917 resultados para simultaneous shape and topology optimisation
Resumo:
This study examines the protection of fundamental rights, democracy and rule of law in the European Union, and the challenges that arise in reflecting on ways to strengthen EU competences in these contested terrains. It provides a ‘state of play’ and critical account of EU-level policy and legal mechanisms assessing the relationship between rule of law, democracy and fundamental rights in the member states of the Union. The cross-cutting challenges affecting their uses, effective implementation and practical operability constitute a central point of the analysis. The study argues that the relationship between rule of law, democracy and fundamental rights is co-constitutive. Any future rule of law-related policy discussion in the EU should start from an understanding of the triangular relationship between these dimensions from the perspective of ‘democratic rule of law with fundamental rights’, i.e. the legally based rule of a democratic state that delivers fundamental rights. The three criteria are inherently and indivisibly interconnected, and interdependent on each of the others, and they cannot be separated without inflicting profound damage to the whole and changing its essential shape and configuration.
Resumo:
"Mode 3" allows and emphasizes the co-existence and co-evolution of different knowledge and innovation paradigms: the competitiveness and superiority of a knowledge system is highly determined by its adaptive capacity to combine and integrate different knowledge and innovation modes via co-evolution, co-specialization and coopetition [sic] of knowledge stock and flow dynamics. What results is an emerging fractal knowledge and innovation ecosystem, well-configured for the knowledge economy and society. The intrinsic litmus test of the capacity of such an ecosystem to survive and prosper in the context of continually glocalizing [sic] and intensifying competition represents the ultimate competitiveness benchmark with regards to the robustness and quality of the ecosystem's knowledge and innovation architecture and topology.
Resumo:
Inheritance of each chromosome depends upon its centromere. A histone H3 variant, centromere protein A (CENP-A), is essential for epigenetically marking centromere location. We find that CENP-A is quantitatively retained at the centromere upon which it is initially assembled. CENP-C binds to CENP-A nucleosomes and is a prime candidate to stabilize centromeric chromatin. Using purified components, we find that CENP-C reshapes the octameric histone core of CENP-A nucleosomes, rigidifies both surface and internal nucleosome structure, and modulates terminal DNA to match the loose wrap that is found on native CENP-A nucleosomes at functional human centromeres. Thus, CENP-C affects nucleosome shape and dynamics in a manner analogous to allosteric regulation of enzymes. CENP-C depletion leads to rapid removal of CENP-A from centromeres, indicating their collaboration in maintaining centromere identity.
Resumo:
Lateral cyclic loaded structures in granular soils can lead to an accumulation of irreversible strains by changing their mechanical response (densification) and forming a closed convective cell in the upper layer of the bedding. In the present thesis the convective cell dimension, formation and grain migration inside this closed volume have been studied and presented in relation to structural stiffness and different loads. This relation was experimentally investigated by applying a cyclic lateral force to a scaled flexible vertical element embedded in dry granular soil. The model was monitored with a camera in order to derive the displacement field by means of the PIV technique. Modelling large soil deformation turns out to be difficult, using mesh-based methods. Consequently, a mesh-free approach (DEM) was chosen in order to investigate the granular flow with the aim of extracting interesting micromechanical information. In both the numerical and experimental analyses the effect of different loading magnitudes and different dimensions of the vertical element were considered. The main results regarded the different development, shape and dimensions of the convection cell and the surface settlements. Moreover, the Discrete Element Method has proven to give satisfactory results in the modelling of large deformation phenomena such as the ratcheting convective cell.
Resumo:
BACKGROUND Lameness represents the third most important health-related cause of economic loss in the dairy industry after fertility and mastitis. Although, dairy Mediterranean Buffaloes (MB) and dairy cows share similar breeding systems predisposing to similar herd problems, published studies exploring its relevance and role in these ruminants are still rare and incomplete. The aims of this study were to describe the clinical findings of foot disorders (FDs) in dairy MB and their influence on animal welfare, determined by assessment of locomotion score (LS), body condition score (BCS) and cleanliness score (CS). RESULTS Of 1297 multiparous MB submitted to routine trimming procedures, 229 buffaloes showed at least one FD. The prevalence of buffaloes affected by FDs was 17.7 %, while motility and lameness indexes were 84.1 % (1091/1297) and 15.9 % (206/1297), respectively. Overgrowth was present in 17.0 % (220/1297), corkscrew claw in 15.8 % (205/1297), interdigital phlegmon in 0.9 % (12/1297), white line abscess in 0.8 % (11/1297), digital dermatitis in 0.1 % (1/1297) and interdigital hyperplasia in 0.1 % (1/1297). Simultaneous presence of FDs was recorded in 17.0 % of MB (221/1297): overgrowth and corkscrew claw occurred together in 15.8 % of cases (205/1297), overgrowth and interdigital phlegmon in 0.3 % (4/1297), overgrowth and white line abscess in 0.8 % (11/1297), digital dermatitis and interdigital hyperplasia in 0.1 % (1/1297). The presence of FDs was always associated with lameness (LS > 2), except from 23 MB with simultaneous overgrowth and interdigital phlegmon occurrence. The majority of MB within the under-conditioned group (95.5 %, 43/45) and all those with CS > 2 (122/122) had a locomotion score above the threshold of normality (LS > 2). Furthermore, foot diseases such as interdigital hyperplasia, white line abscess and digital dermatitis or interdigital hyperplasia seemed to occur more frequently associated with decreased BCS and increased CS scores. CONCLUSIONS This study describes for the first time the involvement of white line disease, interdigital phlegmona, digital dermatitis and interdigital hyperplasia in foot disorders of dairy Mediterranean buffalo and shows their association with an impairment of animal welfare.
