966 resultados para Bark beetles
Resumo:
The objectives of this study were to evaluate the effects of rooting media (vermiculite, carbonized rice bark, fenolic spume and sand), presence of IBA (indole-3-butyric acid) and presence of fertilization during the rooting of rose (Rosa sp.) leafy cuttings, Dalas cultivar. This investigation was carried out in Jaboticabal (Sao Paulo State - Brazil) during the period of March to April 1997. The experimental design was a randomized block in a factorial arrangement. It consisted of 16 treatments (the 4 rooting media combined with IBA concentrated solutions - 0 and 1.000 ppm and fertilizer - 0 and commercial product with macro and micronutrients, applied weekly) with 3 replicates. The evaluations were 30 days after cuttings showed that the best rooting percentage occurs in sand (98%), followed by vermiculite (90%) and fenolic spume (87%) and cuttings treated with IBA (95%), while the fertilization showed no promoting effects. The number of cuttings roots wasn't affected with rooting media or DBA treatment, while the fertilization showed effective.
Resumo:
The mitotic and meiotic chromosomes of the beetles Epicauta atomaria (Meloidae) and Palembus dermestoides (Tenebrionidae) were analysed using standard staining, C-banding and silver impregnation techniques. We determine the diploid and haploid chromosome numbers, the sex determination system and describe the chromosomal morphology, the C-banding pattern and the chromosome(s) bearing NORs (nucleolar organizer regions). Both species shown 2n = 20 chromosomes, the chromosomal meioformula 9 + Xyp, and regular chromosome segregation during anaphases I and II. The chromosomes of E. atomaria are basically metacentric or submetacentric and P. dermestoides chromosomes are submetacentric or subtelocentric. In both beetles the constitutive heterochromatin is located in the pericentromeric region in all autosomes and in the Xp chromosome; additional C-bands were observed in telomeric region of the short arm in some autosomes in P. dermestoides. The yp chromosome did not show typical C-bands in these species. As for the synaptonemal complex, the nucleolar material is associated to the 7th bivalent in E. atomaria and 3rd and 7th bivalents in P. dermestoides. Strong silver impregnated material was observed in association with Xyp in light and electron microscopy preparations in these species and this material was interpreted to be related to nucleolar material.
Resumo:
Dendrobium nobile orchids were grown for three years in different substrates (tree fern fiber, blocks of pressed coconut bark, bark of Eucalyptus grandis, mixtures with coconut bark blocks and eucalyptus bark and mixtures with the latter materials and charcoal. Plant growth increased with higher concentrations of S (up to 1.6 g/kg), Cu (up to 46 mg/kg) and Zn (up to 147 mg/kg), and decreased with higher concentrations of Ca (up to 13.2 g/kg), Mg (up to 6.6 g/kg) and B (up to 19 mg/kg). High Mo (up to 5.3 mg/kg) caused a more intense loss of leaves after planting. Relations between nutrient concentrations also affected plant growth. With exception of eucalyptus bark, all growing media under study were suitable for plant growth.
Resumo:
Molecular markers have recently been incorporated into genetic improvement programs. They are already considered as powerful tools with several different uses, for instance the monitoring of genetic variability in tree populations. The main objectives of this study were to evaluate genetic variability in Eucalyptus urophylla progenies and together with silvicultural and botanical information, provide assistance to the improvement program. The Eucalypts population is located at the Experimental Forestry Sciences Station, Anhembi, SP, which belongs to the College of Agriculture Luiz de Queiroz. Sixty-nine progenies were analysed representing one individual by family in open pollinated Eucalyptus urophylla trees. The RAPD technique allowed the identification of 72 loci that were analysed using Jaccard's Coefficient generating a genetic similarity matrix to permit estimation of genetic distances. The results obtained showed genetic distance between individuals of 0.40 with 12 groups of genetic variability using a standardised distance of 40%. The progenies showed different bark patterns, allowing the establishment of bark groups. The groups formed based on genetic distances obtained using DNA analysis did not correspond to those based on bark pattern. Genetic selection was simulated in which silvicultural and genetic variability data were linked, thus avoiding excessive variability losses. The simulation of controlled crossings allowed the maximum genetic difference to be obtained linked with height and individual bark roughness.
