Lactobacillus strains isolated from infant faeces possess potent inhibitory activity against intestinal alpha- and beta-glucosidases suggesting anti-diabetic potential

Purpose: Inhibitors of intestinal alpha-glucosidases are used therapeutically to treat type 2 diabetes mellitus. Bacteria such as Actinoplanes sp. naturally produce potent alpha-glucosidase inhibitor compounds, including the most widely available drug acarbose. It is not known whether lactic acid bacteria (LAB) colonising the human gut possess inhibitory potential against glucosidases. Hence, the study was undertaken to screen LABs having inherent alpha- and beta-glucosidase inhibitory potential. Methods: This study isolated, screened, identified and extracted Lactobacillus strains (Lb1–15) from human infant faecal samples determining their inhibitory activity against intestinal maltase, sucrase, lactase and amylase. Lactobacillus reference strains (Ref1–7), a Gram positive control (Ctrl1) and two Gram negative controls (Ctrl2–3), were also analysed to compare activity. Results: Faecal isolates were identified by DNA sequencing, with the majority identified as unique strains of Lactobacillus plantarum. Some strains (L. plantarum, L. fermentum, L. casei and L. rhamnosus) had potent and broad spectrum inhibitory activities (up to 89 %; p < 0.001; 500 mg/ml wet weight) comparable to acarbose (up to 88 %; p < 0.001; 30 mg/ml). Inhibitory activity was concentration-dependent and was freely available in the supernatant, and was not present in other bacterial genera (Bifidobacterium bifidum and Escherichia coli or Salmonella typhimurium). Interestingly, the potency and spectrum of inhibitory activity across strains of a single species (L. plantarum) differed substantially. Some Lactobacillus extracts had broader spectrum activities than acarbose, effectively inhibiting beta-glucosidase activity (lactase) as well as alpha-glucosidase activities (maltase, sucrase and amylase). Anti-diabetic potential was indicated by the fact that oral gavage with a L. rhamnosus extract (1 g/kg) was able to reduce glucose excursions (Area under curve; 22 %; p < 0.05) in rats during a carbohydrate challenge (starch; 2 g/kg). Conclusion: These results definitively demonstrate that Lactobacillus strains present in the human gut have alpha- and beta-glucosidase inhibitory activities and can reduce blood glucose responses in vivo. Although the potential use of LAB such as Lactobacillus as a dietary supplement, medicinal food or biotherapeutic for diabetes is uncertain, such an approach might offer advantages over drug therapies in terms of broader spectrum activities and fewer unpleasant side effects. Further characterisation of this bioactivity is warranted, and chronic studies should be undertaken in appropriate animal models or diabetic subjects.

Effect of carbohydrate type and concentration on polyhydroxy alcohol and trehalose content of conidia of three entomopathogenic fungi

The entomopathogenic fungi Beauveria bassiana, Metarhizium anisopliae and Paecilomyces farinosus were cultured on solid agar media containing different carbohydrate components (glycerol, glucose, trehalose or starch) at concentrations of ≤ 142.7 g added carbon 1-1 for 30 d at 25°C. The water activity (a(w)) of the media ranged from 0.925 to 0.998. Growth of M. anisopliae and P. farinosus was stimulated between 0.975 and 0.995 a(w) on glucose media and that of P. farinosus at 0. 975 a(w) on glycerol media. At < 0.970 a(w), growth of each fungal species was significantly reduced (P < 0.05). Polyhydroxy alcohols (polyols) and trehalose were extracted from conidia produced on different media and quantified using HPLC. Total polyol content of conidia produced on glucose media varied between 5.2 and 52.2 mg g-1 for B. bassiana, 77.3 and 90.3 mg g-1 for M. anisopliae, and 26.7 and 76.1 mg g-1 for P. farinosus. The amounts of specific polyols in conidia varied significantly from media of different glucose concentrations. Mannitol was the predominant polyol in conidia of all three species, with conidia of M. anisopliae, for example, containing as much as 75.2 mg mannitol g-1 when cultured on glucose media. The amount of the lower molecular mass polyols glycerol and erythritol was greater in conidia produced on glucose media with > 50.0 g added carbon 1-1 than that in conidia produced at lower glucose concentrations. Conidia contained between 10.8 and 20.8 mg glycerol plus erythritol g-1 on glucose media with 142.7 g added carbon 1-1, depending on species. Conversely, conidia of B. bassiana and P. farinosus contained maximum amounts of trehalose ( ≤ 23.5 mg g-1) when produced on glucose media with < 50.0 g added carbon l-1, and trehalose content was considerably less at higher glucose concentrations. There were accumulations of glycerol and erythritol in conidia of all three species when grown on glycerol media with > 25.0 g added carbon 1-1; conidia of B. bassiana contained up to 154.0 mg glycerol plus erythritol g-1. hen B. bassiana and P. farinosus were grown on trehalose media, conidia contained up to 222.1 mg trehalose g-1. By contrast, conidia of M. anisopliae contained < 17.0 mg trehalose g-1 under all conditions tested. The water availability of solutions of different polyols is discussed in relation to their potential to act in osmotic adjustment during germination. The ability to manipulate polyol and trehalose content of fungal propagules may be critical in enhancing the storage life and efficacy of biological control agents.

