Endovascular Versus Open Abdominal Aortic Aneurysm: Best Decision.

Since the first implantation of an endograft in 1991, endovascular aneurysm repair (EVAR) rapidly gained recognition. Historical trials showed lower early mortality rates but these results were not maintained beyond 4 years. Despite newer-generation devices, higher rates of reintervention are associated with EVAR during follow-up. Therefore, the best therapeutic decision relies on many parameters that the physician has to take in consideration. Patient's preferences and characteristics are important, especially age and life expectancy besides health status. Aneurysmal anatomical conditions remain probably the most predictive factor that should be carefully evaluated to offer the best treatment. Unfavorable anatomy has been observed to be associated with more complications especially endoleak, leading to more re-interventions and higher risk of late mortality. Nevertheless, technological advances have made surgeons move forward beyond the set barriers. Thus, more endografts are implanted outside the instructions for use despite excellent results after open repair especially in low-risk patients. When debating about AAA repair, some other crucial points should be analysed. It has been shown that strict surveillance is mandatory after EVAR to offer durable results and prevent late rupture. Such program is associated with additional costs and with increased risk of radiation. Moreover, a risk of loss of renal function exists when repetitive imaging and secondary procedures are required. The aim of this article is to review the data associated with abdominal aortic aneurysm and its treatment in order to establish selection criteria to decide between open or endovascular repair.

Rockfall susceptibility assessment and remote geological mapping with LiDAR point clouds