Resumo:
The termite problem in eucalyptus forest plantations in Brazil has been registered since 1908. The main termite pests can be separated in four groups: a) seedling/sapling termites; b) heartwood termites; c) bark termites and d) wood termites. The termites in the first group attack root and stalk bases of young eucalyptus plants. The most common species are Syntermes spp. and Cornitermes spp. and they are a serious obstacle to early eucalyptus developing. The heartwood termites attack formed trees destroying eucalyptus heartwood. Coptotermes testaceus is the most cited species in reports, but more species probably occur. Plant mortality caused by seedling/sapling termites vary of 10-70 %. There are not effective control methods to heartwood termites. The main seedling/sapling termite control strategy is the chemical barrier around root systems of plants. Nowadays, studies are being carried out to determine monitoring systems to termite infestations. Early results indicate that proportionally, few areas really need insecticide application, due to spatial distribution of termites to be aggregated. Therefore, it is necessary to develope techniques rationalizing insecticide utilization in eucalyptus plantations, to keep production systems feasible and to be suitable for environmental exigencies.
Resumo:
A survey was conducted aiming to recognize and characterize the environments of occurrence of Trichilia species and their geographic distribuition, particulary T. catigua A. Juss, in Santa Catarina State. These informations will support a domestication strategy for agricultural production of this spcies. This species is widely used by traditional communities as dye and tonic beverage, as well as digestive and purgative. Some pharmaceutical and beverage industries in Brasil use bark of this species to prepare a tonic drink. There are several common names reffering the species and this situation can promove mistakes in collecting and selling processes. Termperature, soil, vegetational types and edaphoclimatic aspects have great influence on the occurrence of this species. Plant collection strategu was based on herbaria data and field verification. The vouchers were deposited at the Federal University of Parana herbarium (UPCB). The collection sites were geographically located, by latitude and longitude and these data were crossed with climate, soil, temperature, rainfall, altitude and vegetation maps. Catuaba occurs predominantly on a stational semidecidual forest and also on transitional forest with Araucaria and part of Atlantic forest. It is found growing in lower canopy, with fertile soils, and high content of organic matter. The main geomorphological formation are basaltic and the soil types vary from dark red latossol to yellow red latossol, including structured red latossl and cambissol from basaltic and granitic origin.
Resumo:
Recognizing the great potential of this residue to increase the eucalyptus forests produtivity - when used in its humidified form - the main objective of this project was to decompose the solid residues generated at Luiz Antonio mill, in a fast and artificial way, by means of piles or ridges of composted materials. The materials used in this composting process were: activated sludge, dregs and grits, wood ash and biomass. Applications of both phosphorus and potassium have been used during the planting phase. Nitrogen, in the form of urea, has been applied in two treatments with the main purpose to decrease the C/N ratio and to speed up the decomposition process. The experiment was carried out in 120 days. The best results were obtained in residue piles with a 3:1 ratio, i.e., 75% residues + 25% biomass. This mixture provided an extremely good aeration, thus enabling an appropriate material mixing and homogenization. Under the technological viewpoint, the results obtained from the composting process were quite satisfactory for VCP industrial residues treatment. This composting process enabled a material accelerated stabilization (lower C/N ratio) and homogenization. After this experiment, it became possible to use all residues just as they were generated by Luiz Antônio pulp and paper mill. This project is of the utmost relevance to VCP's forestry department as far as a significant amount of nutrients is getting back to the soil in the form of mineral and organic materials.
