London and its environs in the nineteenth century : illustrated by a series of views from original drawings /

Sequel to Shepherd's Metropolitan Improvements. See Adams.

Scotland (part I) : Edinburgh, Glasgow and the Highlands as far north as Aberdeen, Inverness, Gairloch, and Stornoway : with a description of the various approaches by land and sea from the south /

Advertising matter: 48 p. at end.

A Dialogue between Treatment Integrity Research and Design-Based Implementation Research

Thesis (Master's)--University of Washington, 2016-06

State Social Safety Net Programs and the Great Recession: The First Line of Defense and the Last Resort for the Economically Disadvantaged

Thesis (Ph.D.)--University of Washington, 2016-06

Optimally distributed actuator placement and control for a slewing single-link flexible manipulator

A method is proposed for determining the optimal placement and controller design for multiple distributed actuators to reduce the vibrations of flexible structures. In particular, application of piezoceramic patches to a horizontally-slewing single-link flexible manipulator modeled using the assumed modes method is investigated. The optimization method uses simulated annealing and allows placement of any number of distributed actuators of unequal length, although piezoceramics of fixed equal lengths are used in the example. It also designs an linear-quadratic-regulator controller as part of the optimization procedure. The measures of performance used in the investigation to determine optimality are the total mass of the system and the time integral of the absolute value of the hub and tip position error. This study also varies the relative weightings for each of these performance measures to observe the effects on the controller designs and piezoceramic patch positions in the optimized solutions.

Sexual abuse and suicidality: gender differences in a large community sample of adolescents

Objective: A cross-sectional study of gender specific relationships between self-reported child sexual abuse and suicidality in a community sample of adolescents. Method: Students aged 14 years on average (N = 2,485) from 27 schools in South Australia completed a questionnaire including items on sexual abuse and suicidality, and measures of depression (Centre for Epidemiological Studies Depression Scale), hopelessness (Beck Hopelessness Scale), and family functioning (McMaster Family Assessment Device General Functioning Subscale). Data analysis included logistic regression. Results: In boys, self-report sexual abuse is strongly and independently associated with suicidal thoughts, plans, threats, deliberate self-injury, and suicide attempts, after controlling for current levels of depression, hopelessness, and family dysfunction. In girls, the relationship between sexual abuse and suicidality is mediated fully by depression, hopelessness, and family dysfunction. Girls who report current high distress about sexual abuse, however, have a threefold increased risk of suicidal thoughts and plans, compared to non-abused girls. Boys who report current high distress about sexual abuse have 10-fold increased risk for suicidal plans and threats, and 15-fold increased risk for suicide attempts, compared to non-abused boys. Fifty-five percent (n = 15) of sexually abused boys attempted suicide versus 29% (n = 17) girls. Conclusions: A history of sexual abuse should alert clinicians, professionals and caters in contact with adolescents, to greatly increased risks of suicidal behavior and attempts in boys, even in the absence of depression and hopelessness. Distress following sexual abuse, along with depression and hopelessness indicate increased risk of suicidal behavior in girls, as well as boys. (C) 2004 Published by Elsevier Ltd.

Winding patterns for biplanar MRI shim coils with rectangular and circular target-field regions

A method is presented for calculating the winding patterns required to design independent zonal and tesseral biplanar shim coils for magnetic resonance imaging. Streamline, target-field, Fourier integral and Fourier series methods are utilized. For both Fourier-based methods, the desired target field is specified on the surface of the conducting plates. For the Fourier series method it is possible to specify the target field at additional depths interior to the two conducting plates. The conducting plates are confined symmetrically in the xy plane with dimensions 2a x 2b, and are separated by 2d in the z direction. The specification of the target field is symmetric for the Fourier integral method, but can be over some asymmetric portion pa < x < qa and sb < y < tb of the coil dimensions (-1 < p < q < 1 and -1 < s < t < 1) for the Fourier series method. Arbitrary functions are used in the outer sections to ensure continuity of the magnetic field across the entire coil face. For the Fourier series case, the entire field is periodically extended as double half-range sine or cosine series. The resultant Fourier coefficients are substituted into the Fourier series and integral expressions for the internal and external magnetic fields, and stream functions on both the conducting surfaces. A contour plot of the stream function directly gives the required coil winding patterns. Spherical harmonic analysis of field calculations from a ZX shim coil indicates that example designs and theory are well matched.

