Voimalaitoksen toiminnallinen suunnittelu

Diplomityön tavoitteena oli antaa kuva vastapainevoimalaitoksen automaation toiminnallisesta suunnittelusta ja soveltaa teoriaa suunnittelemalla toiminnallisuus vesihöyrypiirin tärkeimmille osuuksille. Työssä on esitelty tyypillinen EPCM-voimalaitosprojekti, joka toteutetaan ulkopuolisen avustajan kanssa tehdyllä yhteistyöllä. Projektin koostuu laitoksen suunnittelu-, rakennus-, asennus- sekä käyttöönottovaiheista. Huomioitavia asioita ovat mm. projektin budjetti sekä aikataulu. Valvonnalla on suuri merkitys projektin onnistumiseen. Lisäksi työssä esitellään vastapainevoimalaitoksen vesihöyrypiirin prosessi, pääsäädöt sekä automaatiojärjestelmä. Vesihöyrypiirillä tarkoitetaan syöttövesi-, höyry- ja kaukolämpöjärjestelmää. Pääsäädöillä pyritään saamaan tuotanto vastaamaan kulutusta. Voimalaitoksen painopiste on kaukolämmön tuottaminen. Automaatiojärjestelmän toiminnoilla tarkoitetaan järjestelmän suorittamia ohjauksia, säätöjä sekä hälytyksiä. Toiminnallisessa suunnittelussa tehdään toimilaitteille niin yksittäisohjaukset, säädöt kuin hälytysluettelot. Työssä tehty toiminnallinen suunnittelu keskittyy erityisesti toimilaitteiden säätöpiireihin. Säätöpiirit koostuvat tärkeimmistä prosessiin liittyvistä komponenteista ja säätömerkeistä. Toiminnallisen suunnittelun dokumentaatioita käytetään automaatiojärjestelmän sovellusohjelmoinnin pohjana.

Emergent power hierarchies and group performance (Published online: 7 Oct. 2014)

In newly formed groups, informal hierarchies emerge automatically and readily. In this study, we argue that emergent group hierarchies enhance group performance (Hypothesis 1) and we assume that the more the power hierarchy within a group corresponds to the task-competence differences of the individual group members, the better the group performs (Hypothesis 2). Twelve three-person groups and 28 four-person groups were investigated while solving the Winter Survival Task. Results show that emerging power hierarchies positively impact group performance but the alignment between task-competence and power hierarchy did not affect group performance. Thus, emergent power hierarchies are beneficial for group performance and although they were on average created around individual group members' competence, this correspondence was not a prerequisite for better group performance.

A model of gender prejudice, power, and discrimination: How hierarchy-enhancing factors predominate over hierarchy-attenuating factors

Gender inequalities remain an issue in our society and particularly in the workplace. Several factors can explain this gender difference in top-level managerial positions such as career ambitions but also biases against women. In our chapter, we propose a model explaining why gender inequalities and particularly discrimination against women is still present in our societies despite social norms and existing legislation on gender equality. To this purpose, we review research on discrimination through two different approaches, (a) a prejudice approach through the justification-suppression model developed by Crandall and Eshleman (2003) and (b) a power approach through the social dominance theory (Pratto, Sidanius, Stallworth, & Malle, 1994; Sidanius & Pratto, 1999). In our work, we integrate these two approaches and propose a model of gender prejudice, power and discrimination. The integration of these two approaches contributes to a better understanding of how discrimination against women is formed and maintained over time.

Effect of Smoking on Blood Pressure and Resting Heart Rate: A Mendelian Randomization Meta-Analysis in the CARTA Consortium.

