12-Month color stability of enamel, dentine, and enamel-dentine samples after bleaching

The study aimed to quantify the color regression of enamel (E), dentine (D), and combined enamel-dentine (ED) of differently bleached ED specimens over a period of 12 months in vitro. Two ED samples were obtained from the labial surfaces of bovine teeth and prepared to a standardized thickness with the enamel and dentine layer each 1 mm. The ED samples were distributed on four groups (each n=80), in which the different bleaching products were applied on enamel (1, Whitestrips; 2, Illumine 15%; 3, Opalescence Xtra Boost) or dentine surfaces (4, mixture of sodium perborate/distilled water). Eighty ED samples were not bleached (control). Color (L*a*b*) of ED was assessed at baseline, subsequently after bleaching and at 3, 6, and 12 months of storage after bleaching (each 20 samples/group). E and D samples were prepared by removing the dentine or enamel layer of ED samples to allow for separate color analysis. Bleaching resulted in a significant color change (Delta E) of ED specimens. Within the observation period, Delta L but not Delta b declined to baseline. L* values of E and D samples also declined and were not significantly different from control samples after 12 months, while b* values did not decrease to baseline. Generally, no differences between the bleaching agents could be observed. Color change of enamel, dentine, and combined ED of in vitro bleached tooth samples is not stable over time with regard to lightness. However, yellowness did not return to baseline within 1 year.

Evaluation of pH, available chlorine content, and antibacterial activity of endodontic irrigants and their combinations against Enterococcus faecalis

Objectives. The objectives of this study were to evaluate pH, available chlorine content, and antibacterial activity of endodontic irrigants and their combinations.Study design. The pH and chlorine content of sodium hypochlorite (NaOCl) were analyzed pure and in combination with 10% citric acid (CA) and apple vinegar (AV). The antibacterial effect of the following solutions was measured by direct contact test against Enterococcus faecalis: 2.5% NaOCl, 2.5% NaOCl + 10% CA (7:3), 2.5% NaOCl + AV (5:5), 10% CA, and AV. Sterile saline was used as control. The colony-forming units were determined by serial decimal dilutions.Results. The combination of 2.5% NaOCl with CA or AV lowered the pH and the chlorine content. NaOCl, alone or in combination was able to eliminate E. faecalis in 30 seconds, and CA, after 10 minutes. AV promoted reduction (32.2%) after 10 minutes.Conclusions. NaOCl with acidic solutions lowered the pH and the chlorine content, but did not alter its antibacterial effect. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2011; 112:132-135)

Stress responses of the fish Nile tilapia subjected to electroshock and social stressors

Plasma cortisol and glucose levels were measured in 36 adult Nile tilapia males, Oreochromis niloticus (standard length, mean ± SD, 14.38 ± 1.31 cm), subjected to electroshock and social stressors. Pre-stressor levels were determined 5 days after the adjustment of the fish to the experimental aquaria (1 fish/aquarium). Five days later, the effects of stressors on both cortisol and glucose levels were assessed. The following stressors were imposed for 60 min: pairing with a larger resident animal (social stressor), or a gentle electroshock (AC, 20 V, 15 mA, 100 Hz for 1 min every 4 min). Each stressor was tested in two independent groups, one in which stress was quantified immediately after the end of the 60-min stressor imposition (T60) and the other in which stress was quantified 30 min later (T90). Pre-stressor values for cortisol and glucose were not statistically different between groups. Plasma cortisol levels increased significantly and were of similar magnitude for both electroshock and the social stressor (mean ± SD for basal and final samples were: electroshock T60 = 65.47 ± 15.3, 177.0 ± 30.3; T90 = 54.8 ± 16.0, 196.2 ± 57.8; social stress T60 = 47.1 ± 9.0, 187.6 ± 61.7; T90 = 41.6 ± 8.1, 112.3 ± 26.8, respectively). Plasma glucose levels increased significantly for electroshock at both time points (T60 and T90), but only at T90 for the social stressor. Initial and final mean (± SD) values are: electroshock T60 = 52.5 ± 9.2, 115.0 ± 15.7; T90 = 35.5 ± 1.1, 146.3 ± 13.3; social stress T60 = 54.8 ± 8.8, 84.4 ± 15.0; T90 = 34.5 ± 5.6, 116.3 ± 13.6, respectively. Therefore, electroshock induced an increase in glucose more rapidly than did the social stressor. Furthermore, a significant positive correlation between cortisol and glucose was detected only at T90 for the social stressor. These results indicate that a fish species responds differently to different stressors, thus suggesting specificity of fish stress response to a stressor.

