Improving integrated care in chronic kidney failure patients with a standard-based interoperability framework.

This paper introduces the evaluation report after fostering a Standard-based Interoperability Framework (SIF) between the Virgen del Rocío University Hospital (VRUH) Haemodialysis (HD) Unit and 5 outsourced HD centres in order to improve integrated care by automatically sharing patients' Electronic Health Record (EHR) and lab test reports. A pre-post study was conducted during fourteen months. The number of lab test reports of both emergency and routine nature regarding to 379 outpatients was computed before and after the integration of the SIF. Before fostering SIF, 19.38 lab tests per patient were shared between VRUH and HD centres, 5.52 of them were of emergency nature while 13.85 were routine. After integrating SIF, 17.98 lab tests per patient were shared, 3.82 of them were of emergency nature while 14.16 were routine. The inclusion of a SIF in the HD Integrated Care Process has led to an average reduction of 1.39 (p=0.775) lab test requests per patient, including a reduction of 1.70 (p=0.084) in those of emergency nature, whereas an increase of 0.31 (p=0.062) was observed in routine lab tests. Fostering this strategy has led to the reduction in emergency lab test requests, which implies a potential improvement of the integrated care.

Enterprise Architecture Management Design: Towards Understanding Organizational Contingencies, Design Principles and Effectiveness

Despite the increasing popularity of enterprise architecture management (EAM) in practice, many EAM initiatives either do not fully meet the expected targets or fail. Several frameworks have been suggested as guidelines to EA implementation, but companies seldom follow prescriptive frameworks. Instead, they follow very diverse implementation approaches that depend on their organizational contingencies and the way of adopting and evolving EAM over time. This research strives for a broader understanding of EAM by exploring context-dependent EAM adoption approaches as well as identifying the main EA principles that affect EA effectiveness. Based on two studies, this dissertation aims to address two main questions: (1) EAM design: Which approaches do companies follow when adopting EAM? (2) EA principles and their impact: What impact does EA principles have on EA effectiveness/quality? By utilizing both qualitative and quantitative research methods, this research contributes to exploring different EAM designs in different organizational contingencies as well as using EA principles as an effective means to achieve principle-based EAM design. My research can help companies identify a suitable EAM design that fits their organizational settings and shape their EA through a set of principles.

Curriculum sequencing for an e-learning system based on learning styles

This work shows the use of adaptation techniques involved in an e-learning system that considers students' learning styles and students' knowledge states. The mentioned e-learning system is built on a multiagent framework designed to examine opportunities to improve the teaching and to motivate the students to learn what they want in a user-friendly and assisted environment

The building blocks of international ecological footprint inequality: a regression-based decomposition

This paper performs an empirical Decomposition of International Inequality in Ecological Footprint in order to quantify to what extent explanatory variables such as a country’s affluence, economic structure, demographic characteristics, climate and technology contributed to international differences in terms of natural resource consumption during the period 1993-2007. We use a Regression-Based Inequality Decomposition approach. As a result, the methodology extends qualitatively the results obtained in standard environmental impact regressions as it comprehends further social dimensions of the Sustainable Development concept, i.e. equity within generations. The results obtained point to prioritizing policies that take into account both future and present generations.

Improved earthquake response via simulation and integrated space- and ground-based technologies: the TREMOR proposal

Earthquakes occurring around the world each year cause thousands ofdeaths, millions of dollars in damage to infrastructure, and incalculablehuman suffering. In recent years, satellite technology has been asignificant boon to response efforts following an earthquake and itsafter-effects by providing mobile communications between response teamsand remote sensing of damaged areas to disaster management organizations.In 2007, an international team of students and professionals assembledduring theInternational Space University’s Summer Session Program in Beijing, Chinato examine how satellite and ground-based technology could be betterintegrated to provide an optimised response in the event of an earthquake.The resulting Technology Resources for Earthquake MOnitoring and Response(TREMOR) proposal describes an integrative prototype response system thatwill implement mobile satellite communication hubs providing telephone anddata links between response teams, onsite telemedicine consultation foremergency first-responders, and satellite navigation systems that willlocate and track emergency vehicles and guide search-and-rescue crews. Aprototype earthquake simulation system is also proposed, integratinghistorical data, earthquake precursor data, and local geomatics andinfrastructure information to predict the damage that could occur in theevent of an earthquake. The backbone of these proposals is a comprehensiveeducation and training program to help individuals, communities andgovernments prepare in advance. The TREMOR team recommends thecoordination of these efforts through a centralised, non-governmentalorganization.