Resumo:
On the basis of aerial photographs of sea ice floes in the marginal ice zone (MIZ) of Prydz Bay acquired from December 2004 to February 2005 during the 21st Chinese National Antarctic Research Expedition, image processing techniques are employed to extract some geometric parameters of floes from two merged transects covering the whole MIZ. Variations of these parameters with the distance into the MIZ are then obtained. Different parameters of floe size, namely area, perimeter, and mean caliper diameter (MCD), follow three similar stages of increasing, flat and increasing again, with distance from the open ocean. Floe shape parameters (roundness and the ratio of perimeter to MCD), however, have less significant variations than that of floe size. Then, to modify the deviation of the cumulative floe size distribution from the ideal power law, an upper truncated power-law function and a Weibull function are used, and four calculated parameters of the above functions are found to be important descriptors of the evolution of floe size distribution in the MIZ. Among them, Lr of the upper truncated power-law function indicates the upper limit of floe size and roughly equals the maximum floe size in each square sample area. L0 in the Weibull distribution shows an increasing proportion of larger floes in squares farther from the open ocean and roughly equals the mean floe size. D in the upper truncated power-law function is closely associated with the degree of confinement during ice breakup. Its decrease with the distance into MIZ indicates the weakening of confinement conditions on floes owing to wave attenuation. The gamma of the Weibull distribution characterizes the degree of homogeneity in a data set. It also decreases with distance into MIZ, implying that floe size distributes increase in range. Finally, a statistical test on floe size is performed to divide the whole MIZ into three distinct zones made up of floes of quite different characteristics. This zonal structure of floe size also agrees well with the trends of floe shape and floe size distribution, and is believed to be a straightforward result of wave-ice interaction in the MIZ.
Resumo:
An integrated chemostratigraphic (87Sr/86Sr, d13C and 18O) study of benthic foraminifera is presented for a 210 m-thick, intermediate depth (upper/middle bathyal transition), Miocene nannofossil ooze section of Ocean Drilling Program Site 1120, Campbell Plateau off New Zealand. Our results indicate that new 87Sr/86Sr, d13C and d18O profiles are wholly consistent with their respective Miocene reference curves. These observations facilitate identification of a total of five reliable chemostratigraphic datums, which are based on the fundamental structural changes in the 87Sr/86Sr curve and paired simultaneous d13C and d18O events. The resultant age-depth relationship clearly shows that the Miocene (20-5 Ma) biopelagic sedimentation on the Campbell Plateau was essentially continuous at a moderate to high, linear sedimentation rate (17.5 m/m.y. with an exception of the uppermost 13 m). Our findings do not support the shipboard biostratigraphic age model, which assumes that the critical early-middle Miocene transition was interrupted by a major hiatus (<~3 m.y.). Because of its unique bathymetric setting at a paleowater-depth of ~ 600 m, which is among the shallowest of the coeval isotopically studied deep-sea sections in the South Pacific/Southern Ocean, Site 1120 will serve as a reference section for surveying the evolution of intermediate-water paleoceanography in the Southern Hemisphere across the middle Miocene climatic transition.