Resumo:
To find the regions having a major influence on the bioluminescence spectra of railroad worm luciferases, we constructed new chimeric luciferases switching the fragments from residues 1-219 and from 220-545 between Phrixotrix viviani (PxvGR; λmax = 548 nm) green light-emitting luciferase and Phrixothrix hirtus (PxhRE; λmax = 623 nm) red light-emitting luciferases. The emission spectrum (λmax = 571 nm) and KM for luciferin in the chimera PxRE220GR (1-219, PxhRE; 220-545, PxvGR) suggested that the region above residue 220 of PxvGR had a major effect on the active site. However, switching the sequence between the residues 226-344 from PxvGR luciferase into PxhRE (PxREGRRE) luciferase resulted in red light emission (λmax = 603 nm), indicating that the region 220-344 by itself does not determine the emission spectrum. Furthermore, the sequence before residue 220 of the green-emitting luciferase is incompatible for light emission with the sequence above residue 220 of PxhRE. These results suggest that the fragments before and after residue 220, which correspond to distinct subdomains, may fold differently in the green- and red-emitting luciferases, affecting the active site conformation.
Resumo:
Dimorphandra mollis is a characteristic plant from Brazilian saP vanna-like vegetation. The pollen of this species could be toxic to bees and the objective of the present investigation was to study the toxicity of methanolic extracts obtained from the flowers, peduncles and stem bark of D. mollis to Apis mellifera workers. For the study, the extracts were incorporated into the diet of the bees for later evaluation of mortality rates. The substances isolated: neoisoastilbin, catechin, astilbin and tannins were tested on adult workers and only catechin did not cause toxic effects. The data obtained in the toxicity bioassays were analyzed statistically by Log Rank test and all methanolic extracts showed significant (p<0.0001) toxic effects. Astilbin is also the major component of pollen grains, and is probably responsible for honeybee mortality during blooming periods.
Resumo:
Guazuma ulmifolia Lam., Sterculiaceae, popularly known as mutamba, has a wide geographical distribution, ranging from Mexico to Southern Brazil. The interest in its chemical properties is due to its popular use for hair loss treatment. This activity can be attributed to tannins that have many pharmacological activities such anti-inflammatory, anti-ulcerogenic, anti-microbial, anti-viral, capillary protective action and radical scavenging properties. In the microscopic analysis of barks and leaves, large secretor ducts could be detected among the parenchyma cells, as well as star shaped trichoms on the epidermis. One of the aims of the anatomical study was to detect tissues with polyphenolic compounds. The results indicated two tissues rich in these compounds: the phloematic region and the periderm. Chemical analyses were carried out on the bark and showed the presence of the following chemical groups: flavonoids, tannins, saponins and mucilages.
Mensuração do comprimento das fibras para a determinação da madeira juvenil em Eucalyptus citriodora
Resumo:
The juvenile wood has peculiar characteristics from the anatomical structure and physical-mechanical properties, considering these aspects the knowledge of the wood is essential for wood adequate utilization. The aim of this work was to determinate the zone of juvenile wood of pith-bark direction in Eucalyptus citriodora. The juvenile and mature wood zones were determined across fiber length measurement in various height in the tree stem. Results showed that juvenile wood zone occurs approximately up to the 45 at 55 mm from the pith.
Resumo:
Analysis of variance and covariance was preformed on growth traits (stem girth, bark thickness, total height gain and rubber yield) of 22 open-pollinated progenies of the rubber tree Hevea brasiliensis from an Asian Hevea collection introduced to Agronomic Institute (Instituto Agronômico, Campinas, São Paulo, Brazil; IAC) in 1952. This progeny trial was replicated at three sites in São Paulo state and it was found that at three years from sowing there was statistically significant variation for girth, bark thickness, height and rubber yield. An individual test sites, values of individual plant heritability for girth ranged from ĥ i 2 = 0.36 to ĥ i 2 = 0.89 whereas values for heritability for progeny means ranged from ĥ i 2 = 0.77 to ĥ i 2 = 0.87. These moderate and high heritabilities suggest that a combination of progeny and within-progeny selection would be effective at increasing girth in this population at individual sites. Across sites, values of individual-plant heritability for girth ranged from ĥ i 2 = 0.36 to ĥ i 2 = 0.47, whereas values for heritability of progeny means girth ranged from ĥ x̄ 2 = 0.77 to ĥ x̄ 2 = 0.87. There were high positive genetic correlations between increased girth and bark thickness suggesting that breeding aimed at increasing girth would also increase bark thickness and possibly height. Copyright by the Brazilian Society of Genetics.
