Bayesian dialogue system for the let's go spoken dialogue challenge

This paper describes how Bayesian updates of dialogue state can be used to build a bus information spoken dialogue system. The resulting system was deployed as part of the 2010 Spoken Dialogue Challenge. The purpose of this paper is to describe the system, and provide both simulated and human evaluations of its performance. In control tests by human users, the success rate of the system was 24.5% higher than the baseline Lets Go! system. ©2010 IEEE.

Livelihood and seed mortality related vulnerability of carp seed traders of Bangladesh

Carp seed traders in Bangladesh are considered as one of the poorest, most vulnerable and least studied sub-population. Millions of fingerlings are transported annually to various parts of the country using bus tops and/or truck-beds in open and hand agitated method by the traders and as a result they encounter mass seed mortality. They are the key players in augmenting aquaculture activities by distributing fish fry and fingerlings to the fish farmers. Assessment of the seed sources and the livelihood of the traders are important to identify their point of entry to the aquaculture sector and further improvement. Status of household asset, income profiles, and risks involved were examined using DFID's sustainable livelihood approach (SLA) framework. Tools used to collect data included group discussions (GD), semi-structured and structured household (HH) survey. Samples (n=637) were randomly drawn purposefully from 10% of the carp seed traders within 11 districts. Sampled HH were classified into six land classes.

Effects of furanace on Brachionus

Tiger prawn P.monodon) larvae utilize Brachionus a rotifer, as food in the Zoea 3 and mysis stages when they change from an herbivorous to an omnivorous diet. The present work aims to show the effects of furanace on the population growth of Brachionus. Cultures of Brachionus were obtained and fed with Chlorella at a density of 1-2x10 SUP-6 cells/ml. Five liters of the culture water were placed in each of 4 white, circular, 152x304 mm plastic basins. The mean initial densities of the rotifer ranged from 26 . 5 to 38 . 5 individuals/ml. The concentrations of furanace were 0, 1, 2 and 3 mg /l. The cultures were vigorously aerated. Population growth was observed after 3, 6, and 9 hours of exposure. The cultures were thoroughly mixed before samples were taken to ensure an almost equal distribution of the rotifers in the water. To facilitate the counting of the rotifer, one drop of Lugol's solution was added to each sample. This immobilizes the rotifer as well as stops further reproduction. Individuals with only the lorica left or with badly deformed lorica were considered dead. Population counts were done using a Sedgwick-Rafter counting chamber. Among the different durations of exposure, the percentage survival of the populations in the furanace baths were highest after 3 hr. There were slight increases in the control and 2 mg/l and slight decreases in 1 and 3 mg/l. The differences in the mean densities are statistically insignificant at . 01 significance level. After a 6-hr exposure, the control population reached its peak density with a survival of 89%. Populations in furanace baths decreased to 88 . 5% in both 2 and 3 mg /l followed closely by 87% in 1 mg/l. Again, no statistical differences exist among all the levels. The mean percentage survival in 1 and 2 mg/l increased (89% and 91%, respectively) after a 9-hr expsoure, while those in the control and 3 mg/l decreased to 86 . 5% and 88 . 25%, respectively. There were no marked differences in appearance noted among the individuals in furanace baths and those in the control.

Spoken Dialog Challenge 2010: Comparison of live and control test results

The Spoken Dialog Challenge 2010 was an exercise to investigate how different spoken dialog systems perform on the same task. The existing Let's Go Pittsburgh Bus Information System was used as a task and four teams provided systems that were first tested in controlled conditions with speech researchers as users. The three most stable systems were then deployed to real callers. This paper presents the results of the live tests, and compares them with the control test results. Results show considerable variation both between systems and between the control and live tests. Interestingly, relatively high task completion for controlled tests did not always predict relatively high task completion for live tests. Moreover, even though the systems were quite different in their designs, we saw very similar correlations between word error rate and task completion for all the systems. The dialog data collected is available to the research community. © 2011 Association for Computational Linguistics.

