Experimental studies of hollow flange channel beams subject to combined bending and shear actions

This paper presents the details of an experimental study of a cold-formed steel hollow flange channel beam known as LiteSteel Beam (LSB) subject to combined bending and shear actions. The LSB sections are produced by a patented manufacturing process involving simultaneous cold-forming and electric resistance welding. Due to the geometry of the LSB, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, much of the existing research for common cold-formed steel sections is not directly applicable to LSB. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions and predominant shear actions. To date, however, no investigation has been conducted into the strength of LSB sections under combined bending and shear actions. Combined bending and shear is especially prevalent at the supports of continuous span and cantilever beams, where the interaction of high shear force and bending moment can reduce the capacity of a section to well below that for the same section subject only to pure shear or moment. Hence experimental studies were conducted to assess the combined bending and shear behaviour and strengths of LSBs. Eighteen tests were conducted and the results were compared with current AS/NZS 4600 and AS 4100 design rules. AS/NZS 4600 design rules were shown to grossly underestimate the combined bending and shear capacities of LSBs and hence two lower bound design equations were proposed based on experimental results. Use of these equations will significantly improve the confidence and cost-effectiveness of designing LSBs for combined bending and shear actions.

Nonrigid face alignment for unknown subject in video

Non-rigid face alignment is a very important task in a large range of applications but the existing tracking based non-rigid face alignment methods are either inaccurate or requiring person-specific model. This dissertation has developed simultaneous alignment algorithms that overcome these constraints and provide alignment with high accuracy, efficiency, robustness to varying image condition, and requirement of only generic model.

Sex-specific compromised bone healing in female rats might be associated with a decrease in mesenchymal stem cell quantity

Introduction The clinically known importance of patient sex as a major risk factor for compromised bone healing is poorly reflected in animal models. Consequently, the underlying cellular mechanisms remain elusive. Because mesenchymal stem cells (MSCs) are postulated to regulate tissue regeneration and give rise to essential differentiated cell types, they may contribute to sex-specific differences in bone healing outcomes. Methods We investigated sex-specific variations in bone healing and associated differences in MSC populations. A 1.5 mm osteotomy gap in the femora of 8 male and 8 female 12-month-old Sprague-Dawley rats was stabilized by an external fixator. Healing was analyzed in terms of biomechanical testing, bridging and callus size over time (radiography at 2, 4, and 6 weeks after surgery), and callus volume and geometry by μCT at final follow-up. MSCs were obtained from bone marrow samples of an age-matched group of 12 animals (6 per gender) and analyzed for numbers of colony-forming units (CFUs) and their capacity to differentiate and proliferate. The proportion of senescent cells was determined by β-galactosidase staining. Results Sex-specific differences were indicated by a compromised mechanical competence of the callus in females compared with males (maximum torque at failure, p = 0.028). Throughout the follow-up, the cross-sectional area of callus relative to bone was reduced in females (p ≤ 0.01), and the bridging of callus was delayed (p 2weeks = 0.041). μCT revealed a reduced callus size (p = 0.003), mineralization (p = 0.003) and polar moment of inertia (p = 0.003) in female animals. The female bone marrow contained significantly fewer MSCs, represented by low CFU numbers in both femora and tibiae (p femur = 0.017, p tibia = 0.010). Functional characteristics of male and female MSCs were similar. Conclusion Biomechanically compromised and radiographically delayed bone formation were distinctive in female rats. These differences were concomitant with a reduced number of MSCs, which may be causative for the suboptimal bone healing.

Second harmonic generation and multiphoton microscopic detection of collagen without the need for species specific antibodies

High-resolution, high-contrast, three-dimensional images of live cell and tissue architecture can be obtained using second harmonic generation (SHG), which comprises non-absorptive frequency changes in an excitation laser line. SHG does not require any exogenous antibody or fluorophore labeling, and can generate images from unstained sections of several key endogenous biomolecules, in a wide variety of species and from different types of processed tissue. Here, we examined normal control human skin sections and human burn scar tissues using SHG on a multi-photon microscope (MPM). Examination and comparison of normal human skin and burn scar tissue demonstrated a clear arrangement of fibers in the dermis, similar to dermal collagen fiber signals. Fluorescence-staining confirmed the MPM-SHG collagen colocalization with antibody staining for dermal collagen type-I but not fibronectin or elastin. Furthermore, we were able to detect collagen MPM-SHG signal in human frozen sections as well as in unstained paraffin embedded tissue sections that were then compared with hematoxylin and eosin staining in the identical sections. This same approach was also successful in localizing collagen in porcine and ovine skin samples, and may be particularly important when species-specific antibodies may not be available. Collectively, our results demonstrate that MPM SHG-detection is a useful tool for high resolution examination of collagen architecture in both normal and wounded human, porcine and ovine dermal tissue.