Discovering the campus together: a mobile and computer-based learning experience

One of the most relevant difficulties faced by first-year undergraduate students is to settle into the educational environment of universities. This paper presents a case study that proposes a computer-assisted collaborative experience designed to help students in their transition from high school to university. This is done by facilitating their first contact with the campus and its services, the university community, methodologies and activities. The experience combines individual and collaborative activities, conducted in and out of the classroom, structured following the Jigsaw Collaborative Learning Flow Pattern. A specific environment including portable technologies with network and computer applications has been developed to support and facilitate the orchestration of a flow of learning activities into a single integrated learning setting. The result is a Computer-Supported Collaborative Blended Learning scenario, which has been evaluated with first-year university students of the degrees of Software and Audiovisual Engineering within the subject Introduction to Information and Communications Technologies. The findings reveal that the scenario improves significantly students’ interest in their studies and their understanding about the campus and services provided. The environment is also an innovative approach to successfully support the heterogeneous activities conducted by both teachers and students during the scenario. This paper introduces the goals and context of the case study, describes how the technology was employed to conduct the learning scenario, the evaluation methods and the main results of the experience.

Collage, a Collaborative Learning Design Editor Based on Patterns

This paper introduces Collage, a high-level IMS-LD compliant authoring tool that is specialized for CSCL (Computer-Supported Collaborative Learning). Nowadays CSCL is a key trend in elearning since it highlights the importance of social interactions as an essential element of learning. CSCL is an interdisciplinary domain, which demands participatory design techniques that allow teachers to get directly involved in design activities. Developing CSCL designs using LD is a difficult task for teachers since LD is a complex technical specification and modelling collaborative characteristics can be tricky. Collage helps teachers in the process of creating their own potentially effective collaborative Learning Designs by reusing and customizing patterns, according to the requirements of a particular learning situation. These patterns, called Collaborative Learning Flow Patterns (CLFPs), represent best practices that are repetitively used by practitioners when structuring the flow of (collaborative) learning activities. An example of an LD that can be created using Collage is illustrated in the paper. Preliminary evaluation results show that teachers, with experience in CL but without LD knowledge, can successfully design real collaborative learning experiences using Collage.

CLFP intrinsic constraints-based group management of blended learning situations

When applying a Collaborative Learning Flow Pattern (CLFP) to structure sequences of activities in real contexts, one of the tasks is to organize groups of students according to the constraints imposed by the pattern. Sometimes,unexpected events occurring at runtime force this pre-defined distribution to be changed. In such situations, an adjustment of the group structures to be adapted to the new context is needed. If the collaborative pattern is complex, this group redefinitionmight be difficult and time consuming to be carried out in real time. In this context, technology can help on notifying the teacher which incompatibilitiesbetween the actual context and the constraints imposed by the pattern. This chapter presents a flexible solution for supporting teachers in the group organization profiting from the intrinsic constraints defined by a CLFPs codified in IMS Learning Design. A prototype of a web-based tool for the TAPPS and Jigsaw CLFPs and the preliminary results of a controlled user study are alsopresented as a first step towards flexible technological systems to support grouping tasks in this context.

