Provision of ecological infrastructures to increase pollinators and other beneficial organisms in rainfed crops in Central Spain

In sustainable intensive agriculture, the biodiversity of monoculture fields can be increased by managing the field margins to provide ecological infrastructures that serve as refuges and resources for beneficial organisms (pollinators and natural enemies). In the present work we summarize two years of field trials following the goal to increase biodiversity of beneficial fauna in a barley field in Central Spain by sowing different herbaceous mixtures in the field margins. The presence of arthropods visiting flowers on plots sown with different types of seed mixtures and unsown natural flora (control plot) was compared by visual sampling every week between April and June. The results showed that a combination of herbaceous big-size seeds was the most successful mixture emerging under our experimental conditions and achieved a higher number of visits of beneficial arthropods than the unsown natural vegetation.

Capacidad y comportamiento de la adsorción de fenol en caolines naturales y modificados

En la actualidad las industrias químicas, farmacéuticas y clínicas, originan contaminantes en aguas superficiales, aguas subterráneas y suelos de nuestro país, como es el caso del fenol, contaminante orgánico común y altamente dañino para los organismos, incluso a bajas concentraciones. Existen en el mercado diferentes metodologías para minimizar la contaminación pero muchos de estos procesos tienen un alto coste, generación de contaminantes, etc. La adsorción de contaminantes por medio de arcillas es un método ampliamente utilizado, encontrándose eficaz y económico. Pero la dificultad de adsorber un contaminante orgánico como el fenol motiva la creación de un material llamado organoarcillas. Las organoarcillas son arcillas modificadas con un surfactante, a su vez, los surfactantes son moléculas orgánicas que confieren a la superficie de la arcilla carga catiónica en lugar de aniónica, haciendo más fácil la adsorción de fenol. Para esta tesis se ha elegido el caolín como material adsorbente, fácilmente disponible y relativamente de bajo coste. Se ha trabajado con: arenas de caolín, material directo de la extracción, y caolín lavado, originado del proceso de lavado de las arenas de caolín. Ambos grupos se diferencian fundamentalmente por su contenido en cuarzo, ampliamente mayor en las arenas de caolín. Con el objetivo de desarrollar un material a partir del caolín y arenas de éste con capacidad de retención de contaminates, en concreto, fenol, se procedió a modificar los materiales de partida mediante tratamientos térmicos, mecánicos y/o químicos, dando lugar a compuestos con mayor superficie química reactiva. Para ello se sometió el caolín y las arenas caoliníferas a temperaturas de 750ºC durante 3h, a moliendas hasta alcanzar su amorfización, y/o a activaciones con HCl 6M o con NaOH 5M durante 3h a 90ºC. En total se obtuvieron 18 muestras, en las que se estudiaron las características físico-químicas, mineralógicas y morfológicas de cada una de ellas con el fin de caracterizarlas después de haber sufrido los tratamientos y/o activaciones químicas. Los cambios producidos fueron estudiados mediante pH, capacidad de intercambio catiónico (CEC), capacidad de adsorción de agua (WCU y CWC), distribución de tamaño de partícula (PSD), área de superficie específica (SBET), difracción de rayos X (XRD), espectroscopía infrarroja por transformada de Fourier (FTIR), métodos térmicos (TG, DTG y DTA), y microscopía electrónica de transmisión y barrido (SEM y TEM). Además se analizó los cambios producidos por los tratamientos en función de las pérdidas de Al y Si que acontece en las 18 muestras. Los resultados para los materiales derivados de la arenas caoliníferas fueron similares a los obtenidos para los caolines lavados, la diferencia radica en la cantidad de contenido de caolinita en los diferente grupos de muestras. Apoyándonos en las técnicas de caracterización se puede observar que los tratamientos térmico y molienda produce materiales amorfos, este cambio en la estructura inicial sumado a las activaciones ácida y alcalina dan lugar a pérdidas de Si y Al, ocasionando que sus propiedades físico-químicas, mineralógicas y morfológicas se vean alteradas. Un fuerte aumento es observado en las áreas superficiales y en la CEC en determinadas muestras, además entre los cambios