Two new species of Brachycephalus (Anura : Brachycephalidae) from the Atlantic Forest in Parana State, Southern Brazil

Two new species of brachycephalid frogs are described from Pico Marumbi, municipality of Morretes, and Pico da Igreja, municipality of Guaratuba, Parana State, southern Brazil. The new species share the following attributes: body bufoniform; skin on top of the head, and central part of the back body smooth with no dermal co-ossification; outer metatarsal tubercle distinct; dermal roofing bones of skull unornamented; all paired cranial bones distinct and not fused; quadratojugals, and maxillary odontoids present. The new species from Pico Marumbi is characterized by male SVL = 11.6-12.5 and female SVL = 13.0-14.5 turn; and general color orange with dorsal reddish-brown irregular markings, lateral surfaces with small dark brown spots, and belly with brownish spots and small dots. The new species from Pico da Igreja is characterized by male SVL = 12.6-13.9 and female SVL = 14.6-15.3 mm; and general color orange, lateral surfaces with small dark brown spots, and belly with brownish coalescent spots and small dots. Comparisons with other brachycephalid species and osteological data are provided.

Genomic imbalances in esophageal squamous cell carcinoma identified by molecular cytogenetic techniques

This review summarizes the chromosomal changes detected by molecular cytogenetic approaches in esophageal squamous cell carcinoma (ESCC), the ninth most common malignancy in the world. Whole genome analyses of ESCC cell lines and tumors indicated that the most frequent genomic gains occurred at 1, 2q, 3q, 5p, 6p, 7, 8q, 9q, 11q, 12p, 14q, 15q, 16, 17, 18p, 19q, 20q, 22q and X, with focal amplifications at 1q32, 2p16-22, 3q25-28, 5p13-15.3, 7p12-22, 7q21-22, 8q23-24.2, 9q34, 10q21, 11p11.2, 11q13, 13q32, 14q13-14, 14q21, 14q31-32, 15q22-26, 17p11.2, 18p11.2-11.3 and 20p11.2. Recurrent losses involved 3p, 4, 5q, 6q, 7q, 8p, 9, 10p, 12p, 13, 14p, 15p, 18, 19p, 20, 22, Xp and Y. Gains at 5p and 7q, and deletions at 4p, 9p, and 11q were significant prognostic factors for patients with ESCC. Gains at 6p and 20p, and losses at 10p and 10q were the most significant imbalances, both in primary carcinoma and in metastases, which suggested that these regions may harbor oncogenes and tumor suppressor genes. Gains at 12p and losses at 3p may be associated with poor relapse-free survival. The clinical applicability of these changes as markers for the diagnosis and prognosis of ESCC, or as molecular targets for personalized therapy should be evaluated.

Measurement of W+W- production and search for the Higgs boson in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Development and characterization of polymorphic microsatellite markers for the sweet orange (Citrus sinensis L. Osbeck)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Composição química e energia metabolizável de híbridos de milho para frangos de corte

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relationship between Candida and nocturnal denture wear: quantitative study

The purpose of this study was to evaluate the relationship between Candida and denture wear during the night. Twenty-four edentulous volunteers were randomly divided into two groups. Group I (GI, n = 11) was composed of volunteers who wore their complete dentures day and night and Group H (GII, n = 13) was composed of volunteers who wore their complete dentures only during the day. Three examination periods were performed for both groups. In GI, the first examination (A) was carried out after overnight denture wearing. Subsequent examinations were conducted after one (B) and seven nights (C) without denture use during sleep. In GII, the first (A) was done without previous use during sleep, and the following were carried out after one (B) and seven nights (C) of overnight denture wearing. Total un-stimulated saliva was collected in a sterile container and cultured in duplicate inside Petri dishes. The values of colony forming units (CFU mL(-1) +/- s.d.) were obtained: GI A - 10.1 x 10(3) +/- 1.2 x 10(4), B - 2.0 x 10(3) +/- 2.6 x 10(3), and C - 2.6 x 10(3) +/- 5.9 x 10(3) and GII: A - 0.4 x 10(3) +/- 0.6 x 10(3), B - 9.4 x 10(3) +/- 17.7 x 10(3) and C - 6.3 x 10(3) +/- 15.3 x 10(3). The mean counts for Candida sp. were expressed as log (CFU + 1) mL(-1) and statistical significance of differences among groups was tested by ANOVA (alpha = 0.05). Multiple comparisons were performed according to Bonferroni test and indicated significant differences between A-B and A-C, but not between B and C for both groups. It was concluded that there is a significant relationship between continuous denture wear and Candida sp.

