Seawater carbonate chemistry and resource allocation and extracellular acid-base status in the sea urchin Strongylocentrotus droebachiensis during experiments, 2012

Anthropogenic CO2 emission will lead to an increase in seawater pCO2 of up to 80-100 Pa (800-1000 µatm) within this century and to an acidification of the oceans. Green sea urchins (Strongylocentrotus droebachiensis) occurring in Kattegat experience seasonal hypercapnic and hypoxic conditions already today. Thus, anthropogenic CO2 emissions will add up to existing values and will lead to even higher pCO2 values >200 Pa (>2000 µatm). To estimate the green sea urchins' potential to acclimate to acidified seawater, we calculated an energy budget and determined the extracellular acid base status of adult S. droebachiensis exposed to moderately (102 to 145 Pa, 1007 to 1431 µatm) and highly (284 to 385 Pa, 2800 to 3800 µatm) elevated seawater pCO2 for 10 and 45 days. A 45 - day exposure to elevated pCO2 resulted in a shift in energy budgets, leading to reduced somatic and reproductive growth. Metabolic rates were not significantly affected, but ammonium excretion increased in response to elevated pCO2. This led to decreased O:N ratios. These findings suggest that protein metabolism is possibly enhanced under elevated pCO2 in order to support ion homeostasis by increasing net acid extrusion. The perivisceral coelomic fluid acid-base status revealed that S. droebachiensis is able to fully (intermediate pCO2) or partially (high pCO2) compensate extracellular pH (pHe) changes by accumulation of bicarbonate (maximum increases 2.5 mM), albeit at a slower rate than typically observed in other taxa (10 day duration for full pHe compensation). At intermediate pCO2, sea urchins were able to maintain fully compensated pHe for 45 days. Sea urchins from the higher pCO2 treatment could be divided into two groups following medium-term acclimation: one group of experimental animals (29%) contained remnants of food in their digestive system and maintained partially compensated pHe (+2.3 mM HCO3), while the other group (71%) exhibited an empty digestive system and a severe metabolic acidosis (-0.5 pH units, -2.4 mM HCO3). There was no difference in mortality between the three pCO2 treatments. The results of this study suggest that S. droebachiensis occurring in the Kattegat might be pre-adapted to hypercapnia due to natural variability in pCO2 in its habitat. We show for the first time that some echinoderm species can actively compensate extracellular pH. Seawater pCO2 values of >200 Pa, which will occur in the Kattegat within this century during seasonal hypoxic events, can possibly only be endured for a short time period of a few weeks. Increases in anthropogenic CO2 emissions and leakages from potential sub-seabed CO2 storage (CCS) sites thus impose a threat to the ecologically and economically important species S. droebachiensis.

Ecosystem regimes and responses in a coupled ancient lake system from MIS 5b to present: the diatom record of lakes Ohrid and Prespa

We reconstruct the aquatic ecosystem interactions since the last interglacial period in the oldest, most diverse, hydrologically connected European lake system, by using palaeolimnological diatom and selected geochemistry data from Lake Ohrid “DEEP site” core and equivalent data from Lake Prespa core, Co1215. Driven by climate forcing, the lakes experienced two adaptive cycles during the last 92 ka: "interglacial and interstadial" and "glacial" cycle. The short-term ecosystems reorganizations, e.g. regime shifts within these cycles substantially differ between the lakes, as evident from the inferred amplitudes of variation. The deeper Lake Ohrid shifted between ultra oligo- and oligotrophic regimes in contrast to the much shallower Lake Prespa, which shifted from a deeper, (oligo-) mesotrophic to a shallower, eutrophic lake and vice versa. Due to the high level of ecosystem stability (e.g. trophic state, lake level), Lake Ohrid appears relatively resistant to external forcing, such as climate and environmental change. Recovering in a relatively short time from major climate change, Lake Prespa is a resilient ecosystem. At the DEEP site, the decoupling between the lakes' response to climate change is marked in the prolonged and gradual changes during the MIS 5/4 and 2/1 transitions. These response differences and the lakes' different physical and chemical properties may limit the influence of Lake Prespa on Lake Ohrid. Regime shifts of Lake Ohrid due to potential hydrological change in Lake Prespa are not evident in the data presented here. Moreover, a complete collapse of the ecosystems functionality and loss of their diatom communities did not happen in either lake for the period presented in the study.