producidos se encuentra la producción de diferentes zeolitas en porcentajes distintos con el tratamiento alcalino. Para la obtención de las organoarcillas, las 18 muestras se sometieron a la surfactación con hexadeciltrimetil amonio (HDTMA) 20 mM durante 24h a 60ºC, esta concentración de tensioactivo fue más alta que la CEC de cada muestra. Los camext bios anteriormente producidos por los tratamientos y activaciones, afectan de forma diferente en la adsorción de HDTMA, variando por tanto la adsorción del surfactante en la superficie de las muestras. Se determinó el tensioactivo en superficie por FTIR, además se realizó un análisis de componentes principales (PCA) para examinar la dependencia entre las relaciones Si/Al de las muestras en la capacidad de adsorción de tensioactivo, y para el estudio de la adsorción de HDTMA en las muestras se realizaron además del análisis termogravimétrico, aproximaciones con los modelos de Freundllich y Langmuir. Se persigue conocer las diferentes formas y maneras que tiene el tensioactivo de fijarse en la superficie de las muestras. En las organoarcillas resultantes se cuantificó el fenol adsorbido cuando éstas fueron puestas en contacto con diferentes concentraciones de fenol: 50, 500, 1000, 2000, y 2500 mg/l durante 24h. El contaminante sorbido se calculó por medio de cromatografía de gases, y se realizaron aproximaciones con los modelos de Freundllich y Langmuir. El comportamiento de adsorción de fenol en arcillas orgánicas es regido por las características de las muestras. De forma general se puede decir que las muestras de caolines lavados tienen más capacidad de adsorción de fenol que las muestras de arenas de caolín y que la activación alcalina ha proporcionado una mejora en la adsorción de fenol en los dos grupos. En consecuencia se han obtenido materiales adsorbentes heterogéneos y por tanto, con propiedades diferentes. Se ha evaluado el comportamiento global de las arenas de caolín por un lado y del caolín lavado por otro. Las arenas de caolín presentan altos niveles de cuarzo y su uso para ciertos tipos de industrias no son recomendados en ocasiones por el alto costo que el proceso de limpieza y purificación implicaría. Por ello es importante reseñar en este proyecto las aplicaciones que ofrecen algunas muestras de este grupo. Los ensayos acontecidos en esta tesis han dado lugar a las siguientes publicaciones: • Pérdida de Al y Si en caolines modificados térmica- o mecánicamente y activados por tratamientos químicos. A. G. San Cristóbal, C Vizcayno, R. Castelló. Macla 9, 113-114. (2008). • Acid activation of mechanically and thermally modfied kaolins. A. G. San Cristóbal, R. Castelló, M. A. Martín Luengo, C Vizcayno. Mater. Res. Bull. 44 (2009) 2103-2111. • Zeolites prepared from calcined and mechanically modified kaolins. A comparative study. A. G San Cristóbal, R. Castelló, M. A. Martín Luengo, C Vizcayno. Applied Clay Science 49 (2010) 239-246. • Study comparative of the sorption of HDTMA on natural and modified kaolin. A. G San Cristóbal, R. Castelló, J. M. Castillejo, C Vizcayno. Aceptada en Clays and Clay minerals. • Capacity of modified kaolin sand and washed kaolin to adsorb phenol. A. G San Cristóbal, R. Castelló, C Vizcayno. Envío a revista sujeto a la publicación del artículo anterior. ABSTRACT Today’s chemical, pharmaceutical and clinical industries generate pollutants that affect the soils and surface and ground waters of our country. Among these, phenol is a common organic pollutant that is extremely harmful to living organisms, even at low concentrations. Several protocols exist to minimize the effects of pollutants, but most are costly procedures or even generate other pollutants. The adsorption of hazardous materials onto clays is perhaps the most used, efficient and cost-saving method available. However, organic compounds such as phenol are difficult to adsorb and this has led to the development of materials known as organoclays, which are much better at remediating organic compounds. Organoclays are clays that have been modified using a surfactant. In turn, surfactants are organic molecules that confer a cationic rather than anionic charge to the clay surface, improving it’s capacity to adsorb phenol. For this doctorate project, kaolin was selected as an adsorbent material for the removal of phenol given its easy sourcing and relatively low cost. The materials investigated were kaolin sand, a directly extracted