Resumo:
Benthic foraminifera from 24 DSDP/ODP sites were investigated to assess their global horizontal and vertical distribution in the deep-sea environment at the end of the Cretaceous period. The samples analyzed are from the late Maastrichtian and within the planktic foraminiferal Abathomphus mayaroensis Zone from a wide range of oceans and paleolatitudes, including the low-latitude Sites 10 and 384 (Atlantic Ocean), 47, 171, 305, and 465 (Pacific Ocean), the mid-latitude Sites 20, 111, 356, 363, 516, 525, 527, 548, and 605 (Atlantic Ocean), 216, 217, and 758 (Indian Ocean), and the high-latitude Sites 208 (Pacific Ocean), 689,698,700,738 and 750 (Southern Ocean). Correspondence analysis, based on the 75 most common taxa, shows a clear biogeographic trend along the first correspondence axis by arranging the sites in paleolatitudinal order. The assemblages from the Tethyan Realm (i.e., low latitudes) are marked by abundant heavily calcified buliminids (such as Bulimina incisa, B. trinitatensis, B. velascoensis, and Reussella szajnochae) and Aragonia spp., whereas high-latitude faunas are characterized by abundant Alabamina creta, Gyroidinoides quadratus, and Pullenia coryelli. The results indicate that the faunas at low and high latitudes, respectively, were influenced by quite different environmental conditions. This is based on the much higher abundance of infaunal morphotypes at low and mid latitudes compared to high latitudes, suggesting that the biogeographic trend found in the data set coincides with the trophic regime at the various sites. The results also provide support for the hypothesis that postulates two simultaneous sources and mechanisms for deep-water formation during the Late Cretaceous, including warm, saline deep water produced by evaporation at low (equatorial) latitudes in contrast to the formation of cold deep waters at high (southern) latitudes.
Resumo:
Warming and changes in ocean carbonate chemistry alter marine coastal ecosystems at an accelerating pace. The interaction between these stressors has been the subject of recent studies on reef organisms such as corals, bryozoa, molluscs, and crustose coralline algae. Here we investigated the combined effects of elevated sea surface temperatures and pCO2 on two species of photosymbiont-bearing coral reef Foraminifera: Heterostegina depressa (hosting diatoms) and Marginopora vertebralis (hosting dinoflagellates). The effects of single and combined stressors were studied by monitoring survivorship, growth, and physiological parameters, such as respiration, photochemistry (pulse amplitude modulation fluorometry and oxygen production), and chl a content. Specimens were exposed in flow-through aquaria for up to seven weeks to combinations of two pCO2 (~790 and ~490 µatm) and two temperature (28 and 31 °C) regimes. Elevated temperature had negative effects on the physiology of both species. Elevated pCO2 had negative effects on growth and apparent photosynthetic rate in H.depressa but a positive effect on effective quantum yield. With increasing pCO2, chl a content decreased in H. depressa and increased in M. vertebralis. The strongest stress responses were observed when the two stressors acted in combination. An interaction term was statistically significant in half of the measured parameters. Further exploration revealed that 75 % of these cases showed a synergistic (= larger than additive) interaction between the two stressors. These results indicate that negative physiological effects on photosymbiont-bearing coral reef Foraminifera are likely to be stronger under simultaneous acidification and temperature rise than what would be expected from the effect of each of the stressors individually.
Resumo:
In September 2013, the Colorado Front Range experienced a five-day storm that brought record-breaking precipitation to the region. As a consequence, many Front Range streams experienced flooding, leading to erosion, debris flows, bank failures and channel incision. I compare the effects that debris flows and flooding have on the channel bar frequency, frequency and location of wood accumulation, and on the shape and size of the channel along two flood impacted reaches located near Estes Park and Glen Haven, Colorado within Rocky Mountain National Park and Arapaho-Roosevelt National Forest: Black Canyon Creek (BCC) and North Fork Big Thompson River (NFBT). The primary difference between the two study areas is that BCC was inundated by multiple debris flows, whereas NFBT only experienced flooding. Fieldwork consisted of recording location and size of large wood and channel bars and surveying reaches to produce cross-sections. Additional observations were made on bank failures in NFBT and the presence of boulders in channel bars in BCC to determine sediment source. The debris flow acted to scour and incise BCC causing long-term alteration. The post-flood channel cross-sectional area is as much as 7 to 23 times larger than the pre-flood channel, caused by the erosion of the channel bed to bedrock and the elimination of riparian vegetation. Large wood was forced out of the stream channel and deposited outside of the bankfull channel. Flooding in NFBT caused bank erosion and widening that contributed sediment to channel bars, but accomplished little stream-bed scour. As a result, there was relatively little damage to mid-channel and riparian vegetation, and most large wood remained within the wetted channel.