Characterizing the geological features and structures in three dimensions over inaccessible rock cliffs is needed to assess natural hazards such as rockfalls and rockslides and also to perform investigations aimed at mapping geological contacts and building stratigraphy and fold models. Indeed, the detailed 3D data, such as LiDAR point clouds, allow to study accurately the hazard processes and the structure of geologic features, in particular in vertical and overhanging rock slopes. Thus, 3D geological models have a great potential of being applied to a wide range of geological investigations both in research and applied geology projects, such as mines, tunnels and reservoirs. Recent development of ground-based remote sensing techniques (LiDAR, photogrammetry and multispectral / hyperspectral images) are revolutionizing the acquisition of morphological and geological information. As a consequence, there is a great potential for improving the modeling of geological bodies as well as failure mechanisms and stability conditions by integrating detailed remote data. During the past ten years several large rockfall events occurred along important transportation corridors where millions of people travel every year (Switzerland: Gotthard motorway and railway; Canada: Sea to sky highway between Vancouver and Whistler). These events show that there is still a lack of knowledge concerning the detection of potential rockfalls, making mountain residential settlements and roads highly risky. It is necessary to understand the main factors that destabilize rocky outcrops even if inventories are lacking and if no clear morphological evidences of rockfall activity are observed. In order to increase the possibilities of forecasting potential future landslides, it is crucial to understand the evolution of rock slope stability. Defining the areas theoretically most prone to rockfalls can be particularly useful to simulate trajectory profiles and to generate hazard maps, which are the basis for land use planning in mountainous regions. The most important questions to address in order to assess rockfall hazard are: Where are the most probable sources for future rockfalls located? What are the frequencies of occurrence of these rockfalls? I characterized the fracturing patterns in the field and with LiDAR point clouds. Afterwards, I developed a model to compute the failure mechanisms on terrestrial point clouds in order to assess the susceptibility to rockfalls at the cliff scale. Similar procedures were already available to evaluate the susceptibility to rockfalls based on aerial digital elevation models. This new model gives the possibility to detect the most susceptible rockfall sources with unprecented detail in the vertical and overhanging areas. The results of the computation of the most probable rockfall source areas in granitic cliffs of Yosemite Valley and Mont-Blanc massif were then compared to the inventoried rockfall events to validate the calculation methods. Yosemite Valley was chosen as a test area because it has a particularly strong rockfall activity (about one rockfall every week) which leads to a high rockfall hazard. The west face of the Dru was also chosen for the relevant rockfall activity and especially because it was affected by some of the largest rockfalls that occurred in the Alps during the last 10 years. Moreover, both areas were suitable because of their huge vertical and overhanging cliffs that are difficult to study with classical methods. Limit equilibrium models have been applied to several case studies to evaluate the effects of different parameters on the stability of rockslope areas. The impact of the degradation of rockbridges on the stability of large compartments in the west face of the Dru was assessed using finite element modeling. In particular I conducted a back-analysis of the large rockfall event of 2005 (265'000 m3) by integrating field observations of joint conditions, characteristics of fracturing pattern and results of geomechanical tests on the intact rock. These analyses improved our understanding of the factors that influence the stability of rock compartments and were used to define the most probable future rockfall volumes at the Dru. Terrestrial laser scanning point clouds were also successfully employed to perform geological mapping in 3D, using the intensity of the backscattered signal. Another technique to obtain vertical geological maps is combining triangulated TLS mesh with 2D geological maps. At El Capitan (Yosemite Valley) we built a georeferenced vertical map of the main plutonio rocks that was used to investigate the reasons for preferential rockwall retreat rate. Additional efforts to characterize the erosion rate were made at Monte Generoso (Ticino, southern Switzerland) where I attempted to improve the estimation of long term erosion by taking into account also the volumes of the unstable rock compartments. Eventually, the following points summarize the main out puts of my research: The new model to compute the failure mechanisms and the rockfall susceptibility with 3D point clouds allows to define accurately the most probable rockfall source areas at the cliff scale. The analysis of the rockbridges at the Dru shows the potential of integrating detailed measurements of the fractures in geomechanical models of rockmass stability. The correction of the LiDAR intensity signal gives the possibility to classify a point cloud according to the rock type and then use this information to model complex geologic structures. The integration of these results, on rockmass fracturing and composition, with existing methods can improve rockfall hazard assessments and enhance the interpretation of the evolution of steep rockslopes. -- La caractérisation de la géologie en 3D pour des parois rocheuses inaccessibles est une étape nécessaire pour évaluer les dangers naturels tels que chutes de blocs et glissements rocheux, mais aussi pour réaliser des modèles stratigraphiques ou de structures plissées. Les modèles géologiques 3D ont un grand potentiel pour être appliqués dans une vaste gamme de travaux géologiques dans le domaine de la recherche, mais aussi dans des projets appliqués comme les mines, les tunnels ou les réservoirs. Les développements récents des outils de télédétection terrestre (LiDAR, photogrammétrie et imagerie multispectrale / hyperspectrale) sont en train de révolutionner l'acquisition d'informations géomorphologiques et géologiques. Par conséquence, il y a un grand potentiel d'amélioration pour la modélisation d'objets géologiques, ainsi que des mécanismes de rupture et des conditions de stabilité, en intégrant des données détaillées acquises à distance. Pour augmenter les possibilités de prévoir les éboulements futurs, il est fondamental de comprendre l'évolution actuelle de la stabilité des parois rocheuses. Définir les zones qui sont théoriquement plus propices aux chutes de blocs peut être très utile pour simuler les trajectoires de propagation des blocs et pour réaliser des cartes de danger, qui constituent la base de l'aménagement du territoire dans les régions de montagne. Les questions plus importantes à résoudre pour estimer le danger de chutes de blocs sont : Où se situent les sources plus probables pour les chutes de blocs et éboulement futurs ? Avec quelle fréquence vont se produire ces événements ? Donc, j'ai caractérisé les réseaux de fractures sur le terrain et avec des nuages de points LiDAR. Ensuite, j'ai développé un modèle pour calculer les mécanismes de rupture directement sur les nuages de points pour pouvoir évaluer la susceptibilité au déclenchement de chutes de blocs à l'échelle de la paroi. Les zones sources de chutes de blocs les plus probables dans les parois granitiques de la vallée de Yosemite et du massif du Mont-Blanc ont été calculées et ensuite comparés aux inventaires des événements pour vérifier les méthodes. Des modèles d'équilibre limite ont été appliqués à plusieurs cas d'études pour évaluer les effets de différents paramètres sur la stabilité des parois. L'impact de la dégradation des ponts rocheux sur la stabilité de grands compartiments de roche dans la paroi ouest du Petit Dru a été évalué en utilisant la modélisation par éléments finis. En particulier j'ai analysé le grand éboulement de 2005 (265'000 m3), qui a emporté l'entier du pilier sud-ouest. Dans le modèle j'ai intégré des observations des conditions des joints, les caractéristiques du réseau de fractures et les résultats de tests géoméchaniques sur la roche intacte. Ces analyses ont amélioré l'estimation des paramètres qui influencent la stabilité des compartiments rocheux et ont servi pour définir des volumes probables pour des éboulements futurs. Les nuages de points obtenus avec le scanner laser terrestre ont été utilisés avec succès aussi pour produire des cartes géologiques en 3D, en utilisant l'intensité du signal réfléchi. Une autre technique pour obtenir des cartes géologiques des zones verticales consiste à combiner un maillage LiDAR avec une carte géologique en 2D. A El Capitan (Yosemite Valley) nous avons pu géoréferencer une carte verticale des principales roches plutoniques que j'ai utilisé ensuite pour étudier les raisons d'une érosion préférentielle de certaines zones de la paroi. D'autres efforts pour quantifier le taux d'érosion ont été effectués au Monte Generoso (Ticino, Suisse) où j'ai essayé d'améliorer l'estimation de l'érosion au long terme en prenant en compte les volumes des compartiments rocheux instables. L'intégration de ces résultats, sur la fracturation et la composition de l'amas rocheux, avec les méthodes existantes permet d'améliorer la prise en compte de l'aléa chute de pierres et éboulements et augmente les possibilités d'interprétation de l'évolution des parois rocheuses.