material, and washed kaolin, which is the byproduct of the kaolin sand washing process. The main difference between the materials is their quartz content, which is much higher in the kaolin sands. To generate a product from kaolin or kaolin sand capable of retaining organic pollutants such as phenol, both materials were subjected to several heat, chemical and/or mechanical treatments to give rise to compounds with a greater reactive surface area. To this end the two starting materials underwent heating at 750ºC for 3 h, grinding to the point of amorphization and/or activation with HCl 6M or NaOH 5M for 3 h at 90ºC. These treatments gave rise to 18 processed samples, which were characterized in terms of their morphological, mineralogical, and physical-chemical properties. The behaviour of these new materials was examined in terms of their pH, cation exchange capacity (CEC), water adsorption capacity (WCU and WCC), particle size distribution (PSD), specific surface area (SBET), and their X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermal (DTG, DTA) and scanning and transmission electron microscopy (SEM and TEM) properties. The changes conferred by the different treatments were also examined in terms of Al and Si losses. Results for the materials derived from kaolin sands and washed kaolin were similar, with differences attributable to the kaolinite contents of the samples. The treatments heat and grinding produced amorphous materials, which when subjected to acid or alkali activation gave rise to Si and Al losses. This in turn led to a change in physico- chemical, mineralogical and morphological properties. Some samples showed a highly increased surface area and CEC. Further, among the changes produced, alkali treatment led to the generation of zeolites in different proportions depending on the sample. To produce the organoclays, the 18 samples were surfacted with hexadecyltrimethylammonium (HDTMA) 20 mM for 24 h at 60ºC. This surfactant concentration is higher than the CEC of each sample. The amount of HDTMA adsorbed onto the surface of each sample determined by FTIR varied according to treatment. A principle components analysis (PCA) was performed to examine correlations between sample Si/Al ratios and surfactant adsorption capacity. In addition, to explore HDTMA adsorption by the samples, DTG and DTA data were fitted to Freundllich and Langmuir models. The mechanisms of surfactant attachment to the sample surface were also addressed. The amount of phenol adsorbed by the resultant organoclays was determined when exposed to different phenol concentrations: 50, 500, 1000, 2000, and 2500 mg/l for 24 h. The quantity of adsorbed pollutant was estimated by gas chromatography and the data fitted to the models of Freundllich and Langmuir. Results indicate that the phenol adsorption capacity of the surfacted samples is dependent on the sample’s characteristics. In general, the washed kaolin samples showed a greater phenol adsorption capacity than the kaolon sands and alkali activation improved this capacity in the two types of sample. In conclusion, the treatments used gave rise to adsorbent materials with varying properties. Kaolin sands showed high quartz levels and their use in some industries is not recommended due to the costs involved in their washing and purification. The applications suggested by the data obtained for some of the kaolin sand samples indicate the added value of this industrial by-product. The results of this research project have led to the following publications: • Pérdida de Al y Si en caolines modificados térmica- o mecánicamente y activados por tratamientos químicos. A. G. San Cristóbal, C Vizcayno, R. Castelló. Macla 9, 113-114. (2008). • Acid activation of mechanically and thermally modfied kaolins. A. G. San Cristóbal, R. Castelló, M. A. Martín Luengo, C Vizcayno. Mater. Res. Bull. 44 (2009) 2103-2111. • Zeolites prepared from calcined and mechanically modified kaolins. A comparative study. A. G. San Cristóbal, R. Castelló, M. A. Martín Luengo, C Vizcayno. Applied Clay Science 49 (2010) 239-246. • Study comparative of the sorption of HDTMA on natural and modified kaolin. A. G. San Cristóbal, R. Castelló, J. M. Castillejo, C Vizcayno Accepted in Clays and Clay minerals. • Capacity of modified kaolin sand and washed kaolin to adsorb phenol. A. G San Cristóbal, R. Castelló, C Vizcayno. Shipment postponed, subject to the publication of the previous article.