The 'human revolution' in lowland tropical Southeast Asia:the antiquity and behavior of anatomically modern humans at Niah Cave (Sarawak, Borneo)

Recent research in Europe, Africa, and Southeast Asia suggests that we can no longer assume a direct and exclusive link between anatomically modern humans and behavioral modernity (the 'human revolution'), and assume that the presence of either one implies the presence of the other: discussions of the emergence of cultural complexity have to proceed with greater scrutiny of the evidence on a site-by-site basis to establish secure associations between the archaeology present there and the hominins who created it. This paper presents one such case study: Niah Cave in Sarawak on the island of Borneo, famous for the discovery in 1958 in the West Mouth of the Great Cave of a modern human skull, the 'Deep Skull,' controversially associated with radiocarbon dates of ca. 40,000 years before the present. A new chronostratigraphy has been developed through a re-investigation of the lithostratigraphy left by the earlier excavations, AMS-dating using three different comparative pre-treatments including ABOX of charcoal, and U-series using the Diffusion-Absorption model applied to fragments of bones from the Deep Skull itself. Stratigraphic reasons for earlier uncertainties about the antiquity of the skull are examined, and it is shown not to be an `intrusive' artifact. It was probably excavated from fluvial-pond-desiccation deposits that accumulated episodically in a shallow basin immediately behind the cave entrance lip, in a climate that ranged from times of comparative aridity with complete desiccation, to episodes of greater surface wetness, changes attributed to regional climatic fluctuations. Vegetation outside the cave varied significantly over time, including wet lowland forest, montane forest, savannah, and grassland. The new dates and the lithostratigraphy relate the Deep Skull to evidence of episodes of human activity that range in date from ca. 46,000 to ca. 34,000 years ago. Initial investigations of sediment scorching, pollen, palynomorphs, phytoliths, plant macrofossils, and starch grains recovered from existing exposures, and of vertebrates from the current and the earlier excavations, suggest that human foraging during these times was marked by habitat-tailored hunting technologies, the collection and processing of toxic plants for consumption, and, perhaps, the use of fire at some forest-edges. The Niah evidence demonstrates the sophisticated nature of the subsistence behavior developed by modern humans to exploit the tropical environments that they encountered in Southeast Asia, including rainforest. (c) 2006 Elsevier Ltd. All rights reserved.

Aspects of dietary carbohydrate intake are not related to risk of colorectal polyps in the Tennessee Colorectal Polyp Study

Purpose: High digestible carbohydrate intakes can induce hyperglycemia and hyperinsulinemia and collectively have been implicated in colorectal tumor development. Our aim was to explore the association between aspects of dietary carbohydrate intake and risk of colorectal adenomas and hyperplastic polyps in a large case–control study.

Methods: Colorectal polyp cases (n = 1,315 adenomas only, n = 566 hyperplastic polyps only and n = 394 both) and controls (n = 3,184) undergoing colonoscopy were recruited between 2003 and 2010 in Nashville, Tennessee, USA. Dietary intakes were estimated by a 108-item food frequency questionnaire. Unconditional logistic regression analysis was applied to determine odds ratios (OR) and corresponding 95 % confidence intervals (CI) for colorectal polyps according to dietary carbohydrate intakes, after adjustment for potential confounders.

Results: No significant associations were detected for risk of colorectal adenomas when comparing the highest versus lowest quartiles of intake for total sugars (OR 1.03; 95 % CI 0.84–1.26), starch (OR 1.01; 95 % CI 0.81–1.26), total or available carbohydrate intakes. Similar null associations were observed between dietary carbohydrate intakes and risk of hyperplastic polyps, or concurrent adenomas and hyperplastic polyps.

