Biocompatibility Evaluation of 3 Facial Silicone Elastomers

The failure of facial prostheses is caused by limitations in the properties of existing materials, especially the biocompatibility. This study aimed to evaluate the biocompatibility of maxillofacial silicones in subcutaneous tissue of rats. Thirty Wistar rats received subcutaneous implants of 3 maxillofacial silicone elastomers (LIM 6050, MDX 4-4210, and industrial Silastic 732 RTV). A histomorphometric evaluation was conducted to analyze the biocompatibility of the implants. Eight areas of 60.11 mm(2) from the surgical pieces were analyzed. Mesenchymal cells, eosinophils, and foreign-body giant cells were counted. Data were submitted to analysis of variance and Tukey test. Initially, all implanted materials exhibited an acceptable tissue inflammatory response, with tissue reactions varying from light to moderate. Afterward, a fibrous capsule around the silicone was observed. The silicones used in the current study presented biocompatibility and can be used for implantation in both medical and dental areas. Their prosthetic indication is conditioned to their physical properties. Solid silicone is easier to adapt and does not suffer apparent modifications inside the tissues.

Avaliação clínica de sinais e sintomas da disfunção temporomandibular em crianças

OBJETIVO: avaliar a freqüência dos sinais e sintomas, dos hábitos parafuncionais e das características oclusais de 80 crianças, pacientes da clínica de Ortodontia Preventiva da Faculdade de Odontologia de Araçatuba - UNESP. METODOLOGIA: o exame clínico constituiu-se de avaliação das características oclusais do paciente e observação da presença de hábitos parafuncionais. As crianças foram submetidas a uma entrevista, supervisionadas pelos pais, cujas perguntas relacionavam-se com os sinais e sintomas da disfunção. RESULTADOS E CONCLUSÕES: concluiu-se que os sinais e sintomas mais freqüentes foram o hábito de ranger os dentes, dores de cabeça e ruídos na ATM. A onicofagia e o bruxismo foram os hábitos parafuncionais mais prevalentes. A freqüência de sinais e sintomas da disfunção temporomandibular pode ser verificada em crianças por meio da entrevista e exame clínico minucioso.

Effect of acid etching time on demineralization of primary and permanent coronal dentin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Skeletal and dental components of Class II correction with the bionator and removable headgear splint appliances

The purpose of this study was to differentiate the dentoalveolar and skeletal effects to better understand orthodontic treatment. We evaluated the treatment changes associated with the bionator and the removable headgear splint (RHS). Methods: The sample comprised 51 consecutively treated Class II patients from 1 office who had all been successfully treated with either a bionator (n = 17) or an RHS appliance (n = 17). Class II patients waiting to start treatment later served as controls (n = 17). A modified version of the Johnston pitchfork analysis was used to quantify the dentoalveolar and skeletal contributions to the anteroposterior correction at the levels of the molars and the incisors. Results: Both appliances significantly improved anteroposterior molar relationships (2.15 mm for the bionator, 2.27 mm for the RHS), primarily by dentoalveolar modifications (1.49 and 2.36 mm for the bionator and the RHS, respectively), with greater maxillary molar distalization in the RHS group. Overjet relationships also improved significantly compared with the controls (3.11 and 2.12 mm for the bionator and the RHS, respectively), due primarily to retroclination of the maxillary incisors (2.2 and 2.38 mm for the bionator and the RHS, respectively). The differences between overall corrections and dentoalveolar modifications for both molar and overjet relationships were explained by skeletal responses, with the bionator group showing significantly greater anterior mandibular displacement than the RHS group. Conclusions: The bionator and the RHS effectively corrected the molar relationships and overjets of Class II patients primarily by dentoalveolar changes. (Am J Orthod Dentofacial Orthop 2008; 134: 732-41)

Titanium surface topography after brushing with fluoride and fluoride-free toothpaste simulating 10 years of use

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of Er,Cr: YSGG laser on bond strength of self-adhesive resin cement

The purpose of this study was to investigate the bond strength of fiber post previously laser treated root canals. Forty single-rooted bovine teeth were endodontically treated, randomly and equally divided into two main groups according to the type of pretreatment: G1: 2.5% NaOCl (control group); and G2: Er,Cr:YSGG laser. Each group was further subdivided into 2 groups based on the category of adhesive systems/ luting materials used: a: an etch-and-rinse resin cement (Single Bond/RelyX ARC; 3M ESPE), and b: a self-adhesive resin cement (Rely X Unicem; 3M ESPE). Three 1.5 mm thick slabs were obtained per root and the push-out test was performed at a crosshead speed of 0.5 mm/min until post dislodgement occurred. Data were analyzed by ANOVA and post-hoc Tukey's test at a pre-set alpha of 0.05. Analysis of variance showed no statistically significant difference (p > 0.05) among the groups G1a (25.44 ± 2.35) and G1b (23.62 ± 3.48), G2a (11.77 ± 2.67) and G2b (9.93 ± 3.37). Fractures were observed at the interface between the dentin and the resin in all groups. The Er,Cr:YSGG laser irradiation did not influence on the bond strength of the resin cements and the etch-and-rinse resin cement had better results on bond strength than self-adhesive resin cement.