Identifying effective behavioural components of Intervention and Comparison group support provided in SMOKing cEssation interventions (IC-SMOKE) : a systematic review protocol

Funding The research described in this paper is funded by Cancer Research UK, registered under application number C50862/A18446. The systematic review protocol reported in this paper was previously peer-reviewed by Cancer Research UK as part of the funding process. The funders had no role in protocol design, decision to publish, or preparation of the manuscript.

Density-dependent decline of host abundance resulting from a new infectious disease

Although many new diseases have emerged within the past 2 decades [Cohen, M. L. (1998) Brit. Med. Bull. 54, 523–532], attributing low numbers of animal hosts to the existence of even a new pathogen is problematic. This is because very rarely does one have data on host abundance before and after the epizootic as well as detailed descriptions of pathogen prevalence [Dobson, A. P. & Hudson, P. J. (1985) in Ecology of Infectious Diseases in Natural Populations, eds. Grenfell, B. T. & Dobson, A. P. (Cambridge Univ. Press, Cambridge, U.K.), pp. 52–89]. Month by month we tracked the spread of the epizootic of an apparently novel strain of a widespread poultry pathogen, Mycoplasma gallisepticum, through a previously unknown host, the house finch, whose abundance has been monitored over past decades. Here we are able to demonstrate a causal relationship between high disease prevalence and declining house finch abundance throughout the eastern half of North America because the epizootic reached different parts of the house finch range at different times. Three years after the epizootic arrived, house finch abundance stabilized at similar levels, although house finch abundance had been high and stable in some areas but low and rapidly increasing in others. This result, not previously documented in wild populations, is as expected from theory if transmission of the disease was density dependent.

Stationary-phase mutation in the bacterial chromosome: Recombination protein and DNA polymerase IV dependence

Several microbial systems have been shown to yield advantageous mutations in slowly growing or nongrowing cultures. In one assay system, the stationary-phase mutation mechanism differs from growth-dependent mutation, demonstrating that the two are different processes. This system assays reversion of a lac frameshift allele on an F′ plasmid in Escherichia coli. The stationary-phase mutation mechanism at lac requires recombination proteins of the RecBCD double-strand-break repair system and the inducible error-prone DNA polymerase IV, and the mutations are mostly −1 deletions in small mononucleotide repeats. This mutation mechanism is proposed to occur by DNA polymerase errors made during replication primed by recombinational double-strand-break repair. It has been suggested that this mechanism is confined to the F plasmid. However, the cells that acquire the adaptive mutations show hypermutation of unrelated chromosomal genes, suggesting that chromosomal sites also might experience recombination protein-dependent stationary-phase mutation. Here we test directly whether the stationary-phase mutations in the bacterial chromosome also occur via a recombination protein- and pol IV-dependent mechanism. We describe an assay for chromosomal mutation in cells carrying the F′ lac. We show that the chromosomal mutation is recombination protein- and pol IV-dependent and also is associated with general hypermutation. The data indicate that, at least in these male cells, recombination protein-dependent stationary-phase mutation is a mechanism of general inducible genetic change capable of affecting genes in the bacterial chromosome.

Phenotypic variations among paternal centrosomes expressed within the zygote as disparate microtubule lengths and sperm aster organization: correlations between centrosome activity and developmental success.

This study describes a paternal effect on sperm aster size and microtubule organization during bovine fertilization. Immunocytochemistry using tubulin antibodies quantitated with confocal microscopy was used to measure the diameter of the sperm aster and assign a score (0-3) based on the degree of radial organization (0, least organized; 3, most organized). Three bulls (A-C) were chosen based on varying fertility (A, lowest fertility; C, highest fertility) as assessed by nonreturn to estrus after artificial insemination and in vitro embryonic development to the blastocyst stage. The results indicate a statistically significant bull-dependent difference in diameter of the sperm aster and in the organization of the sperm astral microtubules. Insemination from bull A resulted in an average sperm aster diameter of 101.4 microm (76.3% of oocyte diameter). This significantly differs (P < or = 0.0001) from the average sperm aster diameters produced after inseminations from bull B (78.2 microm; 60.8%) or bull C (77.9 microm; 57.8%), which themselves displayed no significant differences. The degree of radial organization of the sperm aster was also bull-dependent. Sperm asters organized by bull A-derived sperm had an average quality score of 1.8, which was higher than that of bull B (1.4; P < or = 0.0005) or bull C (1.2; P < or = 0.0001). Results with bulls B and C were also significantly different (P < or = 0.025). These results indicate that the paternally derived portion of the centrosome varies among males and that this variation affects male fertility, the outcome of early development, and, therefore, reproductive success.