Dynamique du peuplement et activités agro-pastorales durant l’âge du Bronze dans les massifs du haut Champsaur et de l’Argentiérois

Des programmes de recherche pluridisciplinaires sur l’occupation du sol et le pastoralisme de la Préhistoire au Moyen Âge dans le sud du massif alpin sont menés, depuis 1998, sur les massifs du Haut Champsaur, de Freissinières et de l’Argentièrois (Hautes-Alpes). Des dix phases d’occupation et d'activité agropastorale mises en évidence (prospections pédestres et fouilles), entre 1600 et 2700 m d’altitude, trois se distinguent: la fin du Néolithique, l’âge du Bronze et la période médiévale. Au travers des premières données archéologiques et environnementales, cet article présente, depuis le milieu du IIIe millénaire au début du Ier millénaire, les grandes caractéristiques de l’occupation du sol mais aussi l’originalité et l’importance de l’activité humaine dans cette zone alpine. La fin du Néolithique et l’âge du Bronze correspondent à une multiplication des gisements archéologiques marquant de façon évidente une rupture dans la gestion de l'espace montagnard. Les paysages sont largement façonnés par les activités humaines et l’entretien des terres cultivées, des prairies et des alpages, paraît continu. À la lumière des données de terrain, l’une des évolutions qui apparaît sur les sites d’altitude durant cette période concerne l’apparition de structures pastorales bâties entre 2 067 et 2 303 m d’altitude (datation 14C).

Improving anterior deltoid activity in a musculoskeletal shoulder model - an analysis of the torque-feasible space at the sternoclavicular joint.

Modelling the shoulder's musculature is challenging given its mechanical and geometric complexity. The use of the ideal fibre model to represent a muscle's line of action cannot always faithfully represent the mechanical effect of each muscle, leading to considerable differences between model-estimated and in vivo measured muscle activity. While the musculo-tendon force coordination problem has been extensively analysed in terms of the cost function, only few works have investigated the existence and sensitivity of solutions to fibre topology. The goal of this paper is to present an analysis of the solution set using the concepts of torque-feasible space (TFS) and wrench-feasible space (WFS) from cable-driven robotics. A shoulder model is presented and a simple musculo-tendon force coordination problem is defined. The ideal fibre model for representing muscles is reviewed and the TFS and WFS are defined, leading to the necessary and sufficient conditions for the existence of a solution. The shoulder model's TFS is analysed to explain the lack of anterior deltoid (DLTa) activity. Based on the analysis, a modification of the model's muscle fibre geometry is proposed. The performance with and without the modification is assessed by solving the musculo-tendon force coordination problem for quasi-static abduction in the scapular plane. After the proposed modification, the DLTa reaches 20% of activation.

