The three-dimensional structure of bothropasin, the main hemorrhagic factor from Bothrops jararaca venom: Insights for a new classification of snake venom metalloprotease subgroups

Bothropasin is a 48 kDa hemorrhagic PIII snake venom metalloprotease (SVMP) isolated from Bothrops jararaca, containing disintegrin/cysteine-rich adhesive domains. Here we present the crystal structure of bothropasin complexed with the inhibitor POL647. The catalytic domain consists of a scaffold of two subdomains organized similarly to those described for other SVMPs, including the zinc and calcium-binding sites. The free cysteine residue Cys(189) is located within a hydrophobic core and it is not available for disulfide bonding or other interactions. There is no identifiable secondary structure for the disintegrin domain, but instead it is composed mostly of loops stabilized by seven disulfide bonds and by two calcium ions. The ECD region is in a loop and is structurally related to the RGD region of RGD disintegrins, which are derived from I`ll SVMPs. The ECD motif is stabilized by the Cys(117)_Cys(310) disulfide bond (between the disintegrin and cysteine-rich domains) and by one calcium ion. The side chain of Glu(276) of the ECD motif is exposed to solvent and free to make interactions. In bothropasin, the HVR (hyper-variable region) described for other Pill SVMPs in the cysteine-rich domain, presents a well-conserved sequence with respect to several other Pill members from different species. We propose that this subset be referred to as PIII-HCR (highly conserved region) SVMPs. The differences in the disintegrin-like, cysteine-rich or disintegrin-like cysteine-rich domains may be involved in selecting target binding, which in turn could generate substrate diversity or specificity for the catalytic domain. (C) 2008 Elsevier Ltd. All rights reserved.

Adhesion as a tool for in-built nanotechnology design in cementitious materials

Confined water, such as those molecules in nanolayers of 2-3 nm in length, plays an important role in the adhesion of hydrophilic materials, mainly in cementitious ones. In this study, the effects of water containing kosmotropic substances on adhesion, known for their ability of enhancing the hydrogen bond (H-bond) network of confined water, were evaluated using mechanical strength tests. Indeed, to link adhesion provided by water confined in nanolayers to a macro-response of the cementitious samples, such as the bending strength, requires the evaluation of local water H-bond network configuration in the presence of kosmotropes, considering their influences on the extent and the strength of H-bonds. Among the kosmotropes, trimethylamine and sucrose provided a 50% increase in bending strength compared to the reference samples, the latter just using water as an adhesive, whereas trehalose was responsible for reducing the bending strength to a value close to the samples without any adhesive. The results attained opened up perspectives regarding exploring the confined water behavior which naturally occurs throughout the hydration process in cement-based materials.

Effect of light-curing units on push-out fiber post bond strength in root canal dentin

The purpose of this study was to evaluate the effectiveness of different light-curing units on the bond strength (push-out) of glass fiber posts in the different thirds of the root (cervical, middle and apical) with different adhesive luting resin systems (dual-cure total-etch; dual-cured and self-etch bonding system; and dual-cure self-adhesive cements), Disks of the samples (n = 144) were used, with approximately 1 mm of thickness of 48 bovine roots restored with glass fiber posts, that were luted with resin cements photo-activated by halogen LCU (QTH, Optilux 501) and blue LED (Ultraled), with power densities of 600 and 550 mW/cm(2), respectively. A universal testing machine (MTS 810 Material Test System) was used with a 1 mm diameter steel rod at cross-head speed of 0.5 mm/min until post extrusion, with load cell of 50 kg, for evaluation of the push-out strength in the different thirds of each sample. The push-out strength values in kgf were converted to MPa and analyzed through Analysis of Variance and Tukey`s test, at significance level of 5%. The results showed that there were no statistical differences between the QTH and LED LCUs. The self-adhesive resin cement had lower values of retention. The total-etch and self-adhesive system resin cements seem to be a possible alternative for glass fiber posts cementation into the radicular canal and the LED LCU can be applied as an alternative to halogen light on photo-activation of dual-cured resin cements.