Avaliação comparativa dos efeitos do anlodipino e da pimobendana na insuficiência valvar crônica de mitral em cães

A insuficiência valvar crônica de mitral (IVCM) é a principal cardiopatia de cães, correspondendo a 75-85% dos casos de cardiopatias. É causada pela degeneração mixomatosa da valva mitral (endocardiose de mitral) sendo, então, uma doença degenerativa adquirida e que pode ocasionar a insuficiência cardíaca congestiva (ICC). Pode acometer qualquer raça de cão, mas é mais frequentemente observada nas raças de pequeno porte, dentre as quais, Poodle miniatura, Spitz Alemão, Dachshund, Yorkshire Terrier, Chihuahua e Cavalier King Charles Spaniel. Na endocardiose de mitral, o volume sanguíneo regurgitado causa sobrecarga do lado esquerdo do coração, devido ao aumento das pressões atrial e ventricular esquerdas, seguida de dilatação e hipertrofia dessas cavidades cardíacas. A elevação da pressão ventricular esquerda pode causar hipertensão pulmonar, congestão e, em estágios avançados, edema pulmonar. A doença pode evoluir assintomática, enquanto que naqueles casos que evoluem para insuficiência cardíaca congestiva (ICC) os sintomas mais usuais são: tosse, intolerância ao exercício, dispneia e síncope. Em 2009 o colégio americano de medicina interna veterinária (American College of Veterinary Internal Medicine -ACVIM) elaborou diretrizes para o tratamento da IVCM, tendo por base a classificação funcional adaptada do American College of Cardiology. Neste trabalho foram utilizados os fármacos anlodipino e pimobendana em associação a outros usualmente indicados no tratamento da ICC em cães, segundo consenso de 2009, indicados no tratamento da ICC em cães. Dois grupos (A e B) de cães, cada um constituído por 10 pacientes com IVCM em estágio C, foram tratados com furosemida e maleato de enalapril, sendo que os animais do grupo A receberão pimobendana e os do grupo B, anlodipino. Os animais foram avaliados em diferentes momentos (T0, T30, T60) observando-se as alterações nos exames ecodopplercardiográfico e eletrocardiográfico, bem como de pressão arterial sistólica

Desenvolvimento de matrizes poliméricas como veículo de ácido ascórbico: caracterização e avaliação da estabilidade

A administração de princípios ativos pela mucosa oral é uma forma eficiente para a distribuição de fármacos e nutrientes, oferecendo diversas vantagens como uma fácil aplicação, evitando o metabolismo de primeira passagem hepática e potencialmente melhorando a biodisponibilidade dessas substâncias. A acerola e o camu-camu apresentam uma alta concentração de vitamina C e são consideradas fontes de diferentes compostos ativos, porém a vitamina C presente nas frutas é facilmente oxidada pelos fatores ambientais, e essas frutas são pouco acessíveis ao consumo populacional. Filmes de desintegração oral (FDO) podem apresentar rápido tempo de desintegração e fácil administração, o que os torna um material interessante para a veiculação de compostos com atividades farmacêuticas ou nutricionais. Assim, este trabalho teve como objetivo o desenvolvimento e caracterização de filmes de desintegração oral à base de amido e gelatina com adição de extrato seco de acerola e camu-camu produzidos por \"spray dryer\" como uma alternativa para a administração de vitamina C. Os FDOs foram produzidos pela técnica de casting, variando-se a proporção de amido e gelatina. Como plastificante foi utilizado o sorbitol (20 g / 100 g de polímero), mantendo-se constante a concentração de polímeros (2 g /100 g de solução filmogênica) e de extrato seco de acerola (4 g /100 g de solução filmogênica) e camu-camu (4 g / 100 g de solução filmogênica). Os extratos secos de acerola e camu-camu foram caracterizados com relação à concentração da vitamina C e da estabilidade desses extratos nessas condições (30 °C, UR 75 % e 40 °C, UR 75%). Os FDOs foram caracterizados em relação a espessura, propriedades mecânicas, ângulo de contato, FT-IR, microscopia electrônica de varredura, concentração de vitamina C, atividade antioxidante, atividade antimicrobiana, estabilidade da vitamina C, tempo de desintegração, estabilidade da atividade de eliminação de radicais de DPPH&bull;, avaliação sensorial. Os extratos secos apresentaram uma boa estabilidade em relação à vitamina C e aos compostos antioxidantes (sequestro do radical DPPH&bull;). Os FDOs sem adição de extrato, independente da formulação, mostraram-se homogêneos, com ausência de partículas insolúveis e alta capacidade de formação de filme. Para os FDOs com maior concentração de amido foi observado reduzido tempo de desintegração e pH próximo ao bucal. Após a adição dos extratos, os FDOs apresentaram redução do tempo de desintegração, boa aceitação sensorial, propriedades antioxidantes e estabilidade pelo sequestro do radical DPPH&bull;. O pH de superfície dos filmes com adição de extrato seco de acerola foi mais próximo ao bucal quando comparado com os filmes com camu-camu. No entanto, os FDOs com acerola apresentaram reduzida estabilidade da vitamina C em relação ao tempo de armazenamento, enquanto que os filmes com camu-camu apresentaram melhor estabilidade. De modo geral, na formulação produzida apenas com amido (100 g de amido / 100 g de polímeros) observou-se uma maior concentração da vitamina C no final da estabilidade realizada à 30 °C e umidade relativa de 75 %, elevada estabilidade dos compostos ativos (DPPH) e alta taxa de uniformidade na distribuição da vitamina C no filme de desintegração oral. Dessa forma, os FDOs podem ser considerados uma boa alternativa para a suplementação de vitamina C.