34

In the past 2 decades, there has been an increase in both basic science research detailing the anatomy and biomechanics of the native posterior cruciate ligament (PCL) and outcome studies evaluating manage- ment of the ruptured PCL. While the methodology of the latter continues to improve, results based on the current level of evidence must be interpreted cautiously (18). The focus of many recent studies has been double-bundle versus single-bundle reconstruction techniques. The theoretical advantage goes to double-bundle techniques, but a clinical difference in outcome has not been consistently demonstrated (8,17). Some biomechanical studies have reported improved control of posterior laxity with double-bundle reconstruc- tion; however, results appear to be more dependent on tunnel position and graft tensioning (13). In acute isolated symptomatic PCL injuries in which the posteromedial bundle and the meniscofemoral ligament remain intact, a single-bundle augmentation procedure may be the preferred surgical technique. In more complex PCL ruptures with associated injuries involving the posterolateral structures (PLS) or medial collateral ligament, more benefit may be derived from double-bundle reconstruction. Again, cadaveric testing of double-bundle PCL reconstruction has not consistently outperformed single-bundle techniques in combined PCL/PLS injury (3). Multi-ligamentous injuries are commonly associated with PCL rupture (15), and their management should be considered carefully in the decision to reconstruct one or both of the functionally dis- tinct PCL bundles. However, the technical complexity of double-bundle reconstruction, the longer surgical time required, as well as the inconclusive clinical outcome are all factors that must be weighed carefully.

Spontaneous perforation of gallbladder with intrahepatic biloma formation: sonographic signs and correlation with computed tomography

Spontaneous perforation of gallbladder is a severe and infrequent complication of acute cholecystitis that requires early and accurate diagnosis. Concomitant development of intrahepatic collections is rarely observed in such cases. The present report emphasizes the relevance of imaging studies in this setting, describing the typical sonographic and tomographic findings for the diagnosis of such condition.

Synovial chondromatosis of the shoulder: imaging findings

Synovial chondromatosis is a benign condition characterized by synovial proliferation and metaplasia, with development of cartilaginous or osteocartilaginous nodules within a joint, bursa or tendon sheath. In the shoulder, synovial osteochondromatosis may occur within the glenohumeral joint and its recesses (including the tendon sheath of the biceps long head), and in the subacromial-deltoid bursa. Such condition can be identified either by radiography, ultrasonography or magnetic resonance imaging, showing typical features according to each method. Radiography commonly shows ring-shaped calcified cartilages and periarticular soft tissues swelling with erosion of joint margins. Ultrasonography demonstrates hypoechogenic cartilaginous nodules with progressive increase in echogenicity as they become calcified, with development of posterior acoustic shadow in case of ossification. Besides identifying cartilaginous nodules, magnetic resonance imaging can also demonstrate the degree of synovial proliferation. The present study is aimed at describing the imaging findings of this entity in the shoulder.

Retrospective study of sonographic findings in bone involvement associated with rotator cuff calcific tendinopathy: preliminary results of a case series

Abstract Objective: The present study was aimed at investigating bone involvement secondary to rotator cuff calcific tendonitis at ultrasonography. Materials and Methods: Retrospective study of a case series. The authors reviewed shoulder ultrasonography reports of 141 patients diagnosed with rotator cuff calcific tendonitis, collected from the computer-based data records of their institution over a four-year period. Imaging findings were retrospectively and consensually analyzed by two experienced musculoskeletal radiologists looking for bone involvement associated with calcific tendonitis. Only the cases confirmed by computed tomography were considered for descriptive analysis. Results: Sonographic findings of calcific tendinopathy with bone involvement were observed in 7/141 (~ 5%) patients (mean age, 50.9 years; age range, 42-58 years; 42% female). Cortical bone erosion adjacent to tendon calcification was the most common finding, observed in 7/7 cases. Signs of intraosseous migration were found in 3/7 cases, and subcortical cysts in 2/7 cases. The findings were confirmed by computed tomography. Calcifications associated with bone abnormalities showed no acoustic shadowing at ultrasonography, favoring the hypothesis of resorption phase of the disease. Conclusion: Preliminary results of the present study suggest that ultrasonography can identify bone abnormalities secondary to rotator cuff calcific tendinopathy, particularly the presence of cortical bone erosion.

