Characterization of in vivo vertebral growth modulation by shape memory alloy staples on a porcine model for the correction of the scoliosis

La recherche de nouvelles voies de correction de la scoliose idiopathique a une longue histoire. Le traitement conventionnel de la scoliose idiopathique est présenté par le port du corset ou par la correction opératoire de la déformation. Depuis leur introduction, les deux méthodes ont prouvé leur efficacité. Cependant, malgré des caractéristiques positives évidentes, ces méthodes peuvent causer un nombre important d'effets indésirables sur la santé du patient. Les techniques sans fusion pour le traitement de la scoliose semblent être une alternative perspective de traitement traditionnel, car ils apportent moins de risques et des complications chirurgicales que les méthodes conventionnelles avec la conservation de la mobilité du disque intravertébral. Cependant, l'utilisation de techniques mentionnées exige une connaissance profonde de la modulation de croissance vertébrale. L'objectif principal de la présente étude est d'estimer le potentiel d'agrafes à l’AMF de moduler la croissance des vertèbres porcines en mesurant la croissance osseuse sur la plaque de croissance de vertèbres instrumentées en comparaison avec le groupe contrôle. La méthode est basée sur la loi de Hueter-Volkmann. Nous avons choisi NiTi agrafes à l’AMF pour notre étude et les porcs de race Landrace comme un animal expérimental. Les agrafes ont été insérés sur 5 niveaux thoracique de T6 à T11. En outre, les radiographies ont été prises toutes les 2 semaines. La présence d'agrafes en alliage à mémoire de forme a produit la création de courbes scoliotiques significatives dans 4 de 6 animaux chargés et le ralentissement considérable de la croissance osseuse (jusqu'à 35,4%) comparativement aux groupes contrôle et sham. L'étude a démontré in vivo le potentiel d'agrafes en alliage à mémoire de formes de moduler la croissance des vertèbres en créant des courbes scoliotiques sur les radiographies et en ralentissant le taux de croissance sur les plaques de croissance instrumenté. La position précise de l'agrafe est essentielle pour la modulation de croissance osseuse et le développement de la scoliose expérimentale.

Anti-VEGFA therapy reduces tumor growth and extends survival in a murine model of ovarian granulosa cell tumor

Les tumeurs des cellules de la granulosa (GCTs) sont des tumeurs avec un potentiel malin ayant tendance à récidiver, provoquant ainsi la mort dans 80% des cas de stade avancé consécutif à une rechute. Bien que les GCTs représentent 5% des tumeurs ovariennes, peu d’études ont évalué les protocoles de traitement adjuvant pour la maladie avancée ou récurrente. Notre but était d’évaluer l’efficacité de la voie de signalisation du facteur de croissance de l’endothélium vasculaire A (VEGFA) comme cible pour le traitement de la GCT utilisant le modèle murin transgénique Ptentm1Hwu/tm1Hwu; Ctnnb1tm1Mmt/+; Amhr2tm3(cre)Bhr/+ (PCA) qui reproduit le stade avancé de la maladie humaine. Un anticorps anti-VEGFA a été administré une fois par semaine par voie intrapéritonéale (IP) à partir de 3 semaines d’âge. La thérapie anti-VEGFA a permis une réduction de la taille des tumeurs à 6 semaines d’âge (p<0.05) et une prolongation de la survie des animaux traités, lorsque comparé aux animaux contrôles. L’analyse des GCTs a montré une réduction significative de la prolifération cellulaire (p<0.05) et de la densité microvasculaire (p<0.01) mais aucune différence significative n’a été détectée dans l’apoptose cellulaire. p44/p42 MAPK, un effecteur de la signalisation pour le récepteur 2 de VEGFA (VEGFR2) associé à la prolifération cellulaire, était moins activé dans les tumeurs traitées (p<0.05). Par contre, l’activation d’AKT, un effecteur impliqué dans la survie cellulaire, était similaire d’un groupe à l’autre. Ces résultats suggèrent que l’anticorps anti-VEGFA réduit la prolifération cellulaire et la densité microvasculaire chez les souris PCA par inhibition de la voie de signalisation VEGFR2-MAPK, inhibant ainsi la croissance tumorale. En conclusion, l’efficacité de la thérapie anti- VEGFA mérite d’être évaluée en essais contrôlés randomisés pour le traitement des GCTs chez l’homme.