Brexit or not? Time for the EU to move. EPC Commentary, 8 September 2014

The deteriorating relationship between the United Kingdom (UK) and the rest of the EU, including the prospect of a referendum on EU membership, would have dominated the Union’s agenda had it not been for the economic/financial crisis, followed by the external crisis which we are now facing in the East. Precisely because of these crises, it is now time for the incoming European Commission to take the bull by the horns and ensure that the EU can move on from a potential referendum and its possible outcomes. The June European Council noted that “the UK raised some concerns related to the future development of the EU. These concerns will need to be addressed. In this context, the European Council noted that the concept of ever closer union allows for different paths of integration for different countries, allowing those that want to deepen integration to move ahead, while respecting the wish of those who do not want to deepen any further.” While the EU has, arguably, successfully developed at different speeds for decades, to address the UK’s (fundamental) concerns, it is now time to work out whether and how the UK can be accommodated, and what this would mean in practice. UK membership is desirable but not at any price, so the aim should be to keep the UK in, while also ensuring that the principles on which the EU is built are protected. There will need to be a modus operandi which enables the EU and in particular, the Eurozone, to continue to make progress in addressing the shortcomings of European integration and European Monetary Union (EMU) in particular, while at the same time offering a reform package that can satisfy the UK. This does not necessarily mean that all EMU reforms have to be within the EU framework: additional intergovernmental arrangements could also be a possibility. However, this could add to the complexity and inefficiency of the system, as well as sidelining the supranational element of EU governance which will be needed to make EMU function.

Initial characterization of stiff skin-like syndrome in West Highland white terriers

BACKGROUND Stiff skin syndrome and systemic or localized scleroderma are cutaneous disorders characterized by dermal fibrosis and present clinically with induration of the skin, with or without joint, internal organ or vascular involvement. OBJECTIVES To provide clinical, histological and preliminary genetic analysis of two West Highland white terrier siblings presenting with indurated skin resembling stiff skin syndrome in humans. ANIMALS Two client owned full sibling West Highland white terriers from two different litters. METHODS Clinical examination, histopathological examination and whole genome sequencing analysis of affected and unaffected West Highland white terriers. RESULTS Affected dogs exhibited markedly indurated skin that was attached firmly to the underlying tissue and incomplete closure of the mouth and eyes. No abnormalities were found by neurological or orthopaedic examination, radiographs of the head or whole body computed tomography. Histologically, the dermis and pannicular septa were thickened by a marked increase in coarse collagen fibres and a mild to moderate increase in collagen fibre diameter. The syndrome most likely follows an autosomal recessive mode of inheritance. The sequence analysis did not reveal any obvious causative variant in the investigated candidate genes ADAMTSL2 and FBN1. CONCLUSION AND CLINICAL IMPORTANCE The clinical phenotype and histopathological features of two West Highland white terrier siblings resembled stiff skin syndrome in humans. Unlike in humans, or previously described beagles with stiff skin, there was no restriction of joint mobility. Genetic analysis did not detect a candidate causative variant and warrants further research.