BACKGROUND: Smoking is an important cardiovascular disease risk factor, but the mechanisms linking smoking to blood pressure are poorly understood. METHODS AND RESULTS: Data on 141 317 participants (62 666 never, 40 669 former, 37 982 current smokers) from 23 population-based studies were included in observational and Mendelian randomization meta-analyses of the associations of smoking status and smoking heaviness with systolic and diastolic blood pressure, hypertension, and resting heart rate. For the Mendelian randomization analyses, a genetic variant rs16969968/rs1051730 was used as a proxy for smoking heaviness in current smokers. In observational analyses, current as compared with never smoking was associated with lower systolic blood pressure and diastolic blood pressure and lower hypertension risk, but with higher resting heart rate. In observational analyses among current smokers, 1 cigarette/day higher level of smoking heaviness was associated with higher (0.21 bpm; 95% confidence interval 0.19; 0.24) resting heart rate and slightly higher diastolic blood pressure (0.05 mm Hg; 95% confidence interval 0.02; 0.08) and systolic blood pressure (0.08 mm Hg; 95% confidence interval 0.03; 0.13). However, in Mendelian randomization analyses among current smokers, although each smoking increasing allele of rs16969968/rs1051730 was associated with higher resting heart rate (0.36 bpm/allele; 95% confidence interval 0.18; 0.54), there was no strong association with diastolic blood pressure, systolic blood pressure, or hypertension. This would suggest a 7 bpm higher heart rate in those who smoke 20 cigarettes/day. CONCLUSIONS: This Mendelian randomization meta-analysis supports a causal association of smoking heaviness with higher level of resting heart rate, but not with blood pressure. These findings suggest that part of the cardiovascular risk of smoking may operate through increasing resting heart rate.

Supplier Energy Audits in Thermal Power Plants

This master’s thesis handles an operating model for an electric equipment supplier conducted sale oriented energy audit for pumping, fan and other motor applications at power plants. The study goes through the largest factors affecting internal electricity use at a power plant, finds an energy audit –like approach for the basis of information gathering and presents the information needed for conducting the analysis. The model is tested in practice at a kraft recovery boiler of a chemical pulping mill. Targets chosen represent some of the largest electric motor applications in the boiler itself and in its fuel handling. The energy saving potential of the chosen targets is calculated by simulating the energy consumption of the alternatives for controlling the targets, and thereafter combining the information with the volume flow duration curve. Results of the research are somewhat divaricated, as all the information needed is not available in the automation system. Some of the targets could be simulated and their energy saving potential calculated quite easily. At some of the targets chosen the monitoring was not sufficient enough for this and additional measurements would have been needed to base the calculations on. In traditional energy audits, energy efficiency of pump and fan applications is not necessarily examined. This means that there are good possibilities for developing the now presented targeted energy audit procedure basis further.

Cerebral oximetry and return of spontaneous circulation after cardiac arrest: A systematic review and meta-analysis.

AIM: The prediction of return of spontaneous circulation (ROSC) during resuscitation of patients suffering of cardiac arrest (CA) is particularly challenging. Regional cerebral oxygen saturation (rSO2) monitoring through near-infrared spectrometry is feasible during CA and could provide guidance during resuscitation. METHODS: We conducted a systematic review and meta-analysis on the value of rSO2 in predicting ROSC both after in-hospital (IH) or out-of-hospital (OH) CA. Our search included MEDLINE (PubMed) and EMBASE, from inception until April 4th, 2015. We included studies reporting values of rSO2 at the beginning of and/or during resuscitation, according to the achievement of ROSC. RESULTS: A total of nine studies with 315 patients (119 achieving ROSC, 37.7%) were included in the meta-analysis. The majority of those patients had an OHCA (n=225, 71.5%; IHCA: n=90, 28.5%). There was a significant association between higher values of rSO2 and ROSC, both in the overall calculation (standardized mean difference, SMD -1.03; 95%CI -1.39,-0.67; p<0.001), and in the subgroups analyses (rSO2 at the beginning of resuscitation: SMD -0.79; 95%CI -1.29,-0.30; p=0.002; averaged rSO2 value during resuscitation: SMD -1.28; 95%CI -1.74,-0.83; p<0.001). CONCLUSIONS: Higher initial and average regional cerebral oxygen saturation values are both associated with greater chances of achieving ROSC in patients suffering of CA. A note of caution should be made in interpreting these results due to the small number of patients and the heterogeneity in study design: larger studies are needed to clinically validate cut-offs for guiding cardiopulmonary resuscitation.