Design and Optimization of Power Delivery and Distribution Systems Using Evolutionary Computation Techniques

Nowadays computing platforms consist of a very large number of components that require to be supplied with diferent voltage levels and power requirements. Even a very small platform, like a handheld computer, may contain more than twenty diferent loads and voltage regulators. The power delivery designers of these systems are required to provide, in a very short time, the right power architecture that optimizes the performance, meets electrical specifications plus cost and size targets. The appropriate selection of the architecture and converters directly defines the performance of a given solution. Therefore, the designer needs to be able to evaluate a significant number of options in order to know with good certainty whether the selected solutions meet the size, energy eficiency and cost targets. The design dificulties of selecting the right solution arise due to the wide range of power conversion products provided by diferent manufacturers. These products range from discrete components (to build converters) to complete power conversion modules that employ diferent manufacturing technologies. Consequently, in most cases it is not possible to analyze all the alternatives (combinations of power architectures and converters) that can be built. The designer has to select a limited number of converters in order to simplify the analysis. In this thesis, in order to overcome the mentioned dificulties, a new design methodology for power supply systems is proposed. This methodology integrates evolutionary computation techniques in order to make possible analyzing a large number of possibilities. This exhaustive analysis helps the designer to quickly define a set of feasible solutions and select the best trade-off in performance according to each application. The proposed approach consists of two key steps, one for the automatic generation of architectures and other for the optimized selection of components. In this thesis are detailed the implementation of these two steps. The usefulness of the methodology is corroborated by contrasting the results using real problems and experiments designed to test the limits of the algorithms.

Stress relaxation losses of prestressing steel wires

Prestressed structures are susceptible to relaxation losses which are of significant importance in structural design. After being manufactured, prestressing wires are coiled to make their storage and transportation easier. The possible deleterious effects of this operation on the stress relaxation behavior of prestressing steel wires are usually neglected, though it has been noticed by manufacturers and contractors that when relaxation tests are carried out after a long-time storage, on occasions relaxation losses are higher than those measured a short time after manufacturing. The influence of coiling on the relaxation losses is checked by means of experimental work and confirmed with a simple analytical model. The results show that some factors like initial residual stresses, excessively long-time storage or storage at high temperatures, can trigger or accentuate this damage. However, it is also shown that if the requirements of standards are fulfilled (minimum coiling diameters) these effects can be neglected.

Characterization cement pastes degraded in lanoratory solutions and physiochemical parameters employed for modeling the process

Previously degradation studies carried out, over a number of different mortars by the research team, have shown that observed degradation does not exclusively depend on the solution equilibrium pH, nor the aggressive anions relative solubility. In our tests no reason was found that could allow us to explain, why same solubility anions with a lower pH are less aggressive than others. The aim of this paper is to study cement pastes behavior in aggressive environments. As observed in previous research, this cement pastes behaviors are not easily explained only taking into account only usual parameters, pH, solubility etc. Consequently the paper is about studying if solution physicochemical characteristics are more important in certain environments than specific pH values. The paper tries to obtain a degradation model, which starting from solution physicochemical parameters allows us to interpret the different behaviors shown by different composition cements. To that end, the rates of degradation of the solid phases were computed for each considered environment. Three cement have been studied: CEM I 42.5R/SR, CEM II/A-V 42.5R and CEM IV/B-(P-V) 32.5 N. The pastes have been exposed to five environments: sodium acetate/acetic acid 0.35 M, sodium sulfate solution 0.17 M, a solution representing natural water, saturated calcium hydroxide solution and laboratory environment. The attack mechanism was meant to be unidirectional, in order to achieve so; all sides of cylinders were sealed except from the attacked surface. The cylinders were taking out of the exposition environments after 2, 4, 7, 14, 30, 58 and 90 days. Both aggressive solution variations in solid phases and in different depths have been characterized. To each age and depth the calcium, magnesium and iron contents have been analyzed. Hydrated phases evolution studied, using thermal analysis, and crystalline compound changes, using X ray diffraction have been also analyzed. Sodium sulphate and water solutions stabilize an outer pH near to 8 in short time, however the stability of the most pH dependent phases is not the same. Although having similar pH and existing the possibility of forming a plaster layer near to the calcium leaching surface, this stability is greater than other sulphate solutions. Stability variations of solids formed by inverse diffusion, determine the rate of degradation.

