Affectation de composantes basée sur des contraintes énergétiques dans une architecture multiprocesseurs en trois dimensions

La lithographie et la loi de Moore ont permis des avancées extraordinaires dans la fabrication des circuits intégrés. De nos jours, plusieurs systèmes très complexes peuvent être embarqués sur la même puce électronique. Les contraintes de développement de ces systèmes sont tellement grandes qu’une bonne planification dès le début de leur cycle de développement est incontournable. Ainsi, la planification de la gestion énergétique au début du cycle de développement est devenue une phase importante dans la conception de ces systèmes. Pendant plusieurs années, l’idée était de réduire la consommation énergétique en ajoutant un mécanisme physique une fois le circuit créé, comme par exemple un dissipateur de chaleur. La stratégie actuelle est d’intégrer les contraintes énergétiques dès les premières phases de la conception des circuits. Il est donc essentiel de bien connaître la dissipation d’énergie avant l’intégration des composantes dans une architecture d’un système multiprocesseurs de façon à ce que chaque composante puisse fonctionner efficacement dans les limites de ses contraintes thermiques. Lorsqu’une composante fonctionne, elle consomme de l’énergie électrique qui est transformée en dégagement de chaleur. Le but de ce mémoire est de trouver une affectation efficace des composantes dans une architecture de multiprocesseurs en trois dimensions en tenant compte des limites des facteurs thermiques de ce système.

Le corps ambivalent dans l'exposition «En imparfaite santé : la médicalisation de l'architecture» (2011-2012)

Le progrès scientifique et technologique n'est pas sans faille – les conséquences imprévues de son application peuvent causer de nouveaux problèmes. Tel est le constat machiavélien sur lequel est fondé le projet En imparfaite santé : la médicalisation de l'architecture du Centre Canadien d'Architecture (2011-2012), présenté sous forme d'exposition et de catalogue. Ce mémoire étudie comment les deux plateformes, la première étant expérientielle et la seconde théorique, formulent une critique du processus de la médicalisation actuelle, lequel est entré dans le champ de l'architecture contemporaine. L’exposition est approchée comme discours et comme installation d’objets pour un public; une attention particulière est alors portée à la scénographie et au parcours du visiteur. D’autres réflexions ont pour objet le graphisme, un outil soutenant le leitmotiv de confrontation. Dans l’étude du catalogue, l’accent est mis sur l’essai d’introduction, qui est implicitement traversé par le concept fondamentalement ambivalent de pharmakon. Le péritexte, l’encadrement physique du contenu principal de l’ouvrage, est aussi examiné. Ensuite, l’analyse comparative propose que chaque plateforme véhicule un propos différent, une stratégie rendue possible par l’ambivalence de la notion de corps, entendue littéralement et métaphoriquement. La conclusion finale du mémoire esquisse une courte proposition de contextualisation, autant de cette dualité que de la remise en question de l’autorité du discours techno-scientifique. Bien qu’En imparfaite santé dirige sa critique envers la persistance de la vision moderniste de l'architecture, nous avançons que le projet concerne tout autant, sinon plus, l'omniprésence actuelle du numérique. Ce dernier, à l’instar de l’architecture moderne, ne modifie pas seulement la conception du corps humain et architectural, il renforce également une croyance positiviste dans la technologie qui n'est pas toujours contrebalancée par la pensée critique.

Projets et utopies au Québec : Les années 1960 et 1970 : entre sculpture et architecture

Depuis la publication de l’Utopia de Thomas More au XVIe siècle, la notion d’utopie s’est vue appropriée par différents domaines d’expression artistique. Bien vite, l’architecture et l’urbanisme en font leur apanage lorsqu’il est question de concilier, en des dessins et des plans, des sociétés idéalisées et leurs représentations. La modernité et les nouvelles technologies modifient les modalités de l’utopie qui tend alors vers l’actualisation de ses modèles en des projets construits. Le XXe siècle est aussi marqué par une abondance de formes et d’idées dont la transmission et le partage sont accélérés par la création de nouveaux médias. Si les années 1960 et 1970 sont le lieu d’émergence de formes expérimentales et de projets utopiques, notamment alimentés par la Révolution tranquille et Mai 68, il est encore difficile au Québec de retracer ces projets en arts et en architecture puisqu’ils sont peu documentés. Par l’étude de la pratique artistique d’Yvette Bisson (1926-), de Robert Roussil (1925-2013) et de Melvin Charney (1935-2012), ce mémoire propose d’observer les différentes tactiques d’appropriation de l’espace auxquelles s’apparentent les modalités de la sculpture de ces trois artistes. Par l’intermédiaire de Michel de Certeau, Henri Lefebvre et Louis Marin, nous chercherons à expliquer quelle est la teneur critique des imaginaires mis en œuvre par les trois artistes pour créer de nouveaux lieux utopiques de la sculpture.