Dial M for Murder: A Case of Passion Killing, Criminal Evidence and Sultanic Power in Medieval India

This paper considers the structures and applications of the criminal judicial system in the Islamic Later Middle Period as it developed in India under the sultans of Delhi (1200-1400 CE). A fundamental issue in crime and punishment is the relationship between sultanic power and religious authority. Particularly at stake in this relationship is the question of who can sanction the highest form of punishment, i.e. the death penalty (siyāsa). Contemporary historians and scholars in the study of religion investigating the relationship between sharīʿa and siyāsa to reveal the extent and limits of sultanic power show a system of governance that allowed for the delegation of authority, particularly in the area of the judiciary, from the sultan down to viziers and judges. Some scholars depict the relationship between the ʿulamāʾ and the sultan as a kind of stand off. The actual dynamics of legal jurisdiction were much more complex. This study proposes a new interpretive framework for understanding the relationship between political power and religious authority through a critical analysis of the criminal judicial system, law, and historical narrative. In particular, I consider a murder case described by Shams al-dīn Sirāj ʿAfīf in one of the most significant histories written in the later Delhi Sultanate, the Tārīkh-i Fīrūzshāhī.

Seabirds and the circulation of Lyme borreliosis bacteria in the North Pacific

Seabirds act as natural reservoirs to Lyme borreliosis spirochetes and may play a significant role in the global circulation of these pathogens. While Borrelia burgdorferi sensu lato (Bbsl) has been shown to occur in ticks collected from certain locations in the North Pacific, little is known about interspecific differences in exposure within the seabird communities of this region. We examined the prevalence of anti-Bbsl antibodies in 805 individuals of nine seabird species breeding across the North Pacific. Seroprevalence varied strongly among species and locations. Murres (Uria spp.) showed the highest antibody prevalence and may play a major role in facilitating Bbsl circulation at a worldwide scale. Other species showed little or no signs of exposure, despite being present in multispecific colonies with seropositive birds. Complex dynamics may be operating in this wide scale, natural hostparasite system, possibly mediated by the host immune system and host specialization of the tick vector.

Power line communication in motor cables of variable-speed electric drives − analysis and

Data transmission between an electric motor and a frequency converter is required in variablespeed electric drives because of sensors installed at the motor. Sensor information can be used for various useful applications to improve the system reliability and its properties. Traditionally, the communication medium is implemented by an additional cabling. However, the costs of the traditional method may be an obstacle to the wider application of data transmission between a motor and a frequency converter. In any case, a power cable is always installed between a motor and a frequency converter for power supply, and hence it may be applied as a communication medium for sensor level data. This thesis considers power line communication (PLC) in inverter-fed motor power cables. The motor cable is studied as a communication channel in the frequency band of 100 kHz−30 MHz. The communication channel and noise characteristics are described. All the individual components included in a variable-speed electric drive are presented in detail. A channel model is developed, and it is verified by measurements. A theoretical channel information capacity analysis is carried out to estimate the opportunities of a communication medium. Suitable communication and forward error correction (FEC) methods are suggested. A general method to implement a broadband and Ethernet-based communication medium between a motor and a frequency converter is proposed. A coupling interface is also developed that allows to install the communication device safely to a three-phase inverter-fed motor power cable. Practical tests are carried out, and the results are analyzed. Possible applications for the proposed method are presented. A speed feedback motor control application is verified in detail by simulations and laboratory tests because of restrictions for the delay in the feedback loop caused by PLC. Other possible applications are discussed at a more general level.