Influence of surface sealant on the translucency of composite resin: effect of immersion time and immersion media

This study evaluated the effect of surface sealant on the translucency of composite resin immersed in different solutions. The study involved the following materials: Charisma, Fortify and coffee, Coca-Cola®, tea and artificial saliva as solutions. Sixty-four specimens (n = 8) were manufactured and immersed in artificial saliva at 37 ± 1 °C. Samples were immersed in the solutions for three times a day and re-immersed in artificial saliva until the translucency readings. The measurements were carried out at nine times: T1 - 24 hours after specimen preparation, T2 - 24 hours after immersion in the solutions, T3 - 48 hours and T4 to T9 - 7, 14, 21, 30, 60 and 90 days, respectively, after immersion. The translucency values were measured using a JOUAN device. The results were subjected to ANOVA and Tukey's test at 5%. The surface sealant was not able to protect the composite resin against staining, the coffee showed the strongest staining action, followed by tea and regarding immersion time, a significant alteration was noted in the translucency of composite resin after 21 days.

Biologia reprodutiva de populações de Ocimum selloi Benth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bottom-up and top-down effects in a pre-dispersal seed predation system: are non-predated seeds damaged?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise epidemiológica dos acidentes com material biológico registrados no Centro de Referência em Saúde do Trabalhador - Londrina-PR

OBJETIVO: Analisar a distribuição dos acidentes de trabalho com exposição a material biológico das fichas de notificação registradas no Centro de Referência de Saúde do Trabalhador de Londrina, traçando um perfil dos profissionais acidentados. MÉTODOS: Trata-se de um estudo retrospectivo descritivo, com abordagem quantitativa, realizado através de um levantamento nas 253 fichas de notificação de acidentes com material biológico que foram encaminhadas das instituições de saúde da área de abrangência ao Centro de Referência em Saúde do Trabalhador do município de Londrina-PR, no período de janeiro a dezembro de 2006. Os dados foram processados e tabulados eletronicamente, utilizando-se o programa Epi Info, de domínio público. RESULTADOS: Das 253 fichas de notificação de acidentes com material biológico analisadas, verificou-se que 92,5% foram causados por objetos perfuro-cortantes e 39,5% ocorreram em auxiliares de enfermagem. Constatou-se também que 73,5% eram do sexo feminino, 24,1% ocorreram em Unidades Básicas de Saúde, 74,3% encontravam-se com situação vacinal para Hepatite B atualizada e 49,8% ocorreram na rede pública de saúde. CONCLUSÃO: Com o levantamento do perfil dos profissionais acidentados com exposição a material biológico, o CEREST Londrina identificou que a profissão mais atingida foram os auxiliares de enfermagem, as mulheres, e que grande parte dos acidentes ocorreram nas UBSs com material perfuro-cortante. Mostrou-se que coletores de lixo passaram a fazer parte das profissões envolvidas nos acidentes.

Infection levels of Austrodiplostomum compactum (Digenea, Diplostomidae) metacercariae in Plagioscion squamosissimus (Teleostei, Sciaenidae) from the Nova Avanhandava reservoir, São Paulo State, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Protective effects of yacon (Smallanthus sonchifolius) intake on experimental colon carcinogenesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pterygosomatidae and Trombiculidae mites infesting Tropidurus hispidus (Spix, 1825) (Tropiduridae) lizards in northeastern Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Exotic snakes in São Paulo City, southeastern Brazil: Why xenophobia ?

Introduced exotic species cause environmental changes and threat public health in target sites. Illegal trade has enhanced this problem. To first report these risks in Brazil, exotic snakes found in São Paulo City (SPC) (23degrees32' S, 46degrees38' W), southeastern Brazil, and sent to Instituto Butantan between 1995 and 2000, were listed and characterized by their biological attributes. Seventy-six individuals of sixteen alien species were collected. Euriecians snakes, mainly booids, were predominant. Using multivariate techniques, their ecological niches were compared to those of 26 native species, as a way to point out the resource's availability. To evaluate the potential of successful implantation, two species absent in SPC and considered as problem snakes are included in these analyses: the brown treesnake Boiga irregularis and the habu Trimeresurus flavoviridis. There were niche similarities between these pest snakes, exotic booids and native viperids largely due to the similarities in the chosen prey (mammals), diel activity (nocturnal), color pattern (variegated) and body size (medium to large). To avoid predictable undesirable effects of implanted pest snakes, traffic control and punishment should be improved, as well as parallel environmental education programs.

Growth rate of the crab Dissodactylus crinitichelis Moreira, 1901 (Crustacea : Decapoda : Pinnotheroidea) under laboratory conditions

The goal of the present study was to investigate the growth rate of the crab Dissodactylus crinitiehelis, its molt increments, and the duration of the intermolt intervals under laboratory conditions, focusing on differences between sexes and between juvenile and adult phases. Crabs were collected at Flamengo Beach, Ubatuba, São Paulo State, Brazil, by scuba divers. In the laboratory, individuals were maintained in isolation and fed nauplii of Artemia sp. daily. The sex and carapace width of exuviae and dead crabs were recorded. During the juvenile phase, mean growth was 11.8 +/- 2.7% in males and 11.2 +/- 3.6% in females, with their respective intermolt intervals 25.4 +/- 9.2 and 26.4 +/- 8.3 d (mean +/- SD). After reaching morphological sexual maturity, the intermolt intervals increased to 33.4 10.1 d in males and 32.7 +/- 10.4 d in females, and the growth rates of both sexes slowed to 6.4 +/- 1.9% in males and 5.7 +/- 1.6% in females. There was a significant decrease in molt increment and an increase in intermolt intervals associated with the maturation from juveniles to adults, evidencing differential energy allocation during the last phase of ontogeny.