Confined site construction: An empirical analysis of factors impacting health and safety management

Purpose – The purpose of this paper is to identify, clarify and tabulate the various managerial issues encountered, to aid in the management of the complex health and safety concerns which occur within a confined construction site environment.

Design/methodology/approach – This is achieved through conducting extensive qualitative and qualitative research in the form of case studies, interviews and questionnaire survey.

Findings – The leading managerial issues in the management of health and safety on a confined construction site are found to be: “Difficulty to move materials around site safely”; “Lack of adequate room for the effective handling of materials”; “Difficulty in ensuring site is tidy and all plant and materials are stored safely”; “Close proximity of individuals to operation of large plant and machinery”; and joint fifth “Difficulty in ensuring proper arrangement and collection of waste materials on-site” along with “Difficulty in controlling hazardous materials and equipment on site”.

Practical implications – The resulting implication for practice of these results can be summarised by identifying that with sustained development of urban centres on a global scale, coupled with the increasing complexity of architectural designs, the majority of on-site project management professionals are faced with the onerous task of completing often intricate designs within a limited spatial environment, under strict health and safety parameters.

Originality/value – The subsequent value of the findings are such that just as on-site management professionals successfully identify the various managerial issues highlighted, the successful management of health and safety on a confined construction site is attainable.

Change in UK construction: Moving towards supply chain collaboration

There has been an increasing highlight of supply chain collaboration in UK construction. However, few studies have provided evidence for the current status. Based on the analysis of over 100 questionnaire responses in this research, it is found that the UK construction industry as a whole is experiencing an important change and moving towards supply chain collaboration. On the other hand, an unbalance is found for the change movement. In addition to the questionnaire survey, a series of expert interviews help to explore the specific characteristics of supply chain collaboration in construction and provide practical implications for collaboration strategy implementation.

Virtual Engineering Centre - Examples of Virtual Prototyping and Multidisciplinary Design Optimization

The requirement for the use of Virtual Engineering, encompassing the construction of Virtual Prototypes using Multidisciplinary Design Optimisation, for the development of future aerospace platforms and systems is discussed. Some of the activities at the Virtual Engineering Centre, a University of Liverpool initiative, are described and a number of case studies involving a range of applications of Virtual Engineering illustrated.

Cross-Cultural Intelligence (CQ): its impact on British Expatriates Adjustment in International Construction Projects

Purpose: The purpose of this paper is to investigate the relationship between the facets of cultural intelligence (CQ) (cognitive, meta-cognitive, motivational and behavioural) and the dimensions of cross-cultural adjustment (interaction, general and work adjustment).

Design/methodology/approach: Interviews and questionnaire survey were carried out with British expatriates from the architectural, engineering and construction sector. A total of 191 respondents, with experience from 29 different countries, actively participated in this research. Structural equation model was subsequently developed to investigate the relationship between elements of CQ and cross-cultural adjustment.

Findings: Results of structural equation modelling revealed that collectively all the four aspects of CQ have significant influence on general, interaction and work adjustment, particularly motivational and cognitive CQ. Cognitive CQ which empowers the expatriates with in-depth knowledge about different cultures was a significant predictor of interaction and work adjustment, whereas, motivational CQ is a significant predictor for general and work adjustment. However, no support was gathered for meta-cognitive and behavioural aspects of CQ.

Practical implications: Globally, construction companies and projects are entering an era of increased internationalisation which has prompted the migration/promotion of British construction professionals to different parts of the world for their specialised capabilities and skills. Thus, it is of utmost importance that these professionals adjust to their new world of varied culture and still be productive in their work.

Originality/value: An understanding of these essential factors can actually help British construction organisations to select and mentor individuals and to provide necessary training for successful international assignments.

NEC Contracting: Evaluation of the Inclusion of Dispute Review Boards in lieu of Adjudication in the Construction Industry in the United Kinddom

The construction industry is renowned for spending vast sums in the resolution of disputes, but never in the prevention. The purpose of this paper is to analyse the New Engineering Contract (NEC) to determine whether or not adjudication has become misaligned with the contract’s objective of promoting effective management. In doing so, the paper examines dispute review boards in order to ascertain if they could be a viable alternative to adjudication. A sequential mixed methodology is adopted including a detailed literature review, eight semi-structured interviews, culminating in the circulation and analysis of a questionnaire, to record the significance of the factors identified. The research concludes that the majority of individuals agree that dispute review boards would be more aligned with the NEC. The familiarity of members, the potential to curb rogue behaviour of parties and the proactive nature of the board are flagged as positive features, however the cost aspect requires further investigation. The reservations made in the study about adjudication, such as the priority given to speed over accuracy and also the adversarial nature of the process, suggest that a preventative step prior to proceeding to adjudication would coincide more with the three core themes of the NEC Contract and therefore, be a positive addition.

Construction Dispute Resolution in Ireland during Recession: Best Practice for Small-to-Medium Enterprises

The purpose of this paper is to identify best practice construction dispute resolution in small-to-medium enterprises (SMEs) within Ireland during the recent economic recession. A sequential mixed methodology encompassing a detailed literature review, case studies, and questionnaire survey is adopted, with results analyzed using both exploratory (data reduction) and confirmatory (structural equation modelling) factor analysis. The results show that four core aspects should be adopted by SMEs to achieve best practice construction dispute resolution in recession: third-party intervention, adoption of a streamlined process, proactive party characteristics, and the use of legal professionals. Numerous studies of this subject have been conducted; however, no research has been done to date documenting best practice in construction dispute resolution within SMEs, particularly in light of the economic recession in Ireland. It is clear that dispute resolution in Ireland is currently undergoing fundamental changes, and time is necessary to see if the new Construction Contracts Act 2013 will help this practice. Therefore, it is a fundamental requirement for project management and legal professionals to acknowledge the changing environment attributable to the economic downturn and the resultant SME best practices in dispute resolution. This paper fulfills a gap in knowledge with the emergence of the economic recession and the evolution of best practice in dispute resolution within SMEs in the Irish construction sector.

