Analysis of Global Compliance and Implementation of the Goals of International Environmental Treaties: A Case study of the Convention on Biodiversity (CBD)

The Convention on Biodiversity (CBD) was created in 1992 to coordinate global governments to protect biological resources. The CBD has three goals: protection of biodiversity, achievement of sustainable use of biodiversity and facilitation of equitable sharing of the benefits of biological resources. The goal of protecting biological resources has remained both controversial and difficult to implement. This study focused more on the goal of biodiversity protection. The research was designed to examine how globally constructed environmental policies get adapted by national governments and then passed down to local levels where actual implementation takes place. Effectiveness of such policies depends on the extent of actual implementation at local levels. Therefore, compliance was divided and examined at three levels: global, national and local. The study then developed various criteria to measure compliance at these levels. Both qualitative and quantitative methods were used to analyze compliance and implementation. The study was guided by three questions broadly examining critical factors that most influence the implementation of biodiversity protection policies at the global, national and local levels. Findings show that despite an overall biodiversity deficit of 0.9 hectares per person, global compliance with the CBD goals is currently at 35%. Compliance is lowest at local levels at 14%, it is slightly better at national level at 50%, and much better at the international level 64%. Compliance appears higher at both national and international levels because compliance here is paper work based and policy formulation. If implementation at local levels continues to produce this low compliance, overall conservation outcomes can only get worse than what it is at present. There are numerous weaknesses and capacity challenges countries are yet to address in their plans. In order to increase local level compliance, the study recommends a set of robust policies that build local capacity, incentivize local resource owners, and implement biodiversity protection programs that are akin to local needs and aspirations.

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

É ensinando que se aprende: um estudo sobre o ensino de projeto no Curso de Arquitetura e Urbanismo da Universidade Federal do Rio Grande do Norte (CAU UFRN)

You cannot teach architectonic design, but only learn it. This sentence was, during some decades, especially during the modernism, the starting point, adopted by several architectonic design professors, when they had to approach their subject. An attitude that, some years ago, was reviewed and fighted by area s experts. This paper join this criticism, and try to add something to the pre-existing discussion, analyzing with the case-study method all the subjects related with architectonic design of the Architecture and Urbanism degree, at Universidade Federal do Rio Grande do Norte CAU/UFRN . The aim is to identify and analyze the teaching methodologies used by the professors and their effects related to the students. To reach this purpose four different methods were used: i) Professors interviews; ii) Different forms submitted to students and professors; iii) Daily practice s observation, developed during classes; iv) Documents analysis about the degree (historical development and subjects) and about the subjects themselves (summaries, table of contents and planning). Studying the results, it was possible to underline that, in spite of the efforts of some of the professors to find a way to teach with more appropriate educational and pedagogic bases, some of the teaching methodologies, criticized in articles dealing with the matter, were still used. With regard to these, the research pointed out some suggestions that could help to improve the teaching and learning process, joining professors and students that are the most important subjects of the teaching activity. Developing the idea living in the paper s title Teaching and learning , it s now clear that only the practice, through the improvement of the pedagogic techniques, together with critical analysis can help the professors to reach a relationship level, regarding the teaching and learning process, as that described in the epigraph s text, into which teaching and learning, can t be done only by one of the process subject, but must be lived by both of them: professors and students

Bibliotecas digitais em Arquitetura e urbanismo: um estudo sobre a arquitetura da informação digital

The goal of this paper was to search the state of the art from the Digital Libraries in Architecture and Urbanism in the Higher Education Institutions (IES) through conceptualizations and showing the importance of Digital Libraries in the disclosure and easing of information transferring. Questions about digital information architecture, usability, digital preservation and accessibility were approached. The research was made in the websites of Brazilian Universities, firstly to identify the institutions which offered the Architecture and Urbanism course, focusing on postgraduate education. After identifying the offering, the research was done by analyzing the contents, storage and dissemination and access to information, these libraries. It was found that the digital libraries are increasingly and taking part of organizations and educational institutions focusing on the knowledge dissemination releasing digitally information that may be needed for institution or the individual. A monitoring was done over of the physical and computational restructuring of the Board of Studies and Research in Architecture and Urbanism (Câmara de Estudos e Pesquisa em Arquitetura e Urbanismo, CEPAU), from the Architecture and Urbanism Course of the Federal University of Rio Grande do Norte (UFRN), showing the need of installing a Digital Library to integrate the databases of PPGAU s research groups, which today remain independent, with no interface among themselves. The research chosen area was Architecture and Urbanism, because there is a gap and little documentation about digital libraries in this area