Introducing non-linear analysis into sustained speech characterization to improve sleep apnea detection

We present a novel approach for detecting severe obstructive sleep apnea (OSA) cases by introducing non-linear analysis into sustained speech characterization. The proposed scheme was designed for providing additional information into our baseline system, built on top of state-of-the-art cepstral domain modeling techniques, aiming to improve accuracy rates. This new information is lightly correlated with our previous MFCC modeling of sustained speech and uncorrelated with the information in our continuous speech modeling scheme. Tests have been performed to evaluate the improvement for our detection task, based on sustained speech as well as combined with a continuous speech classifier, resulting in a 10% relative reduction in classification for the first and a 33% relative reduction for the fused scheme. Results encourage us to consider the existence of non-linear effects on OSA patients' voices, and to think about tools which could be used to improve short-time analysis.

Reduced order adaptive models for systems of PDEs using POD

In this work we propose a method to accelerate time dependent numerical solvers of systems of PDEs that require a high cost in computational time and memory. The method is based on the combined use of such numerical solver with a proper orthogonal decomposition, from which we identify modes, a Galerkin projection (that provides a reduced system of equations) and the integration of the reduced system, studying the evolution of the modal amplitudes. We integrate the reduced model until our a priori error estimator indicates that our approximation in not accurate. At this point we use again our original numerical code in a short time interval to adapt the POD manifold and continue then with the integration of the reduced model. Application will be made to two model problems: the Ginzburg-Landau equation in transient chaos conditions and the two-dimensional pulsating cavity problem, which describes the motion of liquid in a box whose upper wall is moving back and forth in a quasi-periodic fashion. Finally, we will discuss a way of improving the performance of the method using experimental data or information from numerical simulations

Modelización del registro y proceso de datos espectrales, referidos a superficies líticas, en un ámbito arqueológico.

La determinación del origen de un material utilizado por el hombre en la prehistoria es de suma importancia en el ámbito de la arqueología. En los últimos años, los estudios de procedencia han utilizado técnicas que suelen ser muy precisas pero con el inconveniente de ser metodologías de carácter destructivo. El fenómeno de la minería a gran escala es una de las características que acompaña al Neolítico, de ahí que la revolución correspondiente a este periodo sea una de las etapas más importantes para la humanidad. El yacimiento arqueológico de Casa Montero es una mina de sílex neolítica ubicada en la Península Ibérica, de gran importancia por su antigüedad y su escala productiva. Este sitio arqueológico corresponde a una cantera de explotación de rocas silícicas desarrollada en el periodo neolítico en la que solamente se han encontrado los desechos de la extracción minera, lo cual incrementa la variabilidad de las muestras analizadas, de las que se desconoce su contexto económico, social y cultural. Es de gran interés arqueológico saber por qué esos grupos neolíticos explotaban de forma tan intensiva determinados tipos de material y cuál era el destino de la cadena productiva del sílex. Además, por ser una excavación de rescate, que ha tenido que procesar varias toneladas de material, en un tiempo relativamente corto, requiere de métodos expeditivos de clasificación y manejo de dicho material. Sin embargo,la implementación de cualquier método de clasificación debe evitar la alteración o modificación de la muestra,ya que,estudios previos sobre caracterización de rocas silícicas tienen el inconveniente de alterar parcialmente el objeto de estudio. Por lo que el objetivo de esta investigación fue la modelización del registro y procesamiento de datos espectrales adquiridos de rocas silícicas del yacimiento arqueológico de Casa Montero. Se implementó la metodología para el registro y procesamiento de datos espectrales de materiales líticos dentro del contexto arqueológico. Lo anterior se ha conseguido con la aplicación de modelos de análisis espectral, algoritmos de suavizado de firmas espectrales, reducción de la dimensionalidad de las características y la aplicación de métodos de clasificación, tanto de carácter vectorial como raster. Para la mayoría de los procedimientos se ha desarrollado una aplicación informática validada tanto por los propios resultados obtenidos como comparativamente con otras aplicaciones. Los ensayos de evaluación de la metodología propuesta han permitido comprobar la eficacia de los métodos. Por lo que se concluye que la metodología propuesta no solo es útil para materiales silícicos, sino que se puede generalizar en aquellos procesos donde la caracterización espectral puede ser relevante para la clasificación de materiales que no deban ser alterados, además, permite aplicarla a gran escala, dado que los costes de ejecución son mínimos si se comparan con los de métodos convencionales. Así mismo, es de destacar que los métodos propuestos, representan la variabilidad del material y permiten relacionarla con el estado del yacimiento, según su contenido respecto de las tipologías de la cadena operativa. ABSTRACT: The determination of the origin of a material used by man in prehistory is very important in the field of archaeology. In recent years the provenance studies have used techniques that tend to be very precise but with the drawback of being destructive methodologies. The phenomenon of mining on a large scale is a feature that accompanies the Neolithic period; the Neolithic revolution is one of the most important periods of humanity. The archaeological site of Casa Montero is a Neolithic flint mine located in the Iberian Peninsula of great importance for its antiquity and its scale. This archaeological site corresponds to a quarry exploitation of silicic rocks developed in the Neolithic period, in which only found debris from mining, which increases the variability of the samples analyzed, including their economic, social and cultural context is unknown. It is of great archaeological interest to know why these Neolithic groups exploited as intensive certain types of material and what the final destination of flint was in the productive chain. In addition, being an excavation of rescue that had to process several tons of material in a relatively short time requires expeditious methods of classification and handling of the material. However, the implementation of any method of classification should avoid the alteration or modification of the sample, since previous studies on characterization of silicic rocks have the disadvantage of destroying or partially modify the object of study. So the objective of this research wasthe modeling of the registration and processing of acquired spectral data of silicic rocks of the archaeological site of Casa Montero. The methodology implemented for modeling the registration and processing of existing spectral data of lithic materials within the archaeological context, was presented as an alternative to the conventional classification methods (methods destructive and expensive) or subjective methods that depend on the experience of the expert. The above has been achieved with the implementation of spectral analysis models, smoothing of spectral signatures and the dimensionality reduction algorithms. Trials of validation of the proposed methodology allowed testing the effectiveness of the methods in what refers to the spectral characterization of siliceous materials of Casa Montero. Is remarkable the algorithmic contribution of the signal filtering, improve of quality and reduction of the dimensionality, as well the proposal of using raster structures for efficient storage and analysis of spectral information. For which it is concluded that the proposed methodology is not only useful for siliceous materials, but it can be generalized in those processes where spectral characterization may be relevant to the classification of materials that must not be altered, also allows to apply it on a large scale, given that the implementation costs are minimal when compared with conventional methods.