Conclusion: In this US population, digestible carbohydrate intakes were not associated with risk of colorectal polyps, suggesting that dietary carbohydrate does not have an etiological role in the early stages of colorectal carcinogenesis.

The determination of optimal processing conditions for PLA and PLA/CaCO3 in twin screw extrusion using DoE and multivariate analysis

Biodegradable polymers, such as PLA (Polylactide), come from renewable resources like corn starch and if disposed of correctly, degrade and become harmless to the ecosystem making them attractive alternatives to petroleum based polymers. PLA in particular is used in a variety of applications including medical devices, food packaging and waste disposal packaging. However, the industry faces challenges in melt processing of PLA due to its poor thermal stability which is influenced by processing temperatures and shearing.
Identification and control of suitable processing conditions is extremely challenging, usually relying on trial and error, and often sensitive to batch to batch variations. Off-line assessment in a lab environment can result in high scrap rates, long lead times and lengthy and expensive process development. Scrap rates are typically in the region of 25-30% for medical grade PLA costing between €2000-€5000/kg.
Additives are used to enhance material properties such as mechanical properties and may also have a therapeutic role in the case of bioresorbable medical devices, for example the release of calcium from orthopaedic implants such as fixation screws promotes healing. Additives can also reduce the costs involved as less of the polymer resin is required.
This study investigates the scope for monitoring, modelling and optimising processing conditions for twin screw extrusion of PLA and PLA w/calcium carbonate to achieve desired material properties. A DAQ system has been constructed to gather data from a bespoke measurement die comprising melt temperature; pressure drop along the length of the die; and UV-Vis spectral data which is shown to correlate to filler dispersion. Trials were carried out under a range of processing conditions using a Design of Experiments approach and samples were tested for mechanical properties, degradation rate and the release rate of calcium. Relationships between recorded process data and material characterisation results are explored.

Contribuição para a melhoria da qualidade nutricional do sorgo

Este trabalho teve como principal objectivo sugerir uma forma de processamento de sorgo adaptável à escala industrial que, sendo culturalmente aceite e sensível aos hábitos alimentares, aos factores sociais e às limitações económicas e tecnológicas das populações Africanas de consumo, pudesse dar origem a um produto alimentar seguro e enriquecido em termos nutricionais. Numa primeira fase, efectuou-se um estudo comparativo entre os efeitos promovidos por diferentes formas de processamento: cozimento em água, aquecimento em banho-maria, pipocagem, germinação, fermentação e altapressão. Foram ainda determinadas as condições óptimas de aplicação do processo germinativo e da tecnologia de alta-pressão. Verificou-se que a fermentação, a germinação e a alta-pressão permitem uma melhoria significativa da digestibilidade proteica da farinha de sorgo. A pipocagem conduziu a uma redução da extractibilidade das proteínas não promovendo, contudo, alterações na sua digestibilidade. Comparativamente ao cozimento em água, que promove uma diminuição acentuada na digestibilidade proteica, o cozimento em banho-maria promove uma diminuição ténue e significativamente inferior. Deste estudo comparativo, foi possível concluir que a extractibilidade das proteínas não está correlacionada com a sua digestibilidade e que a água exerce um papel fundamental na diminuição da digestibilidade proteica com o aquecimento. Numa segunda fase, pretendeu-se desenvolver um processo fermentativo que conduzisse a um produto de sorgo com características nutricionais incrementadas. Para tal, foram testadas daiferentes espécies de bactérias lácticas isoladas e conjugadas entre si. Foi ainda testada a adição de malte de sorgo previamente à fermentação e a adição de leveduras ao inóculo. Com este estudo, foi possível concluir que a fermentação do sorgo com um inóculo constituído por culturas puras de Lactobacillus brevis, Lactobacillus fermentum e Streptococcus thermophilus permite a obtenção de uma preparação alimentar com características nutricionais melhoradas no que respeita ao balanço em aminoácidos essenciais, à digestibilidade da proteína e do amido e à viscosidade do produto final.

