Determination of the maximum force due to skull impact in fights between sheep of the Ovis aries species

The present article presents a means of determining the maximum impact force between two bodies from the determination of the involved impulse in the impact and the sound emitted by the shock of the bodies during this impact.It also presents a case study applied to the shock between the skulls of male sheep of the Ovis aries species. These animals do not possess horns and dispute the territorial leadership by fighting, during which the skull is used as a weapon of attack, similar to a battering ram.Initially, a revision of basic physics approaching the theory of impulse is made, which shows that the average force during an impact can be obtained by the quantity of movement of the bodies. In its turn, the quantity of movement is obtained through the average speed of approach and the mass of the bodies. The maximum force is obtained from the average force, using the approach of the Force X Time curve with the Sonorous Intensity X Time Curve.In order to study the case of a shock between two sheep, the mass of the bodies was obtained through direct weighing and the average speed of approach obtained indirectly through filming, thus making possible the calculation of the average force. The Sonorous Intensity X Time Curve was obtained through the recording of the sound of the impact during a filmed fight, with later manipulation through computer programs. With this data the maximum force exercised between the skull of the sheep during the impact was obtained, which will be used in later studies.

Electrostatic force microscopy as a tool to estimate the number of active potential barriers in dense non-Ohmic polycrystalline SnO2 devices

In the present work, electroactive grain boundaries of highly dense metal oxide SnO2-based polycrystalline varistors were determined by electrostatic force microscopy (EFM). The EFM technique was applied to identify electroactive grain boundaries and thus estimate the amount of active grain boundary, which, in the metal oxide SnO2-based varistor, was calculated at around 85%, i.e., much higher than that found in traditional metal oxide ZnO-based varistors. The mean potential barrier height value obtained from the EFM analysis was in complete agreement with the values calculated from the C-V measurements, together with a complex capacitance plane analysis that validates the methodology proposed here. (c) 2006 American Institute of Physics.

Productive and reproductive performance in cattle infected with bovine leukosis virus

Economic losses caused by enzootic bovine leukosis (EBL) have been of interest since World War II, when the neoplastic form of EEL increased dramatically in Europe. Olson (1974) and House et al. (1975) ed that animals with lymphosarcoma caused by the bovine leukosis virus (BLV) had reduced milk yields. a less efficient reproductive performance and high veterinary costs and mortality rates, while many carcasses were rejected at slaughter. However, the actual impact of BLV infection in cattle without lymphosarcoma is not; clear. The purpose of the study reported here was to compare some productive and reproductive responses of cattle that were antibody-positive (BLV+) or negative (BLV-) for BLV.Holstein dairy cows in commercial dairy farms were used in this study. Blood samples were collected and subjected to BLV serological examination by the agar gel immunodiffusion test of Miller & van der Maaten (1976). Animals were then grouped as BLV+ or BLV- according to their serological response to the BLV antigen. Productive and reproductive histories were obtained from individual animal records and the following factors were considered: milk production, calving interval and birth rate. For milk production, we had the daily milk yields of 547 animals, and for calving interval the time between two successive parturitions for 444 cows. These values were examined by ANOVA and when this was significant a Student's t test was carried out for each age group. Birth rates, the percentage of animals that calved in 1 gear, were available for 557 animals and were examined with the Z-two proportion test. For all analyses, P < 0.05 was considered significant.

Dissociated time course recovery between rate of force development and peak torque after eccentric exercise

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of biofertilizer rates on the structural, morphogenetic and productive characteristics of Piata grass

The objective of this study was to investigate the influence of different levels of biofertilizers from cattle and swine manure on the structural, morphogenetic and productive characteristics of Brachiaria brizantha cv. Piata. The experiment was arranged in a completely randomized factorial design with split plots. The plots were defined by eight treatments: two biofertilizers (cattle and swine), four levels (0, 100, 200 and 300 kg N.ha(-1)) and subplots by four different cutting periods. The cutting for plant uniformity was performed at 45 days after sowing at 15 cm above the soil surface. The biofertilizeres were applied in a single level, after the cutting of plants, in rates of 0, 0.23 and 0.19, 0.45 and 0.38, 0.68 and 0.57 liters pot(-1) for the biofertilizers from cattle and swine manure, respectively. These rates were also equivalent to levels of 0, 100, 200 and 300 kg N.ha(-1). There was no significant difference between the types of biofertilizers as there was no interaction between them and the different levels, hence both biofertilizers could be applied without any loss of nutrient intake by the plants used in this experiment. There was a significant difference between the production of green and dry matter, the leaf appearance rate, phyllochron, leaf and pseudostem elongation rates, number of green leaves, final leaf length, number and weight of tillers, according to the increase of nitrogen rates, following linear prediction model. Effect of the cutting periods was also observed, once the plants harvested during the summer presented greater performance of structural and morphogenetic characteristics.