Asymptotic Description of Flutter Amplitude Saturation by Nonlinear Friction Forces

The computation of the non-linear vibration dynamics of an aerodynamically unstable bladed-disk is a formidable numerical task, even for the simplified case of aerodynamic forces assumed to be linear. The nonlinear friction forces effectively couple dif- ferent travelling waves modes and, in order to properly elucidate the dynamics of the system, large time simulations are typically required to reach a final, saturated state. Despite of all the above complications, the output of the system (in the friction microslip regime) is basically a superposition of the linear aeroelastic un- stable travelling waves, which exhibit a slow time modulation that is much longer than the elastic oscillation period. This slow time modulation is due to both, the small aerodynamic effects and the small nonlinear friction forces, and it is crucial to deter- mine the final amplitude of the flutter vibration. In this presenta- tion we apply asymptotic techniques to obtain a new simplified model that captures the slow time dynamics of the amplitudes of the travelling waves. The resulting asymptotic model is very re- duced and extremely cheap to simulate, and it has the advantage that it gives precise information about the characteristics of the nonlinear friction models that actually play a role in the satura- tion of the vibration amplitude.

PROFILE AND THE QUALITY OF LIFE OF LOGGERS

RESUMO – Objetivou-se com este estudo caracterizar o perfil e avaliar o nível de satisfação que reflete na qualidade de vida no trabalho (QVT) de trabalhadores da colheita de madeira de duas contratadas (C1 e C2), por duas grandes empresas do setor florestal, sendo uma do segmento de papel e celulose (PC) e, a outra, do segmento de carvão vegetal (CV). A avaliação ocorreu a partir da percepção dos trabalhadores das contratadas em questão, utilizando um modelo pré-concebido que contempla 11 blocos ou dimensões referentes a variáveis intervenientes e definidores da QVT, englobando 48 trabalhadores em três categorias funcionais: operador de motosserra (7 trabalhadores da C1 PC e 10 da C2 CV), ajudante de motosserrista (7 trabalhadores da C1 PC e 8 da C2 CV) e operador de carregador florestal (11 trabalhadores da C1 PC e 5 da C2 CV). Os dados referentes às variáveis intervenientes na QVT foram obtidos a partir de escala fechada do tipo Likert, com os escores variando de 1 a 7, em que 1 correspondeu ao nível "bastante insatisfeito" e 7, ao nível "bastante satisfeito". O perfil dos trabalhadores é de pessoa jovem, baixo nível de escolaridade e pouco tempo de serviço na empresa. Quanto ao nível de satisfação no trabalho, constatou-se que os trabalhadores da C1 PC se encontravam "satisfeitos" e os da C2 CV, "mediamente satisfeitos" com o trabalho e as condições proporcionadas pelas respectivas empresas, apesar de estatisticamente não ter sido detectada diferença entre os valores médios encontrados nas duas situações, pelo teste de Mediana (P>0,01). Os fatores que mais contribuíram para esses resultados favoráveis foram os benefícios extras oferecidos pelas prestadoras de serviços, as condições de segurança no trabalho e o contentamento com o emprego formal. ABSTRACT – The objective of this study was to characterize profile and satisfaction level, which reflects the quality of life (QOL) of forest workers of two contracts for harvest activities, one in the pulp and paper industry (PI) and another in charcoal industry (CI). The evaluation of the satisfaction indexes was carried out according to the workers perception by using a model including 11 parameters to reflect these workers QOL. The group study of 48 workers encompassed three functional categories: chainsaw operators (7 from C1 and 10 from C2), chainsaw operator's assistant (7 from C1 and 8 from C2), and log loader operators (11 from C1 and 5 from C2). Data regarding