Urban Detection From Hyperspectral Images Using Dimension-Reduction Model and Fusion of Multiple Segmentations Based on Stuctural and Textural Features

Ce mémoire de maîtrise présente une nouvelle approche non supervisée pour détecter et segmenter les régions urbaines dans les images hyperspectrales. La méthode proposée n ́ecessite trois étapes. Tout d’abord, afin de réduire le coût calculatoire de notre algorithme, une image couleur du contenu spectral est estimée. A cette fin, une étape de réduction de dimensionalité non-linéaire, basée sur deux critères complémentaires mais contradictoires de bonne visualisation; à savoir la précision et le contraste, est réalisée pour l’affichage couleur de chaque image hyperspectrale. Ensuite, pour discriminer les régions urbaines des régions non urbaines, la seconde étape consiste à extraire quelques caractéristiques discriminantes (et complémentaires) sur cette image hyperspectrale couleur. A cette fin, nous avons extrait une série de paramètres discriminants pour décrire les caractéristiques d’une zone urbaine, principalement composée d’objets manufacturés de formes simples g ́eométriques et régulières. Nous avons utilisé des caractéristiques texturales basées sur les niveaux de gris, la magnitude du gradient ou des paramètres issus de la matrice de co-occurrence combinés avec des caractéristiques structurelles basées sur l’orientation locale du gradient de l’image et la détection locale de segments de droites. Afin de réduire encore la complexité de calcul de notre approche et éviter le problème de la ”malédiction de la dimensionnalité” quand on décide de regrouper des données de dimensions élevées, nous avons décidé de classifier individuellement, dans la dernière étape, chaque caractéristique texturale ou structurelle avec une simple procédure de K-moyennes et ensuite de combiner ces segmentations grossières, obtenues à faible coût, avec un modèle efficace de fusion de cartes de segmentations. Les expérimentations données dans ce rapport montrent que cette stratégie est efficace visuellement et se compare favorablement aux autres méthodes de détection et segmentation de zones urbaines à partir d’images hyperspectrales.

Performance of District Industries Centers in Kerala : An Application of augmented solow Model

This thesis "Entitled performance of district industries centres in kerala :An application of augmented solow model.The first chapter deals with evolution of approaches for promoting small scale production and the growth of small scale industries in india.the developing countries face the problems like sluggish growth capital shortages high levels of unemployment,enoromous rural-urban economic disparities regional inequalities increasing concentration of capital and chronic difficulities in the export sector.Review of literature and methodology of the study are presented in the second chapter. In the third chapter an attempt has been made to make an in-depth study of the emergence and growth of district of district industries centres.In the chapter four an attempt was made to study the organisational structure of DICs functions and responsibilities assigned to the functional managers and performance of the functionaries.

Development of an ArcGIS extension to model urban climate factors

The possibility to develop automatically running models which can capture some of the most important factors driving the urban climate would be very useful for many planning aspects. With the help of these modulated climate data, the creation of the typically used “Urban Climate Maps” (UCM) will be accelerated and facilitated. This work describes the development of a special ArcGIS software extension, along with two support databases to achieve this functionality. At the present time, lacking comparability between different UCMs and imprecise planning advices going along with the significant technical problems of manually creating conventional maps are central issues. Also inflexibility and static behaviour are reducing the maps’ practicality. From experi-ence, planning processes are formed more productively, namely to implant new planning parameters directly via the existing work surface to map the impact of the data change immediately, if pos-sible. In addition to the direct climate figures, information of other planning areas (like regional characteristics / developments etc.) have to be taken into account to create the UCM as well. Taking all these requirements into consideration, an automated calculation process of urban climate impact parameters will serve to increase the creation of homogenous UCMs efficiently.

Transport impact of in urban planning: the case of Transmilenio in Bogota

The growth and expansion of cities during the last century can’t be seen without taking into account the important role they have assumed in the transport infrastructure. In Bogota have passed trough streetcar, buses and automóviles was deciding for the city, because all this periods marked a drastic change in growth morphology. This article studies the planning of Mass Transit System –MTS– Transmilenio and its interaction with the urban structure, in light of the current city planning framework. It also specifies the behavior of land use in the construction of the system first phase. One of the most important findings of this study is that there is no articulation between land and transport use system, despite the decisions taken in the ordering model. Similarly, local and intermediate planning exhibits Peak articulation.The existing infrastructure of the MTS reiterates the tendency to concentrate the accessibility in one place: the center has the largest accessibility whereas periphery fails to overcome its limitations of accessibility. While the city continued with this trend the existence of a coordinated planning system for Bogota and the ability to meet expectations of planning model is questionable, however it is something that depends not only on MTS.

A knowledge based model of regional growth. 'Un modelo basado en el conocimiento del crecimiento regional'.

Resumen tomado de la publicación

Numerical model of solid phase transformations governed by nucleation and growth: microstructure development during isothermal crystallization

A simple numerical model which calculates the kinetics of crystallization involving randomly distributed nucleation and isotropic growth is presented. The model can be applied to different thermal histories and no restrictions are imposed on the time and the temperature dependences of the nucleation and growth rates. We also develop an algorithm which evaluates the corresponding emerging grain-size distribution. The algorithm is easy to implement and particularly flexible, making it possible to simulate several experimental conditions. Its simplicity and minimal computer requirements allow high accuracy for two- and three-dimensional growth simulations. The algorithm is applied to explore the grain morphology development during isothermal treatments for several nucleation regimes. In particular, thermal nucleation, preexisting nuclei, and the combination of both nucleation mechanisms are analyzed. For the first two cases, the universal grain-size distribution is obtained. The high accuracy of the model is stated from its comparison to analytical predictions. Finally, the validity of the Kolmogorov-Johnson-Mehl-Avrami model SSSR, is verified for all the cases studied