Productive and reproductive performance of heifers fed different levels of urea in the diet

The objective of the present study was to evaluate the nutrient intake, blood parameters, follicular diameter and performance of pre-puberty crossbred heifers fed isoproteic diets (14.1%CP) containing 0.0; 0.44; 0.88 and 1.32% urea on the total dry matter (DM) of the diet, with a 77:23 roughage:concentrate ratio. Twenty-four 18- month old heifers (Holstein x Zebu), 277.9 kg mean live weight (LW) were used, distributed in four treatments and six replications in a randomized complete design. The following were evaluated: dry matter intake (DM), crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF), ether extract (EE), hemicellulose (HEM), plasmatic ureic nitrogen (PUN), plasmatic glucose, plasmatic total cholesterol, follicular diameter and daily weight gain (DWG). No influence of the urea levels in the diet was observed on NDF and HEM intake. A maximum intake was obtained of DM (8.75 kg day(-1)), CP (0.88 kg day(-1)), ADF (2.5 kg day(-1)) and EE (0.17 kg day(-1)) respectively for the levels 0.7, 0.8, 0.7 and 0.7% urea in total DM. The 0.6%; 0.77% and 0.6% urea levels in diet were the critical points for obtaining maximum response for the PUN (10.96 mg dL(-1)) and plasmatic glucose (84.97 mg dL(-1)) concentrations and, for follicular diameter (11.08 mm) on the 40(th); 24(th) and 31(st) day, respectively. The plasmatic total cholesterol concentration and DWG were not influenced by the urea added to the diet, with averages of 119.39 mg dL(-1) and 1.66 kg day(-1), respectively. It was concluded that urea can be added up to 1.32% on the total DM of the diet for pre-puberty crossbred heifers.

Force patterns of hypoxic myocardium applied to oxygenated muscle preparations: Comparison with effects of regional ischemia on the contraction of non-ischemic myocardium

Objective: To examine the basis for local wall motion abnormalities commonly seen in patients with ischemic heart disease, computer-controlled isolated muscle studies were carried out. Methods: Force patterns of physiologically sequenced contractions (PSCs) from rat left ventricular muscle preparations under well-oxygenated conditions and during periods of hypoxia and reoxygenation were recorded and stored in a computer. Force patterns of hypoxic-reoxygenating and oxygenated myocardium were applied to oxygenated and hypoxic-reoxygenating myocardium, respectively. Results: Observed patterns of shortening and lengthening closely resemble those obtained from ischemic and non-ischemic myocardial segments using ultrasonic crystals in intact dog hearts during coronary occlusion and reperfusion, and are similar to findings reported in angiographic studies of humans with coronary artery disease. Conclusion: The current study, demonstrating motions of oxygenated isolated muscle preparations which are similar to those in perfused segments of intact hearts with regional ischemia, supports the concept that the multiple motions of both ischemic and non-ischemic segments seen in regional myocardial disease can be explained by interactions of strongly and weakly contracting muscle during the physiologic cardiac cycle.

Gravitational Lorentz force and the description of the gravitational interaction

In the context of a gauge theory for the translation group, we have obtained, for a spinless particle, a gravitational analogue of the Lorentz force. Then, we have shown that this force equation can be rewritten in terms of magnitudes related to either the teleparallel or the Riemannian structures induced in spacetime by the presence of the gravitational field. In the first case, it gives a force equation, with torsion playing the role of force. In the second, it gives the usual geodesic equation of general relativity. The main conclusion is that scalar matter is able to feel any one of the above spacetime geometries, the teleparallel and the metric ones. Furthermore, both descriptions are found to be completely equivalent in the sense that they give the same physical trajectory for a spinless particle in a gravitational field.

Chaotic oscillation in an attractive Bose-Einstein condensate under an impulsive force

The chaotic oscillation in an attractive Bose-Einstein condensate (BEC) under an impulsive force was discussed using mean-field Gross-Pitaevskii (GP) equation. It was found that sustained chaotic oscillation resulted in a BEC under the action of an impulsive force generated by suddenly changing the interatomic scattering length or the harmonic oscillator trapping potential. The analysis suggested that the final state interatomic attraction played an important role in the generation of the chaotic dynamics.