Biosurfactants as Agents to Reduce Adhesion of Pathogenic Bacteria to Polystyrene Surfaces: Effect of Temperature and Hydrophobicity

Polystyrene surfaces were conditioned with surfactin and rhamnolipid biosurfactants and then assessed regarding the attachment of Staphylococcus aureus, Listeria monocytogenes, and Micrococcus lute us. The effect of different temperatures (35, 25, and 4 degrees C) on the anti-adhesive activity was also studied. Microbial adhesion to solvents and contact angle measurements were performed to characterize bacteria and material surfaces. The results showed that surfactin was able to inhibit bacterial adhesion in all the conditions analyzed, giving a 63-66% adhesion reduction in the bacterial strains at 4 degrees C. Rhamnolipid promoted a slight decrease in the attachment of S. aureus. The anti-adhesive activity of surfactin increased with the decrease in temperature, showing that this is an important parameter to be considered in surface conditioning tests. Surfactin showed good potential as an anti-adhesive compound that can be explored to protect surfaces from microbial contamination.

Air Conditioning and Refrigeration Student Looking at Plans

A student from the New York Trade School in the Air Conditioning and Refrigeration Dept. looks at plans on top of a building. Black and white photograph contains some damage from adhesive and writing on the front.

Tribology in Metal Working

This thesis focuses on the tribological performance of tool surfaces in two steel working operations, namely wire drawing and hot rolling. In all forming operations dimensions and surface finish of the products are of utmost importance. Forming basically includes three parts – forming conditions excluded – that may be changed; work material, tool and (possibly) lubricant. In the interface between work material and tool, the conditions are very aggressive with – generally or locally – high temperatures and pressures. The surfaces will be worn in various ways and this will change the conditions in the process. Consequently, the surface finish as well as the dimensions of the formed product may change and in the end, the product will not fulfil the requirements of the customer. Therefore, research and development in regard to wear, and consequently tribology, of the forming tools is of great interest. The investigations of wire drawing dies focus on coating adhesion/cohesion, surface characteristics and material transfer onto the coated steel both in laboratory scale as well as in the wire drawing process. Results show that it in wire drawing is possible to enhance the tribological performance of drawing dies by using a lubricant together with a steel substrate coated by a polished, dual-layer coating containing both hard and friction-lowering layers. The investigations of hot rolling work rolls focus on microstructure and hardness as well as cracking- and surface characteristics in both laboratory scale and in the hot strip mill. Results show that an ideal hot work roll material should be made up of a matrix with high hardness and a large amount of complex, hard carbides evenly distributed in the microstructure. The surface failure mechanisms of work rolls are very complex involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. This knowledge may be used to develop new tools with higher wear resistance giving better performance, lower costs and lower environmental impact.

An investigation of worn work roll materials used in the finishing stands of the hot strip mill for steel rolling

The surface failure characteristics of different work roll materials, i.e. High Speed Steel, High Chromium Iron and Indefinite Chill Iron, used in the finishing stands of a hot strip mill have been investigated using stereo microscopy, 3D optical profilometry, scanning electron microscopy and energy dispersive X-ray spectroscopy. The results show that the surface failure mechanisms of work rolls for hot rolling are very complex, involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. Despite the differences in chemical composition and microstructure, the tribological response of the different work roll materials was found to be strongly dependent on the material microstructure and especially the presence and distribution of microstructural constituents, such as the different carbide phases and graphite (in the case of Indefinite Chill Iron). Cracking and chipping of the work roll surfaces, both having a negative impact on work roll wear, are strongly influenced by the presence of carbides, carbide networks and graphite in the work roll surface. Consequently, the amount of carbide forming elements as well as the manufacturing process must be controlled in order to obtain an optimised microstructure and a predictable wear rate.