Polymer waveguide-based backplanes for board-level optical interconnects

Optical interconnects are increasingly considered for use in high-performance electronic systems. Multimode polymer waveguides are a promising technology for the formation of optical backplane as they enable cost-effective integration of optical links onto standard printed circuit boards. In this paper, two different types of polymer waveguide-based optical backplanes are presented. The first one implements a passive shuffle architecture enabling non-blocking on-board optical interconnection between different cards/modules, while the second one deploys a regenerative bus architecture allowing the interconnection of an arbitrary number of electrical cards over a common optical bus. The polymer materials and the multimode waveguide components used to form the optical backplanes are presented, while details of the interconnection architectures and design of the backplanes are described. Proof-of-principle demonstrators fabricated onto low-cost FR4 substrates, including a 10-card 1 Tb/s-capacity passive shuffle router and 4-channel 3-card polymeric bus modules, are reported and their optical performance characteristics are presented. Low-loss, low-crosstalk on-board interconnection is achieved and error-free (BER10 12) 10 Gb/s communication between different card/module interfaces is demonstrated in both polymeric backplane systems. © 2012 IEEE.

Compact multimode polymer waveguide bends for board-level optical interconnects

Multimode polymer waveguides are promising for use in board-level optical interconnects. In recent years, various on-board optical interconnection architectures have been demonstrated making use of passive routing waveguide components. In particular, 90° bends have played important roles in complex waveguide layouts enabling interconnection between non co-linear points on a board. Due to the dimensions and index step of the waveguides typically used in on-board optical interconnects, low-loss bends are typically limited to a radius of ∼ 10 mm. This paper therefore presents the design and fabrication of compact low-loss waveguide bends with reduced radii of curvature, offering significant reductions in the required areas for on-board optical circuits. The proposed design relies on the exposure of the bend section to the air, achieving tighter light confinement along the bend and reduced bending losses. Simulation studies carried out with ray tracing tools and experimental results from polymer samples fabricated on FR4 are presented. Low bending losses are achieved from the air-exposed bends up to 4 mm of radius of curvature, while an improvement of 14 μm in the 1 dB alignment tolerances at the input of these devices (fibre to waveguide coupling) is also obtained. Finally, the air-exposed bends are employed in an optical bus structure, offering reductions in insertion loss of up to 3.8 dB. © 2013 IEEE.

Multimode polymer waveguide components for complex on-board optical topologies

Multimode polymer waveguides are an attractive transmission medium for board-level optical links as they provide high bandwidth, relaxed alignment tolerances, and can be directly integrated onto conventional printed circuit boards. However, the performance of multimode waveguide components depends on the launch conditions at the component input, complicating their use in topologies that require the concatenation of multiple multimode components. This paper presents key polymer components for a multichannel optical bus and reports their performance under different launch conditions, enabling useful rules that can be used to design complex interconnection topologies to be derived. The components studied are multimode signal splitters and combiners, 90°-crossings, S-bends, and 90°-bends. By varying the width of the splitter arms, a splitting ratio between 1% and 95% is achieved from the 1 × 2 splitters, while low-loss signal combining is demonstrated with the waveguide combiners. It is shown that a 3 dB improvement in the combiner excess loss can be achieved by increasing the bus width by 50 μm. The worst-case insertion loss of 50 × 100 μm waveguide crossings is measured to be 0.1 dB/crossing. An empirical method is proposed and used to estimate the insertion losses of on-board optical paths of a polymeric four-channel optical bus module. Good agreement is achieved between the predicted and measured values. Although the components and empirical method have been tailored for use in a multichannel optical bus architecture, they can be used for any on-board optical interconnection topology. © 1983-2012 IEEE.

Waveguide based compact silicon Schottky photodetector with enhanced responsivity in the telecom spectral band.

We experimentally demonstrate an on-chip compact and simple to fabricate silicon Schottky photodetector for telecom wavelengths operating on the basis of internal photoemission process. The device is realized using CMOS compatible approach of local-oxidation of silicon, which enables the realization of the photodetector and low-loss bus photonic waveguide at the same fabrication step. The photodetector demonstrates enhanced internal responsivity of 12.5mA/W for operation wavelength of 1.55µm corresponding to an internal quantum efficiency of 1%, about two orders of magnitude higher than our previously demonstrated results [22]. We attribute this improved detection efficiency to the presence of surface roughness at the boundary between the materials forming the Schottky contact. The combination of enhanced quantum efficiency together with a simple fabrication process provides a promising platform for the realization of all silicon photodetectors and their integration with other nanophotonic and nanoplasmonic structures towards the construction of monolithic silicon opto-electronic circuitry on-chip.