Nile tilapia, Oreochromis niloticus, productive performance and carcass characteristics as related to food management

Male juveniles of Nile tilapia, Oreochromis niloticus, were stocked in 12, 300-m 2 ponds at a density of 1.7 fish/m 2 to evaluate the effects of different food management methods (natural foods and diets in pellet, floating or minced form) on fish production and carcass characteristics. Water quality variables monitored during the period were within acceptable levels for the species. Total fish production was significantly different (P < 0.05) and the highest values were obtained with diets in pellet (5,997 kg/ha) and floating (5,441 kg/ha) form. The fish fed diets had higher contents of body fat (1.57 to 1.98%) and visceral fat (12.64 to 25.04%) than fish fed natural food, which had levels between 0.17 and 0%, respectively. Natural food treatment yielded lower fish production and fish with lower body fat, while treatments that yielded higher fish production (rations) higher percentage of visceral fat. © 2004 by The Haworth Press, Inc. All rights reserved.

Charge density alterations in human hair fibers: An investigation using electrostatic force microscopy

A new method for high-resolution analyses of hair surface charge density under ambient conditions is presented in this paper. Electrostatic force microscopy (EFM) is used here to analyze changes in surface charge density in virgin hair, bleached hair, and hair treated with a cationic polymer. The atomic force microscopy technique is used concomitantly to analyze morphological changes in hair roughness and thickness. The EFM images depict exactly how the polymer is distributed on the surface of the hair fiber. The EFM's powerful analytical tools enabled us to evaluate the varying degrees of interaction between the hair fiber surface charge density and the cationic polymer. The surface charge density and the polymer's distribution in the hair fibers are presented in the light of EFM measurements. © 2006 Society of Cosmetic Scientists and the Socièété Française de Cosmétologie.

Experimental study of the centripetal force

We describe an experimental set-up for studying and determining the centripetal force acting on a body whose mass and radius of circular trajectory are known. The experimental behaviour is determined and compared with theoretical predictions by using a system that allows for the evaluation of the angular velocity by means of electric current measurements, and by assuming a potential dependence of the force on the body mass, radius and angular velocity. © 2007 IOP Publishing Ltd.

Effects of taper on swimming force and swimmer performance after an experimental ten-week training program

Papoti, M., L.E.B. Martins, S.A. Cunha, A.M. Zagatto, and C.A. Gobatto. Effects of taper on swimming force and swimmer performance after an experimental ten-week training program. J. Strength Cond. Res. 21(2):538-542. 2007.- The purpose of this research was to examine how an 11-day taper after an 8.5-week experimental training cycle affected lactate levels during maximal exercise, mean force, and performance in training swimmers, independent of shaving, psychological changes, and postcompetition effects. Fourteen competition swimmers with shaved legs and torsos were recruited from the São Paulo Aquatic Federation. The training cycle consisted of a basic training period (endurance and quality phases) of 8.5 weeks, with 5,800 m·d -1 mean training volume and 6 d·wk -1 frequency; and a taper period (TP) of 1.5 weeks' duration that incorporated a 48% reduction in weekly volume without altering intensity. Attained swimming force (SF) and maximal performance over 200m maximal swim (Pmax) before and after taper were measured. After taper, SF and Pmax improved 3.6 and 1.6%, respectively (p < 0.05). There were positive correlations (p < 0.05) between SF and Pmax before (r = 0.86) and after (r = 0.83) the taper phase. Peak lactate concentrations after SF were unaltered before (6.79 ± 1.2 mM) and after (7.15 ± 1.8 mM) TP. Results showed that TP improved mean swimming velocity, but not in the same proportion as force after taper, suggesting that there are other factors influencing performance in faster swimming. © 2007 National Strength & Conditioning Association.

Consequences of quadratic frictional force on the one dimensional bouncing ball model

Some dynamical properties of the one dimensional Fermi accelerator model, under the presence of frictional force are studied. The frictional force is assumed as being proportional to the square particle's velocity. The problem is described by use of a two dimensional non linear mapping, therefore obtained via the solution of differential equations. We confirm that the model experiences contraction of the phase space area and in special, we characterized the behavior of the particle approaching an attracting fixed point. © 2007 American Institute of Physics.