Investigating the level of awareness of building assessment tools in the construction industry of Botswana

Environmental building assessment tools have been developed to measure how well or poorly a building is performing, or likely to perform, against a declared set of criteria, or environmental considerations, in order to achieve sustainability principles. Knowledge of environmental building assessment tools is therefore important for successful design and construction of environmentally friendly buildings for countries. The purpose of the research is to investigate the knowledge and level of awareness of environmental building assessment tools among industry practitioners in Botswana. One hundred and seven paper-based questionnaires were delivered to industry practitioners, including architects, engineers, quantity surveyors, real estate developers and academics. Users were asked what they know about building assessment, whether they have used any building assessment tool in the past, and what they perceive as possible barriers to the implementation of environmental building assessment tools in Botswana. Sixty five were returned and statistical analysis, using IBM SPSS V19 software, was used for analysis. Almost 85 per cent of respondents indicate that they are extremely or moderately aware of environmental design. Furthermore, the results indicate that 32 per cent of respondents have gone through formal training, which suggests ‘reasonable knowledge’. This however does not correspond with the use of the tools on the ground as 69 per cent of practitioners report never to have used any environmental building assessment tool in any project. The study highlights the need to develop an assessment tool for Botswana to enhance knowledge and further improve the level of awareness of environmental issues relating to building design and construction.

Computational fluid dynamics modelling of the air movement in an environmental test chamber with a respiring manikin

In recent years, computational fluid dynamics (CFD) has been widely used as a method of simulating airflow and addressing indoor environment problems. The complexity of airflows within the indoor environment would make experimental investigation difficult to undertake and also imposes significant challenges on turbulence modelling for flow prediction. This research examines through CFD visualization how air is distributed within a room. Measurements of air temperature and air velocity have been performed at a number of points in an environmental test chamber with a human occupant. To complement the experimental results, CFD simulations were carried out and the results enabled detailed analysis and visualization of spatial distribution of airflow patterns and the effect of different parameters to be predicted. The results demonstrate the complexity of modelling human exhalation within a ventilated enclosure and shed some light into how to achieve more realistic predictions of the airflow within an occupied enclosure.

Love of reading: the evaluation of KidsREAD programme in Singapore

In Singapore about 20% of families are considered to be socio-economically disadvantaged. Children from these families have been identified as having reading difficulties when they enter primary school. Recognizing that children from these families have limited access to reading materials, the National Library Board, in partnership with local community clubs and family service centres, has established the KidsREAD literacy programme where volunteers, mostly university and college students, help children between 4 and 8 years of age overcome some of their reading problems. The KidsREAD clubs aim to “promote the love of reading and cultivate good reading habits among all young Singaporeans, in particular children from low-income families” (National Library Board, 2005). This paper presents an evaluation of the KidsREAD clubs with regard to children’s attitudes towards reading. It explores the differences in children’s reading attitudes at the beginning of the programme and half way through the programme. The study was carried out in three representative clubs. This paper evaluates the attitudes of 65 children towards the clubs and the activities conducted at the clubs. It outlines the children’s beliefs about reading and the extent to which they value reading. It further explores how much KidsREAD clubs have influenced their attitudes towards reading in general and their enjoyment of reading in particular.

Perspectives on the specification of Building Integrated Photovoltaic (BIPV) technology in construction projects

Innovative, low carbon technologies are already available for use in the construction of buildings, but the impact of their specification on construction projects is unclear. This exploratory research identifies issues which arise following the specification of BIPV in non-residential construction projects. Rather than treating the inclusion of a new technology as a technical problem, the research explores the issue from a socio-technical perspective to understand the accommodations which the project team makes and their effect on the building and the technology. The paper is part of a larger research project which uses a Social Construction of Technology Approach (SCOT) to explore the accommodations made to working practices and design when Building Integrated PhotoVoltaic (BIPV) technology is introduced. The approach explores how the requirements of the technology from different groups of actors (Relevant Social Groups or RSG's) give rise to problems and create solutions. As such it rejects the notion of a rational linear view of innovation diffusion; instead it suggests that the variety and composition of the Relevant Social Groups set the agenda for problem solving and solutions as the project progresses. The research explores the experiences of three people who have extensive histories of involvement with BIPV in construction, looks at how SCOT can inform our understanding of the issues involved and identifies themes and issues in the specification of BIPV on construction projects. A key finding concerns the alignment of inflection points at which interviewees have found themselves changing from one RSG to another as new problems and solutions are identified. The points at which they change RSG often occurred at points which mirror conventional construction categories (in terms of project specification, tender, design and construction).

The evolution of jumping performance in anurans: morphological correlates and ecological implications

We investigated the evolution of anuran locomotor performance and its morphological correlates as a function of habitat use and lifestyles. We reanalysed a subset of the data reported by Zug (Smithson. Contrib. Zool. 1978; 276: 1-31) employing phylogenetically explicit statistical methods (n = 56 species), and assembled morphological data on the ratio between hind-limb length and snout-vent length (SVL) from the literature and museum specimens for a large subgroup of the species from the original paper (n = 43 species). Analyses using independent contrasts revealed that classifying anurans into terrestrial, semi-aquatic, and arboreal categories cannot distinguish between the effects of phylogeny and ecological diversification in anuran locomotor performance. However, a more refined classification subdividing terrestrial species into `fossorials` and `non-fossorials`, and arboreal species into `open canopy`, `low canopy` and `high canopy`, suggests that part of the variation in locomotor performance and in hind-limb morphology can be attributed to ecological diversification. In particular, fossorial species had significantly lower jumping performances and shorter hind limbs than other species after controlling for SVL, illustrating how the trade-off between burrowing efficiency and jumping performance has resulted in morphological specialization in this group.