Integrated management of urban wastewater systems: a model-based approach

The main objective pursued in this thesis targets the development and systematization of a methodology that allows addressing management problems in the dynamic operation of Urban Wastewater Systems. The proposed methodology will suggest operational strategies that can improve the overall performance of the system under certain problematic situations through a model-based approach. The proposed methodology has three main steps: The first step includes the characterization and modeling of the case-study, the definition of scenarios, the evaluation criteria and the operational settings that can be manipulated to improve the system’s performance. In the second step, Monte Carlo simulations are launched to evaluate how the system performs for a wide range of operational settings combinations, and a global sensitivity analysis is conducted to rank the most influential operational settings. Finally, the third step consists on a screening methodology applying a multi-criteria analysis to select the best combinations of operational settings.

Identifying the critical parameters of a cyanobacterial growth and movement model by using generalised sensitivity analysis

Bloom-forming and toxin-producing cyanobacteria remain a persistent nuisance across the world. Modelling of cyanobacteria in freshwaters is an important tool for understanding their population dynamics and predicting the location and timing of the bloom events in lakes and rivers. A new deterministic-mathematical model was developed, which simulates the growth and movement of cyanobacterial blooms in river systems. The model focuses on the mathematical description of the bloom formation, vertical migration and lateral transport of colonies within river environments by taking into account the major factors that affect the cyanobacterial bloom formation in rivers including, light, nutrients and temperature. A technique called generalised sensitivity analysis was applied to the model to identify the critical parameter uncertainties in the model and investigates the interaction between the chosen parameters of the model. The result of the analysis suggested that 8 out of 12 parameters were significant in obtaining the observed cyanobacterial behaviour in a simulation. It was found that there was a high degree of correlation between the half-saturation rate constants used in the model.

Assessing the discourses and practices of urban regeneration in a growing region

Most research on the discourses and practices of urban regeneration in-the UK has examined case studies located in areas of relative socio-economic distress. Less research has been undertaken on regeneration projects and agendas in areas characterise by strong economic growth. Yet, it is in such places that some of the best examples of the discourses, practices and impacts of contemporary urban regeneration can be. found. In some areas of high demand regeneration projects have used inner urban brownfield sites as locations for new investment. With the New Labour government's urban policy agendas targeting similar forms of regeneration, an examination of completed or on-going schemes is timely and relevant to debates over the direction that policy should take. This paper, drawing on a study of urban regeneration in one of England's, fastest growing towns, Reading in Berkshire, examines the discourses, practices and impacts of redevelopment schemes during the 1990s and 2000s. Reading's experiences have received national attention and have been hailed as a model for other urban areas to follow. The research documents the discursive and concrete aspects of local regeneration and examines the ways in which specific priorities and defined problems have come to dominate agendas. Collectively, the study argues that market-driven objectives come to dominate regeneration agendas, even in areas of strong demand where development agencies wield a relatively high degree of influence. Such regeneration plays a symbolic and practical role in creating new forms of exclusion and interpretations of place. (C) 2003 Elsevier Science Ltd. All rights reserved.

Initial results from Phase 2 of the international urban energy balance model comparison

Urban land surface schemes have been developed to model the distinct features of the urban surface and the associated energy exchange processes. These models have been developed for a range of purposes and make different assumptions related to the inclusion and representation of the relevant processes. Here, the first results of Phase 2 from an international comparison project to evaluate 32 urban land surface schemes are presented. This is the first large-scale systematic evaluation of these models. In four stages, participants were given increasingly detailed information about an urban site for which urban fluxes were directly observed. At each stage, each group returned their models' calculated surface energy balance fluxes. Wide variations are evident in the performance of the models for individual fluxes. No individual model performs best for all fluxes. Providing additional information about the surface generally results in better performance. However, there is clear evidence that poor choice of parameter values can cause a large drop in performance for models that otherwise perform well. As many models do not perform well across all fluxes, there is need for caution in their application, and users should be aware of the implications for applications and decision making.

Percentile growth charts for biomedical studies using a porcine model

Increasing rates of obesity and heart disease are compromising quality of life for a growing number of people. There is much research linking adult disease with the growth and development both in utero and during the first year of life. The pig is an ideal model for studying the origins of developmental programming. The objective of this paper was to construct percentile growth curves for the pig for use in biomedical studies. The body weight (BIN) of pigs was recorded from birth to 150 days of age and their crown-to-rump length was measured over the neonatal period to enable the ponderal index (Pl; kg/m(3)) to be calculated. Data were normalised and percentile curves were constructed using Cole's lambda-mu-sigma (LMS) method for BW and PI. The construction of these percentile charts for use in biomedical research will allow a more detailed and precise tracking of growth and development of individual pigs under experimental conditions.