Measurement of the galactic cosmic ray antiproton flux from 0.25 gev to 3.11 gev with the isotope matter antimatter experiment (imax)

The intensities and relative abundances of galactic cosmic ray protons and antiprotons have been measured with the Isotope Matter Antimatter Experiment (IMAX), a balloon-borne magnet spectrometer. The IMAX payload had a successful flight from Lynn Lake, Manitoba, Canada on July 16, 1992. Particles detected by IMAX were identified by mass and charge via the Cherenkov-Rigidity and TOP-Rigidity techniques, with measured rms mass resolution ≤0.2 amu for Z=1 particles.

Cosmic ray antiprotons are of interest because they can be produced by the interactions of high energy protons and heavier nuclei with the interstellar medium as well as by more exotic sources. Previous cosmic ray antiproton experiments have reported an excess of antiprotons over that expected solely from cosmic ray interactions.

Analysis of the flight data has yielded 124405 protons and 3 antiprotons in the energy range 0.19-0.97 GeV at the instrument, 140617 protons and 8 antiprotons in the energy range 0.97-2.58 GeV, and 22524 protons and 5 antiprotons in the energy range 2.58-3.08 GeV. These measurements are a statistical improvement over previous antiproton measurements, and they demonstrate improved separation of antiprotons from the more abundant fluxes of protons, electrons, and other cosmic ray species.

When these results are corrected for instrumental and atmospheric background and losses, the ratios at the top of the atmosphere are p/p=3.21(+3.49, -1.97)x10^(-5) in the energy range 0.25-1.00 GeV, p/p=5.38(+3.48, -2.45) x10^(-5) in the energy range 1.00-2.61 GeV, and p/p=2.05(+1.79, -1.15) x10^(-4) in the energy range 2.61-3.11 GeV. The corresponding antiproton intensities, also corrected to the top of the atmosphere, are 2.3(+2.5, -1.4) x10^(-2) (m^2 s sr GeV)^(-1), 2.1(+1.4, -1.0) x10^(-2) (m^2 s sr GeV)^(-1), and 4.3(+3.7, -2.4) x10^(-2) (m^2 s sr GeV)^(-1) for the same energy ranges.

The IMAX antiproton fluxes and antiproton/proton ratios are compared with recent Standard Leaky Box Model (SLBM) calculations of the cosmic ray antiproton abundance. According to this model, cosmic ray antiprotons are secondary cosmic rays arising solely from the interaction of high energy cosmic rays with the interstellar medium. The effects of solar modulation of protons and antiprotons are also calculated, showing that the antiproton/proton ratio can vary by as much as an order of magnitude over the solar cycle. When solar modulation is taken into account, the IMAX antiproton measurements are found to be consistent with the most recent calculations of the SLBM. No evidence is found in the IMAX data for excess antiprotons arising from the decay of galactic dark matter, which had been suggested as an interpretation of earlier measurements. Furthermore, the consistency of the current results with the SLBM calculations suggests that the mean antiproton lifetime is at least as large as the cosmic ray storage time in the galaxy (~10^7 yr, based on measurements of cosmic ray ^(10)Be). Recent measurements by two other experiments are consistent with this interpretation of the IMAX antiproton results.

Strategies for the Stereoselective Synthesis of Carbon Quaternary Centers via Transition Metal-Catalyzed Alkylation of Enolate Compounds

Notwithstanding advances in modern chemical methods, the selective installation of sterically encumbered carbon stereocenters, in particular all-carbon quaternary centers, remains an unsolved problem in organic chemistry. The prevalence of all-carbon quaternary centers in biologically active natural products and pharmaceutical compounds provides a strong impetus to address current limitations in the state of the art of their generation. This thesis presents four related projects, all of which share in the goal of constructing highly-congested carbon centers in a stereoselective manner, and in the use of transition-metal catalyzed alkylation as a means to address that goal.

The first research described is an extension of allylic alkylation methodology previously developed in the Stoltz group to small, strained rings. This research constitutes the first transition metal-catalyzed enantioselective α-alkylation of cyclobutanones. Under Pd-catalysis, this chemistry affords all–carbon α-quaternary cyclobutanones in good to excellent yields and enantioselectivities.