Variation of System Performance with Design and Climate for Combisystems in Sweden

In Sweden, 90% of the solar heating systems are solar domestic hot water and heating systems (SDHW&H), so called combisystems. These generally supply most of the domestic hot water needs during the summer and have enough capacity to supply some energy to the heating system during spring and autumn. This paper describes a standard Swedish combisystem and how the output from it varies with heating load, climate within Sweden, and how it can be increased with improved system design. A base case is defined using the standard combi- system, a modern Swedish single family house and the climate of Stockholm. Using the simulation program Trnsys, parametric studies have been performed on the base case and improved system designs. The solar fraction could be increased from 17.1% for the base case to 22.6% for the best system design, given the same system size, collector type and load. A short analysis of the costs of changed system design is given, showing that payback times for additional investment are from 5-8 years. Measurements on system components in the laboratory have been used to verify the simulation models used. More work is being carried out in order to find even better system designs, and further improvements in system performance are expected.

Carl Maria von Weber’s Overture to Oberon: A History of Recorded Performance

My research examines the recorded performance history of the Overture to Weber’s Oberon in light of these aesthetic goals. I have charted changes in performance practice trends, including in timing, tempo fluctuation, rhythmic accuracy and ensemble, and the use of portamento. The twenty recordings studied that I surveyed span nearly seventy-five years, and include many of the 20th century’s most prominent conductors and orchestras, including groups from Communist Russia, both pre-World War II and post-World War II continental Europe, the British Isles, and the United States.8 Though by no means comprehensive, my selections encompass a diverse sampling of surviving recordings, ensuring a large enough sample size to reflect general trends in the performance of Weber’s masterpiece. My research and analysis confirms the conventional view of a move toward more accurate—but also more cautious, uniform, and inexpressive— performances. Surprisingly, however, this analysis also suggests that we are on the cusp of a new era in orchestra performance practice, one that shares many of the values of the earlier recorded performances. While maintaining today’s high standards of execution, modern performances now look to regain many of the past’s expressive qualities, doing so in sometimes surprising ways.

The stakeholders‟ involvement in the process of building and maintaining a destination brand

A destination is a place that attracts visitors for a temporary stay to participate in tourism related activities or non- activities. Globalization, the increased number of travelers and the increased buying power have increased the competition between the destinations and the destinations have become more substitutable. It has been agreed that destinations can be branded as well as products and to be competitive it is getting common to brand destinations. Destination Marketing Organizations (DMOs) are responsible for the marketing of an identifiable destination. The purpose of this study is to present an exploratory study of how a destination marketing organization creates and builds a strong destination brand and how the stakeholders have been involved in the process. The study is done with a qualitative case study approach. The case study was chosen as the research method to make a detailed and intensive analysis of the research objective, in this case the destination brand of Brazil and its stakeholders.

O contrato de gestão como um instrumento de modernização do estado

Este estudo discute processo de implantação do contrato de gestão na Administração Pública brasileira particularmente, experiência iniciada pelo Governo do Estado de São Paulo, em 1991. objetivo principal do contrato de gestão concentrar controle governamental sobre os resultados das entidades, que possibilita simplificação gradativa das estruturas normativas introdução de um sistema de sanções recompensas. Este sistema pode viabilizar implantação de novas formas de avaliação de desempenho contribuir para aumentar produtividade no setor público. contrato de gestão um instrumento que incentiva diálogo parceria torna transparentes as intenções orientações entre as partes contratantes. Além disso, pode funcionar como um instrumento de racionalização administrativa comunicação interna para própria instituição. existência de um planejamento prévio uma das pré-condições necessárias ao processo de implantação do contrato de gestão. As metas objetivos devem ser especificadas de forma precisa, clara sem ambigüidade, refletir as condições capacidades reais da entidade. Alguns problemas podem ser evitados, se for previsto um estágio inicial de preparação dos técnicos responsáveis pela implantação acompanhamento dos contratos, nos conceitos instrumentos indispensáveis ao processo. fundamental que seja previsto também, um período de negociação do apoio dos principais decisores formadores de opinião, de conscientização preparação do corpo funcional das entidades.

The best are never normal : exploring the distribution of firm performance

Competitive Strategy literature predicts three different mechanisms of performance generation, thus distinguishing between firms that have competitive advantage, firms that have competitive disadvantage or firms that have neither. Nonetheless, previous works in the field have fitted a single normal distribution to model firm performance. Here, we develop a new approach that distinguishes among performance generating mechanisms and allows the identification of firms with competitive advantage or disadvantage. Theorizing on the positive feedback loops by which firms with competitive advantage have facilitated access to acquire new resources, we proposed a distribution we believe data on firm performance should follow. We illustrate our model by assessing its fit to data on firm performance, addressing its theoretical implications and comparing it to previous works.

Apresentação multimédia com garantias de qualidade de serviço: QoSMedEval (Quality of Service Media Evaluation Tool)

Orientador: Paulo Nazareno Maia Sampaio

Extraction of Building Roof Contours From LiDAR Data Using a Markov-Random-Field-Based Approach

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance characteristics of high performance liquid chromatography, first order derivative UV spectrophotometry and bioassay for fluconazole determination in capsules

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)