The role of the arachidonic acid pathway in NSCLC development and progression : novel approaches for therapeutic intervention

Arachidonic acid metabolism through cyclooxygenase (COX), lipoxygenase (LOX) and cytochrome P-450 epoxygenase (EPOX) pathways is responsible for the formation of biologically active eicosanoids, including prostanoids, leukotrienes, hydroxyeicosatetraenoic acid, epoxyeicosatrienoic acid and hydroperoxyeicosatetraenoic acids. Altered eicosanoid expression levels are commonly observed during tumour development and progression of a range of malignancies, including non-small cell lung cancer (NSCLC). Arachidonic acid-derived eicosanoids affect a range of biological phenomena to modulate tumour processes such as cell growth, survival, angiogenesis, cell adhesion, invasion and migration and metastatic potential. Numerous studies have demonstrated that eicosanoids modulate NSCLC development and progression, while targeting these pathways has generally been shown to inhibit tumour growth/progression. Modulation of these arachidonic acid-derived pathways for the prevention and/or treatment of NSCLC has been the subject of significant interest over the past number of years, with a number of clinical trials examining the potential of COX and LOX inhibitors in combination with traditional and novel molecular approaches. However, results from these trials have been largely disappointing. Furthermore, enthusiasm for the use of selective COX-2 inhibitors for cancer prevention/treatment waned, due to their association with adverse cardiovascular events in chemoprevention trials. While COX and LOX targeting may both retain promise for NSCLC prevention and/or treatment, there is an urgent need to understand the downstream signalling mechanisms through which these and other arachidonic acid-derived signalling pathways mediate their effects on tumourigenesis. This will allow for development of safer and potentially more effective strategies for NSCLC prevention and/or treatment. Chemoprevention studies with PGI2 analogues have demonstrated considerable promise, while binding to/signalling through PGE2 receptors have also been the subject of interest for NSCLC treatment. In this chapter, the role of the eicosanoid signalling pathways in non-small cell lung cancer will be discussed. In particular, the effect of the eicosanoids on tumour cell proliferation, their roles in induction of cell death, effects on angiogenesis, migration, invasion and their regulation of the immune response will be assessed, with signal transduction pathways involved in these processes also discussed. Finally, novel approaches targeting these arachidonic acid-derived eicosanoids (using pharmacological or natural agents) for chemoprevention and/or treatment of NSCLC will be outlined. Elucidating the molecular mechanisms underlying the effects of specific or general arachidonic acid pathway modulators may lead to the design of biologically and pharmacologically targeted therapeutic strategies for NSCLC prevention/treatment, which may be used alone or in combination with conventional therapies.

The subject and architecture

Invited Presentation on my book Architecture for a Free Subjectivity. In March of 1982, Skyline, the Institute for Architecture and Urban Studies serial, published the landmark interview between Paul Rabinow, an American anthropologist, and Michel Foucault, which would only appear two years later under the title “Space, Knowledge, and Power,” in Rabinow’s edited book The Foucault Reader. Foucault said that in the spatialization of knowledge and power beginning in the 18th century, architecture is not a signifier or metaphor for power, it is rather the “technique for practising social organization.” The role of the IAUS in the architectural dissemination of Foucault’s ideas on the subject and space in the North American academy – such as the concept “heterotopia,” and Foucault’s writing on surveillance and Jeremy Bentham’s Panopticon, subsequently analysed by Georges Teyssot, who was teaching at the Venice School – is well known. Teyssot’s work is part of the historical canalization of Foucauldianism, and French subjectivity more broadly, along its dizzying path, via Italy, to American architecture schools, where it solidified in the 1980s paradigm that would come to be known as American architecture theory. Foucault was already writing on incarceration and prisons, from the 1970s. (In the 1975 lectures he said “architecture was responsible for the invention of madness.”) But this work was not properly incorporated into architectural discussion until the early ’80s. What is not immediately apparent, what this history suggests to me is that subjectivity was not a marginal topic within “theory”, but was perhaps a platform and entry point for architecture theory. One of the ideas that I’m working on is that “theory” can be viewed, historically, as the making of architectural subjectivity, something that can be traced back to the Frankfurt School critique which begins with the modern subject...

