Reduction of diesel engine exhaust emissions using non-thermal plasma technology

Non-thermal plasma (NTP) is a promising candidate for controlling engine exhaust emissions. Plasma is known as the fourth state of matter, where both electrons and positive ions co-exist. Both gaseous and particle emissions of diesel exhaust undergo chemical changes when they are exposed to plasma. In this project diesel particulate matter (DPM) mitigation from the actual diesel exhaust by using NTP technology has been studied. The effect of plasma, not only on PM mass but also on PM size distribution, physico-chemical structure of PM and PM removal mechanisms, has been investigated. It was found that NTP technology can significantly reduce both PM mass and number. However, under some circumstances particles can be formed by nucleation. Energy required to create the plasma with the current technology is higher than the benchmark set by the commonly used by the automotive industry. Further research will enable the mechanism of particle creation and energy consumption to be optimised.

Consumer’s persistence in solving their own problem with self‐service technology

An increasing range of technology services are now offered on a self-service basis. However, problems with self-service technologies (SSTs) occur at times due to the technical error, staff error, or consumers’ own mistakes. Considering the role of consumers as co-producers in the SST context, we aim to study consumer’s behaviours, strategies, and decision making in solving their problem with SST and identify the factors contributing to their persistence in solving the problem. This study contributes to the information systems research, as it is the first study that aims to identify such a process and the factors affecting consumers’ persistence in solving their problem with SST. A focus group with user support staff has been conducted, yielding some initial results that helped to conduct the next phases of the study. Next, using Critical Incident Technique, data will be gathered through focus groups with users, diary method, and think-aloud method.

Science, Technology, Engineering, and Maths (STEM)

"Historically, science had a place in education before the time of Plato and Aristotle (e.g., Stonehenge). Technology gradually increased since early human inventions (e.g., indigenous tools and weapons), rose up dramatically through the industrial revolution and escalated exponentially during the twentieth and twenty-first centuries, particularly with the advent of the Internet. Engineering accomplishments were evident in the constructs of early civil works, including roads and structural feats such as the Egyptian pyramids. Mathematics was not as clearly defined BC (Seeds 2010), but was utilized for more than two millennia (e.g., Archimedes, Kepler, and Newton) and paved its way into education as an essential scientific tool and a way of discovering new possibilities. Hence, combining science, technology, engineering, and mathematics (STEM) areas should not come as a surprise but rather as a unique way of packaging what has been ..."--Publisher Website

Enterprise business technology governance: A validation of three technology-governance competencies for boards of directors

The competent leadership and governance of digital transformation needs to involve the board of directors. The reported lack of such capability in boards is becoming a pressing issue. Underpinning leadership in such transformation are the competencies to effectively govern Enterprise Technology (ETG). In this paper we take the position that ETG competencies are essential in boards because competent enterprise business technology governance has been shown to contribute to increased revenue, profit, and returns. We report the industry validation processes of a set of three board-of-director competencies needed for effective ETG related to strategy and planning; investment and risk; and, innovation and value creation. We conclude that gaps in board ETG competence remain.