Resumo:
Studying landscape evolution of the Earthís surface is difficult because both tectonic forces and surface processes control its response to perturbation, and ultimately, its shape and form. Researchers often use numerical models to study erosional response to deformation because there are rarely natural settings in which we can evaluate both tectonic activity and topographic response over appropriate time scales (103-105 years). In certain locations, however, geologic conditions afford the unique opportunity to study the relationship between tectonics and topography. One such location is along the Dragonís Back Pressure Ridge in California, where the landscape moves over a structural discontinuity along the San Andreas Fault and landscape response to both the initiation and cessation of uplift can be observed. In their landmark study, Hilley and Arrowsmith (2008) found that geomorphic metrics such as channel steepness tracked uplift and that hillslope response lagged behind that of rivers. Ideal conditions such as uniform vegetation density and similar lithology allowed them to view each basin as a developmental stage of response to uplift only. Although this work represents a significant step forward in understanding landscape response to deformation, it remains unclear how these results translate to more geologically complex settings. In this study, I apply similar methodology to a left bend along the San Andreas Fault in the Santa Cruz Mountains, California. At this location, the landscape is translated through a zone of localized uplift caused by the bend, but vegetation, lithology, and structure vary. I examine the geomorphic response to uplift along the San Andreas Fault bend in order to determine whether predicted landscape patterns can be observed in a larger, more geologically complex setting than the Dragonís Back Pressure Ridge. I find that even with a larger-scale and a more complex setting, geomorphic metrics such as channel steepness index remain useful tools for evaluating landscape evolution through time. Steepness indices in selected streams of study record localized uplift caused by the restraining bend, while hillslope adjustment in the form of landsliding occurs over longer time scales. This project illustrates that it is possible to apply concepts of landscape evolution models to complex settings and is an important contribution to the body of geomorphological study.
Resumo:
We sought to improve the feasibility of strain rate imaging (SRI) during dobutamine stress echocardiography (DSE) in 56 subjects at low risk of coronary disease. The impact of several SRI changes during acquisition were studied, including: (1) changing from fundamental to harmonic imaging; (2) parallel beam-forming; (3) alteration of spatial resolution and (4) narrow sector acquisition. We assessed SR signal quality, a quantitative measure of signal noise and measurements of SRI. Of 1462 segments evaluated, 6% were uninterpretable at rest and 8% at peak stress. Signal quality was optimised by increasing temporal (p = 0.01) and spatial resolution (p<0.0001 vs. baseline imaging) at rest and peak. Increasing spatial resolution also minimised signal noise (p<0.0001). Inter-observer variability of time to peak SR and peak SR were less with high temporal and spatial resolution. SRI quality can be improved with harmonic imaging and higher temporal resolution but optimisation of spatial resolution is critical. (C) 2004 World Federation for Ultrasound in Medicine Biology.
Resumo:
Motion is a powerful cue for figure-ground segregation, allowing the recognition of shapes even if the luminance and texture characteristics of the stimulus and background are matched. In order to investigate the neural processes underlying early stages of the cue-invariant processing of form, we compared the responses of neurons in the striate cortex (V1) of anaesthetized marmosets to two types of moving stimuli: bars defined by differences in luminance, and bars defined solely by the coherent motion of random patterns that matched the texture and temporal modulation of the background. A population of form-cue-invariant (FCI) neurons was identified, which demonstrated similar tuning to the length of contours defined by first- and second-order cues. FCI neurons were relatively common in the supragranular layers (where they corresponded to 28% of the recorded units), but were absent from layer 4. Most had complex receptive fields, which were significantly larger than those of other V1 neurons. The majority of FCI neurons demonstrated end-inhibition in response to long first- and second-order bars, and were strongly direction selective, Thus, even at the level of V1 there are cells whose variations in response level appear to be determined by the shape and motion of the entire second-order object, rather than by its parts (i.e. the individual textural components). These results are compatible with the existence of an output channel from V1 to the ventral stream of extrastriate areas, which already encodes the basic building blocks of the image in an invariant manner.
Resumo:
What are the components that control the assembly of subcellular organelles in eukaryotic cells? Although membranes can clearly be distorted by cytosolic factors, very little is known about the intrinsic mechanisms that control the biogenesis, shape, and organization of organellar membranes. Here, we found that the unconventional phospholipid lysobisphosphatidic acid (LBPA) could induce the formation of multivesicular liposomes that resembled the multivesicular endosomes that exist where this lipid is found in vivo. This process depended on the same pH gradient that exists across endosome membranes in vivo and was selectively controlled by Alix. In turn, Alix regulated the organization of LBPA-containing endosomes in vivo.
Resumo:
Semisolid metal forming has now been accepted as a viable technology for production of components with complex shape and high integrity. The advantages of semisolid metal forming can only be achieved when the feedstock material has a non-dendritic semisolid structure. A controlled nucleation method has been developed to produce such structures for semisolid forming. By controlling grain nucleation and growth, fine-grained and non-dendritic microstructures that are suitable for semisolid casting can be generated. The method was applied to hypoeutectic and hypereutectic Al-Si casting alloys, Al wrought alloys and a Mg alloy. Parameters such as pouring temperature, cooling rate and grain refiner addition were controlled to achieve copious nucleation, nuclei survival and dendritic growth suppression during solidification. The influences of the controlling parameters on the formation of semisolid structure were different for each of these alloy groups. The as-cast structures were then partially remelted and isothermally held. Semisolid structures were developed and followed by semisolid casting into a stepped die.