Next is described our development of a (trimethylsilyl)ethyl β-ketoester class of enolate precursors, and their application in palladium–catalyzed asymmetric allylic alkylation to yield a variety of α-quaternary ketones and lactams. Independent coupling partner synthesis engenders enhanced allyl substrate scope relative to allyl β-ketoester substrates; highly functionalized α-quaternary ketones generated by the union of our fluoride-triggered β-ketoesters and sensitive allylic alkylation coupling partners serve to demonstrate the utility of this method for complex fragment coupling.

Lastly, our development of an Ir-catalyzed asymmetric allylic alkylation of cyclic β-ketoesters to afford highly congested, vicinal stereocenters comprised of tertiary and all-carbon quaternary centers with outstanding regio-, diastereo-, and enantiocontrol is detailed. Implementation of a subsequent Pd-catalyzed alkylation affords dialkylated products with pinpoint stereochemical control of both chiral centers. The chemistry is then extended to include acyclic β-ketoesters and similar levels of selective and functional group tolerance are observed. Critical to the successful development of this method was the employment of iridium catalysis in concert with N-aryl-phosphoramidite ligands.

Generation time and utilization of energy by aquatic bacteria. [Translation from: Trudy Instituta Biologii Vnutrennykh Vodnany 11(14), 198-202, 1966.]

Recent research has shown that the biomass of bacteria in lakes and other water-bodies can attain significant values. The huge production of bacteria is brought about by their great rate of reproduction. In a series of cases their biomass exceeds the biomass of phytoplankton. Therefore in a study of the biological productivity of water bodies it is necessary to calculate the biomass and production not only of the phyto- and zooplankton, but also of bacteria.The authors uses different methods and formulae to to compare the time of one generation of the bacteria.

On a method of determination of chlorophyll in cells of algae collected on a membrane filter. [Translation from: Trudy Instituta Biologii Vnutrennykh Vodnany 11(14), 198-202, 1966.]

The original method, proposed by Yentsch (1957), of determination of chlorophyll directly in the cells, attracts attention by its simplicity. In order to measure the content of chlorophyll by this method, a determined volume of suspension of algae is filtered through a membrane filter. The latter is dried a little, clarified by immersion oil, clamped between two glasses, and spectrophotometrized. Extinction is read off at , wavelengths equal to 670 millimicrons (around the maximum absorption of chlorophyll a in the cell) and 750 millimicrons (correction for non- specific absorption and dispersion of light by particles of the preparation). The method of Yentsch was employed by the authors for determination of chlorophyll-a in samples of phytoplankton. They conclude that in spite of the simplicity and convenience of determination the method must be applied sufficiently carefully. It is more suitable for analysis of cultures of algae, where, non-specific absorption of light is insignificant.

Development of Microfluidic Devices with the Use of Nanotechnology to Aid in the Analysis of Biological Systems Including Membrane Protein Separation, Single Cell Analysis, and Genetic Markers

Computation technology has dramatically changed the world around us; you can hardly find an area where cell phones have not saturated the market, yet there is a significant lack of breakthroughs in the development to integrate the computer with biological environments. This is largely the result of the incompatibility of the materials used in both environments; biological environments and experiments tend to need aqueous environments. To help aid in these development chemists, engineers, physicists and biologists have begun to develop microfluidics to help bridge this divide. Unfortunately, the microfluidic devices required large external support equipment to run the device. This thesis presents a series of several microfluidic methods that can help integrate engineering and biology by exploiting nanotechnology to help push the field of microfluidics back to its intended purpose, small integrated biological and electrical devices. I demonstrate this goal by developing different methods and devices to (1) separate membrane bound proteins with the use of microfluidics, (2) use optical technology to make fiber optic cables into protein sensors, (3) generate new fluidic devices using semiconductor material to manipulate single cells, and (4) develop a new genetic microfluidic based diagnostic assay that works with current PCR methodology to provide faster and cheaper results. All of these methods and systems can be used as components to build a self-contained biomedical device.