Locally oxidized silicon surface-plasmon Schottky detector for telecom regime.

We experimentally demonstrate an on-chip nanoscale silicon surface-plasmon Schottky photodetector based on internal photoemission process and operating at telecom wavelengths. The device is fabricated using a self-aligned approach of local-oxidation of silicon (LOCOS) on silicon on insulator substrate, which provides compatibility with standard complementary metal-oxide semiconductor technology and enables the realization of the photodetector and low-loss bus photonic waveguide at the same fabrication step. Additionally, LOCOS technique allows avoiding lateral misalignment between the silicon surface and the metal layer to form a nanoscale Schottky contact. The fabricated devices showed enhanced detection capability for shorter wavelengths that is attributed to increased probability of the internal photoemission process. We found the responsivity of the nanodetector to be 0.25 and 13.3 mA/W for incident optical wavelengths of 1.55 and 1.31 μm, respectively. The presented device can be integrated with other nanophotonic and nanoplasmonic structures for the realization of monolithic opto-electronic circuitry on-chip.

Locally oxidized silicon surface-plasmon Schottky detector for telecom regime

We experimentally demonstrate an on-chip nanoscale silicon surface-plasmon Schottky photodetector based on internal photoemission process and operating at telecom wavelengths. The device is fabricated using a self-aligned approach of local-oxidation of silicon (LOCOS) on silicon on insulator substrate, which provides compatibility with standard complementary metal-oxide semiconductor technology and enables the realization of the photodetector and low-loss bus photonic waveguide at the same fabrication step. Additionally, LOCOS technique allows avoiding lateral misalignment between the silicon surface and the metal layer to form a nanoscale Schottky contact. The fabricated devices showed enhanced detection capability for shorter wavelengths that is attributed to increased probability of the internal photoemission process. We found the responsivity of the nanodetector to be 0.25 and 13.3 mA/W for incident optical wavelengths of 1.55 and 1.31 μm, respectively. The presented device can be integrated with other nanophotonic and nanoplasmonic structures for the realization of monolithic opto-electronic circuitry on-chip. © 2011 American Chemical Society.

Design, fabrication and characterization of a high-performance microring resonator in silicon-on-insulator

A high-performance microring resonator in a silicon-on-insulator rib waveguide is realized by using the electron beam lithography followed by inductively coupled plasma etching. The design and the experimental realization of this device are presented in detail. In addition to improving relevant processes to minimize propagation loss, the coupling efficiency between the ring and the bus is carefully chosen to approach a critical coupling for high performance operating. We have measured a quality factor of 21,200 and an extinction ratio of 12.5dB at a resonant wavelength of 1549.32nm. Meanwhile, a low propagation loss of 0.89dB/mm in a curved waveguide with a bending radius of 40 mu m is demonstrated as well.

基于OSGi的服务协作总线的设计与实现

网络技术的快速发展和多变的业务需求使得软件功能日益复杂、规模日益庞大。面向服务架构作为一种新的计算范型，利用服务作为基本的构造单元，支持异构环境下分布式应用的快速、低成本开发。但是现有的面向服务架构实现方案在服务动态部署、动态生命周期管理，以及模块化方面均存在不足。OSGi（Open Service Gateway Initiative）提供了一种面向服务、基于组件的软件框架，易于构建模块化、动态可扩展的软件系统，在服务动态部署、生命周期管理，以及模块化方面具有优势。 论文首先分析了面向服务架构和OSGi技术的特点，以及相互之间的互补因素，在此基础上建立了一个服务协作总线概念架构，支持服务的动态部署、动态生命周期管理和透明协作。在该概念架构的基础上，设计了一种服务描述模型，以此为基础实现透明的OSGi服务发布与发现；扩展了OSGi服务部署和访问机制，实现分布透明的OSGi服务访问；通过声明式远程服务组件模型，实现了服务动态生命周期管理。在这些基础上，论文给出了服务协作总线系统OnceSCB的设计与实现。并通过应用案例和实验对OnceSCB的功能和非功能方面进行了评估。该服务协作总线实现远程服务的透明化访问以及远程服务与本地OSGi服务统一管理，提供透明的服务协作，形成一个基于服务协作的动态服务计算生态环境，为服务计算环境下服务开发、部署、管理提供支持。