Sensibilização e adaptação às alterações climáticas

As alterações climáticas impuseram modificações significativas na estrutura e dinâmica natural dos ecossistemas costeiros comprometendo as suas capacidades de resiliência cujos limites têm sido ultrapassados. A falta de políticas integradas de gestão territorial e adaptação às alterações climáticas intensificaram os riscos e vulnerabilidades sócio- ambientais em muitos espaços costeiros. Este trabalho foi realizado no município de Luanda onde a erosão, as inundações e os movimentos de massa são uma realidade cada vez mais preocupante. A metodologia de investigação para este trabalho contou com as consultas aos decisores políticos, população e ONGs presididas por inquéritos por questionário e entrevistas semi-estruturadas com primado para os aspectos qualitativos. As principais fontes de consulta foram as institucionais e os repositórios científicos de diversas universidades assim como a recolha bibliográfica. Os resultados obtidos apontam claramente para a falta de participação activa dos munícipes em processos de formação e tomada de iniciativas em sede de políticas ambientais, a gestão insustentável da zona costeira, o baixo grau de percepção ambiental e a falta de articulação integrada das instituições quanto ao ambiente.

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

É ensinando que se aprende: um estudo sobre o ensino de projeto no Curso de Arquitetura e Urbanismo da Universidade Federal do Rio Grande do Norte (CAU UFRN)

You cannot teach architectonic design, but only learn it. This sentence was, during some decades, especially during the modernism, the starting point, adopted by several architectonic design professors, when they had to approach their subject. An attitude that, some years ago, was reviewed and fighted by area s experts. This paper join this criticism, and try to add something to the pre-existing discussion, analyzing with the case-study method all the subjects related with architectonic design of the Architecture and Urbanism degree, at Universidade Federal do Rio Grande do Norte CAU/UFRN . The aim is to identify and analyze the teaching methodologies used by the professors and their effects related to the students. To reach this purpose four different methods were used: i) Professors interviews; ii) Different forms submitted to students and professors; iii) Daily practice s observation, developed during classes; iv) Documents analysis about the degree (historical development and subjects) and about the subjects themselves (summaries, table of contents and planning). Studying the results, it was possible to underline that, in spite of the efforts of some of the professors to find a way to teach with more appropriate educational and pedagogic bases, some of the teaching methodologies, criticized in articles dealing with the matter, were still used. With regard to these, the research pointed out some suggestions that could help to improve the teaching and learning process, joining professors and students that are the most important subjects of the teaching activity. Developing the idea living in the paper s title Teaching and learning , it s now clear that only the practice, through the improvement of the pedagogic techniques, together with critical analysis can help the professors to reach a relationship level, regarding the teaching and learning process, as that described in the epigraph s text, into which teaching and learning, can t be done only by one of the process subject, but must be lived by both of them: professors and students

A simple approach to integrate the ecotoxicological and chemical data for the establishment of environmental risk levels