Inversion comique ou critique satirique ? La vue du Capitole de Hieronymus Cock (1562)

Hieronymus Cock's view of the Capitoline Hill, published in 1562 series on Roman ruins, has long been considered a useful document by historians of art and architecture for the key historical and topographical information it contains on one of Rome's most celebrated sites during the Renaissance. Beyond its documentary nature, which, as will appear, was essentially rhetorical, the view also offers much information as to how a mid sixteenth-century Flemish artist might perceive Rome's illustrious topography and celebrated ancient statuary. In other words, Cock's engraving enables us to put into practice what may be called an "archaeology of the gaze". Through previously unnoticed details, Cock invents a comical - verging on the satirical - vision of the antique sculptures proudly displayed on the famous piazza. Such an ironical reversal of Italian classical dignity is typical of the attitude of some contemporary Flemish artists, such as Pieter Brueghel, who was then close to Cock, and exposes the ambivalent position of some Northern European artists towards the classical tradition and Italian art theory. Finally, the analysis of other engravings of ruins by Hieronymus Cock where two emblematic characters - the draftsman and the 'kakker' (the one who defecates) - appear side by side, sheds light on the origin and possible significance of these comical and subversive details.

Effect of Polymer Architecture on the Structural and Biophysical Properties of PEG-PLA Nanoparticles

Polymers made of poly(ethylene glycol) chains grafted to poly(lactic acid) chains (PEG-g-PLA) were used to produce stealth drug nanocarriers. A library of comb-like PEG-g-PLA polymers with different PEG grafting densities was prepared in order to obtain nanocarriers with dense PEG brushes at their surface, stability in suspension, and resistance to protein adsorption. The structural properties of nanoparticles (NPs) produced from these polymers by a surfactant-free method were assessed by DLS, zeta potential, and TEM and were found to be controlled by the amount of PEG present in the polymers. A critical transition from a solid NP structure to a soft particle with either a “micelle-like” or “polymer nano-aggregate” structure was observed when the PEG content was between 15 to 25% w/w. This structural transition was found to have a profound impact on the size of the NPs, their surface charge, their stability in suspension in presence of salts as well as on the binding of proteins to the surface of the NPs. The arrangement of the PEG-g-PLA chains at the surface of the NPs was investigated by 1H NMR and X-ray photoelectron spectroscopy (XPS). NMR results confirmed that the PEG chains were mostly segregated at the NP surface. Moreover, XPS and quantitative NMR allowed quantifying the PEG chain coverage density at the surface of the solid NPs. Concordance of the results between the two methods was found to be remarkable. Physical-chemical properties of the NPs such as resistance to aggregation in saline environment as well as anti-fouling efficacy were related to the PEG surface density and ultimately to polymer architecture. Resistance to protein adsorption was assessed by isothermal titration calorimetry (ITC) using lysozyme. The results indicate a correlation between PEG surface coverage and level of protein interactions. The results obtained lead us to propose such PEG-g-PLA polymers for nanomedecine development as an alternative to the predominant polyester-PEG diblock polymers.

Effect of polymer architecture on Curcumin 1 encapsulation and release from PEGylated polymer nanoparticles: toward a drug delivery nano-platform to the CNS

We developed a nanoparticles (NPs) library from poly(ethylene glycol)–poly lactic acid comb-like polymers with variable amount of PEG. Curcumin was encapsulated in the NPs with a view to develop a delivery platform to treat diseases involving oxidative stress affecting the CNS. We observed a sharp decrease in size between 15 and 20% w/w of PEG which corresponds to a transition from a large solid particle structure to a “micelle-like” or “polymer nano-aggregate” structure. Drug loading, loading efficacy and release kinetics were determined. The diffusion coefficients of curcumin in NPs were determined using a mathematical modeling. The higher diffusion was observed for solid particles compared to “polymer nano-aggregate” particles. NPs did not present any significant toxicity when tested in vitro on a neuronal cell line. Moreover, the ability of NPs carrying curcumin to prevent oxidative stress was evidenced and linked to polymer architecture and NPs organization. Our study showed the intimate relationship between the polymer architecture and the biophysical properties of the resulting NPs and sheds light on new approaches to design efficient NP-based drug carriers.