« En fonction de la prise de Méthadone® maternelle peut-on prévoir l'outcome et l'adaptation néonatale, ainsi que la survenue d'un sevrage néonatal, sa durée et le développement à court terme de l'enfant ? »

Objectif : Abstract Le but de cette étude consiste à étudier un éventuel lien entre le dosage du traitement de substitution par la Méthadone® pendant la grossesse et les issues obstétricales (rupture prématurée des membranes, menace d'accouchement prématuré), ainsi que néonatales (telles que le retard de croissance intrautérin, l'adaptation néonatale, le sevrage néonatal aux opiacés et l'hypoglycémie néonatale). Nous évaluerons également le développement psychomoteur de l'enfant à court terme (jusqu'à 18 mois de vie) via l'échelle de Griffiths. Méthode : Il s'agit d'une étude rétrospective sur 50 femmes enceintes sous Méthadone® suivies au CHUV et ayant accouché entre les années 2000 et 2010, ainsi que sur leurs enfants suivis par l'Unité du Développement du CHUV et évalués moyennant l'échelle du développement psychomoteur appelée Griffiths (il s'agit de 26 enfants entre 6-9 mois et 20 entre 18-19 mois). Pour ce faire, nous avons parcouru les différentes archives du CHUV (informatiques et papiers) dans un premier temps. Ces données ont été ensuite saisies dans un tableau Excel avant d'être analysées via STATA. Résumé des résultats : En fonction du dosage de la Méthadone®, 27% (dose plus faible) à 47 % (dose plus élevée) des femmes de notre collectif accouchent prématurément (p = 0.139). 48 % de leurs nouveau-nés présentent un retard de croissance intra-utérin (RCIU). Ce risque est d'autant plus élevé que la Méthadone est faiblement dosée (p = 0.073). Inversement au RCIU, le risque d'hypoglycémie néonatale croît avec la dose maternelle de Méthadone® (p = 0.148). La survenue du syndrome de sevrage néonatal aux opiacés ainsi que sa durée sont significativement plus importantes lorsque le dosage maternel de Méthadone est élevé (p = 0.022 ; p = 0.0118) ou lors de la prise concomitante de benzodiazépines (p = 0.004 ; p = 0.0129). La prise d'autres substances illicites a elle aussi tendance à prolonger le sevrage (p = 0.065). Entre 6-9 mois de vie, il y a plus de microcéphalie (périmètre crânien inférieur au P10) lorsque les enfants reçoivent une dose plus faible in utéro (p = 0.005). Le développement psychomoteur est quant à lui plus favorable lorsque le traitement de substitution est fortement dosé (p = 0.039) et que l'enfant vit chez sa mère biologique (p = 0.050) ou bénéficie d'un contact maternel régulier (p = 0.008). L'effet du dosage de la Méthadone® (p = 0.683) et du lieu de vie (p = 0.211) sur le développement psychomoteur ont néanmoins tendance à s'estomper entre 18-19 mois de vie. Conclusions : Bien qu'un traitement de substitution par la Méthadone hautement dosé augmente la survenue et la durée du syndrome de sevrage néonatal aux opiacés, il y a maintenant des indices pour un meilleur outcome de l'enfant lorsque la substitution est importante (moins de RCIU, de microcéphalie et un développement psychomoteur plus favorable). A propos de l'issue néonatale, tous les enfants nés de mères toxicodépendantes semblent être à risque d'hypoglycémie néonatale. Implications pratiques : Il serait désormais préférable d'augmenter les doses de substitution des futures mères toxicomanes d'autant plus lorsque celles-ci le réclament et tous leurs enfants devraient bénéficier d'une alimentation précoce et de contrôles glycémiques, même s'ils sont eutrophiques.