Consumer Satisfaction with Websites of Banks - The Moderating Effect of Consumer Technology Attractiveness

The websites are becoming the firms’ first contact interface with their clients. Hence, understanding customers’ online attitudes and behaviors have been capturing increased research attention. The extant research has pointed customers’ satisfaction with the websites as the main reason for customers’ online behaviors. This research has used mostly variables related to the characteristics of the websites as the predictors of customers’ website satisfaction. However, recent research shows that groups of individuals displaying distinctive characteristics react differently to the same context. Therefore, behavior may be considerably different among groups of customers. In this study, we develop a conceptual model of the influence of individual characteristics on the traditional website quality – website satisfaction relationship. We propose a model based on the construct of consumer technology attractiveness (CTA) to represent the genuine positive propensity of individuals toward technology. We further test the moderating effect of this construct on the commonly used predictors of customer’s website satisfaction using Hierarchical Multiple Regression. The empirical study was based on websites of banks operating in Portuguese market. The commercial banking industry is one of the Portuguese industries that better uses the Internet to establish relationships with clients. Data were collected through an online website satisfaction survey, participated by the lecturers and postgraduate students from four Portuguese Universities and Polytechnic Institutes. Our final sample comprised 276 valid questionnaires. Our study permits to conclude that the most commonly used antecedents of website overall satisfaction are still relevant for analyzing consumer’s satisfaction with the banks websites. We also conclude that CTA has a significant moderating effect on almost all customers’ website satisfaction variables used in the study. This study contributes to highlight the theoretical importance and significant influence of consumers’ personal characteristics on their online behavior. Moreover, for the practitioners, a better understanding of these individual characteristics will assist them in developing customized websites that will meet customers’ expectations. O estudo dos comportamentos dos consumidores em ambientes online tem vindo a ter um crescente interesse, uma vez que os websites estão a transformar-se num importante ponto de contacto entre as empresas e os seus clientes. A satisfação dos clientes com os websites tem sido apontada pela Literatura como o principal condicionante dos comportamentos online dos consumidores. No entanto, a investigação científica tem conseguido provar que grupos de indivíduos com características distintas reagem de forma diferente quando submetidos a contextos idênticos, o que poderá levar a diferenças significativas no comportamento online de consumidores pertencentes a diferentes grupos. Neste estudo desenvolvemos um modelo conceptual que reflecte a influência de características individuais na relação entre a qualidade e a satisfação com os websites. Propomos um modelo assente na atractividade tecnológica do consumidor (CTA), que representa a propensão genuína que os indivíduos possuem em relação à tecnologia. Testamos o efeito moderador deste conceito sobre as variáveis mais utilizadas nos estudos sobre a satisfação dos consumidores com os websites, utilizando a Regressão Múltipla Hierárquica. O estudo empírico baseou-se nos websites dos bancos que operam no mercado português, uma vez que este sector é um dos que melhor utiliza a Internet na sua relação com os clientes. Os dados foram recolhidos através de um questionário sobre satisfação com os websites, colocado online e dirigido a docentes e estudantes de programas de pós-graduações, mestrados e doutoramentos de quatro universidades e instituto politécnico portugueses, tendo resultado numa amostra final de 276 questionários validados estatisticamente. Este estudo permitiu concluir que as variáveis que são mais utilizadas como antecedentes da satisfação dos consumidores com os websites, continuam a ser igualmente válidas para a análise dos websites dos bancos. Também concluímos que a CTA tem efeitos moderadores significativos na grande maioria das variáveis utilizadas neste estudo. Assim, conseguimos realçar a importância teórica das características pessoais dos consumidores no seu comportamento online. Para os gestores, uma melhor compreensão destas características individuais permitir-lhes-á desenvolver websites customizados que irão satisfazer as expectativas dos seus clientes.

Trabecular bone score: a noninvasive analytical method based upon the DXA image.