THE EFFECTS OF FOREBRAIN MULTIPLE LESIONS ON THE PRESSOR-RESPONSE INDUCED BY BILATERAL CAROTID OCCLUSION IN CONSCIOUS RATS

In the present study, the effects of electrolytic lesions of the anteroventral third ventricle (AV3V) region and of the medial forebrain bundle (MFB) on the pressor response induced by bilateral carotid occlusion (BCO) in conscious intact and aortic baroreceptor-denervated (AD) rats were investigated. In intact control rats, BCO during 60 s produced a pressor response that could be divided into an early response (ER = 50 +/- 3 mmHg) that reachs a peak during the first 20 s and a sustained late response (LR), smaller than ER (32 +/- 2 mmHg), observed during the last 30 s. In intact-innervated rats, AV3V lesion (2 days) reduced ER (22 +/- 3 mmHg) and LR (16 +/- 2 mmHg), whereas the bilateral MFB lesions (6 days) mainly reduced LR (9 +/- 1 mmHg). Rats with simultaneous lesion of both the AV3V region and the MFB showed additional reduction of the ER (15 +/- 3 mmHg), but not LR (11 +/- 1 mmHg) when compared to the effect of MFB lesions alone. Compared to the AV3V lesion alone, LR but not ER was reduced in rats with a double lesion. In sham-lesioned rats, AD induced a significant increase in the pressor response to BCO (ER = 75 +/- 4 mmHg and LR = 65 +/- 3 mmHg) when compared to intact controls. A similar reduction in ER and LR was observed in AD rats after AV3V (ER = 35 +/- 3 mmHg and LR = 40 +/- 2 mmHg) and MFB (ER = 49 +/- 6 mmHg and LR = 41 +/- 5 mmHg) lesions alone or combined (ER = 40 +/- 6 mmHg and LR = 35 +/- 7 mmHg). The results showed that simultaneous lesions of both the AV3V region and the MFB practically abolished the pressor response to BCO. They also suggested that aortic baroreceptor activity plays a significant role in the effects of AV3V and MFB lesions on the pressor response to BCO.

Effects of aerobic endurance training status and specificity on oxygen uptake kinetics during maximal exercise

The main purpose of this study was to analyze the effects of exercise mode, training status and specificity on the oxygen uptake ((V)over dot O-2) kinetics during maximal exercise performed in treadmill running and cycle ergometry. Seven runners (R), nine cyclists (C), nine triathletes (T) and eleven untrained subjects (U), performed the following tests on different days on a motorized treadmill and on a cycle ergometer: (1) incremental tests in order to determine the maximal oxygen uptake ((V)over dot O-2max) and the intensity associated with the achievement of (V)over dot O-2max (I(V)over dot O-2max); and (2) constant work-rate running and cycling exercises to exhaustion at I(V)over dot O-2max to determine the effective time constant of the (V)over dot O-2 response (tau(V)over dot O-2). Values for (V)over dotO(2max) obtained on the treadmill and cycle ergometer [R=68.8 (6.3) and 62.0 (5.0); C=60.5 (8.0) and 67.6 (7.6); T=64.5 (4.8) and 61.0 (4.1); U=43.5 (7.0) and 36.7 (5.6); respectively] were higher for the group with specific training in the modality. The U group showed the lowest values for VO2max, regardless of exercise mode. Differences in tau(V)over dot O-2 (seconds) were found only for the U group in relation to the trained groups [R=31.6 (10.5) and 40.9 (13.6); C=28.5 (5.8) and 32.7 (5.7); T=32.5 (5.6) and 40.7 (7.5); U=52.7 (8.5) and 62.2 (15.3); for the treadmill and cycle ergometer, respectively]; no effects of exercise mode were found in any of the groups. It is concluded that tauVO(2) during the exercise performed at I(V)over dot O-2max is dependent on the training status, but not dependent on the exercise mode and specificity of training. Moreover, the transfer of the training effects on tau(V)over dotO(2) between both exercise modes may be higher compared with (V)over dot O-2max.

Synthesis, characterization and electrochemical study of layered double hydroxides intercalated with 2-thiophenecarboxylate anions

The synthesis, characterization, and electrochemical study of the Zn(II)-Al(III) and Zn(II)-Cr(III) Layered Double Hydroxides (LDHs) containing 2-thiopenecarboxylate as the interlayer anions are described. The LDHs were prepared by the constant pH coprecipitation technique followed by hydrothermal treatment for 72 h. The materials were analyzed by PXRD, FT-IR, C-13 CP-MAS, EDX, TEM, and CV. The presence of the organic heterocyclic anions was confirmed by FT-IR and the related solid-state C-13 NMR data strongly suggested that these were dimerised during coprecipitation. Accordingly, the basal spacing found by the X-ray technique was similar to 15.3 Angstrom, a distance coincident with the formation of bilayers of the intercalated anions. The structural organization of all the new materials was greatly enhanced by hydrothermal treatment, as shown by PXRD. The improved organization of the bilayered structures had a strong influence in the electrochemical behaviour of clay-modified electrodes produced with these materials, such as the diminished resistance to the ionic flow through the LDHs films. (C) 2003 Elsevier Ltd. All rights reserved.