Investigations on saprolegniosis. II. Study on the process of penetrations showing evidence of a proteolytic enzyme and histopathological aspects [Translation from: Riv.ital.Piscicolt.Ittiopatol. 11(4), 109-117, 1976]

The study of enzymatic activity is of great importance in the immunology of fungi. Indeed, knowledge of biological activity of antigenic structures is important for the elucidation of host-parasite relations as well as in the search for a taxonomic factor permitting differential diagnoses. The authors used Saprolegnia cultures to analyse soluble antigenic fractions arising from the mycelium of cultures of 4 species of Saprolegnia, which are found most frequently in the parasitic state on fish: S. parasitica, S. ferax, S. delica, S. diclina. The authors conclude that in the study of saprolegniasis, the enzymatic approach affords new elements for the examination of the etiology of fungi as well as an element of gravity concerning the biochemical modifications necessary to the change of saprophytism to parasitism.

Estudo da enzima Horseradish peroxidase (HRP) no descoramento dos corantes têxteis Azul Drimaren X-3LR, Azul Drimaren X-BLN, Rubinol Drimaren X-3LR e Azul Drimaren CL-R

O presente trabalho avaliou o potencial da enzima HRP no descoramento dos corantes têxteis: Azul Drimaren X-3LR (DMBLR), Azul Drimaren X-BLN (DMBBLN), Rubinol Drimaren X-3LR (DMR) e Azul Drimaren CL-R (RBBR). Parâmetros como concentração do corante, temperatura, concentração de peróxido de hidrogênio (H2O2) e tempo de reação foram otimizados. Os ensaios de descoramento dos corantes foram realizados a partir desses resultados. As melhores condições reacionais determinadas para os corantes estudados foram: concentração do corante = 120 mg L-1, temperatura = 35C, concentração de H2O2 = 0,55 mM e tempo de reação = 1 hora. Os percentuais de descoramento dos corantes DMBLR, DMBBLN, DMR e RBBR, após o tratamento enzimático foi de 99, 77, 94 e 97%, respectivamente. O tempo reacional de 5 minutos foi suficiente para os corantes DMBLR e RBBR apresentarem elevada porcentagem de descoramento, 96% para ambos. Já os corantes DMBBLN e DMR só apresentaram elevado grau de descoramento após 1 hora de reação, sendo o corante DMBBLN o mais recalcitrante, apresentando uma melhora de 10% na porcentagem de descoramento, após 24 horas de reação. Além do grau de descoramento, também foi avaliada a toxicidade dos corantes antes e após o tratamento enzimático utilizando Daphnia pulex e Artemia salina como bioindicadores de toxicidade. Resultados toxicológicos utilizando Daphnia pulex não foram conclusivos, indicando que esse bioindicador não foi adequado para avaliar a toxicidade dos corantes estudados no meio reacional utilizado. Com o uso da Artemia salina na avaliação toxicológica foi observado uma redução da toxicidade para os corantes DMBLR, DMR e RBBR após tratamento enzimático, e um aumento da toxicidade não significativo para o corante DMBBLN. Os resultados obtidos no trabalho ressaltam a eficiência da enzima HRP no descoramento dos corantes têxteis estudados, sem a geração de produtos tóxicos e prejudiciais ao meio ambiente

The relationship between boat size and fish catches in the gillnet fishery of Lake Victoria, Uganda

The number and size composition of gillnets, fishing grounds, and the quantity and composition of fish catches were related to the size of fishing boat. The overall number of gillnets per boat increased from 20.9 + or - 2.3 nets in 5-6 m long boats to 88.6 + or - 11.8 nets in 11-12 m long boats. The proportion of large mesh sizes, + or more than 127 mm, also increased from 40% in 5-6 m long boats to 100% in boats longer than 10 m. Fish catches are related to the size of boat and this should be considered when formulating management guidelines of the lake's fishery. Promotion of large fishing boats 8 m or longer and restriction on the number and/or mesh size of gillnets of smaller boats could increase ecological and socio-economic benefits.

A study of the reproductive biology of dace in the middle Ob [introduction , summary and table captions only] [Translation from: Trudy tomsk. gos. Univ. 125, pp.77-91]

The Siberian Dace (Leuciscus leuciscus baicalensis (Dyb)is an important trade fish in Siberian waters. In the Ob basin more than 30,000 centners are produced annually. Catches of dace fluctuate significantly both between different rivers and between years in the Tomsk region. Defining the stocks of dace in the waters of the Tomsk region and explaining the fluctuations over time seems to be a very important and relevant question for the workers of the fishing industry. An answer, however, requires an accurate knowledge of the biology of dace; its reproductive, feeding and migration habits and the conditions of wintering etc. In the following we examine one of the above questions i.e. the biology of the reproduction of dace. The study was carried out in the Middle Ob in May 1951. This tranlations provides the introduction, summary and table captions only of the original article.