The trabecular bone score (TBS) is a gray-level textural metric that can be extracted from the two-dimensional lumbar spine dual-energy X-ray absorptiometry (DXA) image. TBS is related to bone microarchitecture and provides skeletal information that is not captured from the standard bone mineral density (BMD) measurement. Based on experimental variograms of the projected DXA image, TBS has the potential to discern differences between DXA scans that show similar BMD measurements. An elevated TBS value correlates with better skeletal microstructure; a low TBS value correlates with weaker skeletal microstructure. Lumbar spine TBS has been evaluated in cross-sectional and longitudinal studies. The following conclusions are based upon publications reviewed in this article: 1) TBS gives lower values in postmenopausal women and in men with previous fragility fractures than their nonfractured counterparts; 2) TBS is complementary to data available by lumbar spine DXA measurements; 3) TBS results are lower in women who have sustained a fragility fracture but in whom DXA does not indicate osteoporosis or even osteopenia; 4) TBS predicts fracture risk as well as lumbar spine BMD measurements in postmenopausal women; 5) efficacious therapies for osteoporosis differ in the extent to which they influence the TBS; 6) TBS is associated with fracture risk in individuals with conditions related to reduced bone mass or bone quality. Based on these data, lumbar spine TBS holds promise as an emerging technology that could well become a valuable clinical tool in the diagnosis of osteoporosis and in fracture risk assessment.

Iowa Technology Governance Board Annual Report, January 2, 2008

This Technology Governance Board Annual Report provides information on the FY05 – FY09 Information Technology Personnel Spending; FY05 – FY09 Technology Equipment and Services Spending; and FY05 – FY09 Internal IT Expenditures with the Iowa Communications Network and Department of Administrative Services - Information Technology Enterprise. The report also contains a projection of technology cost savings. This report was produced in compliance with Iowa Code §8A.204(3a) and was submitted to the Governor, the Department of Management, and the General Assembly on January 2, 2008.

Implementação do abc (activity-based costing) numa empresa prestação de serviços de saúde

O presente trabalho cujo título é Implementação do ABC numa empresa prestadora de serviços de Saúde, tem como finalidade a obtenção do grau de licenciatura em Contabilidade e Administração e tem como principal objectivo a implementação do método ABC numa pequena e média empresa de prestação de serviços de saúde, como um instrumento de apoio á gestão. Para a introdução da Contabilidade de Gestão na empresa, há que se escolher um método/sistema de apuramento de gastos que espelha a realidade da empresa, e de uma certa forma o ABC é o método ideal para apuramento de resultados sem distorções. O ABC (Activity-Based Cost) apura os resultados através da relação de causa-efeito, considerando que as actividades é que geram gastos e os objectos de custeio é que consomem as actividades. É aplicável tanto nas empresas industriais como nas empresas prestadoras de serviços, apesar de inicialmente ter sido concebido para as empresas industrias, isto é, para as grandes empresas devido aos avultados recursos financeiros e humanos como também pelo tempo necessário para a sua implementação. Mas o modelo matricial apresentado por Roztcki et al (1999) permite a aplicação deste método nas PME com poucos recursos financeiros e de tempo, utilizando uma folha de cálculo no Excel. Será este modelo a ser proposto e poderá ser implementado na clínica. O modelo apresentado foi testado num estudo de caso realizado numa clínica. Com a realização dos testes foi detectado algumas dificuldades e limitações, as maiores dificuldades encontradas foram a identificação das actividades e dos cost drivers, devido à complexidade do sector. A implementação foi concluída com sucesso, proporcionando informações detalhadas dos gastos dos produtos/serviços prestados em toda a clínica. This work was done as a requisite for obtaining a degree in Accounting and Administration, and is titled “The Implementation of ABC – Activity Based Cost in a company that provides health services”. Its main purpose is to analyze the implementation of ABC method in a small and medium-sized enterprise which provides health services to support decision making by the Managers. To adopt management accounting in a company, it’s necessary to choose a cost qualifying system that reflects the reality of the company and in a certain way ABC is the method which can determine the results without any distortion. ABC (Activity-Based Cost) determines the results through cause-and-effect relationship, whereas the activities generate spending while costing objects consume the activities. It’s applicable both in industrial companies as in services providers, although it was initially designed for industrial companies, that is, to large companies, due to the huge financial and human resources existent as well as by the time required for its implementation. But the matrix model presented by Roztckiet al (1999) allows application of this method in small and medium-sized enterprises with limited financial resources and time, using a spreadsheet in Excel. This model will be proposed and could be implemented in any clinic. The model was tested in a case study, undertaken in a private clinic. With the realization of the tests, some problems and limitations were detected, and the major difficulties encountered were the identification of activities and cost drivers, due to the complexity of the sector. The implementation was completed successfully, providing detailed information of the products services spending throughout the clinic.