But how do we know they watched it? Adapting to the flipped classroom conundrum

Those who teach film and media need to use screen content to illustrate their subjects. For example, students want illustrations to accompany lectures on film or television genres. Our experience has been that student access to the film and television screen content underpinning a study of genres is not only desirable but is, in fact, crucial for effective teaching and learning outcomes. Not so long ago, a screening during or at the completion of a lecture was the expected method by which educators delivered screen content to illustrate their teaching. Even if student attendance fluctuated from week to week a quick head count confirmed that a certain number of students were physically present. It was assumed that this physical attendance encouraged students to reflect upon and contextualize the material post lecture. While simply attending a lecture will not translate into actual student learning, it does demonstrate a willingness by students to engage with the course content by making a commitment to attend a scheduled and recurring lecture and screening program. However, as flipped classroom models gain acceptance in educational institutions, this traditional lecture-screening model is giving way to online, off-site, and student-controlled mechanisms for screen content delivery and viewing. Nevertheless, care should be taken when assessing how online delivery translates into student engagement and learning. As Junco (2012) points out, “it’s not the technology that generates learning, but the ways in which the technology are used.” Discussed, debated, and embraced to varying degrees by educators, there remains no definitive model for the flipped classroom – although many models involve ‘flipping’ content and knowledge acquisition (including viewing films and television shows) from scheduled on-campus classes to online material viewed by students in advance of an on-campus lecture or class. The classroom or tutorial room then becomes a space to problem-solve, engage in collaborate learning, and advance and explain concepts. From an institutional perspective, the flipped classroom model could deliver an additional benefit beyond immediate pedagogical concerns. Tucker (2012) suggests through the flipped classroom model “all aspects of instruction can be rethought to best maximize the scarcest learning resource — time.” The narrative most often associated with this shift is that the move to online content delivery of lecture and cinematic / televisual material may also provide educators with more time to do other work such as engage in research, plan strategies to empower students. Experimentation with the flipped classroom model is playing out in various educational institutions. Yet several core concerns remain — one of these concerns is the crucial question of whether an online/digital flipped approach is more effective for student engagement and learning than the traditional lecture-screening mode for screen content delivery. Some urge caution in this regard, arguing that “new technology isn’t always supported by change management and professional development to ensure that digital isn’t just a goal within itself, but actually helps to transform education” (Fleming cited in Blain 2014). The most fundamental concern remains how do lecturers, instructors, and tutors know students have watched the films and television shows associated with a subject? The remainder of this discussion deals with these concerns, and possible solutions offered, through an analysis of the Film, Television and Screen Genres subject at the Queensland University of Technology (QUT) in Brisbane, Queensland.

Wearable technology: The next frontier?

The ways in which technology mediates daily activities is shifting rapidly. Global trends point toward the uptake of ambient and interactive media to create radical new ways of working, interacting and socialising. Tech giants such as Google and Apple are banking on the success of this emerging market by investing in new future focused consumer products such as Google Glass and the Apple Watch. The potential implications of ubiquitous technological interactions via tangible and ambient media have never been more real or more accessible.

Impact of technology uptake on an Australian electricity distribution network

This paper presents simulation results for future electricity grids using an agent-based model developed with MODAM (MODular Agent-based Model). MODAM is introduced and its use demonstrated through four simulations based on a scenario that expects a rise of on-site renewable generators and electric vehicles (EV) usage. The simulations were run over many years, for two areas in Townsville, Australia, capturing variability in space of the technology uptake, and for two charging methods for EV, capturing people's behaviours and their impact on the time of the peak load. Impact analyses of these technologies were performed over the areas, down to the distribution transformer level, where greater variability of their contribution to the assets peak load was observed. The MODAM models can be used for different purposes such as impact of renewables on grid sizing, or on greenhouse gas emissions. The insights gained from using MODAM for technology assessment are discussed.

Theorizing why in digital learning: Opening frontiers for inquiry and innovation with technology

Asking why is an important foundation of inquiry and fundamental to the development of reasoning skills and learning. Despite this, and despite the relentless and often disruptive nature of innovations in information and communications technology (ICT), sophisticated tools that directly support this basic act of learning appear to be undeveloped, not yet recognized, or in the very early stages of development. Why is this so? To this question, there is no single factual answer. In response, however, plausible explanations and further questions arise, and such responses are shown to be typical consequences of why-questioning. A range of contemporary scenarios are presented to highlight the problem. Consideration of the various inputs into the evolution of digital learning is introduced to provide historical context and this serves to situate further discussion regarding innovation that supports inquiry-based learning. This theme is further contextualized by narratives on openness in education, in which openness is also shown to be an evolving construct. Explanatory and descriptive contents are differentiated in order to scope out the kinds of digital tools that might support inquiry instigated by why-questioning and which move beyond the search paradigm. Probing why from a linguistic perspective reveals versatile and ambiguous semantics. The why dimension—asking, learning, knowing, understanding, and explaining why—is introduced as a construct that highlights challenges and opportunities for ICT innovation. By linking reflective practice and dialogue with cognitive engagement, this chapter points to specific frontiers for the design and development of digital learning tools, frontiers in which inquiry may find new openings for support.

Final Report: University of Technology, Sydney Student Feedback Survey Review

This evaluation was commissioned by Martin Hanlon, Director of the Planning and Quality Unit of the University of Technology, Sydney (UTS) to investigate the Student Feedback Survey (SFS) system, engagement in stakeholder feedback and provide recommendations against the Terms of Reference.

Securing Australia's future: The role of science, research and technology in lifting Australian productivity

A three-year research program funded by the Australian Research Council and conducted by the four Learned Academies through the Australian Council of Learned Academies for PMSEIC, through the Office of the Chief Scientist. Securing Australia’s Future delivers research-based evidence and findings to support policy development in areas of importance to Australia’s future.