Resumo:
The present paper deals with estimation of variance components, prediction of breeding values and selection in a population of rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell.-Arg.] from Rio Branco, State of Acre, Brazil. The REML/BLUP (restricted maximum likelihood/best linear unbiased prediction) procedure was applied. For this purpose, 37 rubber tree families were obtained and assessed in a randomized complete block design, with three unbalanced replications. The field trial was carried out at the Experimental Station of UNESP, located in Selvíria, State of Mato Grosso do Sul, Brazil. The quantitative traits evaluated were: girth (G), bark thickness (BT), number of latex vessel rings (NR), and plant height (PH). Given the unbalanced condition of the progeny test, the REML/BLUP procedure was used for estimation. The narrow-sense individual heritability estimates were 0.43 for G, 0.18 for BT, 0.01 for NR, and 0.51 for PH. Two selection strategies were adopted: one short-term (ST - selection intensity of 8.85%) and the other long-term (LT - selection intensity of 26.56%). For G, the estimated genetic gains in relation to the population average were 26.80% and 17.94%, respectively, according to the ST and LT strategies. The effective population sizes were 22.35 and 46.03, respectively. The LT and ST strategies maintained 45.80% and 28.24%, respectively, of the original genetic diversity represented in the progeny test. So, it can be inferred that this population has potential for both breeding and ex situ genetic conservation as a supplier of genetic material for advanced rubber tree breeding programs. Copyright by the Brazilian Society of Genetics.
Resumo:
Luciferyl adenylate, the key intermediate in beetle bioluminescence, is produced through adenylation of D-luciferin by beetle luciferases and also by mealworm luciferase-like enzymes which produce a weak red chemiluminescence. However, luciferyl adenylate is only weakly chemiluminescent in water at physiological pH and it is unclear how efficient bioluminescence evolved from its weak chemiluminescent properties. We found that bovine serum albumin (BSA) and neutral detergents enhance luciferyl adenylate chemiluminescence by three orders of magnitude, simulating the mealworm luciferase-like enzyme chemiluminescence properties. These results suggest that the beetle protoluciferase activity arose as an enhanced luciferyl adenylate chemiluminescence in the protein environment of the ancestral AMP-ligase. The predominance of luciferyl adenylate chemiluminescence in the red region under most conditions suggests that red luminescence is a more primitive condition that characterized the original stages of protobioluminescence, whereas yellow-green bioluminescence may have evolved later through the development of a more structured and hydrophobic active site. Copyright © 2006 John Wiley & Sons, Ltd.
Resumo:
This study evaluated the Eucalyptus grandis drying defects acting on boards diametrical position and on log steaming. Half of the logs, with diameter from 20 to <25, 25 to <30 and 30 to <35cm, were steamed during 20 hours at 90°C of temperature. Subsequently, the logs (control and steamed) were sawn. The boards were dried in the dry-kiln pilot and the resulting defects from the drying process were measured. The results indicate that: (1) the boards coming from control logs presented different magnitude defects in function of the diametrical position. The split and spring to increase in direction to pith, the bow to increase in direction to bark and cupping were bigger in intermediary boards; (2) the boards coming from steamed logs presented a reduction from drying defects in function of logs diameter and its more homogeneous index in the pith-bark direction.