Hygrothermal Features of Laterite Dimension Stones for Sub-Saharan Residential Building Construction

The building sector is widely recognized as having a major impact on sustainable development. Both in developed and developing countries, sustainability in buildings approaches are growing. Laterite dimension stone (LDS) is a building material that was traditionally used in sub-Saharan Africa, but its technical features still need to be assessed. This article presents some results of a study focused on the characterization of LDS exploited in Burkina Faso for building purposes. The measured average thermal conductivity is 0.51  W/mK, which increases with water content and evolves with the specific gravity and with porosity. Rock mineral phases (quartz, goethite, hematite, magnetite) are cemented by kaolinite. The porosity of the material is high (30%), with macropores visible on the surface and found in the rock inner structure as well. Results from the hygrothermal monitoring of a pilot building are also presented.

Waste Management and Sustainability during the Design Phase of a Construction Project: A Qualitative Review

Waste management and sustainability are two core underlying philosophies that the construction sector must acknowledge and implement; however, this can prove difficult and time consuming. To this end, the aim of this paper is to examine waste management strategies and the possible benefits, advantages and disadvantages to their introduction and use, while also to examine any inter-relationship with sustainability, particularly at the design stage. The purpose of this paper is to gather, examine and review published works and investigate factors which influence economic decisions at the design phase of a construction project. In addressing this aim, a three tiered sequential research approach is adopted; in-depth literature review, interviews/focus groups and qualitative analysis. The resulting data is analyzed, discussed, with potential conclusions identified; paying particular attention to implications for practice within architectural firms. This research is of importance, particularly to the architectural sector, as it can add to the industry’s understanding of the design process, while also considering the application and integration of waste management into the design procedure. Results indicate that the researched topic had many advantages but also had inherent disadvantages. It was found that the potential advantages outweighed disadvantages, but uptake within industry was still slow and that better promotion and their benefits to; sustainability, the environment, society and the industry were required.

A research-based approach to exploring the adoption of novel UK-based concrete test methods in Chinese construction sector

As part of a UK-China science bridge project - a UK government funded initiative linking leading universities and businesses in selective partnering countries in 2009 a collaborative research programme was initiated between Queen's University and the Research Institute of High Performance Concrete (part of the Central Research Institute of Building and Construction) in Beijing.

For further details email b.magee@ulster.ac.uk

Rural engineering infrastructures design and public facility locations

O desenvolvimento das redes de estradas rurais, especialmente em áreas montanhosas, é a intervenção chave para melhorar a acessibilidade às localidades e aos serviços públicos, cobrindo o maior número de localidades e de serviços públicos, otimizando os escassos recursos disponíveis em países em desenvolvimento. Este estudo explora diferentes modelos de organização de redes de estradas rurais considerando a construção de novas ligações ou o melhoramento de estradas existentes. Um método, baseado na cobertura da rede de estradas rurais, é utilizado para identificar os pontos nodais que formam a rede rural base numa específica região, a qual cobrirá um conjunto dos serviços públicos e de localidades. O modelo assenta numa rede rural de estradas típica ("backbone" e "branch") das regiões montanhosas do Nepal. Os modelos propostos fornecem um conjunto de possibilidades de ligações a estabelecer ou a melhorar e oferece soluções para diferentes níveis de orçamento, que otimizam os custos de transporte na rede, considerando diferentes tipos de pavimento (em solo, granular ou asfáltico). Foi realizado separadamente um modelo dedicado a análises multi-objetivo para resolver problemas de melhoramento de ligações dentro da rede considerando dois objectivos, minimizar os custos de operação para o utilizador e maximizar a população coberta pela rede de estradas, considerando ligações pavimentadas e não pavimentadas (em solo, granular ou asfáltico) dentro de um determinado limite orçamental. O modelo dá ao decisor (DM) diferentes alternativas eficientes para que este possa tomar uma decisão final. Estes modelos, desenvolvidos para redes de estradas rurais, são também aplicáveis a outras redes de infraestruturas rurais, tais como, de fornecimento de água, de eletricidade e de telecomunicações. A implementação dos modelos nas redes de estradas rurais dos distritos de Gorkha e Lamjung do Nepal permitiu confirmara sua aplicabilidade. Verifica-se que os modelos propostos são mais práticos e realísticos no estudo de soluções de melhoramento e de desenvolvimento de redes de estradas rurais em regiões montanhosas de países em desenvolvimento.

Radiological protection and nuclear engineering studies in multi-MW target systems

Tese de doutoramento, Física, Universidade de Lisboa, Faculdade de Ciências, 2014

Taking environmental engineering out of the laboratory

Environmental engineering is a core component of most construction and surveying undergraduate courses. It is generally accepted that students on these courses should have an understanding of thermal comfort, heat transfer, condensation, lighting, noise transmission and acoustics. Experiments are essential in developing students’ awareness and understanding of the underlying physical concepts which drive environmental engineering solutions. Traditionally these experiments have been conducted by students working in small groups in laboratories. However, increasing student numbers and, in particular, the growth in part time study, have placed significant additional demands on limited laboratory resources. The availability of reasonably priced, simple, hand-held equipment has made it possible for students to conduct experiments outside the confines of the laboratory. Furthermore, various professional software packages (some of which are freely available online) enable the resultant data to be further developed and analysed in conjunction with the conventional textbook approach. This paper examines these alternative approaches to the traditional laboratory experiment. An assessment is provided of the types of experiment which are both possible and appropriate, and the efficacy of these approaches is considered.