Mechanical and tribological properties of PVD-coated cemented carbide as evaluated by a new multi-pass scratch testing method

A new test method based on multipass scratch testing has been developed for evaluating the mechanical and tribological properties of thin, hard coatings. The proposed test method uses a pin-on-disc tribometer and during testing a Rockwell C diamond stylus is used as the “pin” and loaded against the rotating coated sample. The influence of normal load on the number of cycles to coating damage is investigated and the resulting coating damage mechanisms are evaluated by posttest scanning electron microscopy. The present study presents the test method by evaluating the performance of Ti0.86Si0.14N, Ti0.34Al0.66N, and (Al0.7Cr0.3)2O3 coatings deposited by cathodic arc evaporation on cemented carbide inserts. The results show that the test method is quick, simple, and reproducible and can preferably be used to obtain relevant data concerning the fatigue, wear, chipping, and spalling characteristics of different coating-substrate composites. The test method can be used as a virtually nondestructive test and, for example, be used to evaluate the fatigue and wear resistance as well as the cohesive and adhesive interfacial strength of coated cemented carbide inserts prior to cutting tests.

Microstructural, Mechanical and Tribological Characterisation of CVD and PVD Coatings for Metal Cutting Applications

The present thesis focuses on characterisation of microstructure and the resulting mechanical and tribological properties of CVD and PVD coatings used in metal cutting applications. These thin and hard coatings are designed to improve the tribological performance of cutting tools which in metal cutting operations may result in improved cutting performance, lower energy consumption, lower production costs and lower impact on the environment.  In order to increase the understanding of the tribological behaviour of the coating systems a number of friction and wear tests have been performed and evaluated by post-test microscopy and surface analysis. Much of the work has focused on coating cohesive and adhesive strength, surface fatigue resistance, abrasive wear resistance and friction and wear behaviour under sliding contact and metal cutting conditions. The results show that the CVD deposition of accurate crystallographic phases, e.g. α-Al2O3 rather than κ-Al2O3, textures and multilayer structures can increase the wear resistance of Al2O3. However, the characteristics of the interfaces, e.g. topography as well as interfacial porosity, have a strong impact on coating adhesion and consequently on the resulting properties.  Through the deposition of well designed bonding and template layer structures the above problems may be eliminated. Also, the presence of macro-particles in PVD coatings may have a significant impact on the interfacial adhesive strength, increasing the tendency to coating spalling and lowering the surface fatigue resistance, as well as increasing the friction in sliding contacts. Finally, the CVD-Al2O3 coating topography influences the contact conditions in sliding as well as in metal cutting. In summary, the work illuminates the importance of understanding the relationships between deposition process parameters, composition and microstructure, resulting properties and tribological performance of CVD and PVD coatings and how this knowledge can be used to develop the coating materials of tomorrow.

Wear of coated and uncoated PCBN cutting tool used in turning and milling

This licentiate thesis has the main focus on evaluation of the wear of coated and uncoated polycrystalline cubic boron nitride cutting tool used in cutting operations against hardened steel. And to exam the surface finish and integrity of the work material used. Harder work material, higher cutting speed and cost reductions result in the development of harder and more wear resistance cutting tools. Although PCBN cutting tools have been used in over 30 years, little work have been done on PVD coated PCBN cutting tools. Therefore hard turning and hard milling experiments with PVD coated and uncoated cutting tools have been performed and evaluated. The coatings used in the present study are TiSiN and TiAlN. The wear scar and surface integrity have been examined with help of several different characterization techniques, for example scanning electron microscopy and Auger electron spectroscopy.   The results showed that the PCBN cutting tools used displayed crater wear, flank wear and edge micro chipping. While the influence of the coating on the crater and flank wear was very small and the coating showed a high tendency to spalling. Scratch testing of coated PCBN showed that, the TiAlN coating resulted in major adhesive fractures. This displays the importance of understanding the effect of different types of lapping/grinding processes in the pre-treatment of hard and super hard substrate materials and the amount and type of damage that they can create. For the cutting tools used in turning, patches of a adhered layer, mainly consisting of FexOy were shown at both the crater and flank. And for the cutting tools used in milling a tribofilm consisting of SixOy covered the crater. A combination of tribochemical reactions, adhesive wear and mild abrasive wear is believed to control the flank and crater wear of the PCBN cutting tools. On a microscopic scale the difference phases of the PCBN cutting tool used in turning showed different wear characteristics. The machined surface of the work material showed a smooth surface with a Ra-value in the range of 100-200 nm for the turned surface and 100-150 nm for the milled surface. With increasing crater and flank wear in combination with edge chipping the machined surface becomes rougher and showed a higher Ra-value. For the cutting tools used in milling the tendency to micro edge chipping was significant higher when milling the tools steels showing a higher hard phase content and a lower heat conductivity resulting in higher mechanical and thermal stresses at the cutting edge.

