espalhamento além de amostras de água para a determinação direta da concentração de material particulado em suspensão (MPS). No experimento de menor escala, entre o cabo Frio e o cabo Búzios, além destes dados, foi realizado um fundeio entre 02 e 30 de julho de 2011, que amostrou a intensidade do eco, as correntes e as ondas. As análises realizadas permitiram observar uma grande abrangência da massa dágua característica da Ressurgência sobre a plataforma continental entre Ubatuba (SP) e cabo Búzios (RJ), inclusive em regiões muito rasas. A ressurgência nem sempre ocorreu associada aos ventos NE, sugerindo que a ocorrência de vórtices tem grande influência sobre o Sistema de Ressurgência de Cabo Frio. O padrão de distribuição de MPS na região é muito influenciado pela ressuspensão dos sedimentos de fundo (aumentada durante as tempestades, quando a coluna dágua passa a apresentar maiores concentrações de MPS), produção fitoplanctônica e aporte das baías costeiras. Outros processos que parecem influenciar este padrão são os vórtices e as ondas internas no talude. A complexidade da interação destas diferentes fontes de MPS e processos associados à sua distribuição ficou evidenciada no processo de conversão dos sinais óticos do transmissômetro e nefelômetro em concentração de MPS. Apesar desta dificuldade associada à grande variabilidade das características do MPS, as análises dos testes de conversão do sinal ótico em concentração de MPS permitem concluir que as melhores conversões podem ser obtidas após a inspeção visual das concentrações de MPS medidos (filtração) e remoção das amostras que não seguem a tendência geral esperada de dispersão sinal ótico versus concentração de MPS.

Diode-pumped passively q-switched Nd : YAG ceramic laser with a Cr4+: YAG crystal-satiable absorber

Transparent polycrystalline Nd:YAG ceramics were fabricated by solid-state reactive sintering a mixture of commercial Al2O3,Y2O3, and Nd2O3 powders. The powders were mixed in ethanol and doped with 0.5 wt% tetraethoxysilane, dried, and pressed. Pressed samples were sintered at 1750 degrees C in vacuum. Transparent fully dense samples with average grain sizes of 10 mu m were obtained. The 1 at.% Nd:YAG ceramic was used to research passively Q-switched laser output with a Cr4+:YAG crystal as a saturable absorber. An average output power of 94 mW with a pulse width of 50 ns was obtained when the incident pump power was 750 mW. The slope efficiency was 13%. The pulse energy is 5 mu J, and the peak power is about 100 W.

Diode-pumped Yb : YAG ceramic laser

Transparent polycrystalline Yb:YAG ceramics were fabricated by solid-state reactive sintering a mixture of commercial Al2O3, Y2O3, and Yb2O3 powders. The powders were mixed in ethanol and doped with 0.5 wt% tetraethoxysilane, dried, and pressed. Pressed samples were sintered at 1730 degrees C in vacuum. Transparent fully dense samples with grain sizes of several micrometers were obtained. The phase from 1500 degrees to 1700 degrees C was important for the grain growth, in which the grains grew quickly and a mass of pores were eliminated from the body of the sample. Annealing was an important step to remove the vacancies of oxygen and transform Yb2+ to Yb3+. The 1 at.% Yb:YAG ceramic sample was pumped by a diode laser to study the laser properties. The maximum output power of 1.02 W was obtained with a slope efficiency of 25% at 1030 nm. The size of the lasering sample was 4 mm x 4 mm x 3 mm.

Synthesis of CaCu3Ti4O12 ceramic via a sol-gel method

The novel nano-ultrafine powders for the preparation of CaCu3Ti4O12 ceramic were prepared by the sol-gel method and citrate auto-ignition method. The obtained precursor powders were pressed, sintered at 1000 degrees C to fabricate microcrystal CaCu3Ti4O12 ceramic. The microcrystalline phase of CaCu3Ti4O12 was confirmed by X-ray powder diffraction (XRD). The morphology and size of the grains of the powders and ceramics under different heat treatments were observed using scanning electron microscopy (SEM). The relative dielectric constant of the ceramic sintered at 1000 degrees C was measured with a magnitude of more than 10(4) at room temperature, which was approaching to those of Pb-containing complex perovskite ceramics, and the loss tangent was less than 0.20 in a broad frequency region. The relative dielectric constant and loss tangent were also compared with that of CaCu3Ti4O12 ceramic prepared by other reported methods. (c) 2006 Elsevier B.V. All rights reserved.