O presente trabalho utilizou métodos multivariados e matemáticos para integrar dados químicos e ecotoxicológicos obtidos para o Sistema Estuarino de Santos e para a região próxima à zona de lançamento do emissário submarino de Santos, com a finalidade de estabelecer com maior exatidão os riscos ambientais, e assim identificar áreas prioritárias e orientar programas de controle e políticas públicas. Para ambos os conjuntos de dados, as violações de valores numéricos de qualidade de sedimento tenderam a estar associadas com a ocorrência de toxicidade. Para o estuário, essa tendência foi corroborada pelas correlações entre a toxicidade e as concentrações de HPAs e Cu, enquanto para a região do emissário, pela correlação entre toxicidade e conteúdo de mercúrio no sedimento. Valores normalizados em relação às medias foram calculados para cada amostra, permitindo classificá-las de acordo com a toxicidade e a contaminação. As análises de agrupamento confirmaram os resultados das classificações. Para os dados de sistema estuarino, houve a separação das amostras em três categorias: as estações SSV-2, SSV-3 e SSV-4 encontram-se sob maior risco, seguidas da estação SSV-6. As estações SSV-1 e SSV-5 demonstraram melhores condições. Já em relação ao emissário, as amostras 1 e 2 apresentaram melhores condições, enquanto a estação 5 pareceu apresentar um maior risco, seguida das estações 3 e 4 que tiveram apenas alguns indícios de alteração.

Bibliotecas digitais em Arquitetura e urbanismo: um estudo sobre a arquitetura da informação digital

The goal of this paper was to search the state of the art from the Digital Libraries in Architecture and Urbanism in the Higher Education Institutions (IES) through conceptualizations and showing the importance of Digital Libraries in the disclosure and easing of information transferring. Questions about digital information architecture, usability, digital preservation and accessibility were approached. The research was made in the websites of Brazilian Universities, firstly to identify the institutions which offered the Architecture and Urbanism course, focusing on postgraduate education. After identifying the offering, the research was done by analyzing the contents, storage and dissemination and access to information, these libraries. It was found that the digital libraries are increasingly and taking part of organizations and educational institutions focusing on the knowledge dissemination releasing digitally information that may be needed for institution or the individual. A monitoring was done over of the physical and computational restructuring of the Board of Studies and Research in Architecture and Urbanism (Câmara de Estudos e Pesquisa em Arquitetura e Urbanismo, CEPAU), from the Architecture and Urbanism Course of the Federal University of Rio Grande do Norte (UFRN), showing the need of installing a Digital Library to integrate the databases of PPGAU s research groups, which today remain independent, with no interface among themselves. The research chosen area was Architecture and Urbanism, because there is a gap and little documentation about digital libraries in this area

Comparison of molecular markers to detect fresh sewage in environmental waters

Human-specific Bacteroides HF183 (HS-HF183), human-specific Enterococci faecium esp (HS-esp), human-specific adenoviruses (HS-AVs) and human-specific polyomaviruses (HS-PVs) assays were evaluated in freshwater, seawater and distilled water to detect fresh sewage. The sewage spiked water samples were also tested for the concentrations of traditional fecal indicators (i.e., Escherichia coli, enterococci and Clostridium perfringens) and enteric viruses such as enteroviruses (EVs), sapoviruses (SVs), and torquetenoviruses (TVs). The overall host-specificity of the HS-HF183 marker to differentiate between humans and other animals was 98%. However, the HS-esp, HS-AVs and HS-PVs showed 100% hostspecificity. All the human-specific markers showed >97% sensitivity to detect human fecal pollution. E. coli, enterococci and, C. perfringens were detected up to dilutions of sewage 10_5, 10_4 and 10_3 respectively.HS-esp, HS-AVs, HS-PVs, SVs and TVs were detected up to dilution of sewage 10_4 whilst EVs were detected up to dilution 10_5. The ability of the HS-HF183 marker to detect freshsewagewas3–4 orders ofmagnitude higher than that of the HS-esp and viral markers. The ability to detect fresh sewage in freshwater, seawater and distilled water matrices was similar for human-specific bacterial and viral marker. Based on our data, it appears that human-specific molecular markers are sensitive measures of fresh sewage pollution, and the HS-HF183 marker appears to be the most sensitive among these markers in terms of detecting fresh sewage. However, the presence of the HS-HF183 marker in environmental waters may not necessarily indicate the presence of enteric viruses due to their high abundance in sewage compared to enteric viruses. More research is required on the persistency of these markers in environmental water samples in relation to traditional fecal indicators and enteric pathogens.