Comparison of high level FPGA hardware design for solving tri-diagonal linear systems

Reconfigurable computing devices can increase the performance of compute intensive algorithms by implementing application specific co-processor architectures. The power cost for this performance gain is often an order of magnitude less than that of modern CPUs and GPUs. Exploiting the potential of reconfigurable devices such as Field-Programmable Gate Arrays (FPGAs) is typically a complex and tedious hardware engineering task. Re- cently the major FPGA vendors (Altera, and Xilinx) have released their own high-level design tools, which have great potential for rapid development of FPGA based custom accelerators. In this paper, we will evaluate Altera’s OpenCL Software Development Kit, and Xilinx’s Vivado High Level Sythesis tool. These tools will be compared for their per- formance, logic utilisation, and ease of development for the test case of a Tri-diagonal linear system solver.

Immunization with a MOMP-based vaccine protects mice against a Pulmonary Chlamydia challenge and identifies a disconnection between infection and pathology

Chlamydia pneumoniae is responsible for up to 20% of community acquired pneumonia and can exacerbate chronic inflammatory diseases. As the majority of infections are either mild or asymptomatic, a vaccine is recognized to have the greatest potential to reduce infection and disease prevalence. Using the C. muridarum mouse model of infection, we immunized animals via the intranasal (IN), sublingual (SL) or transcutaneous (TC) routes, with recombinant chlamydial major outer membrane protein (MOMP) combined with adjuvants CTA1-DD or a combination of cholera toxin/CpG-oligodeoxynucleotide (CT/CpG). Vaccinated animals were challenged IN with C. muridarum and protection against infection and pathology was assessed. SL and TC immunization with MOMP and CT/CpG was the most protective, significantly reducing chlamydial burden in the lungs and preventing weight loss, which was similar to the protection induced by a previous live infection. Unlike a previous infection however, these vaccinations also provided almost complete protection against fibrotic scarring in the lungs. Protection against infection was associated with antigen-specific production of IFNγ, TNFα and IL-17 by splenocytes, however, protection against both infection and pathology required the induction of a similar pro-inflammatory response in the respiratory tract draining lymph nodes. Interestingly, we also identified two contrasting vaccinations capable of preventing infection or pathology individually. Animals IN immunized with MOMP and either adjuvant were protected from infection, but not the pathology. Conversely, animals TC immunized with MOMP and CTA1-DD were protected from pathology, even though the chlamydial burden in this group was equivalent to the unimmunized controls. This suggests that the development of pathology following an IN infection of vaccinated animals was independent of bacterial load and may have been driven instead by the adaptive immune response generated following immunization. This identifies a disconnection between the control of infection and the development of pathology, which may influence the design of future vaccines.

Context-specific stressors, work-related social support and work-family conflict : a mediation study

Understanding the antecedents of work-family conflict is important as it allows organisations to effectively engage in work design for professional employees. This study examines the impact of sources of social support as antecedents of work-family conflict. The hypotheses were tests using Partial Least Squares modelling on a sample of 366 professional employees. The path model showed that context-specific stressors impacted positively on job demand, which led to higher levels of work-family conflict. Contrary to our expectation, non-work related social support did not have any statistical relationship with job demand and work-family conflict. In addition, individuals experiencing high job demands were found to obtain more social support from both work and non-work-related sources. Individuals with more work-related social support were less likely to have less work-family conflict. Surprisingly, non-work social support sources had no statistically significant relationship with work-family conflict.

Species-specific homing mechanisms of human prostate cancer metastasis in tissue engineered bone

The development of effective therapeutic strategies against prostate cancer bone metastases has been impeded by the lack of adequate animal models that are able to recapitulate the biology of the disease in humans. Bioengineered approaches allow researchers to create sophisticated experimentally and physiologically relevant in vivo models to study interactions between cancer cells and their microenvironment under reproducible conditions. The aim of this study was to engineer a morphologically and functionally intact humanized organ bone which can serve as a homing site for human prostate cancer cells. Transplantation of biodegradable tubular composite scaffolds seeded with human mesenchymal progenitor cells and loaded with rhBMP-7 resulted in the development of a chimeric bone construct including a large number of human mesenchymal cells which were shown to be metabolically active and capable of producing extracellular matrix components. Micro-CT analysis demonstrated that the newly formed ossicle recapitulated the morphological features of a physiological organ bone with a trabecular network surrounded by a cortex-like outer structure. This microenvironment was supportive of the lodgement and maintenance of murine haematopoietic cell clusters, thus mimicking a functional organ bone. Bioluminescence imaging demonstrated that luciferase-transduced human PC3 cells reproducibly homed to the humanized tissue engineered bone constructs, proliferated, and developed macro-metastases. This model allows the analysis of interactions between human prostate cancer cells and a functional humanized bone organ within an immuno-incompetent murine host. The system can serve as a reproducible platform to study effects of therapeutics against prostate cancer bone metastases within a humanized microenvironment.