the factors involved in QOL were collected from a closed, Likert-type scale with scores ranging from 1-7, in which level 1 corresponded to "very dissatisfied" and level 7 to "very satisfied". The general profile of the group shows that most of them are young, with low level of education and employed in the companies for a short time. Overall, the employees of contractors of the paper and pulp industry are "satisfied" and those working for the charcoal company are only "moderately satisfied" with the work and policies offered by the respective companies, although no significant statistical difference was detected between the two groups, for the median test (P> 0.01). The main reasons behind these results are the general beneficts offered by the companies, the safety measurements and the overall satisfaction for been employed.

Asymptotic Description of Flutter Amplitude Saturation by Nonlinear Friction Forces

The computation of the non-linear vibration dynamics of an aerodynamically unstable bladed-disk is a formidable numerical task, even for the simplified case of aerodynamic forces assumed to be linear. The nonlinear friction forces effectively couple dif- ferent travelling waves modes and, in order to properly elucidate the dynamics of the system, large time simulations are typically required to reach a final, saturated state. Despite of all the above complications, the output of the system (in the friction microslip regime) is basically a superposition of the linear aeroelastic un- stable travelling waves, which exhibit a slow time modulation that is much longer than the elastic oscillation period. This slow time modulation is due to both, the small aerodynamic effects and the small nonlinear friction forces, and it is crucial to deter- mine the final amplitude of the flutter vibration. In this presenta- tion we apply asymptotic techniques to obtain a new simplified model that captures the slow time dynamics of the amplitudes of the travelling waves. The resulting asymptotic model is very re- duced and extremely cheap to simulate, and it has the advantage that it gives precise information about the characteristics of the nonlinear friction models that actually play a role in the satura- tion of the vibration amplitude.

Evaluation and improvement of empirical models of global solar irradiation: Case study northern Spain

This paper presents a new methodology to build parametric models to estimate global solar irradiation adjusted to specific on-site characteristics based on the evaluation of variable im- portance. Thus, those variables higly correlated to solar irradiation on a site are implemented in the model and therefore, different models might be proposed under different climates. This methodology is applied in a study case in La Rioja region (northern Spain). A new model is proposed and evaluated on stability and accuracy against a review of twenty-two already exist- ing parametric models based on temperatures and rainfall in seventeen meteorological stations in La Rioja. The methodology of model evaluation is based on bootstrapping, which leads to achieve a high level of confidence in model calibration and validation from short time series (in this case five years, from 2007 to 2011). The model proposed improves the estimates of the other twenty-two models with average mean absolute error (MAE) of 2.195 MJ/m2 day and average confidence interval width (95% C.I., n=100) of 0.261 MJ/m2 day. 41.65% of the daily residuals in the case of SIAR and 20.12% in that of SOS Rioja fall within the uncertainty tolerance of the pyranometers of the two networks (10% and 5%, respectively). Relative differences between measured and estimated irradiation on an annual cumulative basis are below 4.82%. Thus, the proposed model might be useful to estimate annual sums of global solar irradiation, reaching insignificant differences between measurements from pyranometers.