Influência do choque térmico na aderência de azulejos ao substrato

O trabalho consta do estudo teórico-experimental da influência do choque térmico na aderência de azulejos ao substrato. Inicialmente é feita uma revisão bibliográfica sobre os vários componentes envolvidos no processo, são relatados elementos para elaboração de projetos de revestimentos, a normalização vigente e dgurnas das patologias mais comuns encontradas nas cerâmicas, especialmente para os azulejos, bem como suas formas de reparos e locais de maior ocorrência. Os fundamentos da teoria sobre aderência sáo abordados em um capitulo especial. No capitulo seguinte são apresentados os ensaios realizados, quais sejam, ensaios de choque térmico e de resistência de aderência 8, tração de azulejos. Estes azulejos, em finção da produção industrial, são de dois tipos: os confeccionados pelo processo monoqueima e os pelo processo biqueirna, sendo cada grupo de amostras assentado com argamassa adesiva a base de cimento, argamassa adesiva convencional e argamassa adesiva com aditivo incorporador de ar. A avaliação dos experimentos realizados é feita pelos métodos estatisticos, comprovando a importância das juntas de assentamento no desempenho ao longo da vida util dos tipos de azulejos estudados, com os resuItados encontrados constantes neste trabalho.

EFEITO do ÁCIDO GIBERÉLICO (AG3) NA FLORAÇÃO E PRODUÇÃO da LIMA ÁCIDA 'TAHITI' (Citrus latifolia Tan.)

A floração nos citros, assim como em outras fruteiras, é um dos fatores determinantes para a produção. A possibilidade de inibição ou redução da florada normal e alteração da época de produção para a lima 'Tahiti' é fator primordial para determinar sua rentabilidade econômica. O presente trabalho teve como objetivo avaliar o efeito do ácido giberélico sobre a florada, número de flores formadas, da lima ácida 'Tahiti', nas condições do Estado de São Paulo durante dois anos, buscando inibir a florada normal e observar o efeito desta inibição sobre produções temporãs. O delineamento experimental foi em blocos casualizados (5 blocos) com 3 plantas por tratamento. Foi utilizada uma planta como bordadura entre os tratamentos e uma linha de plantas entre os blocos. Os tratamentos foram: testemunha, 20, 40 e 80 mg/L de ácido giberélico (AG3) + 10 ml/L de espalhante adesivo, e o pH da água utilizada foi 6,2. As plantas foram tratadas com ácido giberélico durante o inverno (estação seca) após 50 dias sem irrigação no primeiro ano e 60 dias no segundo. O ácido giberélico reduziu o número de flores formadas (-81%) e aumentou a produção de frutos temporões (+59,77% ou +16,04 kg/pl).

Desenvolvimento, pobreza e meio ambiente no seridó potiguar: um estudo centrado nas micro-regiões do seridó oriental e ocidental

