Springback data from stamping and simulating the forming of advanced high strength steel

This dataset is comprised of a spreadsheet of simulation result files, cross-section geometries of stamped parts, strain results of cross-section of stamped parts, simulation data (strain stress displacement energies), and variation data of material properties of a single coil. This data is a collection of both experimental and simulation results from industrial and laboratory stamping of advanced high strength steels (AHSS). The steels that were stamped were a typical high-strength low-alloy (HSLA) steel, a transformation-induced plasticity (TRIP) steel, a super HSLA steel, and a dual phase (DP) steel. The selected part was an automatic Ford Falcon front cross-member component using the Ford Geelong stamping plant. The variation of the material and stamped parts was also collected.

Application of advanced experimental techniques for the microstructural characterization of nanobainitic steels

A 0.79C-1.5Si-1.98Mn-0.98Cr-0.24Mo-1.06Al-1.58Co (wt%) steel was isothermally heat treated at 350°C bainitic transformation temperature for 1 day to form fully bainitic structure with nano-layers of bainitic ferrite and retained austenite, while a 0.26C-1.96Si-2Mn-0.31Mo (wt%) steel was subjected to a successive isothermal heat treatment at 700°C for 300 min followed by 350°C for 120 min to form a hybrid microstructure consisting of ductile ferrite and fine scale bainite. The dislocation density and morphology of bainitic ferrite, and retained austenite characteristics such as size, and volume fraction were studied using Transmission Electron Microscopy. It was found that bainitic ferrite has high dislocation density for both steels. The retained austenite characteristics and bainite morphology were affected by composition of steels. Atom Probe Tomography (APT) has the high spatial resolution required for accurate determination of the carbon content of the bainitic ferrite and retained austenite, the solute distribution between these phases and calculation of the local composition of fine clusters and particles that allows to provide detailed insight into the bainite transformation of the steels. The carbon content of bainitic ferrite in both steels was found to be higher compared to the para-equilibrium level of carbon in ferrite. APT also revealed the presence of fine C-rich clusters and Fe-C carbides in bainitic ferrite of both steels.

Effect of composition and processing parameters on the formation of nano-bainite in advanced high strength steels

The nano-bainitic microstructures were compared in a 0.79C-1.5Si-1.98Mn-0.24Mo-1.06Al (wt%) steel after isothermal heat-treatment and a Fe-0.2C-1.5Mn-1.2Si-0.3M0-0.6Al-0.02Nb (wt%) steel after controlled thermo-mechanical processing. The microstructure for both steels consisted of bainite. The microstructural characteristics of bainite, such as the morphology of the nano-bainite and thicknesses of bainitic ferrite and retained austenite layers, as a function of steel composition and processing was studied using transmission electron microscopy (TEM). It was found that the nano-bainitic structure can be formed in the low alloy steel through thermomechanical processing. Atom probe tomography (APT) was employed as a powerful technique to determine local composition distributions in three dimensions with atomic resolution. The important conclusions from the APT research were that the carbon content of bainitic ferrite is higher than expected from paraequilibrium level of carbon in ferrite for both steels and that Fe-C clusters and fine particles are formed in the bainitic ferrite in both steels despite the high level of Si.

Current issues in management (Advanced Diploma of Management) TF/109/GEN/160/LP learner's resource

Study guide for TAFE management unit in Victoria.

Advanced vascular access workshop for dialysis nurses : a three-year review

There is increased awareness regarding the benefits of ultrasound for vascular access surveillance and guided cannulation in haemodialysis. However, finding time to train staff whilst working within the clinical setting is challenging. In 2009 a workshop was introduced in Victoria to provide a platform for nursing staff to learn advanced skills in surveillance and cannulation in a safe, supportive environment. The workshop covered topics such as: assessment and cannulation; surgical perspectives in vascular access; radiological perspectives in vascular access; surveillance and monitoring; cannulation competency package; antegrade/antegrade cannulation; and introduction to ultrasound plus five hours of practical sessions. Feedback from the workshop over the past three years has been positive, and staff have benefited from the both the theoretical and clinical components of the workshop. The success of this workshop highlights the demand for continuing education within the renal workforce.

Management of advanced neuroendocrine tumors with hepatic metastasis

Neuroendocrine tumors (NETs) in general and specifically these gastroenteropancreatic-neuroendocrine tumors often present a considerable diagnostic and therapeutic challenge, especially those that behave in an aggressive fashion. The majority of tumors are diagnosed at a stage that the only curative treatment, radical surgical intervention, is no longer an option and thus long-term therapy with somatostatin analogs is focused on symptom amelioration and in the improvement of quality of life. Although biotherapy is currently the most efficient treatment to achieve palliation, conventional chemotherapy may have some utility in undifferentiated or highly proliferating neuroendocrine carcinomas and pancreatic NETs. Hepatic metastases, depending on size, location, and number may be amenable to surgical resection or radiofrequency ablation. If surgery is not feasible, embolization either alone (bland), in combination with chemotherapeutic agents, or using radioactive microspheres can be used. Peptide receptor targeted radiotherapy using radiolabeled octapeptide analogs (⁹⁰Yttrium or ¹⁷⁷Lutetium-octreotide) may lead to reduction in tumor size, but in most circumstances has a tumor stabilizing effect. A variety of antiangiogenesis and growth factor-targeted agents have been evaluated, but to date, the results have failed to meet our expectations.

Nanoscale precipitation in advanced high strength steels

Precipitation strenghthening is one of the most important approaches for enhancing the strenght of microalloyed steels. This study has made a significant contribution in understanding the nucleation and growth mechanism of nanoscale interphase precipitates in steel during commercial processes. Atom Probe Tomography revealed the existence of nanoscale clusters with precipitates that then dictate the final strength.

Advanced pattern mining for complex sata analysis

The thesis has researched a set of critical problems in data mining and has proposed four advanced pattern mining algorithm to discover the most interesting and useful data patterns highly relevant to the user’s application targets from the data is represented in complex structures.

Comparison of advanced waste heat recovery systems with a novel oil heating system

Latest trends in waste heat recovery include systems like Thermo Electric Generation (TEG), Rankine cycle, and active warm up systems. The advantages and disadvantages of different approaches are critically discussed and compared with a novel and effective oil heating system that can deliver between 7% and 12% reductions of CO2 emissions and fuel consumption. The comparison includes the expected CO2 and fuel saving potential related to the legal drive cycle as well as real world driving, effects on regulated exhaust emissions, utilisation of resources, maintenance and service, vehicle performance, comfort, noise, and durability.