Indian Mathematics Related to Architecture and Other Areas With Special Reference to Kerala

Department of Mathematics, Cochin University of Science and Technology

An Error-Localization, Validation and Optimization Tool for Embedded Code Augmentation: an Architecture Oriented Approach

Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.This dissertation contributes to an architecture oriented code validation, error localization and optimization technique assisting the embedded system designer in software debugging, to make it more effective at early detection of software bugs that are otherwise hard to detect, using the static analysis of machine codes. The focus of this work is to develop methods that automatically localize faults as well as optimize the code and thus improve the debugging process as well as quality of the code.Validation is done with the help of rules of inferences formulated for the target processor. The rules govern the occurrence of illegitimate/out of place instructions and code sequences for executing the computational and integrated peripheral functions. The stipulated rules are encoded in propositional logic formulae and their compliance is tested individually in all possible execution paths of the application programs. An incorrect sequence of machine code pattern is identified using slicing techniques on the control flow graph generated from the machine code.An algorithm to assist the compiler to eliminate the redundant bank switching codes and decide on optimum data allocation to banked memory resulting in minimum number of bank switching codes in embedded system software is proposed. A relation matrix and a state transition diagram formed for the active memory bank state transition corresponding to each bank selection instruction is used for the detection of redundant codes. Instances of code redundancy based on the stipulated rules for the target processor are identified.This validation and optimization tool can be integrated to the system development environment. It is a novel approach independent of compiler/assembler, applicable to a wide range of processors once appropriate rules are formulated. Program states are identified mainly with machine code pattern, which drastically reduces the state space creation contributing to an improved state-of-the-art model checking. Though the technique described is general, the implementation is architecture oriented, and hence the feasibility study is conducted on PIC16F87X microcontrollers. The proposed tool will be very useful in steering novices towards correct use of difficult microcontroller features in developing embedded systems.

A Generic Software Architecture for a Domain Specific Distributed Embedded System

In this paper, we have evolved a generic software architecture for a domain specific distributed embedded system. The system under consideration belongs to the Command, Control and Communication systems domain. The systems in such domain have very long operational lifetime. The quality attributes of these systems are equally important as the functional requirements. The main guiding principle followed in this paper for evolving the software architecture has been functional independence of the modules. The quality attributes considered most important for the system are maintainability and modifiability. Architectural styles best suited for the functionally independent modules are proposed with focus on these quality attributes. The software architecture for the system is envisioned as a collection of architecture styles of the functionally independent modules identified

A Hybrid Architecture for Recognising Speech Signals in Malayalam

Speech is the primary, most prominent and convenient means of communication in audible language. Through speech, people can express their thoughts, feelings or perceptions by the articulation of words. Human speech is a complex signal which is non stationary in nature. It consists of immensely rich information about the words spoken, accent, attitude of the speaker, expression, intention, sex, emotion as well as style. The main objective of Automatic Speech Recognition (ASR) is to identify whatever people speak by means of computer algorithms. This enables people to communicate with a computer in a natural spoken language. Automatic recognition of speech by machines has been one of the most exciting, significant and challenging areas of research in the field of signal processing over the past five to six decades. Despite the developments and intensive research done in this area, the performance of ASR is still lower than that of speech recognition by humans and is yet to achieve a completely reliable performance level. The main objective of this thesis is to develop an efficient speech recognition system for recognising speaker independent isolated words in Malayalam.