This research work intends to carry out a study focused on the dynamic between development, poverty reduction and conservation of natural resources. To consider this relationship to the region chosen was the micro-region of Eastern and Western Seridó in the state of Rio Grande do Norte. In recent years, several studies (Araújo, 2011; BASTOS, 2009) have pointed out that after a period of economic crisis in its tripodproductive, formed by the activities of farming, cotton farming, mining and faced in the eighties, this region of the State of Rio Grande do Norte, has not only shown signs of economic recovery but also improve their social indicators. On the other hand, studies of desertification as the view of the state of RN (produced in cooperation between the Government of RN and research institutions) and the Sustainable Development Plan of Seridó (ADES, 2000), indicate that there is an ongoing French process of degradation of natural resources that is capable of compromising the ability of sustaining such a system. To verify this reality and likely finding this relationship, this work is adopted for this study, the analysis of evolution of secondary data from official bodies such as the IBGE on HDI, per capita income and other social indicators between 2000 and 2009. Here is another time of the survey analysis of qualitative data collected from interviews with institutions of academic intervention in nature, researchers at the Federal University of Rio Grande do Norte (UFRN) State agencies that address the issue of the Middle Environment in Seridó: Institute for Sustainable Development of the NB (IDEMA) and the Brazilian Institute of Environment and the Amazon (IBAMA) and institutions of direct intervention in the region, as the Agency's Sustainable Development Seridó (adhesive) and the Joint Semi-Arid (ASA). After crossing data from quantitative and qualitative, it was found that the dynamics of the region's economic Seridó Potiguar partially answers the improvement of social indicators of poverty. Contribution by the State in this shared stock transfer income. Regarding the influence of productive restructuring in the region on issues of environment, it is noted that the ceramic tile industry, responsible for the absorption percentage of the population with limited ingress into the urban economy, given the low education, accounts for the increase of susceptibility to the ongoing process of desertification in North Seridó Rio Grande. We conclude finally that the guarantee of increased income, freedom and conservation of natural resources ensures primarily by changing the beliefs and values, especially on the part of the business sector, which use natural resources so predatory, aimed at maintaining their rates of return on investment. And concomitantly, the synchronization between technological change, through the use of new energy sources, and institutional change.

Efeito de giberelina (GA3) e do bioestimulante 'Stimulate' na indução floral e produtividade do maracujazeiro-amarelo em condições de safra normal

O objetivo do trabalho foi avaliar os efeitos de GA3, nas concentrações de 100; 200 e 300mg L-1 e do bioestimulante Stimulate®, em doses de 2,08; 4,17 e 6,25mL L-1, em duas aplicações via foliar, acrescidas de espalhante adesivo Silwett® a 0,05% e a exposição dos ramos à luminosidade, na indução floral e produtividade do maracujazeiro-amarelo, em condições de safra normal, em Araguari-MG. Aos 30 dias após a primeira aplicação dos tratamentos, iniciaram-se as avaliações do número de flores, com contagens diárias, nos dois lados da espaldeira, nos meses de setembro de 2002 a março de 2003. As colheitas dos frutos foram realizadas semanalmente, no período de novembro de 2002 a abril de 2003, observando-se a produção. O GA3 e o Stimulate não proporcionaram efeito significativo no número de flores, nas sete épocas, assim como no número total de flores. Não houve efeito dos tratamentos para a produtividade e produção total de frutos. Os ramos sob luminosidade pela tarde apresentaram maior número de flores, nos meses de setembro, dezembro, fevereiro e março. A interação entre os tratamentos e a exposição dos ramos à luminosidade não foi significativa para o número de flores, nas épocas avaliadas.

Distribuição espacial de Toxoptera citricida (Kirkaldy) (Hemiptera: Aphididae) na cultura de citros

O estudo da distribuição espacial de pragas é fundamental para elaboração de planos de amostragem para o uso do manejo integrado de pragas. Para o afídeo Toxoptera citricida (Kirkaldy), estudou-se a distribuição espacial em talhões de pomares de citros comerciais de laranja-doce [Citrus sinensis (L.) Osbeck] da variedade Pêra, com 5; 9 e 15 anos de idade, durante o período de setembro de 2004 a abril de 2005. Foram realizadas 14 amostragens de número de T. citricida em intervalos aproximados de 15 dias entre as mesmas, utilizando-se de armadilhas adesivas de cor amarela (0,11 x 0,11 m) fixadas à planta, a 1,5 m de altura aproximadamente. As armadilhas foram distribuídas na área, a cada cinco plantas na linha, em linhas alternadas, totalizando 137 armadilhas no talhão com 5 anos, 140 no talhão com 9 anos e 80 no talhão com 15 anos. Os índices de dispersão utilizados foram: razão variância média (I), índice de Morisita (Idelta), coeficiente de Green (Cx) e expoente k da distribuição Binomial Negativa. O índice que melhor representou a agregação do pulgão foi o expoente k da distribuição Binomial Negativa, e a distribuição binomial negativa foi o modelo que melhor se ajustou aos dados. Através destas análises, verificou-se que a maioria das amostragens apresentou uma distribuição agregada da população de T. citricida.