Efeito da pressão e temperatura em suspensões de amido

O objetivo do presente trabalho consistiu no estudo das propriedades viscoelásticas de suspensões de amido nativo e processado a alta pressão. Foi utilizado um sensor acústico de forma a analisar as propriedades das suspensões, sendo depois recolhidas informações complementares através de outras técnicas: calorimetria diferencial de varrimento, microscopia de luz polarizada e microscopia eletrónica de varrimento. Neste trabalho foram realizados estudos com amido de milho nativo e processado a alta pressão (500 MPa, 5 minutos, temperatura ambiente), tendo-se verificado que a suspensão do amido processado apresentava propriedades viscoelásticas muito diferentes do amido nativo. A temperatura a que se iniciou o aumento da viscosidade foi mais elevada para o amido processado a alta pressão, e as variações observadas para temperaturas superiores a 70 °C foram menores. Durante o arrefecimento foi detetada uma diminuição da viscosidade, correspondente a um aumento da organização molecular, com maior expressão no amido nativo mas que se dá no mesmo intervalo de temperatura, quer para este quer o processado a alta pressão. Foi também possível concluir que a velocidade de aquecimento da amostra de amido influencia as propriedades viscoelásticas da suspensão e as temperaturas a que ocorrem as variações de viscosidade relacionadas com o processo de gelatinização do amido. De assinalar também que no amido de milho se pode detetar pela variação da frequência do cristal piezoelétrico o rompimento dos grânulos e que apesar do estabelecimento de novas ligações e da reposição de alguma ordem molecular que se pode verificar durante o arrefecimento, a frequência da suspensão depois de arrefecida era muito diferente da suspensão de amido inicial. No amido de arroz, a temperatura a que se inicia o aumento de viscosidade foi superior à que se observou para o amido de milho, indicio da maior resistência do amido de arroz, para o qual não se detetou sinal de rutura dos grânulos. A frequência final da suspensão do mesmo, depois de arrefecido, era igual à inicial. Com o amido de arroz foi feito o estudo da influência da temperatura no processamento de alta pressão, tendo sido processadas suspensões a 400 MPa, durante 15 minutos, a 5, 10, 23 e 34 °C. As propriedades viscoelásticas foram analisadas com recurso a um sensor acústico, tendo-se verificado que quanto maior a temperatura de processamento a alta pressão, mais elevada a temperatura necessária para que se inicie o aumento de viscosidade e menores as temperaturas a que se inicia diminuição da mesma durante o arrefecimento.

Physiology and metabolic profile of Moringa olifera and Eucalyptus globulus plants subjected to climate changes

As alterações climáticas emergentes têm um grande impacto no crescimento e desenvolvimento de espécies florestais, nomeadamente em espécies de valor industrial e medicinal, como é o caso do eucalipto (Eucalyptus globulus) e da moringa (Moringa oleifera). Assim, é urgente conhecer as respostas fisiológicas e entender as variações que ocorrem nos perfis metabólicos de espécies vegetais. Neste trabalho, plantas jovens de Eucalyptus globulus foram expostas a radiação UVB (12kJ/m2) e foram avaliadas as respostas fisiológicas e o perfil metabólico, um e onze dias após a aplicação da radiação. A dose de UVB usada não afetou as reações fotoquímicas nem as trocas gasosas, contudo ao nível do metabolismo do carbono (AST e amido) e do conteúdo de pigmentos verificaram-se pequenas alterações (AST e pigmentos). Através da análise do perfil metabólico de E. globulus foram encontrados compostos voláteis e semi-voláteis pertencentes às famílias dos terpenos, sesquiterpenos e aldeídos. Em geral, os sesquiterpenos e os álcoois monoterpénicos apresentaram uma tendência para manter e, em alguns casos, diminuir com o stress, enquanto que o grupos dos aldeídos aumentou e os monoterpenos apresentaram um comportamento mais heterogéneo. O E. globulus mostrou ser uma espécie tolerante à aplicação da dose de UVB usada neste trabalho. Por outro lado, plantas jovens de M. oleifera foram expostas a défice hídrico (DH). Um grupo de plantas foi recolhido um dia após o final da exposição e o outro grupo após onze dias do final da exposição. Foi avaliado o perfil metabólico desta espécie através de GC/MS. Os dados cromatográficos indicaram que em condições de stress (DH(1) e DH(11)), as quantidades de compostos associados a vias primárias e secundárias de defesa (como os alcanos, álcoois, ácidos carboxílicos, esteróis, aminoácidos e açucares) sofreram algumas alterações. As plantas analisadas 11 dias após a remoção do stress mostraram maiores variações do perfil de metabolitos. No entanto, tanto um como onze dias após a remoção do stress, as plantas apresentaram a formação de novos rebentos. Apesar do perfil de metabolitos ter sofrido algumas alterações, por não se registarem casos de morte, conclui-se que as plantas de moringa mostraram ser tolerantes aos tratamentos aplicados.