Effect of microwave sterilization and water storage on the Vickers hardness of acrylic resin denture teeth

Statement of problem. Acrylic resin denture teeth soften upon immersion in water, and the heating generated during microwave sterilization may enhance this process.Purpose. Six brands of acrylic resin denture teeth were investigated with respect to the effect of microwave sterilization and water immersion on Vickers hardness (VHN).Material and Methods. The acrylic resin denture teeth (Dentron [D], Vipi Dent Plus [V], Postaris [P], Biolux [B], Trilux [T], and Artiplus [A]) were embedded in heat-polymerized acrylic resin within polyvinylchloride tubes. For each brand, the occlusal surfaces of 32 identical acrylic resin denture posterior teeth were ground flat with 1500-grit silicon carbide paper and polished on a wet polishing wheel with a slurry of tin oxide. Hardness tests were performed after polishing (control group, C) after polishing followed by 2 cycles of microwave sterilization at 650 W for 6 minutes (MwS group), after polishing followed by 90-day immersion in water (90-day Wim group), and after polishing followed by 90-day storage in water and 2 cycles of microwave sterilization (90-day Wim + MwS group). For each specimen, 8 hardness measurements were made and the mean was calculated. Data were analyzed with a 2-way analysis of variance followed by the Bonferroni procedure to determine any significance between pairs of mean values (alpha=.01).Results: Mircrowave sterilization of specimens significantly decreased (P <.001) the hardness of the acrylic resin denture tooth specimens P (17.8 to 16.6 VHN, V (18.3 to 15.8 VHN), T (17.4 to 15.3 VHN), B (16.8 to 15.7 VHN), and A (17.3 to 15.7 VHN). For all acrylic resin denture teeth, no significant differences in hardness were found between the groups Mws, 90-day Wim, and 90-day Wim + MwS, with the exception of the 90-day Wim + MwS tooth A specimens (14.4 VHN), which demonstrated significant lower mean values (P <.001) than the 90-day Wim (15.8 VHN) and MwS (15.7 VHN) specimens.Conclusions. For specimens immersed in water for 90 days, 2 cycles of microwave sterilization had no effect on the hardness of most of the acrylic resin denture teeth.

Small angle X-ray scattering and IR spectroscopy study of metal carbonyl complexes immobilized on a silica gel surface chemically modified with piperazine

The carbonyl complexes [WCl(CO)(3)(bipy) (HgCl)] (1), [Fe(CO)(4)(HgCl)(2)] (2) and W(CO)(6)] (3) were immobilized on a silica gel surface organofunctionalized with piperazine groups. The products obtained were studied by IR spectroscopy and small angle X-ray scattering (SAXS) techniques. The IR data show that the immobilization of heterobimetallic compounds 1 and 2, on the functionalized surface, occurred through the mercury atom, while for 3 the displacement of one CO group by the nitrogen of a piperazine molecule was observed. The data obtained from SAXS indicate that particles have a uniform size and reveal suitable modifications on the functionalized surface after immobilization of metal carbonyl complexes. The average intermolecular distance (l(ij)) for piperazine ligands on support is 8.7 Angstrom, for the metal carbonyl complex 1 it is 18.8 Angstrom, for complex 2 it is 16.2 Angstrom and for complex 3 it is 15.3 Angstrom. Copyright (C) 1996 Elsevier B.V. Ltd

Electrostatic force microscopy as a tool to estimate the number of active potential barriers in dense non-Ohmic polycrystalline SnO2 devices

In the present work, electroactive grain boundaries of highly dense metal oxide SnO2-based polycrystalline varistors were determined by electrostatic force microscopy (EFM). The EFM technique was applied to identify electroactive grain boundaries and thus estimate the amount of active grain boundary, which, in the metal oxide SnO2-based varistor, was calculated at around 85%, i.e., much higher than that found in traditional metal oxide ZnO-based varistors. The mean potential barrier height value obtained from the EFM analysis was in complete agreement with the values calculated from the C-V measurements, together with a complex capacitance plane analysis that validates the methodology proposed here. (c) 2006 American Institute of Physics.