Evaluation of multiple sewage-associated bacteroides PCR markers for sewage pollution tracking

The host specificity of the five published sewage-associated Bacteroides markers (i.e., HF183, BacHum, HuBac, BacH and Human-Bac) was evaluated in Southeast Queensland, Australia by testing fecal DNA samples (n = 186) from 11 animal species including human fecal samples collected via influent to a sewage treatment plant (STP). All human fecal samples (n = 50) were positive for all five markers indicating 100% sensitivity of these markers. The overall specificity of the HF183 markers to differentiate between humans and animals was 99%. The specificities of the BacHum and BacH markers were > 94%, suggesting that these markers are suitable for sewage pollution in environmental waters in Australia. The BacHum (i.e., 63% specificity) and Human-Bac (i.e., 79% specificity) markers performed poorly in distinguishing between the sources of human and animal fecal samples. It is recommended that the specificity of the sewage-associated markers must be rigorously tested prior to its application to identify the sources of fecal pollution in environmental waters.

Microbial risk from rainwater tanks in South East Queensland

Quantitative Microbial Risk Assessment (QMRA) analysis was used to quantify the risk of infection associated with the exposure to pathogens from potable and non-potable uses of roof-harvested rainwater in South East Queensland (SEQ). A total of 84 rainwater samples were analysed for the presence of faecal indicators (using culture based methods) and zoonotic bacterial and protozoan pathogens using binary and quantitative PCR (qPCR). The concentrations of Salmonella invA, and Giardia lamblia β-giradin genes ranged from 65-380 genomic units/1000 mL and 9-57 genomic units/1000 mL of water, respectively. After converting gene copies to cell/cyst number, the risk of infection from G. lamblia and Salmonella spp. associated with the use of rainwater for bi-weekly garden hosing was calculated to be below the threshold value of 1 extra infection per 10,000 persons per year. However, the estimated risk of infection from drinking the rainwater daily was 44-250 (for G. lamblia) and 85-520 (for Salmonella spp.) infections per 10,000 persons per year. Since this health risk seems higher than that expected from the reported incidences of gastroenteritis, the assumptions used to estimate these infection risks are critically discussed. Nevertheless, it would seem prudent to disinfect rainwater for potable use.

Pollutant characteristics on roof surfaces for evaluation as a stormwater harvesting catchment

This paper presents the outcomes of a study which focused on evaluating roof surfaces as stormwater harvesting catchments. Build-up and wash-off samples were collected from model roof surfaces. The collected build-up samples were separated into five different particle size ranges prior to the analysis of physico-chemical parameters. Study outcomes showed that roof surfaces are efficient catchment surfaces for the deposition of fine particles which travel over long distances. Roof surfaces contribute relatively high pollutant loads to the runoff and hence significantly influence the quality of the harvested rainwater. Pollutants associated with solids build-up on roof surfaces can vary with time, even with minimal changes to total solids load and particle size distribution. It is postulated that this variability is due to changes in distant atmospheric pollutant sources and wind patterns. The study highlighted the requirement for first flush devices to divert the highly polluted initial portion of roof runoff. Furthermore, it is highly recommended to not to harvest runoff from small intensity rainfall events since there is a high possibility that the runoff would contain a significant amount of pollutants even after the initial runoff fraction.

Port of Brisbane stormwater quality : stage 2 development of a port specific water quality model