Consumer preferences for teledermoscopy screening to detect melanoma early

- Introduction ‘Store and forward’ teledermoscopy is a technology with potential advantages for melanoma screening. Any large-scale implementation of this technology is dependent on consumer acceptance. - Aim To investigate preferences for melanoma screening options compared to skin selfexamination in adults considered to be at increased risk of developing skin cancer. - Methods A discrete choice experiment (DCE) was completed by 35 consumers, all of whom had prior experience with the use of teledermoscopy, in Queensland, Australia. Participants made 12 choices between screening alternatives described by seven attributes including monetary cost. A mixed logit model was used to estimate the relative weights that consumers place on different aspects of screening, along with the marginal willingness to pay for teledermoscopy as opposed to screening at a clinic. - Results Overall, participants preferred screening/diagnosis by a health professional rather than skin self-examination. Key drivers of screening choice were for results to be reviewed by a dermatologist; a higher detection rate; fewer non-cancerous moles being removed in relation for every skin cancer detected; and less time spent away from usual activities. On average, participants were willing to pay AU$110 to have teledermoscopy with dermatologist review available to them as a screening option. - Discussion & Conclusions Consumers preferentially value aspects of care that are more feasible with a teledermoscopy screening model, as compared to other skin cancer screening and diagnosis options. This study adds to previous literature in the area which has relied on the use of consumer satisfaction scales to assess the acceptability of teledermoscopy.

Key beliefs influencing young drivers' engagement with social interactive technology on their Smartphones: A qualitative study

Objective The main aim of this study was to identify young drivers' underlying beliefs (i.e., behavioral, normative, and control) regarding initiating, monitoring/reading, and responding to social interactive technology (i.e., functions on a Smartphone that allow the user to communicate with other people). Method This qualitative study was a beliefs elicitation study in accordance with the Theory of Planned Behavior and sought to elicit young drivers' behavioral (i.e., advantages, disadvantages), normative (i.e., who approves, who disapproves), and control beliefs (i.e., barriers, facilitators) which underpin social interactive technology use while driving. Young drivers (N = 26) aged 17 to 25 years took part in an interview or focus group discussion. Results While differences emerged between the three behaviors of initiating, monitoring/reading, and responding for each of the behavioral, normative, and control belief categories, the strongest distinction was within the behavioral beliefs category (e.g., communicating with the person that they were on the way to meet was an advantage of initiating; being able to determine whether to respond was an advantage of monitoring/reading; and communicating with important people was an advantage of responding). Normative beliefs were similar for initiating and responding behaviors (e.g., friends and peers more likely to approve than other groups) and differences emerged for monitoring/reading (e.g., parents were more likely to approve of this behavior than initiating and responding). For control beliefs, there were differences between the beliefs regarding facilitators of these behaviors (e.g., familiar roads and conditions facilitated initiating; having audible notifications of an incoming communication facilitated monitoring/reading; and receiving a communication of immediate importance facilitated responding); however, the control beliefs that presented barriers were consistent across the three behaviors (e.g., difficult traffic/road conditions). Conclusion The current study provides an important addition to the extant literature and supports emerging research which suggests initiating, monitoring/reading, and responding may indeed be distinct behaviors with different underlying motivations.

Technology adoption as a multi-stage process

This study proposes that technology adoption be considered as a multi-stage process constituting several distinct stages. Using the Theory of Planned Behaviour (TPB), Ettlie’s adoption stages and by employing data gathered from 162 owners of Small and Medium-sized Enterprises (SMEs), our findings show that the determinants of the intention to adopt packaged software fluctuate significantly across adoption stages.

The Global Protection of Personal Health Data

The workshop is an activity of the IMIA Working Group ‘Security in Health Information Systems’ (SiHIS). It is focused to the growing global problem: how to protect personal health data in today’s global eHealth and digital health environment. It will review available trust building mechanisms, security measures and privacy policies. Technology alone does not solve this complex problem and current protection policies and legislation are considered woefully inadequate. Among other trust building tools, certification and accreditation mechanisms are dis-cussed in detail and the workshop will determine their acceptance and quality. The need for further research and international collective action are discussed. This workshop provides an opportunity to address a critical growing problem and make pragmatic proposals for sustainable and effective solutions for global eHealth and digital health.