Dancing to too many tunes : contemporary course design in teacher education

Contemporary course designers in schools and faculties of Education are finding themselves dancing to many tunes, arguably too many tunes, in order to have their initial teacher education courses accredited by external agencies whilst satisfying internal approval processes and, critically, maintaining the philosophical integrity of their programs and their institutional watermarks. The “tunes” here are the agendas driven by and the demands made by distinct independent agencies. The external agencies influencing Education include: TEQSA (Tertiary Education Quality and Standards Agency) which will assure alignment to the AQF (Australian Qualifications Framework); professional bodies such as AITSL (Australian Institute for Teaching and School Leadership) which now accredits all pre-service teacher Education courses across Australia and assures alignment with the Australian Professional Standards for Teachers; and the state and territory regulatory authorities that have an impact within a specific jurisdiction, for example, the Queensland College of Teachers (QCT) and the Teacher Registration Board of Western Australia (TRBWA). This paper – whose findings have been arrived at through a year-long OLT National Teaching Fellowship - will outline the complex and competing agendas currently at play and focus on the disjuncture evident in the fundamental defining of who is a “graduate.” It will also attempt to identify where there are synergies between the complex demands being made. It will argue that there are too many “tunes” and the task of finding a balance between compliance and delivering effective initial teacher education may not be possible because of the cacophony of their conflicting demands.

Artful surfaces : an ethnographic study exploring the use of space in design studios

A largely overlooked aspect of creative design practices is how physical space in design studios plays a role in supporting designers' everyday work. In particular, studio surfaces such as designers' desks, office walls, notice boards, clipboards and drawing boards are full of informative, inspirational and creative artefacts such as, sketches, drawings, posters, story-boards and Post-it notes. Studio surfaces are not just the carriers of information but importantly they are sites of methodic design practices, i.e. they indicate, to an extent, how design is being carried out. This article describes the results of an ethnographic study on the use of workplace surfaces in design studios, from two academic design departments. Using the field study results, the article introduces an idea of ‘artful surfaces’. Artful surfaces emphasise how artfully designers integrate these surfaces into their everyday work and how the organisation of these surfaces comes about helping designers in accomplishing their creative and innovative design practices. Using examples from the field study, the article shows that artful surfaces have both functional and inspirational characteristics. From the field study, three types of artful surfaces are identified: personal; shared; and project-specific. The article suggests that a greater insight into how these artful surfaces are created and used could lead to better design of novel display technologies to support designers' everyday work.

Artful surfaces in design practices

A largely overlooked aspect of innovative design practices is how workplace surfaces play a role in supporting designers' everyday work. In this paper we introduce the idea of artful surfaces. Artful surfaces (Figure 1) are full of informative, inspirational and creative artefacts that help designers accomplish their everyday design practices. The way these surfaces are created and used could provide information about how designers work. We identify four types of artful surfaces: personal, shared, project-specific and live surfaces; and describe them using examples.

A threshold concepts focus to curriculum design: supporting student learning through application of variation theory

This project develops and evaluates a model of curriculum design that aims to assist student learning of foundational disciplinary ‘Threshold Concepts’. The project uses phenomenographic action research, cross-institutional peer collaboration and the Variation Theory of Learning to develop and trial the model. Two contrasting disciplines (Physics and Law) and four institutions (two research-intensive and two universities of technology) were involved in the project, to ensure broad applicability of the model across different disciplines and contexts. The Threshold Concepts that were selected for curriculum design attention were measurement uncertainty in Physics and legal reasoning in Law. Threshold Concepts are key disciplinary concepts that are inherently troublesome, transformative and integrative in nature. Once understood, such concepts transform students’ views of the discipline because they enable students to coherently integrate what were previously seen as unrelated aspects of the subject, providing new ways of thinking about it (Meyer & Land 2003, 2005, 2006; Land et al. 2008). However, the integrative and transformative nature of such threshold concepts make them inherently difficult for students to learn, with resulting misunderstandings of concepts being prevalent...

Quantitative fit analysis of orthopedic bone plates : methods, criteria and approach

Studies on quantitative fit analysis of precontoured fracture fixation plates emerged within the last few years and therefore, there is a wide research gap in this area. Quantitative fit assessment facilitates the measure of the gap between a fracture fixation plate and the underlying bone, and specifies the required plate fit criteria. For clinically meaningful fit assessment outcome, it is necessary to establish the appropriate criteria and parameter. The present paper studies this subject and recommends using multiple fit criteria and the maximum distance between the plate and underlying bone as fit parameter for clinically relevant outcome. We also propose the development of a software tool for automatic plate positioning and fit assessment for the purpose of implant design validation and optimization in an effort to provide better fitting implant that can assist proper fracture healing. The fundamental specifications of the software are discussed.