Mellum Island (southern North Sea): dynamic processes and sedimentary structures. I. Southern tidal flat, transition zone and high-surface.[p.72 (Blasensand) only][Translation from: Senckenbergiana Maritima 11, 59-113, 1979]

This partial translation of a longer article describes the phenomenon of ”Blasensand”. Blasensand is formed when sedimentation of dried out sand is suddenly flooded from above. A more detailed explanation of Blasensand is given in this translated part of the paper.

I. A study of the dynamics of triplet excitons in molecular crystals. II. An investigation of delayed light emission from Chlorella pyrenoidosa

I. PREAMBLE AND SCOPE

Brief introductory remarks, together with a definition of the scope of the material discussed in the thesis, are given.

II. A STUDY OF THE DYNAMICS OF TRIPLET EXCITONS IN MOLECULAR CRYSTALS

Phosphorescence spectra of pure crystalline naphthalene at room temperature and at 77˚ K are presented. The lifetime of the lowest triplet ³B_1u state of the crystal is determined from measurements of the time-dependence of the phosphorescence decay after termination of the excitation light. The fact that this lifetime is considerably shorter in the pure crystal at room temperature than in isotopic mixed crystals at 4.2˚ K is discussed, with special importance being attached to the mobility of triplet excitons in the pure crystal.

Excitation spectra of the delayed fluorescence and phosphorescence from crystalline naphthalene and anthracene are also presented. The equation governing the time- and spatial-dependence of the triplet exciton concentration in the crystal is discussed, along with several approximate equations obtained from the general equation under certain simplifying assumptions. The influence of triplet exciton diffusion on the observed excitation spectra and the possibility of using the latter to investigate the former is also considered. Calculations of the delayed fluorescence and phosphorescence excitation spectra of crystalline naphthalene are described.

A search for absorption of additional light quanta by triplet excitons in naphthalene and anthracene crystals failed to produce any evidence for the phenomenon. This apparent absence of triplet-triplet absorption in pure crystals is attributed to a low steady-state triplet concentration, due to processes like triplet-triplet annihilation, resulting in an absorption too weak to be detected with the apparatus used in the experiments. A comparison of triplet-triplet absorption by naphthalene in a glass at 77˚ K with that by naphthalene-h₈ in naphthalene-d₈ at 4.2˚ K is given. A broad absorption in the isotopic mixed crystal triplet-triplet spectrum has been tentatively interpreted in terms of coupling between the guest ³B_1u state and the conduction band and charge-transfer states of the host crystal.

III. AN INVESTIGATION OF DELAYED LIGHT EMISSION FROM Chlorella Pyrenoidosa

An apparatus capable of measuring emission lifetimes in the range 5 X 10^-9 sec to 6 X 10^-3 sec is described in detail. A cw argon ion laser beam, interrupted periodically by means of an electro-optic shutter, serves as the excitation source. Rapid sampling techniques coupled with signal averaging and digital data acquisition comprise the sensitive detection and readout portion of the apparatus. The capabilities of the equipment are adequately demonstrated by the results of a determination of the fluorescence lifetime of 5, 6, 11, 12-tetraphenyl-naphthacene in benzene solution at room temperature. Details of numerical methods used in the final data reduction are also described.

The results of preliminary measurements of delayed light emission from Chlorella Pyrenoidosa in the range 10^-3 sec to 1 sec are presented. Effects on the emission of an inhibitor and of variations in the excitation light intensity have been investigated. Kinetic analysis of the emission decay curves obtained under these various experimental conditions indicate that in the millisecond-to-second time interval the decay is adequately described by the sum of two first-order decay processes. The values of the time constants of these processes appear to be sensitive both to added inhibitor and to excitation light intensity.

Primary cosmic-ray positrons and negatrons in 1968 at energies between 11 and 204 MeV

The cosmic-ray positron and negatron spectra between 11 and 204 MeV have been measured in a series of 3 high-altitude balloon flights launched from Fort Churchill, Manitoba, on July 16, July 21, and July 29, 1968. The detector system consisted of a magnetic spectrometer utilizing a 1000-gauss permanent magnet, scintillation counters, and a lucite Čerenkov counter.