"Role of long non-coing RNAs in the stressed heart". Wisper : a novel cardiac fibroblast-enriched IncRNA that modulate fibrosis in the failing heart

LncRNAs are transcripts greater than 200 nucleotides in length with no apparent coding potential. They exert important regulatory functions in the genome. Their role in cardiac fibrosis is however unexplored. To identify IncRNAs that could modulate cardiac fibrosis, we profiled the long non-coding transcriptome in the infarcted mouse heart, and identified 1500 novel IncRNAs. These IncRNAs have unique characteristics such as high tissue and cell type specificity. Their expression is highly correlated with parameters of cardiac dimensions and function. The majority of these novel IncRNAs are conserved in human. Importantly, human IncRNAs appear to be differentially expressed in heart disease. Using a computational pipeline, we identified a super-enhancer-associated IncRNA, which is dynamically expressed after myocardial infarction. We named this particular transcript Wisper for «Wisp2 super-enhancer- derived IncRNA ». Interestingly, Wisper expression is overexpressed in cardiac fibroblasts as compared to cardiomyocytes or to fibroblasts isolated from other organs than the heart. The importance of Wisper in the biology of fibroblasts was demonstrated in knockdown experiments. Differentiation of cardiac fibroblast into myofibroblasts in vitro is significantly impaired upon Wisper knockdown. Wisper downregulation in cardiac fibroblasts results in a dramatic reduction of fibrotic gene expression, a diminished cell proliferation and an increase in apoptotic cell death. In vivo, depletion of Wisper during the acute phase of the response to infarction is detrimental via increasing the risk of cardiac rupture. On the other hand, Wisper knockdown following infarction in a prevention study reduces fibrosis and preserves cardiac function. Since WISPER is detectable in the human heart, where it is associated with severe cardiac fibrosis, these data suggest that Wisper could represent a novel therapeutic target for limiting the extent of the fibrotic response in the heart. -- Les long ARN non-codants (IncRNAs) sont des ARN de plus de 200 nucléotides qui ne codent pas pour des protéines. Ils exercent d'importantes fonctions dans le génome. Par contre, leur importance dans le développement de la fibrose cardiaque n'a pas été étudiée. Pour identifier des IncRNAs jouant un rôle dans ce processus, le transcriptome non-codant a été étudié dans le coeur de'souris après un infarctus du myocarde. Nous avons découverts 1500 nouveaux IncRNAs. Ces transcrits ont d'uniques caractéristiques. En particulier ils sont extrêmement spécifiques de sous-populations de cellules cardiaques. Par ailleurs, leur expression est remarquablement corrélée avec les paramètres définissant les dimensions du coeur et la fonction cardiaque. La majorité de ces IncRNAs sont conservés chez l'humain. Certains sont modulés dans des pathologies cardiaques. En utilisant une approche bioinformatique, nous avons identifié un IncRNA qui est associé à des séquences amplificatrices et qui est particulièrement enrichi dans les fibroblastes cardiaques. Ce transcrit a été nommé Wisper pour «Wisp2 super-enhancer-derived IncRNA ». L'importance de Wisper dans la biologie des fibroblastes cardiaques est démontrée dans des expériences de déplétion. En l'absence de Wisper, l'expression de protéines impliquées dans le développement de la fibrose est dramatiquement réduite dans les fibroblastes cardiaques. Ceux-ci montrent une prolifération réduite. Le niveau d'apoptose est largement augmenté. In vivo, la déplétion de Wisper pendant la phase aiguë de l'infarctus rehausse le risque de rupture cardiaque. Au contraire, la réduction de l'expression de Wisper pendant la phase chronique diminue la fibrose cardiaque et améliore la fonction du coeur. Puisque Wisper est exprimé dans le coeur humain, ce transcrit représente une nouvelle cible thérapeutique pour limiter la réponse fibrotique dans le coeur.