Early nutritional programming in fish: tailoring the metabolic use of dietary carbohydrates

Tese de doutoramento, Ciências da Vida, do Mar, da Terra e do Ambiente (Nutrição), Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Development and characterization of novel vehicles for topical drug delivery

Tese de doutoramento, Farmácia (Tecnologia Farmacêutica), Universidade de Lisboa, Faculdade de Farmácia, 2016

Modelling of a wastewater treatment plant using GPS-X

Dissertation to obtain the degree of Master in Chemical and Biochemical Engineering

Engineering bio-based polymers using alternative solvents and processes

The work presented in this thesis explores novel routes for the processing of bio-based polymers, developing a sustainable approach based on the use of alternative solvents such as supercritical carbon dioxide (scCO2), ionic liquids (ILs) and deep eutectic solvents (DES). The feasibility to produce polymeric foams via supercritical fluid (SCF) foaming, combined with these solvents was assessed, in order to replace conventional foaming techniques that use toxic and harmful solvents. A polymer processing methodology is presented, based on SCF foaming and using scCO2 as a foaming agent. The SCF foaming of different starch based polymeric blends was performed, namely starch/poly(lactic acid) (SPLA) and starch/poly(ε-caprolactone) (SPCL). The foaming process is based on the fact that CO2 molecules can dissolve in the polymer, changing their mechanical properties and after suitable depressurization, are able to create a foamed (porous) material. In these polymer blends, CO2 presents limited solubility and in order to enhance the foaming effect, two different imidazolium based ILs (IBILs) were combined with this process, by doping the blends with IL. The use of ILs proved useful and improved the foaming effect in these starch-based polymer blends. Infrared spectroscopy (FTIR-ATR) proved the existence of interactions between the polymer blend SPLA and ILs, which in turn diminish the forces that hold the polymeric structure. This is directly related with the ability of ILs to dissolve more CO2. This is also clear from the sorption experiments results, where the obtained apparent sorption coefficients in presence of IL are higher compared to the ones of the blend SPLA without IL. The doping of SPCL with ILs was also performed. The foaming of the blend was achieved and resulted in porous materials with conductivity values close to the ones of pure ILs. This can open doors to applications as self-supported conductive materials. A different type of solvents were also used in the previously presented processing method. If different applications of the bio-based polymers are envisaged, replacing ILs must be considered, especially due to the poor sustainability of some ILs and the fact that there is not a well-established toxicity profile. In this work natural DES – NADES – were the solvents of choice. They present some advantages relatively to ILs since they are easy to produce, cheaper, biodegradable and often biocompatible, mainly due to the fact that they are composed of primary metabolites such as sugars, carboxylic acids and amino-acids. NADES were prepared and their physicochemical properties were assessed, namely the thermal behavior, conductivity, density, viscosity and polarity. With this study, it became clear that these properties can vary with the composition of NADES, as well as with their initial water content. The use of NADES in the SCF foaming of SPCL, acting as foaming agent, was also performed and proved successful. The SPCL structure obtained after SCF foaming presented enhanced characteristics (such as porosity) when compared with the ones obtained using ILs as foaming enhancers. DES constituted by therapeutic compounds (THEDES) were also prepared. The combination of choline chloride-mandelic acid, and menthol-ibuprofen, resulted in THEDES with thermal behavior very distinct from the one of their components. The foaming of SPCL with THEDES was successful, and the impregnation of THEDES in SPCL matrices via SCF foaming was successful, and a controlled release system was obtained in the case of menthol-ibuprofen THEDES.

A preliminary study of the MDH variability in Lemna minor - Lemna turionifera /

Lemna minor is a small aquatic polyploid angiosperm which reproduces apomictically and has a worldwide distribution. This study was vmdertaken to characterize the extent and nature of phenotypic variability. The techniques of starch gel electrophoresis were used in this investigation and. MDH phenotypes of several populations from Ontario, USA and Africa were examined and compared. Heat stability, molecular weight and cell fractionation analyses were also done to identify locus specific MDH bands. The results of the population surveys suggest that there is little genetic variability present both within and between Lemna minor/Lemna turionifera . Evidence of correlation of physiological and seasonal variation patterns was found.