Early practical experience and the social responsiveness of clinical education: Systematic review

Objectives To find how early experience in clinical and community settings (early experience) affects medical education, and identify strengths and limitations of the available evidence. Design A systematic review rating, by consensus, the strength and importance of outcomes reported in the decade 1992-2001. Data sources Bibliographical databases and journals were searched for publications on the topic, reviewed under the auspices of the recently formed Best Evidence Medical Education (BEME) collaboration. Selection of studies All empirical studies (verifiable, observational data) were included, whatever their design, method, or language of publication. Results Early experience was most commonly provided in community settings, aiming to recruit primary care practitioners for underserved populations. It increased the popularity of primary care residencies, albeit among self selected students. It fostered self awareness and empathic attitudes towards ill people, boosted students' confidence, motivated them, gave them satisfaction, and helped them develop a professional identity. By helping develop interpersonal skills, it made entering clerkships a less stressful experience. Early experience helped students learn about professional roles and responsibilities, healthcare systems, and health needs of a population. It made biomedical, behavioural, and social sciences more relevant and easier to learn. It motivated and rewarded teachers and patients and enriched curriculums. In some countries,junior students provided preventive health care directly to underserved populations. Conclusion Early experience helps medical students learn, helps them develop appropriate attitudes towards their studies and future practice, and orientates medical curriculums towards society's needs. Experimental evidence of its benefit is unlikely to be forthcoming and yet more medical schools are likely to provide it. Effort could usefully be concentrated on evaluating the methods and outcomes of early experience provided within non-experimental research designs, and using that evaluation to improve the quality of curriculums.

Robust stability of sequential multi-input multi-output quantitative feedback theory designs

This paper re-examines the stability of multi-input multi-output (MIMO) control systems designed using sequential MIMO quantitative feedback theory (QFT). In order to establish the results, recursive design equations for the SISO equivalent plants employed in a sequential MIMO QFT design are established. The equations apply to sequential MIMO QFT designs in both the direct plant domain, which employs the elements of plant in the design, and the inverse plant domain, which employs the elements of the plant inverse in the design. Stability theorems that employ necessary and sufficient conditions for robust closed-loop internal stability are developed for sequential MIMO QFT designs in both domains. The theorems and design equations facilitate less conservative designs and improved design transparency.

Existence of complementary pairs of proportionally balanced designs

Proportionally balanced designs (pi BDs) were introduced by Gray and Matters in response to a need for the allocation of markers of the Queensland Core Skills Test to have a certain property. Subsequent papers extended the theoretical results relating to such designs and provided further instances and general constructions. This work focused on designs comprising blocks of precisely two sizes, and when each variety occurs with one of precisely two possible frequencies. Two designs based on the set V of varieties are complementary if, whenever B is a block of one, then its complement with regard to the set V is a block of the other. Here we present necessary conditions for the existence of complementary pairs of such pi BDs and provide lists of some restricted parameter sets satisfying these necessary conditions. The lists are arranged according to the number of blocks. We demonstrate that not all of these parameter sets give rise to designs. However we establish by construction of the sets of blocks that, for every feasible number of blocks less than or equal to 100, with the possible exception of 63, there exists at least one pair of complementary pi BDs. We also investigate the conditions under which the complementary design can be isomorphic to the original design, and again provide a list of feasible parameters for pairs of such designs with at most 400 blocks.

A Comparison of Methodologies from Two Longitudinal Community-Based Randomized Controlled Trials of Similar Interventions in Palliative Care: What Worked and What Did Not

Background: Methodological challenges such as recruitment problems and participant burden make clinical trials in palliative care difficult. In 2001-2004, two community-based randomized controlled trials (RCTs) of case conferences in palliative care settings were independently conducted in Australia-the Queensland Case Conferences trial (QCC) and the Palliative Care Trial (PCT). Design: A structured comparative study of the QCC and PCT was conducted, organized by known practical and organizational barriers to clinical trials in palliative care. Results: Differences in funding dictated study designs and recruitment success; PCT had 6 times the budget of QCC. Sample size attainment. Only PCT achieved the sample size goal. QCC focused on reducing attrition through gatekeeping while PCT maximized participation through detailed recruitment strategies and planned for significant attrition. Testing sustainable interventions. QCC achieved a higher percentage of planned case conferences; the QCC strategy required minimal extra work for clinicians while PCT superimposed conferences on normal work schedules. Minimizing participant burden. Differing strategies of data collection were implemented to reduce participant burden. QCC had short survey instruments. PCT incorporated all data collection into normal clinical nursing encounters. Other. Both studies had acceptable withdrawal rates. Intention-to-treat analyses are planned. Both studies included substudies to validate new outcome measures. Conclusions: Health service interventions in palliative care can be studied using RCTs. Detailed comparative information of strategies, successes and challenges can inform the design of future trials. Key lessons include adequate funding, recruitment focus, sustainable interventions, and mechanisms to minimize participant burden.