Conhecimento escolar em química: processo de mediação didática da ciência

xThe aim of this article is to present a contribution of the school knowledge research to Chemistry Teaching. The object of research is school knowledge on physical sciences, considering the existence of a rupture between scientific knowledge and everyday knowledge. The differences between analogies and metaphors and the process of didactic mediation were thoroughly examined. The conclusion is that the process of didactic mediation is built on their own cognitive configurations, which not always make public the private scientific knowledge to certain social groups.

Descomposicion termica del diperoxido de pinacolona (3,6-diterbutil-3,6-dimetil-1,2,4,5-tetraoxaciclohexano) en solución de 2-metoxietanol

The thermal decomposition reaction of pinacolone diperoxide (DPP; 0.02 mol kg-1) in 2-methoxyethanol solution studied in the temperature range of 110.0-150.0 °C, follows a first-order kinetic law up to at least 50% DPP conversion. The organic products observed were pinacolone, methane and tert-butane. A stepwise mechanism of decomposition was proposed where the first step is the homolytic unimolecular rupture of the O-O bond. The activation enthalpy and activation entropy for DPP in 2-methoxyethanol were calculated (deltaH# = 43.8 ± 1.0 kcal mol-1 and deltaS# = 31.9 ± 2.6 cal mol-1K-1) and compared with those obtained in other solvents to evaluate the solvent effect.

Induced maritime accidents

Humanity system of life is highly supported by maritime transport when circa 8 thousand million people require about 8.800 million tons of merchandises by sea, going in some 105.000 merchant ships of over 100 GT, sailing every thinkable dangerous waters 365 days year 24 hours day. All that Enormous activity plus others different factors produce accidents, as is shown in an ascendant 1.7 rate related to ships lost with big number in life, cargoes losses, and pollution. That is why this study pretend to detect causes factors of maritime accidents, to try to reduce them, and with that targetin mind it was tested the new theory of Induced Maritime Accidents, crossing itsproposals with relevant sinister of different times and circumstances, as Andrea Doria, Torrey Canyon, Costa Concordia, among others. Those cases were re evaluated to establish the key points of such theory, as they are the Production Pressure, the Risk Homeostasis, technological advances and the rupture of safety margin. Cases studies gave as result the existence of referred key points, in a manner combined that the chain of events derived to the fatality, and more than that highlights the possibility that been suppressed to acceptable limits the production pressure or the risk homeostasis, a permissible safety margin were been maintained, avoiding catastrophe.

Produção, purificação, clonagem e aplicação de enzimas líticas

Lytic enzymes such as beta-1,3 glucanases, proteases and chitinases are able to hydrolyse, respectively, beta-1,3 glucans, mannoproteins and chitin, as well as the cell walls of many yeast species. Lytic enzymes are useful in a great variety of applications including the preparation of protoplasts; the extraction of proteins, enzymes, pigments and functional carbohydrates; pre-treatment for the mechanical rupture of cells; degradation of residual yeast cell mass for the preparation of animal feed; analysis of the yeast cell wall structure and composition; study of the yeast cell wall synthesis and the control of pathogenic fungi. This review presents the most important aspects with respect to lytic enzymes, especially their production, purification, cloning and application.

The effect of lignin as a natural adhesive on the physico-mechanical properties of Vitis vinifera fiberboards

Lignin was used as a natural adhesive to manufacture Vitis vinifera fiberboards. The fiberboards were produced at laboratory scale by adding powdered lignin to material that had previously been steam-exploded under optimized pretreatment and pressing conditions. The kraft lignin used was washed several times with an acidic solution to eliminate any contaminants and low molecular weight compounds. This research studied the effects of amounts of lignin ranging from 5% to 20% on the properties of Vitis vinifera fiberboards. The fiberboard properties evaluated were density, water resistance in terms of thickness swelling, water absorption, and the mechanical properties in terms of modulus of rupture, modulus of elasticity, and internal bond. Results showed that fiberboards made from Vitis vinifera without lignin addition had weaker mechanical properties. However, the fiberboards obtained using acid-washed kraft lignin as a natural adhesive had good mechanical and water resistance properties that fully satisfied the relevant standard specifications