Frequency-dependent selection at the amylase locus in Drosophila melanogaster

A. strain of Drosophila melanog-aster deficient in null amylase activity (Amylase ) was isolated from a wild null population of flies. The survivorship of Amylase homozygous flies is very low when the principal dietary carbohydrate source is starch. However, the survivorship of the null Amylase genotype is comparable to the wild type when the dietary starch is replaced by glucose. In addition, the null viability of the amylase-producing and Amylase strains is comparable v and very lm<] f on a medium with no carbohydrates . Furthermore, amylase-producing genotypes were shovm to excrete enzymatically active amylase protein into the food medium. The excreted amylase causes the external breakdown of dietary starch to sugar. These results led to the following null prediction: the viability of the A.mvlase genotype (fed on a starch rich diet) might increase in the presence of individuals which were amylase-producing. It was shown experimentally that such an increase in viability did in fact occur and that this increase v\Tas proportional to the number of mnylase..::producing fli.es present. These results provide a unique example of a non-"competi ti ve inter-genotype interaction, and one where the underlying physio~ logical and biochemical mechanism has been fully understood.

Sélection des substrats lors de l’exercice prolongé avec ingestion de glucides : études par traçage au 13C

Les principaux substrats oxydés à l’exercice, soit les glucides, les lipides et les pro- téines ne contribuent pas tous au même niveau à la fourniture d’énergie lors de l’effort prolongé. De plus, le glucose peut provenir de différentes sources endogènes (muscle, foie) et exogènes. Plusieurs facteurs peuvent influencer leur contribution respective incluant : la masse musculaire impliquée et l’entraînement préalable, le sexe, l’état nutritionnel et les conditions environnementales. L’utilisation d’isotopes stables, tels que le carbone 13 (13C), combinée à la calorimétrie indirecte respiratoire corrigée pour l’excrétion d’urée dans l’urine et la sueur, permet de différencier les substrats endogènes et exogènes et d’évaluer la contribution de leur oxydation à la fourniture d’énergie. Ces méthodes d’investigation permettant d’apprécier la sélection des substrats lors de l’exercice prolongé avec ingestion de glucose ont permis d’effectuer les comparaisons qui ont fait l’objet des trois études de cette thèse. Dans la première étude, la sélection des substrats au cours d’un effort prolongé effectué avec les membres inférieurs ou les membres supérieurs a été comparée avec et sans ingestion de glucose. Une différence modeste fut observée entre la sélection des substrats selon le mode d’exercice avec l’ingestion d’eau, celle-ci favorisant légèrement l’oxydation des glucides lors de l’effort avec les membres supérieurs. La quantité de glucose exogène oxydée était plus faible lors de l’exercice avec les membres supérieurs qu’avec les membres supérieurs, mais sa contribution plus importante, conséquence d’une dépense énergétique plus faible. Dans la deuxième étude, on a comparé la sélection des substrats chez des sujets mas- culins et féminins et les effets d’une alimentation enrichie en glucides ou de l’ingestion de glucose, au cours d’un exercice prolongé d’une durée de deux heures. On reconnaît généralement que, pour une même puissance relative, les femmes utilisent moins de glucides et davantage de lipides que les hommes. Les effets séparés d’une alimentation riche en glucides ou de l’ingestion de glucose pendant l’exercice sur la sélection des substrats furent pourtant similaires chez les deux sexes. L’effet combiné des deux procédures de supplémentation est toutefois plus important chez la femme que chez l’homme, soutenant l’hypothèse qu’un léger déficit en glucides soit présent chez les femmes. Dans la troisième étude, l’oxydation des substrats et particulièrement celle d’amidon exogène au cours d’une marche prolongée à une faible puissance de travail a été décrite. Les individus qui pratiquent des activités physiques prolongées à des intensités faibles (< 40 %VO2max) sont encouragés à ingérer des glucides et de l’eau pendant l’effort, mais la contribution de leur oxydation à la fourniture d’énergie est relativement peu connue. Nous avons montré que, contrairement aux observations précédemment effectuées à jeun sans ingestion de glucides pendant l’effort, les glucides (incluant de source exogène) peuvent fournir une très grande partie de l’énergie lorsqu’ils sont ingérés à des intervalles réguliers au cours de l’exercice prolongé. Dans l’ensemble, les résultats des études expérimentales présentées dans cette thèse montrent que les glucides ingérés peuvent fournir une grande proportion de l’énergie pendant l’exercice prolongé. Toutefois, le mode d’exercice, le sexe et la puissance de travail mènent à des variations qui sont en grande partie liées à une dépense énergétique variable selon les conditions et les groupes d’individus ayant des caractéristiques différentes.