Architecture and other Architectures: Mapping the Production of Insular Space in the Pearl River Delta (China) and Jakarta (Indonesia)

Globalization is widely regarded as the rise of the borderless world. However in practice, true globalization points rather to a “spatial logic” by which globalization is manifested locally in the shape of insular space. Globalization in this sense is not merely about the creation of physical fragmentation of space but also the creation of social disintegration. This study tries to proof that global processes also create various forms of insular space leading also to specific social implications. In order to examine the problem this study looks at two cases: China’s Pearl River Delta (PRD) and Jakarta in Indonesia. The PRD case reveals three forms of insular space namely the modular, concealed and the hierarchical. The modular points to the form of enclosed factories where workers are vulnerable for human-right violations due to the absent of public control. The concealed refers to the production of insular space by subtle discrimination against certain social groups in urban space. And the hierarchical points to a production of insular space that is formed by an imbalanced population flow. The Jakarta case attempts to show more types of insularity in relation to the complexity of a mega-city which is shaped by a culture of exclusion. Those are dormant and hollow insularity. The dormant refers to the genesis of insular– radical – community from a culture of resistance. The last type, the hollow, points to the process of making a “pseudo community” where sense of community is not really developed as well as weak social relationship with its surrounding. Although global process creates various expressions of territorial insularization, however, this study finds that the “line of flight” is always present, where the border of insularity is crossed. The PRD’s produces vernacular modernization done by peasants which is less likely to be controlled by the politics of insularization. In Jakarta, the culture of insularization causes urban informalities that have no space, neither spatially nor socially; hence their state of ephemerality continues as a tactic of place-making. This study argues that these crossings possess the potential for reconciling venue to defuse the power of insularity.

Agricultural, architectural and archaeological evidence for the role and ecological adaptation of a scattered mountain oasis in Oman

The recent discovery of the monumental 5000 years old tower tombs on top of the up to 1850 m high Shir plateau has raised numerous questions about the economic and infrastructural basis of the agro-pastoral-piscicultural society which likely has constructed them. The scattered oasis settlement of Maqta, situated just below the towers in a rugged desert environment has therefore been studied from 2001 to 2003 to understand its prehistoric and present role along the ancient trade route which connected the inner-Omani Sharqiya across the southern Hajar mountains with the ocean port of Tiwi. Maqta consists of a central area with 59 buildings and 12 scattered temporary settlements comprising a total of about 200 semi-nomadic inhabitants and next to 900 sheep and goats. The 22 small springs with a flow rate between 5 and 1212-l h^-1 are watering 16 terrace systems totaling 4.5 ha of which 2.9 ha are planted to date palms (Phoenix dactylifera L.), 0.4 ha to wheat landraces (Triticum durum and Triticum aestivum) during the cooler winter months, 0.4 are left fallow and 0.8 h are abandoned. During a pronounced drought period from 2001 to 2003, the springs’ flow rate declined between 38% and 72%. Most of the recent buildings of the central housing area were found empty or used as temporary stores by the agro-pastoral population watching their flocks on the surrounding dry mountains. There is no indication that there ever was a settlement older than the present one. A number of Hafit (3100–2700 BC) and Umm an-Nar (2700–2000 BC) tombs just above the central housing area and further along one of the trade routes to the coast are the only indication of an old pastoral landuse in Maqta territory where oasis agriculture may have entered only well after 1000 AD. With this little evidence of existence during the 3rd millennium BC, Maqta is unlikely to have played any major role favouring the construction of the nearby monumental Shir tower tombs other than providing water for herders and their flocks, early migrant traders or tower tomb constructors.

Bacterial ecology of ancient Saharan salt-enrichment ponds at Teguidda-n-Tessoumt

Little is known about the bacterial ecology of evaporative salt-mining sites (salterns) of which Teguidda-n-Tessoumt at the fringe of the West-African Saharan desert in Niger is a spectacular example with its many-centuries-old and very colorful evaporation ponds. During the different enrichment steps of the salt produced as a widely traded feed supplement for cattle, animal manure is added to the crude brine, which is then desiccated and repeatedly crystallized. This study describes the dominant Bacteria and Archaea communites in the brine from the evaporation ponds and the soil from the mine, which were determined by PCR-DGGE of 16S rDNA. Correspondence analysis of the DGGE-community fingerprints revealed a change in community structure of the brine samples during the sequential evaporation steps which was, however, unaffected by the brine's pH and electric conductivity (EC). The Archaea community was dominated by a phylogenetically diverse group of methanogens, while the Bacteria community was dominated by gamma proteobacteria. Microorganisms contained in the purified salt product have the potential to be broadly disseminated and are fed to livestock across the region. In this manner, the salt mines represent an intriguing example of long-term human activity that has contributed to the continual selection, cultivation, and dissemination of cosmopolitan microorganisms.