Multinationals, technology networks and international takeovers

We formulate a knowlegde--based model of direct investment through mergers and acquisitions. M&As are realized to create comparative advantages by exploiting international synergies and appropriating local technology spillovers requiring geographical proximity, but can also represent a strategic response to the presence of a multinational rival. The takeover fee paid tends to increase with the strength of local spillovers which can thus work against multinationalization. Seller's bargaining power increases the takeover fee, but does not influence the investment decision. We characterize losers and winners from multinationalization, and show that foreign investment stimulates research but could result in a synergy trap reducing multinationals' profits.

Metabolic labeling and protein linearization technology allow the study of proteins secreted by cultured cells in serum-containing media.

Supernatants from cell cultures (also called conditioned media, CMs) are commonly analyzed to study the pool of secreted proteins (secretome). To reduce the exogenous protein background, serum-free media are often used to obtain CMs. Serum deprivation, however, can severely affect cell viability and phenotype, including protein secretion. We present a strategy to analyze the proteins secreted by cells in fetal bovine serum-containing CMs, which combines the advantage of metabolic labeling and protein concentration linearization techniques. Incubation of CMs with a hexapeptide ligand library was used to reduce the dynamic range of the samples and led to the identification of 3 times more proteins than in untreated CM samples. Labeling with a deuterated amino acid was used to distinguish between cellular proteins and homologous bovine proteins contained in the medium. Application of the strategy to two breast cancer cell lines led to the identification of proteins secreted in different amounts and which could correlate with their varying degree of aggressiveness. Selected reaction monitoring (SRM)-based quantitation of three proteins of interest in the crude samples yielded data in good agreement with the results from concentration-equalized samples.

Establishment of the epithelial-specific transcriptome of normal and malignant human breast cells based on MPSS and array expression data.

INTRODUCTION: Diverse microarray and sequencing technologies have been widely used to characterise the molecular changes in malignant epithelial cells in breast cancers. Such gene expression studies to identify markers and targets in tumour cells are, however, compromised by the cellular heterogeneity of solid breast tumours and by the lack of appropriate counterparts representing normal breast epithelial cells. METHODS: Malignant neoplastic epithelial cells from primary breast cancers and luminal and myoepithelial cells isolated from normal human breast tissue were isolated by immunomagnetic separation methods. Pools of RNA from highly enriched preparations of these cell types were subjected to expression profiling using massively parallel signature sequencing (MPSS) and four different genome wide microarray platforms. Functional related transcripts of the differential tumour epithelial transcriptome were used for gene set enrichment analysis to identify enrichment of luminal and myoepithelial type genes. Clinical pathological validation of a small number of genes was performed on tissue microarrays. RESULTS: MPSS identified 6,553 differentially expressed genes between the pool of normal luminal cells and that of primary tumours substantially enriched for epithelial cells, of which 98% were represented and 60% were confirmed by microarray profiling. Significant expression level changes between these two samples detected only by microarray technology were shown by 4,149 transcripts, resulting in a combined differential tumour epithelial transcriptome of 8,051 genes. Microarray gene signatures identified a comprehensive list of 907 and 955 transcripts whose expression differed between luminal epithelial cells and myoepithelial cells, respectively. Functional annotation and gene set enrichment analysis highlighted a group of genes related to skeletal development that were associated with the myoepithelial/basal cells and upregulated in the tumour sample. One of the most highly overexpressed genes in this category, that encoding periostin, was analysed immunohistochemically on breast cancer tissue microarrays and its expression in neoplastic cells correlated with poor outcome in a cohort of poor prognosis estrogen receptor-positive tumours. CONCLUSION: Using highly enriched cell populations in combination with multiplatform gene expression profiling studies, a comprehensive analysis of molecular changes between the normal and malignant breast tissue was established. This study provides a basis for the identification of novel and potentially important targets for diagnosis, prognosis and therapy in breast cancer.