总线型多工作流引擎接口系统的研究与应用

该文针对如何使不同企业,不同平台的多个工作流引擎协调工作,同时使工作流引擎和日趋增加的客户端、数据源更好地交互,提出了将表示、转换、时序控制功能从原有的应用层分离出来,形成总线模型的架构。以建筑业企业动态联盟工程为例,描述了建立该模型所用的方法、结构和技术。该模型为工作流管理系统的建模提供了新的思路。

A modified criterion for shear band formation in bulk metallic glass under complex stress states

A new criterion for shear band formation in metallic glasses is proposed based on the shear plane criterion proposed by Packard and Schuh [1]. This modified shear plane (MSP) criterion suggests that a shear band is not initiated randomly throughout the entire material under stress but is initiated at the physical boundaries or defects and at locations where the highest normal stress modified maximum shear stress occurs. Moreover, the same as in the shear plan criterion, the shear stress all over the shear band should exceed the shear yield strength of the material. For a complete shear band to form, both requirements need to be fulfilled. The shear yield strength of the material is represented by the shear stress of the point at which the shear band stops. The new criterion agrees very well with experimental results in both the determination of the shear yield strength and the shear band path. (C) 2010 Elsevier B.V. All rights reserved.

川西地区几种优势苔藓植株元素含量及其时空差异性

揭示苔藓植株元素含量及其时空差异性是深入开展利用苔藓植物指示环境和筛选理想监测藓种的科学基础。采用微波消解（ICP-AES）方法对九寨沟自然遗产地原始林景点停车场周围三个采样带：I为停车场植被小岛（PS），向外约120 m半径为II带（D120），再向外距离约1,000 m为III带（D1000）和3个方向上的大羽藓和毛尖青藓2种苔藓中13种元素（A1, S, Ca, P, Cu, Fe, K, Mg, Mn, Pb, Ni,Zn和Cd）含量进行了测定和比较，并对采自边坡方向（PS-3）上2005和2007年的4种苔藓植物（南木藓、大羽藓、平藓和厚角絹藓）也进行了13种元素含量的测定和比较。同时对九寨沟自然遗产地、黄龙自然遗产地、夹金山和梦笔山的冷杉原始林4个地区的3种苔藓中（大羽藓、锦丝藓和塔藓）的A1、Ca、Cu、Fe、K、Mg、P、Zn、C和N 10种元素含量进行测定和比较。 对大羽藓和毛尖青藓2种苔藓植物内13种元素的测定发现：1）同种苔藓对不同元素的富集能力不同。A1、Ca、K、Mg和P的元素含量在苔藓中的富集较其他元素的要高。2）不同种苔藓植物对同种元素的富集能力不同，毛尖青藓较大羽藓能够监测出更多的元素；对于被检测出的元素，毛尖青藓监测出的累积量大于大羽藓，其中累积量最大的元素是Ca为10 874.286 μg.g-1.year-1，最小的是Cu元素为5.438 μg.g-1.year-1。对05年和07年的平藓、大羽藓、南木藓和厚角絹藓元素含量的测定表明：元素在两年中的积累量是不同的。综合分析表明，苔藓生物监测方法可有效监测景点停车场机动车尾气中排放出的典型元素（如Cu、Pb、Ni、Zn、Cd等）含量，而毛尖青藓较大羽藓能更可靠的监测九寨沟自然遗产地单景点汽车尾气金属元素种类及其排放量。 对4个地区3种苔藓10种元素监测发现：1）Ca、Mg、Zn、K和Cu元素在黄龙地区的含量高于在其它地区的含量；P元素在梦笔山地区的含量为最高；Fe和Al元素在夹金山地区的含量高于在其它地区的含量。2）C元素在其它因素一致的情况下，进行不同年龄间的元素含量比较，结果显示元素含量在各年龄间并不存在明显的差异性；N元素含量与年龄的差异出现在黄龙林下及林窗的塔藓、九寨沟林下的锦丝藓及塔藓和梦笔山的塔藓中，而在锦丝藓中未出现元素含量与年龄的差异性；塔藓能检测出更多的元素种类其含量与年龄间存在显著差异，锦丝藓检测到的元素种类次之；除锦丝藓（锦丝藓在林窗中几乎检测不到元素含量与年龄间的差异性）外，其他两种藓在林窗中能检测出的元素种类大于在林下的检测种类。3）元素含量与生境间存在差异性的元素分别有：黄龙大羽藓中的Ca、P和Mg元素；九寨锦丝藓中的Zn元素；夹金山塔藓中的Al、Fe和Zn元素；梦笔山大羽藓中的Al、Fe和Mg元素及锦丝藓中的Ca元素。4）区域、年龄和生境因素对苔藓植株元素含量均达到了显著水平，但两两之间及三者之间的交互作用由于元素种类的不同存在差异。综合分析表明，苔藓植物中的元素含量受年龄、区域的影响较生境的更大。 The revelation of mosses elements content and its spatiotemporal differences is the scientific foundation of moss monitoring. To determine the feasibility of moss monitoring metal depositions derived from travel bus emiss ions in scenic spot, we collected one year-growth samples of two mosses Brachythecim piligerum and Thuidium cymbifolium with different distance (island center, 120m，1000m ) and different direction (north, south and east) far from parking site island from Yuanshilin Spot at Jiuzhaigou World Nature Heritage in the Western Sichuan of China and determined thirteen element （A1, S, Ca, P, Cu, Fe, K, Mg, Mn, Pb, Ni, Zn, Cd）contents by ICP-AES analysis method. And picked 4 kinds of mosses (Macrothamnium macrocarpu m（Reinw. etHornsch.）Fleisch.