Integrated project evaluation and selection using multiple-attribute decision-making technique

The evaluation and selection of industrial projects before investment decision is customarily done using marketing, technical and financial information. Subsequently, environmental impact assessment and social impact assessment are carried out mainly to satisfy the statutory agencies. Because of stricter environment regulations in developed and developing countries, quite often impact assessment suggests alternate sites, technologies, designs, and implementation methods as mitigating measures. This causes considerable delay to complete project feasibility analysis and selection as complete analysis requires to be taken up again and again till the statutory regulatory authority approves the project. Moreover, project analysis through above process often results sub-optimal project as financial analysis may eliminate better options, as more environment friendly alternative will always be cost intensive. In this circumstance, this study proposes a decision support system, which analyses projects with respect to market, technicalities, and social and environmental impact in an integrated framework using analytic hierarchy process, a multiple-attribute decision-making technique. This not only reduces duration of project evaluation and selection, but also helps select optimal project for the organization for sustainable development. The entire methodology has been applied to a cross-country oil pipeline project in India and its effectiveness has been demonstrated. © 2005 Elsevier B.V. All rights reserved.

Rural road accident investigation and prevention in Iran

The objectives are to examine rural road accident data in order to develop a method by which high accident rate locations and accident causes can be identified, and also to develop proposals for improvements at such locations and to identify measures which will improve road safety throughout the country. The problem of road safety in Iran is an important issue, because of the tragic and unnecessary loss of life, and the enormous cost of accidents in the country. The resources available to deal with the problems are limited and must be allocated on priority basis. This study represents an initial effort to identify the extent of the problem in order to take remedial measures. A study was made of all the available road accident data collected by agencies related to road safety in Iran, and the major organisations responsible for road safety development were visited. The Vice Minister of Roads and Transportation selected for this study a 280 Km rural road in South West Iran. Mainly because of the lack of suitable maps and plans of the roads, it was not possible to accurately identify the location of accidents. Accident scene data was subsequently collected by the highway police and personally by the author. The data for the study road was then analysed to identify 'high accident rate' locations, and also to determine, as far as was possible, the reasons for the accidents. The study suggests specific improvements for each of the high accident rate locations examined (eg. the building of dual carriageways with central guard rails to reduce the risk of collision with oncoming vehicles, pedestrian facilities to allow pedestrians to cross dangerous roadsl]. In addition recommendations are made to guide and assist the major organisations responsible for road safety in Iran. These recommendations are: (al for improving accident data collection and storage (bl for subsequent analysis for taking remedial measures with a view to accident prevention

Design and evaluation for the future of m-interaction

Mobile technology has been one of the major growth areas in computing over recent years (Urbaczewski, Valacich, & Jessup, 2003). Mobile devices are becoming increasingly diverse and are continuing to shrink in size and weight. Although this increases the portability of such devices, their usability tends to suffer. Fuelled almost entirely by lack of usability, users report high levels of frustration regarding interaction with mobile technologies (Venkatesh, Ramesh, & Massey, 2003). This will only worsen if interaction design for mobile technologies does not continue to receive increasing research attention. For the commercial benefit of mobility and mobile commerce (m-commerce) to be fully realized, users’ interaction experiences with mobile technology cannot be negative. To ensure this, it is imperative that we design the right types of mobile interaction (m-interaction); an important prerequisite for this is ensuring that users’ experience meets both their sensory and functional needs (Venkatesh, Ramesh, & Massey, 2003). Given the resource disparity between mobile and desktop technologies, successful electronic commerce (e-commerce) interface design and evaluation does not necessarily equate to successful m-commerce design and evaluation. It is, therefore, imperative that the specific needs of m-commerce are addressed–both in terms of design and evaluation. This chapter begins by exploring the complexities of designing interaction for mobile technology, highlighting the effect of context on the use of such technology. It then goes on to discuss how interaction design for mobile devices might evolve, introducing alternative interaction modalities that are likely to affect that future evolution. It is impossible, within a single chapter, to consider each and every potential mechanism for interacting with mobile technologies; to provide a forward-looking flavor of what might be possible, this chapter focuses on some more novel methods of interaction and does not, therefore, look at the typical keyboard and visual display-based interaction which, in essence, stem from the desktop interaction design paradigm. Finally, this chapter touches on issues associated with effective evaluation of m-interaction and mobile application designs. By highlighting some of the issues and possibilities for novel m-interaction design and evaluation, we hope that future designers will be encouraged to “think out of the box” in terms of their designs and evaluation strategies.