Procesos de dualización en la sociedad de la información: algunas polémicas públicas de índole tecnológica

La tecnología ha cambiado el mundo, pero las consecuencias de estos cambios en la sociedad no siempre se han pronosticado bien. Las Tecnologías de la Información transformaron el método de producción industrial. La nueva industria produce ideas y conceptos, no objetos. Este cambio ha dado como resultado una sociedad dualizada, ha desaparecido gran parte de la clase media y han aumentado las diferencias entre la clase alta y la baja. Las exigencias educativas de los nuevos puestos de trabajo innovadores son superiores a los de la industria tradicional, pero inferiores en los puestos de trabajo de producción. Además, el número de puestos de trabajo disponibles de este tipo es menor que en la industria tradicional, se necesita menos mano de obra, los procesos se pueden automatizar, las tareas mecánicas se aprenden en poco tiempo y son trabajos temporales, cuyo número dependerá de la demanda global. Para que el proceso de innovación funcione, las empresas se reúnen en las zonas financieras de grandes ciudades, como Nueva York o Londres, que fueron las primeras con acceso a las redes de telecomunicación. De esta manera se producen sinergias que contribuyen a mejorar el proceso innovador global. Estas ideas y conceptos que cambian el mundo necesitan de este entorno de producción, que no puede ser replicado, y son tan importantes que su acceso está restringido para la mayor parte del mundo por distintos mecanismos de control. El despliegue de las redes de telecomunicaciones inalámbricas ha sido enorme en los últimos años. El cliente busca llamar desde cualquier lugar y llevar un acceso a Internet en teléfono móvil. Para conseguirlo, las operadoras de telefonía móvil necesitan poner antenas de telefonía móvil en las ciudades, pero la instalación cerca de edificios no está siendo fácil. Pocos quieren tener una antena cerca por los problemas de salud de las personas que padecen los que ya viven o trabajan cerca de una. Los efectos del electromagnetismo en los seres humanos no están claros y provocan desconfianza hacia las antenas. La digitalización de los contenidos, que ha sido necesaria para transmitir contenido en Internet, permite que cualquier persona con un ordenador y una conexión a Internet pueda publicar un disco, una película o un libro. Pero esa persona también puede copiar los originales y enviarlos a cualquier lugar del mundo sin el permiso del autor. Con el fin de controlar la copia no autorizada, los derechos de autor se están usando para cambiar leyes e incluir sistemas de censura en Internet. Estos sistemas permiten a los autores eliminar el contenido ilegal, pero también pueden ser usados para censurar cualquier tipo de información. El control de la información es poder y usarlo de una manera o de otra afecta a todo el planeta. El problema no es la tecnología, que es solo una herramienta, es la forma que tienen los gobiernos y las grandes empresas de usarlo. Technology has changed the world, but the consequences of these changes in society have not always been well predicted. The Information Technology transformed the industrial production method. The new industry produces ideas and concepts, not objects. This change has resulted in a society dualized, most of the middle class has disappeared and the differences between high and low class have increased. The educational requirements of new innovative jobs are higher than the ones of the traditional industry, but lower in production jobs. Moreover, the number of available jobs of this type is lower than in the traditional industry, it takes less manpower, processes can be automated, mechanical tasks are learned in a short time and jobs are temporary, whose number depends on global demand. For the innovation process works, companies meet in the business districts of large cities, like New York or London, which were the first with access to telecommunications networks. This will produce synergies that improve the overall innovation process. These ideas and concepts that change the world need this production environment, which cannot be replicated, and are so important that their access is restricted to most of the world by different control mechanisms. The deploy of wireless telecommunications networks has been enormous in recent years. The client seeks to call from anywhere and to bring Internet access in his mobile phone. To achieve this, mobile operators need to put cell towers in cities, but the installation near buildings is not being easy. Just a few want to have an antenna closely because of the health problems suffered by people who already live or work near one. The effects of electromagnetism in humans are unclear and cause distrust of antennas. The digitization of content, which has been necessary to transmit Internet content, allows anyone with a computer and an Internet connection to be able to publish an album, a movie or a book. But that person can also copy the originals and send them anywhere in the world without the author's permission. In order to control the unauthorized copying, copyright is being used to change laws and include Internet censorship systems. These systems allow authors to eliminate illegal content, but may also be used to censor any information. The control of knowledge is power and using it in one way or another affects the whole planet. The problem is not technology, which is just a tool, but the way that governments and large corporations use it.