，Thuidium cymbifolium，Entodon concinnus (De Not.) Par., Neckera pennata) from the direction PS-3 in 2005 and 2007, determined 13 element contents. Collected 3 kinds of moss (Thuidium cymbifo lium, Actinothuidium Hookeri (Mitt.) and Hyolcomium splendens (Hedw.) from Jiuzhaigou natural heritage, Huanglong natural heritage, Mt. Jiajin and Mt. Mengbi in primeval forest with two habitat (undergrowth and forest gap), determined element contents of A1, Ca, Cu, Fe, K, Mg, P, Zn, C and N. We found that, 1) The elements content are difference in same type of moss. Content of A1, Ca, K, Mg and P are higher than others. 2) While the contents of A1, S, Ca, P, Cu, Fe, K and Zn had significant correlation with the different distances from parking site, the nearer the distance was, the more accumulation was; 2) Comparing to Thuidium cymbifolium, Brachythecium piligerum can test more elements which contents show the significant correlation with distances. And Brachythecium piligerum can have greater element accumulation than Thuidium cymbifolium. The element contents in two years (2005 and 2007) are different. The present study found that moss can reliably bio-indicate metal deposition from traffic emissions in one scenic spot and Brachythecium piligerum is a good moss for bio-indicating element content from traffic emissions at Jiuzhaigou World natural Heritage. Determined the 10 element contents in 4 areas through 3 kinds of moss we found that, 1) Ca, Mg, Zn, K and Cu element content is higher in the Huanglong area than in other areas, The P element content in Mt. Jiajin is higher than other areas, Fe and Al element content is higher in the Mt. Jiajin than in other areas. 2) The content of C had no significant correlation with age. As for N, this significant correlation found in Hyolcomium splendens (Hedw.) with 2 habitat in Huanglong, Actinothuidium Hookeri (Mitt.) and Hyolcomium splendens (Hedw.) with undergrowth in Jiuzhai, Hyolcomium splendens (Hedw.) in Mt. Mengbi. The types of elements which content showt he significant correlation are most in Hyolcomium splendens (Hedw.) and least in Thuidium cymbifolium. Except Actinothuidium Hookeri (Mitt.), the types of elements that content had significant correlation with age in forest gap are more than in undergrowth. 3) The elements which content had significant correlation with habitat are P, Ca and Mg in Thuidium cymbifolium in Huanglong, Zn in Actinothuidium Hookeri (Mitt.) in Jiuzhai, Al, Fe and Zn in Hyolcomium splendens (Hedw.) in Mt. Jiajin, in Mt. Mengbi Al, Fe and Mg in Thuidium cymbifolium and Ca in Actinothuidium Hookeri (Mitt.). 4）The region, the age and the habitat factor has coeffect element content. The correlationship between element contents and the age, the region is closer than habitat.