Background: The quality of stormwater runoff from ports is significant as it can be an important source of pollution to the marine environment. This is also a significant issue for the Port of Brisbane as it is located in an area of high environmental values. Therefore, it is imperative to develop an in-depth understanding of stormwater runoff quality to ensure that appropriate strategies are in place for quality improvement, where necessary. To this end, the Port of Brisbane Corporation aimed to develop a port specific stormwater model for the Fisherman Islands facility. The need has to be considered in the context of the proposed future developments of the Port area. ----------------- The Project: The research project is an outcome of the collaborative Partnership between the Port of Brisbane Corporation (POBC) and Queensland University of Technology (QUT). A key feature of this Partnership is that it seeks to undertake research to assist the Port in strengthening the environmental custodianship of the Port area through ‘cutting edge’ research and its translation into practical application. ------------------ The project was separated into two stages. The first stage developed a quantitative understanding of the generation potential of pollutant loads in the existing land uses. This knowledge was then used as input for the stormwater quality model developed in the subsequent stage. The aim is to expand this model across the yet to be developed port expansion area. This is in order to predict pollutant loads associated with stormwater flows from this area with the longer term objective of contributing to the development of ecological risk mitigation strategies for future expansion scenarios. ----------------- Study approach: Stage 1 of the overall study confirmed that Port land uses are unique in terms of the anthropogenic activities occurring on them. This uniqueness in land use results in distinctive stormwater quality characteristics different to other conventional urban land uses. Therefore, it was not scientifically valid to consider the Port as belonging to a single land use category or to consider as being similar to any typical urban land use. The approach adopted in this study was very different to conventional modelling studies where modelling parameters are developed using calibration. The field investigations undertaken in Stage 1 of the overall study helped to create fundamental knowledge on pollutant build-up and wash-off in different Port land uses. This knowledge was then used in computer modelling so that the specific characteristics of pollutant build-up and wash-off can be replicated. This meant that no calibration processes were involved due to the use of measured parameters for build-up and wash-off. ---------------- Conclusions: Stage 2 of the study was primarily undertaken using the SWMM stormwater quality model. It is a physically based model which replicates natural processes as closely as possible. The time step used and catchment variability considered was adequate to accommodate the temporal and spatial variability of input parameters and the parameters used in the modelling reflect the true nature of rainfall-runoff and pollutant processes to the best of currently available knowledge. In this study, the initial loss values adopted for the impervious surfaces are relatively high compared to values noted in research literature. However, given the scientifically valid approach used for the field investigations, it is appropriate to adopt the initial losses derived from this study for future modelling of Port land uses. The relatively high initial losses will reduce the runoff volume generated as well as the frequency of runoff events significantly. Apart from initial losses, most of the other parameters used in SWMM modelling are generic to most modelling studies. Development of parameters for MUSIC model source nodes was one of the primary objectives of this study. MUSIC, uses the mean and standard deviation of pollutant parameters based on a normal distribution. However, based on the values generated in this study, the variation of Event Mean Concentrations (EMCs) for Port land uses within the given investigation period does not fit a normal distribution. This is possibly due to the fact that only one specific location was considered, namely the Port of Brisbane unlike in the case of the MUSIC model where a range of areas with different geographic and climatic conditions were investigated. Consequently, the assumptions used in MUSIC are not totally applicable for the analysis of water quality in Port land uses. Therefore, in using the parameters included in this report for MUSIC modelling, it is important to note that it may result in under or over estimations of annual pollutant loads. It is recommended that the annual pollutant load values given in the report should be used as a guide to assess the accuracy of the modelling outcomes. A step by step guide for using the knowledge generated from this study for MUSIC modelling is given in Table 4.6. ------------------ Recommendations: The following recommendations are provided to further strengthen the cutting edge nature of the work undertaken: * It is important to further validate the approach recommended for stormwater quality modelling at the Port. Validation will require data collection in relation to rainfall, runoff and water quality from the selected Port land uses. Additionally, the recommended modelling approach could be applied to a soon-to-be-developed area to assess ‘before’ and ‘after’ scenarios. * In the modelling study, TSS was adopted as the surrogate parameter for other pollutants. This approach was based on other urban water quality research undertaken at QUT. The validity of this approach should be further assessed for Port land uses. * The adoption of TSS as a surrogate parameter for other pollutants and the confirmation that the <150 m particle size range was predominant in suspended solids for pollutant wash-off gives rise to a number of important considerations. The ability of the existing structural stormwater mitigation measures to remove the <150 m particle size range need to be assessed. The feasibility of introducing source control measures as opposed to end-of-pipe measures for stormwater quality improvement may also need to be considered.