Launches were timed so that the ascent through the 100 g/cm² level of residual atmosphere occurred after the evening geomagnetic cutoff transition. Data gathered during ascent are used to correct for the contribution of atmospheric secondary electrons to the flux measured at float altitude. All flights floated near 2.4 g/cm².

A pronounced morning intensity increase was observed in each flight. We present daytime positron and negatron data which support the interpretation of the diurnal flux variation as a change in the local geomagnetic cutoff. A large diurnal variation was observed in the count rate of positrons and negatrons with magnetic rigidities less than 11 MV and is evidence that the nighttime cutoff was well below this value.

Using nighttime data we derive extraterrestrial positron and negatron spectra. The positron-to-total-electron ratio which we measure indicates that the interstellar secondary, or collision, source contributes ≾50 percent of the electron flux within this energy interval. By comparing our measured positron spectrum with the positron spectrum calculated for the collision source we derive the absolute solar modulation for positrons in 1968. Assuming negligible energy loss during modulation, we derive the total interstellar electron spectrum as well as the spectrum of directly accelerated, or primary, electrons. We examine the effect of adiabatic deceleration and find that many of the conclusions regarding the interstellar electron spectrum are not significantly altered for an assumed energy loss of up to 50 percent of the original energy.

Report of the PRA carried out at Ihale Beach, Tanzania, April 11-14, 2000

Ihale is a large landing site lying approximately 65 km. from Mwanza along the main Mwanza-Musoma highway. Ihale Beach was selected as a potential candidate for the 3-beaches study because of its proximity to Mwanza, and hence suitability for frequent monitoring; and because it is served by a road accessible during the rainy seasons. As with the first training Participatory Rural Appraisal (PRA) on Kiumba Beach on Kenya's Rusinga Island, the objectives with this PRA were as follows: (a) To identify and understand Ihale's community-based organizations and institutions which have a role in the lake's fishery. (b) To consider the key issues which arise from this study for the involvement of communities and community-based organizations and/or institutions such as those at Ihale Beach, in the co-management of Lake Victoria's fishery.

Efeito de um primer autocondicionante na resistência ao cisalhamento de bráquetes com compósito pré-incorporado

O uso de primers autocondicionantes e de bráquetes com compósito pré-incorporado tem sido apresentado como uma alternativa para a redução de passos clínicos. O propósito deste estudo foi avaliar o efeito de um primer autocondicionante (Transbond Plus Self-Etching Primer - SEP) na resistência ao cisalhamento de bráquetes com compósito pré-incorporado colados in vivo. A amostra consistiu de 92 dentes obtidos de 23 pacientes com indicação prévia de extração de 4 pré-molares. Os dentes foram divididos em 4 grupos, sendo os bráquetes colados pelo mesmo operador, alternando os quadrantes em cada paciente: Grupo 1 (controle) - Ácido fosfórico à 37% + primer (Transbond XT Primer) + compósito (Transbond XT Adhesive Paste) + bráquete convencional; Grupo 2 - Ácido fosfórico à 37% + primer + bráquete com compósito pré-incorporado; Grupo 3 SEP + compósito + bráquete convencional; Grupo 4 - SEP + bráquete com compósito pré-incorporado. Após 30 dias os pré-molares foram extraídos, sendo submetidos ao teste de resistência ao cisalhamento através da uma Máquina de Ensaios Universal, com velocidade de 0,5mm/min. Os dados obtidos pelos grupos foram analisados com 2-way ANOVA (p<0,05). As forças médias e desvios padrão obtidos foram os seguintes: Grupo 1 = 11,35 (2,36) MPa; Grupo 2 = 9,77 (2,49) MPa; Grupo 3 = 10,89 (2,60) MPa; e Grupo 4 = 10,16 (2,75) MPa. Não foi observada diferença significativa entre o uso do SEP e o de condicionador e primer tradicionais (p = 0,948). De qualquer modo, diferenças significativas na força de adesão foram observadas quando utilizados bráquetes com compósito pré-incorporado (p = 0,032). Pode ser concluído que a combinação do primer autocondicionante com o bráquete com compósito pré-incorporado apresentou valores de força de adesão adequados, sendo promissora para uso clínico.